Progetto e realizzazione di un sistema UWB per comunicazioni audio e dati a breve raggio

In questo elaborato si vuole studiare l’implementazione di un sistema di comunicazione dati e audio basato su segnali Ultra Wide Band (UWB). L’obiettivo del progetto è quindi quello di implementare un sistema di comunicazione punto-multi punto basato su UWB.

Tecniche di misura della risposta impulsiva di ambienti indoor in ambito acustico

Questo elaborato si pone l’obiettivo principale di formulare una metodologia volta alla misura sperimentale della risposta impulsiva di ambienti indoor in ambito acustico. Lo studio della risposta impulsiva di una stanza trova diverse applicazioni nell’ambito dell’ingegneria acustica. Essa contiene infatti informazioni sulla geometria della stanza stessa, che può essere ricostruita con appositi algoritmi. È sovente impiegata anche in campo architettonico per progettare interventi di correzione o ottimizzazione acustica. In questo elaborato si darà spazio ad una terza applicazione: si utilizzerà la risposta impulsiva misurata in una determinata stanza per aggiungere effetti ambientali a suoni registrati in camere anecoiche. Per perseguire quest’obiettivo, nel capitolo 1 si richiamano i concetti di base riguardo i sistemi LTI, funzioni di trasferimento e risposta impulsiva, approfondendo gli aspetti legati alle tecniche tradizionalmente usate per la misura della risposta impulsiva in ambito acustico. Si pone poi la base teorica del metodo sperimentale che sarà sviluppato nel corso dell’elaborato, fondato sulla stima numerica dello spettro di segnali ad energia finita. Nel secondo capitolo s’illustra l’impostazione della catena di misura, chiarendo le scelte hardware intraprese, le motivazioni di tali scelte, il funzionamento generale dei dispositivi impiegati e le condizioni ottimali di misura. Il capitolo 3 rappresenta il cuore di questo elaborato, nel quale viene illustrata l’implementazione vera e propria della metodologia della misura della risposta impulsiva, a partire dal settaggio degli strumenti utilizzati, alla realizzazione del codice MATLAB per l’elaborazione dei dati, per giungere infine all’analisi dei risultati sperimentali ottenuti. Con il quarto ed ultimo capitolo si introduce il concetto di equalizzazione e si implementa una prima e grossolana soluzione al problema degli effetti distorcenti introdotti dai dispositivi non ideali.

Misura UHF (Ultra High Frequency) delle scariche parziali nei sistemi isolati a gas: metodologie per la verifica della sensibilità di misura

Le apparecchiature di manovra tramite isolamento a gas (GIS) sono in funzione da più di 45 anni e hanno dimostrato un alto livello di affidabilità, con tassi di difetto molto bassi. Tuttavia, il riscontro pratico indica che alcuni dei guasti che si verificano durante il servizio sono legati a difetti del sistema di isolamento. Molti di questi difetti possono essere rilevati tramite diagnostica con scariche parziali (PD). Per la rilevazione PD, viene utilizzato il metodo UHF perché meno sensibile ai disturbi e quindi più facile da gestire in confronto al metodo convenzionale secondo IEC 60270. Un rapporto di Electra pubblicato nel 1999 dal CIGRE Task Force 15/33.03.05 descrive la procedura in due fasi per la verifica della sensibilità del sistema UHF in modo molto generale. Dopo 15 anni dalla sua applicazione, è diventata necessaria una descrizione più dettagliata, sia su misure necessarie al test di laboratorio (Passaggio 1) che sul test in loco (Passaggio 2).

Esineiden internetin verkkostandardit älykodissa

Tutkielman tavoitteena on esitellä esineiden internetin kokonaisuutta ja tutkia siellä käytettäviä langattomia verkkostandardeja sekä niiden käyttöä älykodissa. Esineiden internetin soveltamisalueet jakautuvat älykodin, teollisuuden ja yhteiskunnan osa-alueisiin. Näistä älykotia käsitellään tutkielmassa tarkemmin. Työssä selvitetään, mitkä ovat esineiden internetin yleisimmät langattomat verkkostandardit ja niiden ominaisuudet. Lisäksi selvitetään, mistä osista älykoti koostuu, mitkä ovat soveltamisalueet ja miten älykoti toimii. Vertailukohteina käytetään kahden suuren elektroniikkavalmistajan, Samsungin ja LG:n, älykotiratkaisuja. Tutkielmassa esitellään esineiden internetin määritelmä, sen historiaa ja käyttökohteita, jotta saadaan yleiskuva esineiden internetin kokonaisuudesta. Tämän jälkeen syvennytään langattomiin verkkostandardeihin, jotka ovat keskeisesti käytössä esineiden internetissä. Kyseiset verkkostandardit ovat Bluetooth, Bluetooth Low Energy, NFC, Wi-Fi, Zigbee ja 6LoWPAN. Lopuksi käsitellään älykotia ja sen ominaisuuksia. Samalla tutkitaan Samsungin ja LG:n älykotilaitteita ja pohditaan niiden toimivuutta. Lisäksi pohditaan verkkostandardien käyttöä älykodeissa sekä esineiden internetin ja älylaitteiden vaikutuksia ihmisiin. Lopputuloksena todetaan, että Wi-Fi, Bluetooth ja Zigbee ovat yleisimmät älykodin verkkostandardit ja että ainoastaan yksi verkkostandardi ei tällä hetkellä riitä monipuolisen älykodin kaikkia toimintoja varten. Vertailussa huomataan Samsungin älykotiratkaisun olevan kehityksessä LG:tä edellä.

A Mobile High Sensitivity On-field Organophosphorous Compounds Detecting System for IoT Based Food Safety Tracking

Food safety has always been a social issue that draws great public attention. With the rapid development of wireless communication technologies and intelligent devices, more and more Internet of Things (IoT) systems are applied in the food safety tracking field. However, connection between things and information system is usually established by pre-storing information of things into RFID Tag, which is inapplicable for on-field food safety detection. Therefore, considering pesticide residue is one of the severe threaten to food safety, a new portable, high-sensitivity, low-power, on-field organophosphorus (OP) compounds detection system is proposed in this thesis to realize the on-field food safety detection. The system is designed based on optical detection method by using a customized photo-detection sensor. A Micro Controller Unit (MCU) and a Bluetooth Low Energy (BLE) module are used to quantize and transmit detection result. An Android Application (APP) is also developed for the system to processing and display detection result as well as control the detection process. Besides, a quartzose sample container and black system box are also designed and made for the system demonstration. Several optimizations are made in wireless communication, circuit layout, Android APP and industrial design to realize the mobility, low power and intelligence.

Indoor environment and the impact on the health of pre-exisiting asthmatics at work: the development of a risk management framework

This thesis examines the spatial and temporal variation in nitrogen dioxide (NO2) levels in Guernsey and the impacts on pre-existing asthmatics. Whilst air quality in Guernsey is generally good, the levels of NO2 exceed UK standards in several locations. The evidence indicates that people suffering from asthma have exacerbation of their symptoms if exposed to elevated levels of air pollutants including NO2, although this research has never been carried out in Guernsey before. In addition, exposure assessment of individuals is rarely carried out and research in this area is limited due to the complexity of undertaking such a study, which will include a combination of exposures in the home, the workplace and ambient exposures, which vary depending on the individual daily experience. For the first time in Guernsey, this research has examined NO2 levels in correlation with asthma patient admissions to hospital, assessment of NO2 exposures in typical homes and typical workplaces in Guernsey. The data showed a temporal correlation between NO2 levels and the number of hospital admissions and the trend from 2008-2012 was upwards. Statistical analysis of the data did not show a significant linear correlation due to the small size of the data sets. Exposure assessment of individuals showed a spatial variation in exposures in Guernsey and assessment in indoor environments showed that real-time analysis of NO2 levels needs to be undertaken if indoor micro environments for NO2 are the be assessed adequately. There was temporal and spatial variation in NO2 concentrations measured using diffusion tubes, which provide a monthly mean value, and analysers measuring NO2 concentrations in real time. The research shows that building layout and design are important factors for good air flow and ventilation and the dispersion of NO2 indoors. Environmental Health Officers have statutory responsibilities for ambient air quality, hygiene of buildings and workplace environments and this role needs to be co-ordinated with healthcare professionals to improve health outcomes for asthmatics. The outcome of the thesis was the development of a risk management framework for pre-existing asthmatics at work for use by regulators of workplaces and an information leaflet to assist in improving health outcomes for asthmatics in Guernsey.

Microbiological assessment of indoor air quality at different hospital sites

Poor hospital indoor air quality (IAQ) may lead to hospital-acquired infections, sick hospital syndrome and various occupational hazards. Air-control measures are crucial for reducing dissemination of airborne biological particles in hospitals. The objective of this study was to perform a survey of bioaerosol quality in different sites in a Portuguese Hospital, namely the operating theater (OT), the emergency service (ES) and the surgical ward (SW). Aerobic mesophilic bacterial counts (BCs) and fungal load (FL) were assessed by impaction directly onto tryptic soy agar and malt extract agar supplemented with antibiotic chloramphenicol (0.05%) plates, respectively using a MAS-100 air sampler. The ES revealed the highest airborne microbial concentrations (BC range 240-736 CFU/m(3) CFU/m(3); FL range 27-933 CFU/m(3)), exceeding, at several sampling sites, conformity criteria defined in national legislation [6]. Bacterial concentrations in the SW (BC range 99-495 CFU/m(3)) and the OT (BC range 12-170 CFU/m(3)) were under recommended criteria. While fungal levels were below 1 CFU/m(3) in the OT, in the SW (range 1-32 CFU/m(3)), there existed a site with fungal indoor concentrations higher than those detected outdoors. Airborne Gram-positive cocci were the most frequent phenotype (88%) detected from the measured bacterial population in all indoor environments. Staphylococcus (51%) and Micrococcus (37%) were dominant among the bacterial genera identified in the present study. Concerning indoor fungal characterization, the prevalent genera were Penicillium (41%) and Aspergillus (24%). Regular monitoring is essential for assessing air control efficiency and for detecting irregular introduction of airborne particles via clothing of visitors and medical staff or carriage by personal and medical materials. Furthermore, microbiological survey data should be used to clearly define specific air quality guidelines for controlled environments in hospital settings.

Viivakoodien ja RFID-tunnisteiden vertailu Fetek Oy:n käyttöön

Työn tavoitteena oli vähentää levyaihioiden hakuun käytettävää aikaa varastossa. Tutkimus perustuu kirjallisuuteen ja tieteellisiin lähteisiin. Fetek Oy:n levyvarastoon soveltuvaksi tunnistusjärjestelmäksi osoittautui viivakooditekniikkaan perustuva QR-koodi. QR-koodien valmistus onnistuu yrityksessä ja koodiin saadaan mahtumaan kaikki tarvittava tieto levyistä. Koodien lukeminen onnistuu työpuhelimella tai erillisellä lukijalla. Koodien käyttöönotto ja päivittäminen oli kustannustehokkain ratkaisu yrityksen tarpeisiin. Olemassa olevaa varastoa myös päätettiin selkeyttää käyttämällä väritunnistusta hyllyissä ja ottamalla käyttöön LEAN 5S. Värikoodaus nopeuttaa tunnistusta huomattavasti ja LEAN 5S puolestaan auttaa pitämään tuotantotilat aina järjestyksessä. Jatkotutkimuksessa tulisi parantaa tuotantotilojen järjestelyä ja miettiä yrityksen käytössä olevan varastonhallintaohjelmiston soveltuvuutta.

PHC Production Management System Based on RFID

At present, in large precast concrete enterprises, the management over precast concrete component has been chaotic. Most enterprises take labor-intensive manual input method, which is time consuming and laborious, and error-prone. Some other slightly better enterprises choose to manage through bar-code or printing serial number manually. However, on one hand, this is also labor-intensive, on the other hand, this method is limited by external environment, making the serial number blur or even lost, and also causes a big problem on production traceability and quality accountability. Therefore, to realize the enterprise’s own rapid development and cater to the needs of the time, to achieve the automated production management has been a big problem for a modern enterprise. In order to solve the problem, inefficiency in production and traceability of the products, this thesis try to introduce RFID technology into the production of PHC tubular pile. By designing a production management system of precast concrete components, the enterprise will achieve the control of the entire production process, and realize the informatization of enterprise production management. RFID technology has been widely used in many fields like entrance control, charge management, logistics and so on. RFID technology will adopt passive RFID tag, which is waterproof, shockproof, anti-interference, so it’s suitable for the actual working environment. The tag will be bound to the precast component steel cage (the structure of the PHC tubular pile before the concrete placement), which means each PHC tubular pile will have a unique ID number. Then according to the production procedure, the precast component will be performed with a series of actions, put the steel cage into the mold, mold clamping, pouring concrete (feed), stretching, centrifugalizing, maintenance, mold removing, welding splice. In every session of the procedure, the information of the precast components can be read through a RFID reader. Using a portable smart device connected to the database, the user can check, inquire and management the production information conveniently. Also, the system can trace the production parameter and the person in charge, realize the traceability of the information. This system can overcome the disadvantages in precast components manufacturers, like inefficiency, error-prone, time consuming, labor intensity, low information relevance and so on. This system can help to improve the production management efficiency, and can produce a good economic and social benefits, so, this system has a certain practical value.

Carrier frequency effect on the MIMO eigenvalues in an indoor environment

El efecto de la frecuencia portadora sobre los valores propios de los sistemas MIMO (multiple-input multiple-output) es investigado experimentalmente en un entorno indoor, considerando condiciones de línea de vista (LOS: line-of-sight) y sin línea de vista (NLOS: non-line-of-sight). Los resultados muestran una reducción en la potencia media de los valores propios del sistema MIMO, lo cual es debido a un incremento en la correlación espacial entre los sub-canales cuando la frecuencia portadora se incrementa. Este efecto causa una reducción en la capacidad del sistema MIMO.

Comparison of indoor and outdoor fungi and particles in poultry units

A descriptive study was developed in order to compare indoor and outdoor air contamination caused by fungi and particles in seven poultry units. Twenty eight air samples of 25 litters were collected through the impaction method on malt extract agar. Air sampling and particles concentration measurement were done in the interior and also outside premises of the poultries’ pavilions. Regarding the fungal load in the air, indoor concentration of mold was higher than outside air in six poultry units. Twenty eight species / genera of fungi were identified indoor, being Scopulariopsis brevicaulis (40.5%) the most commonly isolated species and Rhizopus sp. (30.0%) the most commonly isolated genus. Concerning outdoor, eighteen species/genera of fungi were isolated, being Scopulariopsis brevicaulis (62.6%) also the most isolated. All the poultry farms analyzed presented indoor fungi different from the ones identified outdoors. Regarding particles’ contamination, PM2.5, PM5.0 and PM10 had a statistically significant difference (Mann-Whitney U test) between the inside and outside of the pavilions, with the inside more contaminated (p=.006; p=.005; p=.005, respectively). The analyzed poultry units are potential reservoirs of substantial amounts of fungi and particles and could therefore free them in the atmospheric air. The developed study showed that indoor air was more contaminated than outdoors, and this can result in emission of potentially pathogenic fungi and particles via aerosols from poultry units to the environment, which may post a considerable risk to public health and contribute to environmental pollution.