Corrosion behaviour of a pressure die cast magnesium alloy

High pressure die casting is the most important production method for casting magnesium alloy components, and uniformity of appearance is an important criterion for acceptance of a component by customers. This paper investigates the influence of uniformity in surface appearance of diecast AZ91D plates on their corrosion behaviour. Through immersion, hydrogen collection and weight loss measurements it was found that corrosion is more likely to occur on the areas of the plate that appear to be darker, leading to a non-uniformly corroded surface. Microstructural analysis showed that the non-uniformity in appearance is related to a difference in the morphology and distribution of porosity across the surface of a diecast AZ91D plate. The darker areas of the surface are high in porosity which breaks the continuity of the beta-phase network and provides shortcut paths for corrosion from the surface to the interior of the casting. The brighter shiny areas of the surface are much less porous, with isolated pores being confined by corrosion resistant beta-precipitates thus reducing the corrosion rate.

Views from Hamburg : the Juno Trader case or how to make sense of the coastal State's rights in the light of its duty of prompt release

Special edition: The United Nations and international legal order - the case of the Juno Trader - on 18 December 2004, the International Tribunal for the Law of the Sea ordered the prompt release of a refrigerated cargo vessel and its cargo for fisheries violations in an exclusive economic zone - Tribunal unanimously decided that the vessel and cargo be released, upon posting of a bond in the form of a bank guarantee - crew should be free to leave without conditions - in this case, on prompt release, the Tribunal made valuable contributions to existing case law on the issue - shows that specialised tribunals may perform a decentralised application of the international rule of law - crystallises international fundamental standards of fairness and human rights.

Textbook on contract law

This ninth edition of the established Textbook on Contract Law by Jill Poole provides a wide-ranging and straightforward exposition of contract law. The text opens with an overview of the main issues surrounding contract law which places the subject in its wider context, then goes on to give a clear explanation of all the major areas of contract law encountered on undergraduate courses. Features of the book includes chapter summaries to draw key themes and issues together; examples and questions to encourage a deeper understanding of the often complex points of law; and extensive further reading lists of both texts and articles to guide students towards the most relevant and up-to-date resources available. Online resource centre Lecturer resources - Testbank of 150 multiple-choice questions Student resources - Guidance on answering questions in contract law - Questions and answers - Student questions - Updates - Web links

The effects of metallurgical variables on the mechanical properties of high-chromium cast irons

The.use of high-chromium cast irons for abrasive wear resistance is restricted due to their poor fracture toughness properties. An.attempt was made to improve the fracture characteristics by altering the distribution, size and.shape of the eutectic carbide phase without sacrificing their excellent wear resistance. This was achieved by additions of molybdenum or tungsten followed by high temperature heat treatments. The absence of these alloying elements or replacement of them with vanadium or manganese did not show any significant effect and the continuous eutectic carbide morphology remained the same after application of high temperature heat treatments. The fracture characteristics of the alloys with these metallurgical variables were evaluated for both sharp-cracks and blunt notches. The results were used in conjunction with metallographic and fractographic observations to establish possible failure mechanisms. The fracture mechanism of the austenitic alloys was found to be controlled not only by the volume percent but was also greatly influenced by the size and distribution of the eutectic carbides. On the other hand, the fracture mechanism of martensitic alloys was independent of the eutectic carbide morphology. The uniformity of the secondary carbide precipitation during hardening heat treatments was shown to be a reason for consistant fracture toughness results being obtained with this series of alloys although their eutectic carbide morphologies were different. The collected data were applied to a model which incorporated the microstructural parameters and correlated them with the experimentally obtained valid stress intensity factors. The stress intensity coefficients of different short-bar fracture toughness test specimens were evaluated from analytical and experimental compliance studies. The.validity and applicability of this non-standard testing technique for determination of the fracture toughness of high-chromium cast irons were investigated. The results obtained correlated well with the valid results obtained from standard fracture toughness tests.