Analysis of the discharge capacity of radial-gated spillways using CFD and ANN - Oliana Dam case study.

The paper focuses on the analysis of radial-gated spillways, which is carried out by the solution of a numerical model based on the finite element method (FEM). The Oliana Dam is considered as a case study and the discharge capacity is predicted both by the application of a level-set-based free-surface solver and by the use of traditional empirical formulations. The results of the analysis are then used for training an artificial neural network to allow real-time predictions of the discharge in any situation of energy head and gate opening within the operation range of the reservoir. The comparison of the results obtained with the different methods shows that numerical models such as the FEM can be useful as a predictive tool for the analysis of the hydraulic performance of radial-gated spillways.

Experimental and numerical analysis of concrete Slabs subjected to Blast

This paper summarizes the research activities focused on the behaviour of concrete and concrete structures subjected to blast loading carried out by the Department of Materials Science of the Technical University of Madrid (PUM). These activities comprise the design and construction of a test bench that allows for testing up to four planar concrete specimens with one single explosion, the study of the performance of different protection concepts for concrete structures and, finally, the development of a numerical model for the simulation of concrete structural elements subjected to blast. Up to date 6 different types of concrete have been studied, from plain normal strength concrete, to high strength concrete, including also fibre reinforced concretes with different types of fibres. The numerical model is based on the Cohesive Crack Model approach, and has been developed for the LSDYNA finite element code through a user programmed subroutine. Despite its simplicity, the model is able to predict the failure patterns of the concrete slabs tested with a high level of accuracy

Mathematical Analysis of the Effect of Rotor Geometry on Cup Anemometer Response

The calibration coefficients of two commercial anemometers equipped with different rotors were studied. The rotor cups had the same conical shape, while the size and distance to the rotation axis varied.The analysis was based on the 2-cup positions analytical model, derived using perturbation methods to include second-order effects such as pressure distribution along the rotating cups and friction.Thecomparison with the experimental data indicates a nonuniformdistribution of aerodynamic forces on the rotating cups, with higher forces closer to the rotating axis. The 2-cup analytical model is proven to be accurate enough to study the effect of complex forces on cup anemometer performance.

Analysis of pixel-mapping rounding on geometric distortion as a prediction for view synthesis distortion

We analyze the performance of the geometric distortion, incurred when coding depth maps in 3D Video, as an estimator of the distortion of synthesized views. Our analysis is motivated by the need of reducing the computational complexity required for the computation of synthesis distortion in 3D video encoders. We propose several geometric distortion models that capture (i) the geometric distortion caused by the depth coding error, and (ii) the pixel-mapping precision in view synthesis. Our analysis starts with the evaluation of the correlation of geometric distortion values obtained with these models and the actual distortion on synthesized views. Then, the different geometric distortion models are employed in the rate-distortion optimization cycle of depth map coding, in order to assess the results obtained by the correlation analysis. Results show that one of the geometric distortion models is performing consistently better than the other models in all tests. Therefore, it can be used as a reasonable estimator of the synthesis distortion in low complexity depth encoders.

Efficiency analysis of information technology and online social networks management : an integrated DEA-Model assessment

This paper analyses the relationship between productive efficiency and online-social-networks (OSN) in Spanish telecommunications firms. A data-envelopment-analysis (DEA) is used and several indicators of business ?social Media? activities are incorporated. A super-efficiency analysis and bootstrapping techniques are performed to increase the model?s robustness and accuracy. Then, a logistic regression model is applied to characterise factors and drivers of good performance in OSN. Results reveal the company?s ability to absorb and utilise OSNs as a key factor in improving the productive efficiency. This paper presents a model for assessing the strategic performance of the presence and activity in OSN.

Experimental analysis of a photovoltaic concentrator based on a single reflective stage immersed in an optical fluid

This article reviews all the experimental tests carried out to analyze the performance of a FluidReflex photovoltaic concentrator. This novel concentrator concept consists of a single reflective stage immersed in an optical fluid. The presence of the fluid entails significant advantages. It not only allows a high system optical efficiency and increases the attainable concentration but also enhances the heat dissipation from the cell. In addition, the electrical insulation is improved, and the problem of water vapor condensation inside the module is avoided. A complete characterization is addressed in this paper. Among the experimental results, a measured optical efficiency of 83.5% for a concentration of 1035× stands out

Analysis of pattern recognition and dimensionality reduction techniques for odor biometrics

In this paper, we analyze the performance of several well-known pattern recognition and dimensionality reduction techniques when applied to mass-spectrometry data for odor biometric identification. Motivated by the successful results of previous works capturing the odor from other parts of the body, this work attempts to evaluate the feasibility of identifying people by the odor emanated from the hands. By formulating this task according to a machine learning scheme, the problem is identified with a small-sample-size supervised classification problem in which the input data is formed by mass spectrograms from the hand odor of 13 subjects captured in different sessions. The high dimensionality of the data makes it necessary to apply feature selection and extraction techniques together with a simple classifier in order to improve the generalization capabilities of the model. Our experimental results achieve recognition rates over 85% which reveals that there exists discriminatory information in the hand odor and points at body odor as a promising biometric identifier.

An Analysis Of The Recommended Knowledge For The Software Project Management Discipline

According to the PMBOK (Project Management Body of Knowledge), project management is “the application of knowledge, skills, tools, and techniques to project activities to meet the project requirements” [1]. Project Management has proven to be one of the most important disciplines at the moment of determining the success of any project [2][3][4]. Given that many of the activities covered by this discipline can be said that are “horizontal” for any kind of domain, the importance of acknowledge the concepts and practices becomes even more obvious. The specific case of the projects that fall in the domain of Software Engineering are not the exception about the great influence of Project Management for their success. The critical role that this discipline plays in the industry has come to numbers. A report by McKinsey & Co [4] shows that the establishment of programs for the teaching of critical skills of project management can improve the performance of the project in time and costs. As an example of the above, the reports exposes: “One defense organization used these programs to train several waves of project managers and leaders who together administered a portfolio of more than 1,000 capital projects ranging in Project management size from $100,000 to $500 million. Managers who successfully completed the training were able to cut costs on most projects by between 20 and 35 percent. Over time, the organization expects savings of about 15 percent of its entire baseline spending”. In a white paper by the PMI (Project Management Institute) about the value of project management [5], it is stated that: “Leading organizations across sectors and geographic borders have been steadily embracing project management as a way to control spending and improve project results”. According to the research made by the PMI for the paper, after the economical crisis “Executives discovered that adhering to project management methods and strategies reduced risks, cut costs and improved success rates—all vital to surviving the economic crisis”. In every elite company, a proper execution of the project management discipline has become a must. Several members of the software industry have putted effort into achieving ways of assuring high quality results from projects; many standards, best practices, methodologies and other resources have been produced by experts from different fields of expertise. In the industry and the academic community, there is a continuous research on how to teach better software engineering together with project management [4][6]. For the general practices of Project Management the PMI produced a guide of the required knowledge that any project manager should have in their toolbox to lead any kind of project, this guide is called the PMBOK. On the side of best practices 10 and required knowledge for the Software Engineering discipline, the IEEE (Institute of Electrical and Electronics Engineers) developed the SWEBOK (Software Engineering Body of Knowledge) in collaboration with software industry experts and academic researchers, introducing into the guide many of the needed knowledge for a 5-year expertise software engineer [7]. The SWEBOK also covers management from the perspective of a software project. This thesis is developed to provide guidance to practitioners and members of the academic community about project management applied to software engineering. The way used in this thesis to get useful information for practitioners is to take an industry-approved guide for software engineering professionals such as the SWEBOK, and compare the content to what is found in the PMBOK. After comparing the contents of the SWEBOK and the PMBOK, what is found missing in the SWEBOK is used to give recommendations on how to enrich project management skills for a software engineering professional. Recommendations for members of the academic community on the other hand, are given taking into account the GSwE2009 (Graduated Software Engineering 2009) standard [8]. GSwE2009 is often used as a main reference for software engineering master programs [9]. The standard is mostly based on the content of the SWEBOK, plus some contents that are considered to reinforce the education of software engineering. Given the similarities between the SWEBOK and the GSwE2009, the results of comparing SWEBOK and PMBOK are also considered valid to enrich what the GSwE2009 proposes. So in the end the recommendations for practitioners end up being also useful for the academic community and their strategies to teach project management in the context of software engineering.

Analysis of dehidration and strenth in elite badminton players

Background: The negative effects of dehydration on aerobic activities are well established. However, it is unknown how dehydration affects intermittent sports performance. The purpose of this study was to identify the level of dehydration in elite badminton players and its relation to muscle strength and power production. Methodology: Seventy matches from the National Spanish badminton championship were analyzed (46 men?s singles and 24 women?s singles). Before and after each match, jump height and power production were determined during a countermovement jump on a force platform. Participants? body weight and a urine sample were also obtained before and after each match. The amount of liquid that the players drank during the match was also calculated by weighing their individual drinking bottles. Results and Discussion: Sweat rate during the game was 1.1460.46 l/h in men and 1.0260.64 l/h in women. The players rehydrated at a rate of 1.1060.55 l/h and 1.0160.44 l/h in the male and female groups respectively. Thus, the dehydration attained during the game was only 0.3760.50% in men and 0.3260.83% in women. No differences were found in any of the parameters analyzed during the vertical jump (men: from 31.8265.29 to 32.9064.49 W/kg; p.0.05, women: from 26.3664.73 to 27.2564.44 W/kg; p.0.05). Post-exercise urine samples revealed proteinuria (60.9% of cases in men and 66.7% in women), leukocyturia (men = 43.5% and women = 50.0%) and erythrocyturia (men = 50.0% and women = 21.7%). Conclusions: Despite a moderate sweat rate, badminton players adequately hydrated during a game and thus the dehydration attained was low. The badminton match did not cause muscle fatigue but it significantly increased the prevalence of proteinuria, leukocyturia and erythrocyturia.

Comparative analysis of passenger transport sustainability in European cities

Sustainable development in its three dimensions – economic, social and environmental – has become a major concern on an international scale. The problem is global, but must be solved locally. Most of the world’s population lives in cities that act as centres of economic growth and productivity, but which – if they develop in the wrong direction – can cause social inequalities, or irreversibly harm the environment. Urban transport causes a number of negative impacts that can affect sustainability targets. The objective of this study is to propose an analysis of sustainability of urban passenger transport systems based on available indicators in most cities. This will serve to benchmark the practices of different cities and manage their transport systems. This work involves the creation of composite indicators (CI) to measure the sustainability of urban passenger transport systems. The methodology is applied to 23 European cities. The indicators are based on a benchmarking approach, and the evaluation of each aspect in each case therefore depends on the performance of the whole sample. The CI enabled us to identify which characteristics have the greatest influence on the sustainability of a city’s transport system, and to establish transport policies that could potentially improve its shortcomings. Finally, the cities are clustered according to the values obtained from the CIs, and thus according to the weaknesses and strengths of their transport systems.

Analysis of the geometric altimetry to support aircraft optimal trajectories within the future 4d trajectory management

Over the past few years, the common practice within air traffic management has been that commercial aircraft fly by following a set of predefined routes to reach their destination. Currently, aircraft operators are requesting more flexibility to fly according to their prefer- ences, in order to achieve their business objectives. Due to this reason, much research effort is being invested in developing different techniques which evaluate aircraft optimal trajectory and traffic synchronisation. Also, the inefficient use of the airspace using barometric altitude overall in the landing and takeoff phases or in Continuous Descent Approach (CDA) trajectories where currently it is necessary introduce the necessary reference setting (QNH or QFE). To solve this problem and to permit a better airspace management born the interest of this research. Where the main goals will be to evaluate the impact, weakness and strength of the use of geometrical altitude instead of the use of barometric altitude. Moreover, this dissertation propose the design a simplified trajectory simulator which is able to predict aircraft trajectories. The model is based on a three degrees of freedom aircraft point mass model that can adapt aircraft performance data from Base of Aircraft Data, and meteorological information. A feature of this trajectory simulator is to support the improvement of the strategic and pre-tactical trajectory planning in the future Air Traffic Management. To this end, the error of the tool (aircraft Trajectory Simulator) is measured by comparing its performance variables with actual flown trajectories obtained from Flight Data Recorder information. The trajectory simulator is validated by analysing the performance of different type of aircraft and considering different routes. A fuel consumption estimation error was identified and a correction is proposed for each type of aircraft model. In the future Air Traffic Management (ATM) system, the trajectory becomes the fundamental element of a new set of operating procedures collectively referred to as Trajectory-Based Operations (TBO). Thus, governmental institutions, academia, and industry have shown a renewed interest for the application of trajectory optimisation techniques in com- mercial aviation. The trajectory optimisation problem can be solved using optimal control methods. In this research we present and discuss the existing methods for solving optimal control problems focusing on direct collocation, which has received recent attention by the scientific community. In particular, two families of collocation methods are analysed, i.e., Hermite-Legendre-Gauss-Lobatto collocation and the pseudospectral collocation. They are first compared based on a benchmark case study: the minimum fuel trajectory problem with fixed arrival time. For the sake of scalability to more realistic problems, the different meth- ods are also tested based on a real Airbus 319 El Cairo-Madrid flight. Results show that pseudospectral collocation, which has shown to be numerically more accurate and computa- tionally much faster, is suitable for the type of problems arising in trajectory optimisation with application to ATM. Fast and accurate optimal trajectory can contribute properly to achieve the new challenges of the future ATM. As atmosphere uncertainties are one of the most important issues in the trajectory plan- ning, the final objective of this dissertation is to have a magnitude order of how different is the fuel consumption under different atmosphere condition. Is important to note that in the strategic phase planning the optimal trajectories are determined by meteorological predictions which differ from the moment of the flight. The optimal trajectories have shown savings of at least 500 [kg] in the majority of the atmosphere condition (different pressure, and temperature at Mean Sea Level, and different lapse rate temperature) with respect to the conventional procedure simulated at the same atmosphere condition.This results show that the implementation of optimal profiles are beneficial under the current Air traffic Management (ATM).

Pulse-Shape Analysis of PDM-QPSK Modulation Formats for 100 and 200 Gb/s DWDM transmissions

Advanced optical modulation format polarization-division multiplexed quadrature phase shift keying (PDM-QPSK) has become a key ingredient in the design of 100 and 200-Gb/s dense wavelength-division multiplexed (DWDM) networks. The performance of this format varies according to the shape of the pulses employed by the optical carrier: non-return to zero (NRZ), return to zero (RZ) or carrier-suppressed return to zero (CSRZ). In this paper we analyze the tolerance of PDM-QPSK to linear and nonlinear optical impairments: amplified spontaneous emission (ASE) noise, crosstalk, distortion by optical filtering, chromatic dispersion (CD), polarization mode dispersion (PMD) and fiber Kerr nonlinearities. RZ formats with a low duty cycle value reduce pulse-to-pulse interaction obtaining a higher tolerance to CD, PMD and intrachannel nonlinearities.

Analysis of the impact of globalization and economic growth on food security in developing countries

A pesar de los importantes avances en la reducción del hambre, la seguridad alimentaria continúa siendo un reto de dimensión internacional. La seguridad alimentaria es un concepto amplio y multidimensional, cuyo análisis abarca distintas escalas y horizontes temporales. Dada su complejidad, la identificación de las causas de la inseguridad alimentaria y la priorización de las medias para abordarlas, son dos cuestiones que suscitan un intenso debate en la actualidad. El objetivo de esta tesis es evaluar el impacto de la globalización y el crecimiento económico en la seguridad alimentaria en los países en desarrollo, desde una perspectiva macro y un horizonte temporal a largo plazo. La influencia de la globalización se aborda de una manera secuencial. En primer lugar, se analiza la relación entre la inversión público-privada en infraestructuras y las exportaciones agrarias. A continuación, se estudia el impacto de las exportaciones agrarias en los indicadores de seguridad alimentaria. El estudio del impacto del crecimiento económico aborda los cambios paralelos en la distribución de la renta, y cómo la inequidad influye en el comportamiento de la seguridad alimentaria nacional. Además, se analiza en qué medida el crecimiento económico contribuye a acelerar el proceso de mejora de la seguridad alimentaria. Con el fin de conseguir los objetivos mencionados, se llevan a cabo varios análisis econométricos basados en datos de panel, en el que se combinan datos de corte transversal de 52 países y datos temporales comprendidos en el periodo 1991-2012. Se analizan tanto variables en niveles como variables en tasas de cambio anual. Se aplican los modelos de estimación de efectos variables y efectos fijos, ambos en niveles y en primeras diferencias. La tesis incluye cuatro tipos de modelos econométricos, cada uno de ellos con sus correspondientes pruebas de robustez y especificaciones. Los resultados matizan la importancia de la globalización y el crecimiento económico como mecanismos de mejora de la seguridad alimentaria en los países en desarrollo. Se obtienen dos conclusiones relativas a la globalización. En primer lugar, los resultados sugieren que la promoción de las inversiones privadas en infraestructuras contribuye a aumentar las exportaciones agrarias. En segundo lugar, se observa que las exportaciones agrarias pueden tener un impacto negativo en los indicadores de seguridad alimentaria. La combinación de estas dos conclusiones sugiere que la apertura comercial y financiera no contribuye por sí misma a la mejora de la seguridad alimentaria en los países en desarrollo. La apertura internacional de los países en desarrollo ha de ir acompañada de políticas e inversiones que desarrollen sectores productivos de alto valor añadido, que fortalezcan la economía nacional y reduzcan su dependencia exterior. En relación al crecimiento económico, a pesar del incuestionable hecho de que el crecimiento económico es una condición necesaria para reducir los niveles de subnutrición, no es una condición suficiente. Se han identificado tres estrategias adicionales que han de acompañar al crecimiento económico con el fin de intensificar su impacto positivo sobre la subnutrición. Primero, es necesario que el crecimiento económico sea acompañado de una distribución más equitativa de los ingresos. Segundo, el crecimiento económico ha de reflejarse en un aumento de inversiones en salud, agua y saneamiento y educación. Se observa que, incluso en ausencia de crecimiento económico, mejoras en el acceso a agua potable contribuyen a reducir los niveles de población subnutrida. Tercero, el crecimiento económico sostenible en el largo plazo parece tener un mayor impacto positivo sobre la seguridad alimentaria que el crecimiento económico más volátil o inestable en el corto plazo. La estabilidad macroeconómica se identifica como una condición necesaria para alcanzar una mayor mejora en la seguridad alimentaria, incluso habiéndose mejorado la equidad en la distribución de los ingresos. Por último, la tesis encuentra que los países en desarrollo analizados han experimentado diferentes trayectorias no lineales en su proceso de mejora de sus niveles de subnutrición. Los resultados sugieren que un mayor nivel inicial de subnutrición y el crecimiento económico son responsables de una respuesta más rápida al reto de la mejora de la seguridad alimentaria. ABSTRACT Despite the significant reductions of hunger, food security still remains a global challenge. Food security is a wide concept that embraces multiple dimensions, and has spatial-temporal scales. Because of its complexity, the identification of the drivers underpinning food insecurity and the prioritization of measures to address them are a subject of intensive debate. This thesis attempts to assess the impact of globalization and economic growth on food security in developing countries with a macro level scale (country) and using a long-term approach. The influence of globalization is addressed in a sequential way. First, the impact of public-private investment in infrastructure on agricultural exports in developing countries is analyzed. Secondly, an assessment is conducted to determine the impact of agricultural exports on food security indicators. The impact of economic growth focuses on the parallel changes in income inequality and how the income distribution influences countries' food security performance. Furthermore, the thesis analyzes to what extent economic growth helps accelerating food security improvements. To address the above mentioned goals, various econometric models are formulated. Models use panel data procedures combining cross-sectional data of 52 countries and time series data from 1991 to 2012. Yearly data are expressed both in levels and in changes. The estimation models applied are random effects estimation and fixed effects estimations, both in levels and in first differences. The thesis includes four families of econometric models, each with its own set of robustness checks and specifications. The results qualify the relevance of globalization and economic growth as enabling mechanisms for improving food security in developing countries. Concerning globalization, two main conclusions can be drawn. First, results showed that enhancing foreign private investment in infrastructures contributes to increase agricultural exports. Second, agricultural exports appear to have a negative impact on national food security indicators. These two conclusions suggest that trade and financial openness per se do not contribute directly to improve food security in development countries. Both measures should be accompanied by investments and policies to support the development of national high value productive sectors, to strengthen the domestic economy and reduce its external dependency. Referring to economic growth, despite the unquestionable fact that income growth is a pre-requisite for reducing undernourishment, results suggest that it is a necessary but not a sufficient condition. Three additional strategies should accompany economic growth to intensifying its impact on food security. Firstly, it is necessary that income growth should be accompanied by a better distribution of income. Secondly, income growth needs to be followed by investments and policies in health, sanitation and education to improve food security. Even if economic growth falters, sustained improvements in the access to drinking water may still give rise to reductions in the percentage of undernourished people. And thirdly, long-term economic growth appears to have a greater impact on reducing hunger than growth regimes that combine periods of growth peaks followed by troughs. Macroeconomic stability is a necessary condition for accelerating food security. Finally, the thesis finds that the developing countries analyzed have experienced different non-linear paths toward improving food security. Results also show that a higher initial level of undernourishment and economic growth result in a faster response for improving food security.

Code assessment and modelling for Design Basis Accident analysis of the European Sodium Fast Reactor design. Part II: Optimised core and representative transients analysis

The new reactor concepts proposed in the Generation IV International Forum require the development and validation of computational tools able to assess their safety performance. In the first part of this paper the models of the ESFR design developed by several organisations in the framework of the CP-ESFR project were presented and their reliability validated via a benchmarking exercise. This second part of the paper includes the application of those tools for the analysis of design basis accident (DBC) scenarios of the reference design. Further, this paper also introduces the main features of the core optimisation process carried out within the project with the objective to enhance the core safety performance through the reduction of the positive coolant density reactivity effect. The influence of this optimised core design on the reactor safety performance during the previously analysed transients is also discussed. The conclusion provides an overview of the work performed by the partners involved in the project towards the development and enhancement of computational tools specifically tailored to the evaluation of the safety performance of the Generation IV innovative nuclear reactor designs.

A comparative analysis of configurations of linear Fresnel collectors for concentrating solar power

Linear Fresnel collector arrays present some relevant advantages in the domain of concentrating solar power because of their simplicity, robustness and low capital cost. However, they also present important drawbacks and limitations, notably their average concentration ratio, which seems to limit significantly the performance of these systems. First, the paper addresses the problem of characterizing the mirror field configuration assuming hourly data of a typical year, in reference to a configuration similar to that of Fresdemo. For a proper comparative study, it is necessary to define a comparison criterion. In that sense, a new variable is defined, the useful energy efficiency, which only accounts for the radiation that impinges on the receiver with intensities above a reference value. As a second step, a comparative study between central linear Fresnel reflectors and compact linear Fresnel reflectors is carried out. This analysis shows that compact linear Fresnel reflectors minimize blocking and shading losses compared to a central configuration. However this minimization is not enough to overcome other negative effects of the compact Fresnel collectors, as the greater dispersion of the rays reaching the receiver, caused by the fact that mirrors must be located farther from the receiver, which yields to lower efficiencies.