Optical designs for improved solar cell performance

The solar resource is the most abundant renewable resource on earth, yet it is currently exploited with relatively low efficiencies. To make solar energy more affordable, we can either reduce the cost of the cell or increase the efficiency with a similar cost cell. In this thesis, we consider several different optical approaches to achieve these goals. First, we consider a ray optical model for light trapping in silicon microwires. With this approach, much less material can be used, allowing for a cost savings. We next focus on reducing the escape of radiatively emitted and scattered light from the solar cell. With this angle restriction approach, light can only enter and escape the cell near normal incidence, allowing for thinner cells and higher efficiencies. In Auger-limited GaAs, we find that efficiencies greater than 38% may be achievable, a significant improvement over the current world record. To experimentally validate these results, we use a Bragg stack to restrict the angles of emitted light. Our measurements show an increase in voltage and a decrease in dark current, as less radiatively emitted light escapes. While the results in GaAs are interesting as a proof of concept, GaAs solar cells are not currently made on the production scale for terrestrial photovoltaic applications. We therefore explore the application of angle restriction to silicon solar cells. While our calculations show that Auger-limited cells give efficiency increases of up to 3% absolute, we also find that current amorphous silicion-crystalline silicon heterojunction with intrinsic thin layer (HIT) cells give significant efficiency gains with angle restriction of up to 1% absolute. Thus, angle restriction has the potential for unprecedented one sun efficiencies in GaAs, but also may be applicable to current silicon solar cell technology. Finally, we consider spectrum splitting, where optics direct light in different wavelength bands to solar cells with band gaps tuned to those wavelengths. This approach has the potential for very high efficiencies, and excellent annual power production. Using a light-trapping filtered concentrator approach, we design filter elements and find an optimal design. Thus, this thesis explores silicon microwires, angle restriction, and spectral splitting as different optical approaches for improving the cost and efficiency of solar cells.

Imperfection Insensitive Thin Shells

The buckling of axially compressed cylindrical shells and externally pressurized spherical shells is extremely sensitive to even very small geometric imperfections. In practice this issue is addressed by either using overly conservative knockdown factors, while keeping perfect axial or spherical symmetry, or adding closely and equally spaced stiffeners on shell surface. The influence of imperfection-sensitivity is mitigated, but the shells designed from these approaches are either too heavy or very expensive and are still sensitive to imperfections. Despite their drawbacks, these approaches have been used for more than half a century.

This thesis proposes a novel method to design imperfection-insensitive cylindrical shells subject to axial compression. Instead of following the classical paths, focused on axially symmetric or high-order rotationally symmetric cross-sections, the method in this thesis adopts optimal symmetry-breaking wavy cross-sections (wavy shells). The avoidance of imperfection sensitivity is achieved by searching with an evolutionary algorithm for smooth cross-sectional shapes that maximize the minimum among the buckling loads of geometrically perfect and imperfect wavy shells. It is found that the shells designed through this approach can achieve higher critical stresses and knockdown factors than any previously known monocoque cylindrical shells. It is also found that these shells have superior mass efficiency to almost all previously reported stiffened shells.

Experimental studies on a design of composite wavy shell obtained through the proposed method are presented in this thesis. A method of making composite wavy shells and a photogrametry technique of measuring full-field geometric imperfections have been developed. Numerical predictions based on the measured geometric imperfections match remarkably well with the experiments. Experimental results confirm that the wavy shells are not sensitive to imperfections and can carry axial compression with superior mass efficiency.

An efficient computational method for the buckling analysis of corrugated and stiffened cylindrical shells subject to axial compression has been developed in this thesis. This method modifies the traditional Bloch wave method based on the stiffness matrix method of rotationally periodic structures. A highly efficient algorithm has been developed to implement the modified Bloch wave method. This method is applied in buckling analyses of a series of corrugated composite cylindrical shells and a large-scale orthogonally stiffened aluminum cylindrical shell. Numerical examples show that the modified Bloch wave method can achieve very high accuracy and require much less computational time than linear and nonlinear analyses of detailed full finite element models.

This thesis presents parametric studies on a series of externally pressurized pseudo-spherical shells, i.e., polyhedral shells, including icosahedron, geodesic shells, and triambic icosahedra. Several optimization methods have been developed to further improve the performance of pseudo-spherical shells under external pressure. It has been shown that the buckling pressures of the shell designs obtained from the optimizations are much higher than the spherical shells and not sensitive to imperfections.

Instituciones Microfinancieras y banca tradicional: diferencias en funcionamiento y resultados durante la crisis

Español: A finales del 2007 muchas entidades financieras comenzaron a mostrar cifras negativas en sus balances y tras la quiebra de entidades de gran peso económico como el banco Lehman Brothers en Estados Unidos en septiembre del 2008, el mundo se ha visto envuelto en una crisis económica de la que parece no verse el final. Las entidades financieras tradicionales han centrado sus esfuerzos en obtener las mayores rentabilidades posibles, invirtiendo sus recursos en activos muy arriesgados, que si bien en un principio generaban beneficios muy elevados, a día de hoy han hecho quebrar muchas entidades a nivel mundial y han provocado la pérdida de los ahorros de muchos ciudadanos. Ajenas a esto se encuentran las entidades microfinancieras, que con un enfoque muy diferente al de la banca tradicional, se han centrado en proporcionar financiación a aquellos que dada su situación económica y falta de garantías no podían acudir al sector financiero tradicional. Tras realizar un análisis de los resultados de ambos modelos financieros desde 2006 hasta 2012, se ha podido comprobar como el sector microfinanciero presenta resultados más favorables y muestra una mayor prosperidad de cara al futuro. Por lo general, estas entidades mantienen niveles de solvencia más elevados y emplean todos sus recursos en proporcionar financiación a sus clientes. Finalmente, la solución a los problemas del sistema financiero tradicional se basa en un aumento de los niveles de capital de sus entidades, volviendo a un modelo de banca tradicional centrado en ofrecer financiación al público, con provisiones más liquidas y mayores garantías ante necesidades de liquidez como las retiradas masivas de depósitos recientemente sufridas.

MEMS for Diabetic Retinopathy

As the worldwide prevalence of diabetes mellitus continues to increase, diabetic retinopathy remains the leading cause of visual impairment and blindness in many developed countries. Between 32 to 40 percent of about 246 million people with diabetes develop diabetic retinopathy. Approximately 4.1 million American adults 40 years and older are affected by diabetic retinopathy. This glucose-induced microvascular disease progressively damages the tiny blood vessels that nourish the retina, the light-sensitive tissue at the back of the eye, leading to retinal ischemia (i.e., inadequate blood flow), retinal hypoxia (i.e., oxygen deprivation), and retinal nerve cell degeneration or death. It is a most serious sight-threatening complication of diabetes, resulting in significant irreversible vision loss, and even total blindness.

Unfortunately, although current treatments of diabetic retinopathy (i.e., laser therapy, vitrectomy surgery and anti-VEGF therapy) can reduce vision loss, they only slow down but cannot stop the degradation of the retina. Patients require repeated treatment to protect their sight. The current treatments also have significant drawbacks. Laser therapy is focused on preserving the macula, the area of the retina that is responsible for sharp, clear, central vision, by sacrificing the peripheral retina since there is only limited oxygen supply. Therefore, laser therapy results in a constricted peripheral visual field, reduced color vision, delayed dark adaptation, and weakened night vision. Vitrectomy surgery increases the risk of neovascular glaucoma, another devastating ocular disease, characterized by the proliferation of fibrovascular tissue in the anterior chamber angle. Anti-VEGF agents have potential adverse effects, and currently there is insufficient evidence to recommend their routine use.

In this work, for the first time, a paradigm shift in the treatment of diabetic retinopathy is proposed: providing localized, supplemental oxygen to the ischemic tissue via an implantable MEMS device. The retinal architecture (e.g., thickness, cell densities, layered structure, etc.) of the rabbit eye exposed to ischemic hypoxic injuries was well preserved after targeted oxygen delivery to the hypoxic tissue, showing that the use of an external source of oxygen could improve the retinal oxygenation and prevent the progression of the ischemic cascade.

The proposed MEMS device transports oxygen from an oxygen-rich space to the oxygen-deficient vitreous, the gel-like fluid that fills the inside of the eye, and then to the ischemic retina. This oxygen transport process is purely passive and completely driven by the gradient of oxygen partial pressure (pO₂). Two types of devices were designed. For the first type, the oxygen-rich space is underneath the conjunctiva, a membrane covering the sclera (white part of the eye), beneath the eyelids and highly permeable to oxygen in the atmosphere when the eye is open. Therefore, sub-conjunctival pO₂ is very high during the daytime. For the second type, the oxygen-rich space is inside the device since pure oxygen is needle-injected into the device on a regular basis.

To prevent too fast or too slow permeation of oxygen through the device that is made of parylene and silicone (two widely used biocompatible polymers in medical devices), the material properties of the hybrid parylene/silicone were investigated, including mechanical behaviors, permeation rates, and adhesive forces. Then the thicknesses of parylene and silicone became important design parameters that were fine-tuned to reach the optimal oxygen permeation rate.

The passive MEMS oxygen transporter devices were designed, built, and tested in both bench-top artificial eye models and in-vitro porcine cadaver eyes. The 3D unsteady saccade-induced laminar flow of water inside the eye model was modeled by computational fluid dynamics to study the convective transport of oxygen inside the eye induced by saccade (rapid eye movement). The saccade-enhanced transport effect was also demonstrated experimentally. Acute in-vivo animal experiments were performed in rabbits and dogs to verify the surgical procedure and the device functionality. Various hypotheses were confirmed both experimentally and computationally, suggesting that both the two types of devices are very promising to cure diabetic retinopathy. The chronic implantation of devices in ischemic dog eyes is still underway.

The proposed MEMS oxygen transporter devices can be also applied to treat other ocular and systemic diseases accompanied by retinal ischemia, such as central retinal artery occlusion, carotid artery disease, and some form of glaucoma.

Repasse cambial reverso: uma avaliação sobre a relação entre taxa de câmbio e IPCA no Brasil (1999-2007)

A presente dissertação discute o repasse cambial para o IPCA na economia brasileira durante o período compreendido entre janeiro de 1999 e dezembro de 2007. A ampla maioria dos trabalhos que versam sobre este tema aborda a redução do repasse após a adoção do regime de metas de inflação e/ou tem como único foco o impacto das desvalorizações cambiais no aumento dos índices de preços. Este trabalho, por outro lado, aborda de maneira explícita o papel da valorização do Real sobre a variação do IPCA no período recente, configurando o que denominamos de repasse cambial reverso. Para tanto, estimamos o repasse cambial por meio de um modelo de vetores auto-regressivos tanto para o referido período (1999-2007), quanto para outros dois recortes temporais: entre janeiro de 1999 e junho 2003 (amostra 1), período no qual se verifica uma tendência de desvalorização cambial e aumento de preços; e de julho de 2003 a dezembro de 2007 (amostra 2), período caracterizado pelo processo inverso, de valorização da taxa de câmbio e de cumprimento das metas de inflação na maioria dos anos. Os principais resultados foram: (i) no longo prazo os coeficientes de repasse cambial para o IPCA para as duas amostras foram superiores àqueles verificados para o período completo; e (ii) o repasse estimado para a amostra 2 foi bem elevado, ainda que inferior àquele obtido para a amostra 1. Estes resultados reforçam o argumento de que a taxa de câmbio desempenhou um papel proeminente no controle da inflação no período 2003-2007.

Criterios para la aplicación de coeficientes modificativos de la curva S-N de fatiga

[ES]Este Trabajo de Fin de Grado tiene como objeto crear un programa que sirva como herramienta para los cálculos en las propiedades a fatiga de una pieza. El conjunto del trabajo se centra en su creación mediante la herramienta Excel. El programa cuenta con tres diferentes pestañas: una para los datos que debe introducir el usuario, otra correspondiente a los cálculos y por último una en la que aparecen los resultados. El usuario debe conocer las propiedades de la probeta del material a ensayar, así como el rango de ciclos en el cual se va a trabajar (siempre en un rango de ciclos medio alto). A partir de estas informaciones de la probeta, y gracias a la curva de Basquin y la ecuación de Marin, el programa será capaz de obtener la curva de resistencia a fatiga correspondiente para la pieza. Se incluyen también casos especiales en los que se realicen tratamientos mecánicos de mejora, con una tensión límite del proceso. Para obtener la curva S-N de la pieza se pedirá información en la pestaña de interfaz con el usuario sobre distintas propiedades de la pieza, que permitan así calcular los valores de los coeficientes de Marín gracias a la base de datos que contiene el programa. El usuario tiene también la opción de introducir él mismo los valores de los coeficientes para así obtener una curva que se aproxime más a sus resultados experimentales. En resumen, la función del programa es la de ser una calculadora de la resistencia fatiga de la pieza a partir de los datos que se disponen de la probeta.

Theory of the positive column of a gas discharge

An attempt is made to provide a theoretical explanation of the effect of the positive column on the voltage-current characteristic of a glow or an arc discharge. Such theories have been developed before, and all are based on balancing the production and loss of charged particles and accounting for the energy supplied to the plasma by the applied electric field. Differences among the theories arise from the approximations and omissions made in selecting processes that affect the particle and energy balances. This work is primarily concerned with the deviation from the ambipolar description of the positive column caused by space charge, electron-ion volume recombination, and temperature inhomogeneities.

The presentation is divided into three parts, the first of which involved the derivation of the final macroscopic equations from kinetic theory. The final equations are obtained by taking the first three moments of the Boltzmann equation for each of the three species in the plasma. Although the method used and the equations obtained are not novel, the derivation is carried out in detail in order to appraise the validity of numerous approximations and to justify the use of data from other sources. The equations are applied to a molecular hydrogen discharge contained between parallel walls. The applied electric field is parallel to the walls, and the dependent variables—electron and ion flux to the walls, electron and ion densities, transverse electric field, and gas temperature—vary only in the direction perpendicular to the walls. The mathematical description is given by a sixth-order nonlinear two-point boundary value problem which contains the applied field as a parameter. The amount of neutral gas and its temperature at the walls are held fixed, and the relation between the applied field and the electron density at the center of the discharge is obtained in the process of solving the problem. This relation corresponds to that between current and voltage and is used to interpret the effect of space charge, recombination, and temperature inhomogeneities on the voltage-current characteristic of the discharge.

The complete solution of the equations is impractical both numerically and analytically, and in Part II the gas temperature is assumed uniform so as to focus on the combined effects of space charge and recombination. The terms representing these effects are treated as perturbations to equations that would otherwise describe the ambipolar situation. However, the term representing space charge is not negligible in a thin boundary layer or sheath near the walls, and consequently the perturbation problem is singular. Separate solutions must be obtained in the sheath and in the main region of the discharge, and the relation between the electron density and the applied field is not determined until these solutions are matched.

In Part III the electron and ion densities are assumed equal, and the complicated space-charge calculation is thereby replaced by the ambipolar description. Recombination and temperature inhomogeneities are both important at high values of the electron density. However, the formulation of the problem permits a comparison of the relative effects, and temperature inhomogeneities are shown to be important at lower values of the electron density than recombination. The equations are solved by a direct numerical integration and by treating the term representing temperature inhomogeneities as a perturbation.

The conclusions reached in the study are primarily concerned with the association of the relation between electron density and axial field with the voltage-current characteristic. It is known that the effect of space charge can account for the subnormal glow discharge and that the normal glow corresponds to a close approach to an ambipolar situation. The effect of temperature inhomogeneities helps explain the decreasing characteristic of the arc, and the effect of recombination is not expected to appear except at very high electron densities.

The significance of sedimentation and sediments to phytoplankton growth in drinking-water reservoirs

In the mesotrophic-eutrophic Saidenbach Reservoir in Saxony, the nanoplankton and cyanobacteria have increased at the expense of diatom dominance, due to a doubling of the external phosphorus load in the last 15 years. However, the phosphorus sedimentation flux is still very high (up to 80% of the input), corresponding to more than 2 g m2 d-1 in terms of dry weight. There is a strong correlation between the abundance of diatoms in the euphotic zone and their sedimentation flux (with a delay of about 2 weeks). Only about 25% of the deposited material could be clearly attributed to plankton biomass; the remainder resulted from flocculation and precipitation processes or directly from the inflow of clay minerals. The ash content of the deposited material was high (73%). Thus the sedimentation flux can be considered to operate as an internal water-treatment/oligotrophication process within the lake. The neighbouring Neunzehnhain Reservoir still has a very clear water with a transparency up to 18 m depth. Though the sediment was not much lower than Saidenbach sediment in total phosphorus and total numbers of bacteria, sulphide was always absent and the ratio of Fe 2+ to Fe 3+ was very low in the upper (0- 5 cm) layer. Thus the external and internal phosphorus loads do not attain the critical level necessary to induce a ”phosphorus - phytoplankton” feedback loop.

Nd3+螯合物的含氢有机溶液光谱性能研究

Tris-thenoyltrifluroacetonate of Nd3+ has been prepared and dissolved in DMF solation with very high concentration, and the contained hydrogen has not been substituted by deuterium. The absorption spectrum, emission spectrum, and fluorescence lifetime of the solution were measured. Very obvious characteristic fluorescence peaks were observed at 898 and 1058 nm. Based on Judd-Ofelt theory, three intensity parameters were obtained: Omega(2) = 4.9 x 10(-20) cm(2), Omega(4) = 5.1 x 10(-20) cm(2) and Omega(6) = 2.5 x 10(-20) cm(2). Line strengths S-cal, oscillator strengths f(cal), radiative transition probabilities A(ed), radiative lifetimes tau(r) and branch ratios beta were calculated too. The measured lifetime tau of 1058 nm peak is 460 mu s, and that of 898 nm 505 mu s. Comparison between theoretically computed radiative lifetime tau(r)(682 mu s) and the measured lifetime indicates that the non-radiative transition probability of the solution is very low and the fluorescence quantum efficiency very high. High values of three intensity parameters prove the high asymmetric surroundings of Nd3+, which is important for Nd3+ to absorb the excitation energy. Spectropic quality factor Omega(4)/Omega(6) > 1 makes radiation at 898 nm stronger than at 1058 nm.

Optimisation of the first principle code Octopus for massive parallel architectures: application to light harvesting complexes

150 p.

Alterações estruturais pancreáticas e metabólicas em camundongos C57BL/6 alimentados com dieta de alta densidade energética

Camundongos C57BL/6 machos com oito semanas de idade alimentados com diferentes dietas durante 16 semanas: de alta densidade energética (ADE, 26% das calorias de carboidrato, 60% de gordura e 14% de proteína) ou dieta padrão (CO, 76% das calorias de carboidrato, 10% de gordura e 14% de proteína). Comparado ao grupo CO, o grupo ADE apresentou maior ganho de massa e maior depósito de tecido adiposo, bem como maiores níveis plasmáticos de triglicerídeos, LDL-c, ALT, AST e fosfatase alcalina e com maiores níveis de corticosterona plasmática, glicose de jejum e insulina com uma consequente resistência à insulina (avaliado pelo HOMA-IR). No TOTG, a glicose plasmática aumentou ao máximo após 15 min. da administração de glicose oral em ambos os grupos. Entretanto os níveis de glicose foram maiores no grupo ADE que no grupo CO (P<0.0001). O clearance de glicose no grupo ADE foi reduzido, permanecendo aumentado após 120 min. (P<0.001), caracterizando intolerância a glicose no grupo ADE. O teste intraperitoneal de tolerância à insulina mostrou uma rápida redução na glicose plasmática após 15 minutos da administração de insulina em ambos os grupos, mas significativamente aumentada no grupo ADE (P<0.0001), permanecendo desta forma até os 120 min. após a administração. Concluindo, camundongos C57BL/6 respondem a dieta ADE desenvolvimento os sinais e sintomas associados à síndrome metabólica observada em humanos. Por conseguinte, este modelo animal poderá ajudar-nos a compreender melhor as alterações em órgãos alvos associadas com a síndrome metabólica, assim como a possibilidade de tratamentos diferentes.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Remodelamento do fígado, pâncreas e tecido adiposo em modelo experimental de síndrome metabólica tratado com telmisartana, sitagliptina e metformina

A intervenção farmacológica pode minimizar ou até mesmo reverter o remodelamento adverso em órgãos num modelo de síndrome metabólica. Este trabalho teve como objetivo avaliar os efeitos das monoterapias e associações medicamentosas sobre a morfologia do tecido adiposo, remodelamento hepático e pancreático em camundongos C57bl/6 alimentados com dieta very high-fat. Camundongos C57bl/6 machos foram alimentados com dieta very high-fat (HF, 60% de lipídios) ou dieta padrão (SC, 10% de lipídios) por 10 semanas, quando foram iniciados os tratamentos: HF-T (HF + Telmisartana, 5.2mg/Kg/dia), HF-S (HF + Sitagliptina, 1.08g/Kg/dia), HF-M (HF + Metformina, 310.0mg/Kg/dia) e as associações medicamentosas HF-TM, HF-TS e HF-SM. Os grupos tratados também tiveram livre acesso à dieta high fat e os tratamentos duraram 6 semanas. Técnicas morfométricas, estereológicas, imunohistoquímicas, ELISA, western blotting e microscopia eletrônica foram utilizadas. A dieta high-fat causou sobrepeso, intolerância oral à glucose, hiperinsulinemia, hipertrofia de ilhotas e adipócitos, grau 2 de esteatose hepatica (<33%) redução da expressão de PPAR-alfa e de GLUT-2, concomitante com aumento da expressão de SREBP-1 no grupo HF (P<0.0001). Por outro lado, todos os tratamentos resultaram em perda de peso significativa, reversão da resistência à insulina, hipertrofia de ilhotas e adipócitos e alívio da esteatose hepática. Somente os grupos HF-T e HF-TS apresentaram massa corporal similar ao grupo SC ao final do experimento, sendo que o ultimo também apresentou reversão da esteatose hepática. O aumento da expressão do PPAR-alfa paralelamente ao decréscimo da expressão do SREBP-1 explica os achados favoráveis para o fígado. A normalização do tamanho do adipócito foi consistente com os níveis maiores de adiponectina e com a redução dos níveis de TNF-alfa (P<0.0001) nos grupos tratados.Todos os tratamentos foram eficazes para controlar a síndrome metabólica. Os melhores resultados foram alcançados com a telmisartana e sitagliptina como monoterapias ou como associação entre essas, combinando a ativação parcial do PPAR-alfa no fígado com a extensão do tempo de ação das incretinas

Undertreatment of human immunodeficiency virus in psychiatric inpatients: a cross-sectional study of seroprevalence and associated factors

Background: The aims of this study were to evaluate the prevalence of HIV and its associated demographic and clinical factors among psychiatric inpatients of a general hospital. Methods: This was a single-center, observational, cross-sectional study that included patients consecutively admitted to our unit aged 16 years or older and with no relevant cognitive problems. The patients were evaluated using a semistructured interview and an appropriate test for HIV infection. Results: Of the 637 patients who were screened, 546 (86%) who consented to participate were included in the analyses. Twenty-five (4.6%, 95% confidence interval [CI] 3.0-6.8) patients were HIV-positive. The prevalence was higher among patients with substance misuse (17.4%, 95% CI 9.7-28.8). All except one of the 25 patients knew of their seropositive condition prior to participation in the study. Only 14 (56%) of the 25 seropositive patients had previously received pharmacological treatment for their infection. According to the multiple logistic regression analysis, the likelihood of HIV infection was lower in patients with higher levels of education and higher among patients who were single, had history of intravenous drug use, and had an HIV-positive partner, particularly if they did not use condoms. Among the patients with HIV infection, 18 (72%) had a history of suicide attempts compared with 181 (34.7%) of the patients without HIV infection (relative risk 2.1, 95% CI 1.6-2.7; P<0.001). Conclusion: HIV infection is highly prevalent in patients admitted to a psychiatric unit, especially those with a diagnosis of substance misuse. Seropositive patients show very poor treatment adherence. The risk of suicide seems to be very high in this population. Implementing interventions to reduce the suicide risk and improve adherence to antiretroviral therapy and psychotropic medications seems crucial.

Interações sobre a pluviosidade em encostas de clima tropical úmido e os movimentos de massa: o caso de sub-bacias do Alto Rio São João - RJ

Cada vez são mais comuns problemas relacionados a movimentos de massa nas encostas de clima tropical no Estado do Rio de Janeiro, especialmente na Serra do Mar, provocados por acumulados pluviométricos intensos. A ocupação humana desordenada de áreas sensíveis a tais processos geomorfológicos, bem como as condicionantes geológicas, geomorfológicas, pedológicas e de uso e cobertura do solo são apontadas como fatores cruciais na explicação desses processos. O maior conhecimento da dinâmica pluviométrica bem como suas interações com tais aspectos físicos ligados ao relevo parece ser a chave dessa maior compreensão desses fenômenos. Assim foram realizadas pesquisas relacionadas aos volumes e intensidades das chuvas na região do Alto Curso do Rio São João, bem como uma análise dos movimentos de massa identificados através de imagens de satélite e in loco, como forma de fornecer subsídios à melhor gestão do espaço dessas regiões montanhosa estão vulneráveis a movimentos de massa. A correlação entre os acumulados e a intensidade pluviométrica com fenômenos climáticos de escala global, como El Niño e La Niña também foi contemplada nessa pesquisa, mostrando uma relação mais alta com relação à intensidade da chuva mensal para anos de El Niño e para anos de La Niña uma reduzida ocorrência dessas intensidades pluviométricas. Os estudos revelaram que os tipos de solos e sua cobertura e uso têm uma grande influência na deflagração de movimentos de massa. Foram observados um número reduzido de movimentos de massa em áreas naturais e uma maior proporção desses movimentos em áreas utilizadas para a atividade da pecuária na região. Grande parte dos movimentos de massa ocorreram em áreas de Cambissolos (áreas mais elevadas) e Latossolos (áreas de encostas em menores altitudes). Ambos os solos são mais espessos do que os encontrados em áreas mais declivosas, apresentando maior acúmulo de materiais a serem mobilizados durante grandes acumulados pluviométricos, gerando movimentos de massa. A análise mostrou também que áreas mais chuvosas e com maior ocorrência de acumulados pluviométricos extremos, acima de 100 mm/dia e acima de 30mm/mês concentraram um número maior de movimentos de massa, como a região mais próxima da estação de Quartéis (porção leste). Por outro lado áreas bastante elevadas, com altas declividades, porém com predomínio de Mata Atlântica e áreas com solos menos espessos, como os Neossolos Litólicos, se mostraram com um número reduzido desses processos. Enfim esse estudo mostrou a necessidade de se gerir melhor os espaços dessas áreas sensíveis sob o ponto de vista geomorfológico, até por que são áreas na periferia de regiões densamente habitadas e cujas demandas tendem a se tornar cada vez mais marcantes, o que pode gerar problemas locais, atingindo sua população e economia, com sérias conseqüências para o ambiente.