ENABLING HARDWARE TECHNOLOGIES FOR AUTONOMY IN TINY ROBOTS: CONTROL, INTEGRATION, ACTUATION

The last two decades have seen many exciting examples of tiny robots from a few cm3 to less than one cm3. Although individually limited, a large group of these robots has the potential to work cooperatively and accomplish complex tasks. Two examples from nature that exhibit this type of cooperation are ant and bee colonies. They have the potential to assist in applications like search and rescue, military scouting, infrastructure and equipment monitoring, nano-manufacture, and possibly medicine. Most of these applications require the high level of autonomy that has been demonstrated by large robotic platforms, such as the iRobot and Honda ASIMO. However, when robot size shrinks down, current approaches to achieve the necessary functions are no longer valid. This work focused on challenges associated with the electronics and fabrication. We addressed three major technical hurdles inherent to current approaches: 1) difficulty of compact integration; 2) need for real-time and power-efficient computations; 3) unavailability of commercial tiny actuators and motion mechanisms. The aim of this work was to provide enabling hardware technologies to achieve autonomy in tiny robots. We proposed a decentralized application-specific integrated circuit (ASIC) where each component is responsible for its own operation and autonomy to the greatest extent possible. The ASIC consists of electronics modules for the fundamental functions required to fulfill the desired autonomy: actuation, control, power supply, and sensing. The actuators and mechanisms could potentially be post-fabricated on the ASIC directly. This design makes for a modular architecture. The following components were shown to work in physical implementations or simulations: 1) a tunable motion controller for ultralow frequency actuation; 2) a nonvolatile memory and programming circuit to achieve automatic and one-time programming; 3) a high-voltage circuit with the highest reported breakdown voltage in standard 0.5 μm CMOS; 4) thermal actuators fabricated using CMOS compatible process; 5) a low-power mixed-signal computational architecture for robotic dynamics simulator; 6) a frequency-boost technique to achieve low jitter in ring oscillators. These contributions will be generally enabling for other systems with strict size and power constraints such as wireless sensor nodes.

Comparación de analgesia y efectos secundarios entre morfina y morfina más diclofenac sódico, como alternativa para control del dolor posoperatorio agudo en pacientes que han sido sometidos a cirugía (protatectomía, histerectomía) bajo anestesia conductiva, Cuenca 2004

Con el objetivo de comparar la analgesia y efectos secundarios entre morfina y morfina + diclofenac sódico, como alternativa para el control del dolor portoperatorio agudo en pacientes sometidos a prostatectomía e histerectomía, bajo anestesia raquídea, administramos estos dos esquemas analgésicos a 100 pacientes en el hospital José Carrasco y en la Clínica Santa Ana. No hubieron diferencias estadísticamente significativas entre las variables, edad, sexo, ocupación, intervención, tiempo quirúrgico y hemodinamia. Los requerimientos analgésicos en las primeras ocho horas de postoperatorio, medidos con el uso de una Escala Análoga Visual, fueron más morfina (p=0.0007). La incidencia de náusea fue mayor para el grupo que recibió morfina únicamente (p=0.026) y aunque la incidencia de vomito también fue mayor para el mismo grupo la diferencia no fue significativa (p=0.277). La asociación morfina + diclofenaro sódigo debe ser considerada de utilidad para el tratamiento del dolor postoperatorio agudo najo la consideración de que disminuye los requerimientos analgésicos y la incidencia de náusea y v omito, proporcionando a la vez un mejor control del dolor

Quantitative evaluation of visual function 12 months after bilateral implantation of a diffractive trifocal IOL

PURPOSE: To quantitatively evaluate visual function 12 months after bilateral implantation of the Physiol FineVision® trifocal intraocular lens (IOL) and to compare these results with those obtained in the first postoperative month. METHODS: In this prospective case series, 20 eyes of 10 consecutive patients were included. Monocular and binocular, uncorrected and corrected visual acuities (distance, near, and intermediate) were measured. Metrovision® was used to test contrast sensitivity under static and dynamic conditions, both in photopic and low-mesopic settings. The same software was used for pupillometry and glare evaluation. Motion, achromatic, and chromatic contrast discrimination were tested using 2 innovative psychophysical tests. A complete ophthalmologic examination was performed preoperatively and at 1, 3, 6, and 12 months postoperatively. Psychophysical tests were performed 1 month after surgery and repeated 12 months postoperatively. RESULTS: Final distance uncorrected visual acuity (VA) was 0.00 ± 0.08 and distance corrected VA was 0.00 ± 0.05 logMAR. Distance corrected near VA was 0.00 ± 0.09 and distance corrected intermediate VA was 0.00 ± 0.06 logMAR. Glare testing, pupillometry, contrast sensitivity, motion, and chromatic and achromatic contrast discrimination did not differ significantly between the first and last visit (p>0.05) or when compared to an age-matched control group (p>0.05). CONCLUSIONS: The Physiol FineVision® trifocal IOL provided satisfactory full range of vision and quality of vision parameters 12 months after surgery. Visual acuity and psychophysical tests did not vary significantly between the first and last visit.

Integración de Arbotix, Raspberry Pi y motores Dynamixel Ax-12+ para un robot humanoide que busca y patea pelotas

En este artículo se presenta a DeBuPa (Detección Búsqueda Pateo) un humanoide de tamaño pequeño (38 cm de alto) construido con las piezas del kit Bioloid. Del kit se ha excluido la tarjeta CM-510 para sustituirla por la tarjeta controladora Arbotix, que será la que controle los 16 motores Dynamixel Ax-12+ (para mover al robot) y 2 servomotores analógicos (para mover la cámara). Además se ha agregado un mini computador Raspberry Pi, con su cámara, para que el robot pueda detectar y seguir la pelota de forma autónoma. Todos estos componentes deben ser coordinados para que se logre cumplir la tarea de detectar, seguir y patear la pelota. Por ello se hace necesaria la comunicación entre la Arbotix y la Raspberry Pi. La herramienta empleada para ello es el framework ROS (Robot Operating System). En la Raspberry Pi se usa el lenguaje C++ y se ejecuta un solo programa encargado de captar la imagen de la cámara, filtrar y procesar para encontrar la pelota, tomar la decisión de la acción a ejecutar y hacer la petición a la Arbotix para que dé la orden a los motores de ejecutar el movimiento. Para captar la imagen de la cámara se ha utilizado la librería RasPiCam CV. Para filtrar y procesar la imagen se ha usado las librerías de OpenCV. La Arbotix, además de controlar los motores, se encarga de monitorizar que el robot se encuentre balanceado, para ello usa el sensor Gyro de Robotis. Si detecta un desbalance de un cierto tamaño puede saber si se ha caído y levantarse.

Integrated visual perception architecture for robotic clothes perception and manipulation

This thesis proposes a generic visual perception architecture for robotic clothes perception and manipulation. This proposed architecture is fully integrated with a stereo vision system and a dual-arm robot and is able to perform a number of autonomous laundering tasks. Clothes perception and manipulation is a novel research topic in robotics and has experienced rapid development in recent years. Compared to the task of perceiving and manipulating rigid objects, clothes perception and manipulation poses a greater challenge. This can be attributed to two reasons: firstly, deformable clothing requires precise (high-acuity) visual perception and dexterous manipulation; secondly, as clothing approximates a non-rigid 2-manifold in 3-space, that can adopt a quasi-infinite configuration space, the potential variability in the appearance of clothing items makes them difficult to understand, identify uniquely, and interact with by machine. From an applications perspective, and as part of EU CloPeMa project, the integrated visual perception architecture refines a pre-existing clothing manipulation pipeline by completing pre-wash clothes (category) sorting (using single-shot or interactive perception for garment categorisation and manipulation) and post-wash dual-arm flattening. To the best of the author’s knowledge, as investigated in this thesis, the autonomous clothing perception and manipulation solutions presented here were first proposed and reported by the author. All of the reported robot demonstrations in this work follow a perception-manipulation method- ology where visual and tactile feedback (in the form of surface wrinkledness captured by the high accuracy depth sensor i.e. CloPeMa stereo head or the predictive confidence modelled by Gaussian Processing) serve as the halting criteria in the flattening and sorting tasks, respectively. From scientific perspective, the proposed visual perception architecture addresses the above challenges by parsing and grouping 3D clothing configurations hierarchically from low-level curvatures, through mid-level surface shape representations (providing topological descriptions and 3D texture representations), to high-level semantic structures and statistical descriptions. A range of visual features such as Shape Index, Surface Topologies Analysis and Local Binary Patterns have been adapted within this work to parse clothing surfaces and textures and several novel features have been devised, including B-Spline Patches with Locality-Constrained Linear coding, and Topology Spatial Distance to describe and quantify generic landmarks (wrinkles and folds). The essence of this proposed architecture comprises 3D generic surface parsing and interpretation, which is critical to underpinning a number of laundering tasks and has the potential to be extended to other rigid and non-rigid object perception and manipulation tasks. The experimental results presented in this thesis demonstrate that: firstly, the proposed grasp- ing approach achieves on-average 84.7% accuracy; secondly, the proposed flattening approach is able to flatten towels, t-shirts and pants (shorts) within 9 iterations on-average; thirdly, the proposed clothes recognition pipeline can recognise clothes categories from highly wrinkled configurations and advances the state-of-the-art by 36% in terms of classification accuracy, achieving an 83.2% true-positive classification rate when discriminating between five categories of clothes; finally the Gaussian Process based interactive perception approach exhibits a substantial improvement over single-shot perception. Accordingly, this thesis has advanced the state-of-the-art of robot clothes perception and manipulation.

Robust Stereo Visual Odometry through a Probabilistic Combination of Points and Line Segments

Most approaches to stereo visual odometry reconstruct the motion based on the tracking of point features along a sequence of images. However, in low-textured scenes it is often difficult to encounter a large set of point features, or it may happen that they are not well distributed over the image, so that the behavior of these algorithms deteriorates. This paper proposes a probabilistic approach to stereo visual odometry based on the combination of both point and line segment that works robustly in a wide variety of scenarios. The camera motion is recovered through non-linear minimization of the projection errors of both point and line segment features. In order to effectively combine both types of features, their associated errors are weighted according to their covariance matrices, computed from the propagation of Gaussian distribution errors in the sensor measurements. The method, of course, is computationally more expensive that using only one type of feature, but still can run in real-time on a standard computer and provides interesting advantages, including a straightforward integration into any probabilistic framework commonly employed in mobile robotics.

Desarrollo de arquitecturas para procesamiento de control de la mirada en sistemas de visión activa con resolución espacial variable

En esta tesis se aborda la implementación de un sistema completo de visión activa, en el que se capturan y generan imágenes de resolución espacial variable. Todo el sistema se integra en un sólo dispositivo del tipo AP SoC (All Programmable System on Chip), lo que nos permite llevar a cabo el codiseño hardware-software del mismo, implementando en la parte lógica los bloques de preprocesado intensivo, y en la parte software los algoritmos de procesado de control más complejo. El objetivo es que, trabajando con un campo visual del orden de Megapíxeles, se pueda procesar una tasa moderada de imágenes por segundo. Las imágenes multiresolución se generan a partir de sensores de resolución uniforme con una latencia nula, lo que permite tener preparada la imagen de resolución variable en el mismo instante en que se ha terminado de capturar la imagen original. Como innovación con respecto a las primeras contribuciones relacionadas con esta Tesis, se procesan imágenes con toda la información de color. Esto implica la necesidad de diseñar conversores entre espacios de color distintos, para adecuar la información al tipo de procesado que se va a realizar con ella. Estos bloques se integran sin alterar la latencia de entrega de los sucesivos fotogramas. El procesamiento de estas imágenes multirresolución genera un mapa de saliencia que permite mover la fóvea hacía la región considerada como más relevante en la escena. El contenido de la imagen se estructura en una jerarquía de niveles de abstracción. A diferencia de otras arquitecturas de este tipo, como son la pirámide regular y el polígono foveal, en las que se trabaja con imágenes de resolución uniforme en los distintos niveles de la jerarquía, la pirámide irregular foveal que se propone en esta tesis combina las ideas de trabajar con una imagen realmente multirresolución, que incluya el campo de visión completo que abarcan sensor y óptica, con el procesamiento jerárquico propio de las pirámides irregulares. Para ello en esta tesis se propone la implementación de un algoritmo de diezmado irregular que, tomando como base la imagen multirresolución, dará como resultado una estructura piramidal donde los distintos niveles no son imágenes sino grafos orientados a la resolución del problema de segmentación y estimación de saliencia. Todo el sistema se integra en torno a la arquitectura de bus AXI, que permite conectar entre si todos los cores desarrollados en la parte lógica, así como el acceso a la memoria compartida con los algoritmos implementados en la parte software. Esto es posible gracias a los bloques de acceso directo a memoria AXI-VDMA, en una propuesta de configuración que permite tanto la integración perfectamente coordinada de la transferencia de la imagen multirresolución generada a la zona de trabajo del algoritmo de segmentación como su recuperación para la posterior visualización del resultado del proceso, y todo ello con una tasa de trabajo que mejora los resultados de plataformas similares.

Mimicking the behaviour of idiotypic AIS robot controllers using probabilistic systems

Previous work has shown that robot navigation systems that employ an architecture based upon the idiotypic network theory of the immune system have an advantage over control techniques that rely on reinforcement learning only. This is thought to be a result of intelligent behaviour selection on the part of the idiotypic robot. In this paper an attempt is made to imitate idiotypic dynamics by creating controllers that use reinforcement with a number of different probabilistic schemes to select robot behaviour. The aims are to show that the idiotypic system is not merely performing some kind of periodic random behaviour selection, and to try to gain further insight into the processes that govern the idiotypic mechanism. Trials are carried out using simulated Pioneer robots that undertake navigation exercises. Results show that a scheme that boosts the probability of selecting highly-ranked alternative behaviours to 50% during stall conditions comes closest to achieving the properties of the idiotypic system, but remains unable to match it in terms of all round performance.

Impaired Mesopic Visual Acuity in Eyes with Early Age-Related Macular Degeneration

Purpose.: To determine photopic and mesopic distance high-contrast visual acuity (HC-VA) and low-contrast visual acuity (LC-VA) in eyes with early age-related macular degeneration (AMD). Methods.: Measurements were made in 22 subjects with early AMD and 28 healthy control subjects. Inclusion criteria included a photopic HC-VA of 20/25 or better. Distance VA was measured using HC (96%) and LC (10%) Bailey-Lovie logMAR letter charts under photopic (85 cd/m2) and mesopic (0.1–0.2 cd/m2) luminance conditions. Results.: Mean mesopic distance HC-VA and LC-VA were significantly worse (0.1 logMAR and 0.28 logMAR, respectively) in the early AMD group than in the control group. Under mesopic conditions, the mean difference between LC-VA and HC-VA was significantly greater in the early AMD (0.45 logMAR) than the control group (0.27 logMAR). Mean differences between mesopic versus photopic HC-VA and mesopic versus photopic LC-VA were significantly greater in the early AMD than the control group (0.13 and 0.32 logMAR of difference between the means, respectively). Sensitivity and specificity were significantly greater for mesopic LC-VA than for mesopic HC-VA (Receiver Operating Characteristics, area under the curve [AUC], 0.94 ± 0.030 and 0.76 ± 0.067, respectively). AUC values for photopic HC-VA and LC-VA were below 0.70. Conclusions.: Visual acuity testing under low luminance conditions emerged as an optimal quantitative measure of retinal function in early AMD.

Control para sistemas LPV basado en la parametrización de controladores estabilizantes

Este trabajo se enfoca en el estudio del control de sistemas Multi-Entrada Multi-Salida (MIMO) Lineales con Parámetros Variantes en el Tiempo (LPV). Los parámetros son medibles y permanecen dentro de cotas conocidas. El control por retroalimentación de salida garantiza estabilidad cuadrática (QS) y desempeño, mediante el Teorema de los vértices y el Lema de Cota Real (BRL). Se proponen condiciones para que el sistema retroalimentado sea convexo cuando se utilizan controladores estabilizantes en cada vértice. El controlador LPV resulta de la interpolación de estos controladores, y se estudia la relación entre la estabilidad y el desempeño del control de los vértices, y la estabilidad y desempeño del sistema LPV. Además, se da una forma explícita del parámetro libre de la Parametrización de Todos los Controladores Estabilizantes (PTCE) que resuelve un criterio de sensibilidad mezclada cuando se tiene un modelo de incertidumbre aditivo a la salida. Los resultados se aplican a un robot planar rotacional de dos grados de libertad, a un motor de CD y a un sistema de dos masas.

CLARK - Smart Clinic Assistant Robot for CGA

En esta presentación se exponen la arquitectura general y el estado actual de desarrollo del sistema CLARK. Dicho sistema tiene como objetivo el despliegue de un asistente robótico para ayudar a un médico en la realización de procedimientos CGA (Comprehensive Geriatric Assessment), de forma que ciertas tareas, tales como la realización de cuestionarios o pruebas de movimiento, puedan ser realizadas por el robot de forma paralela al resto del procedimiento CGA, aumentando así su eficiencia.

Whole-body cortisol increases after direct and visual contact with a predator in zebrafish, Danio rerio

Ornamental fish may be severely affected by a stressful environment. Stressors impair the immune response, reproduction and growth rate; thus, the identification of possible stressors will aid to improve the overall quality of ornamental fish. The aim of this study was to determine whole-body cortisol of adult zebrafish, Danio rerio, following visual or direct contact with a predator species. Zebrafish were distributed in three groups: the first group, which consisted of zebrafish reared completely isolated of the predator, was considered the negative control; the second group, in which the predator, Parachromis managuensis was stocked together with zebrafish, was considered the positive control; the third group consisted of zebrafish stocked in a glass aquarium, with direct visual contact with the predator. The mean whole-body cortisol concentration in zebrafish from the negative control was 6.78 +/- 1.12 ng g(-1), a concentration statistically lower than that found in zebrafish having visual contact with the predator (9.26 +/- 0.88 ng g(-1)) which, in turn, was statistically lower than the mean whole-body cortisol of the positive control group (12.35 +/- 1.59 ng g(-1)). The higher whole-body cortisol concentration found in fish from the positive control can be attributed to the detection, by the zebrafish, of relevant risk situations that may involve a combination of chemical, olfactory and visual cues. One of the functions of elevated cortisol is to mobilize energy from body resources to cope with stress. The elevation of whole-body cortisol in fish subjected to visual contact with the predator involves only the visual cue in the recognition of predation risk. We hypothesized that the zebrafish could recognize predator characteristics in P managuensis, such as length, shape, color and behavior. Nonetheless, the elevation of whole-body cortisol in zebrafish suggested that the visual contact of the predator may elicit a stress response in prey fish. This assertion has a strong practical application concerning the species distribution in ornamental fish markets in which prey species should not be allowed to see predator species. Minimizing visual contact between prey and predator fish may improve the quality, viability and welfare of small fish in ornamental fish markets. (c) 2007 Elsevier B.V. All rights reserved.

Sistema de visión por computador para control de calidad en Huevos

69 p.

Cognitive and Visual Speech Contributions to Speech Perception in Challenging Listening Conditions

Speech perception routinely takes place in noisy or degraded listening environments, leading to ambiguity in the identity of the speech token. Here, I present one review paper and two experimental papers that highlight cognitive and visual speech contributions to the listening process, particularly in challenging listening environments. First, I survey the literature linking audiometric age-related hearing loss and cognitive decline and review the four proposed causal mechanisms underlying this link. I argue that future research in this area requires greater consideration of the functional overlap between hearing and cognition. I also present an alternative framework for understanding causal relationships between age-related declines in hearing and cognition, with emphasis on the interconnected nature of hearing and cognition and likely contributions from multiple causal mechanisms. I also provide a number of testable hypotheses to examine how impairments in one domain may affect the other. In my first experimental study, I examine the direct contribution of working memory (through a cognitive training manipulation) on speech in noise comprehension in older adults. My results challenge the efficacy of cognitive training more generally, and also provide support for the contribution of sentence context in reducing working memory load. My findings also challenge the ubiquitous use of the Reading Span test as a pure test of working memory. In a second experimental (fMRI) study, I examine the role of attention in audiovisual speech integration, particularly when the acoustic signal is degraded. I demonstrate that attentional processes support audiovisual speech integration in the middle and superior temporal gyri, as well as the fusiform gyrus. My results also suggest that the superior temporal sulcus is sensitive to intelligibility enhancement, regardless of how this benefit is obtained (i.e., whether it is obtained through visual speech information or speech clarity). In addition, I also demonstrate that both the cingulo-opercular network and motor speech areas are recruited in difficult listening conditions. Taken together, these findings augment our understanding of cognitive contributions to the listening process and demonstrate that memory, working memory, and executive control networks may flexibly be recruited in order to meet listening demands in challenging environments.

Avaliação do equilíbrio em indivíduos com défice visual e normovisuais

Projeto de Graduação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Licenciado em Fisioterapia