Pedagoger i det sociala uppdragets gränstrakter : Att hantera familjerättsliga processer, hot och våld

Pedagogues in the borderland of their social task: dealing with family law proceedings, threats and violence Drawing upon an explorative study of family law proceedings from a school perspective, the aim of this paper is to examine the school staff’s strategies for solving or coping with problematic situations in this context. Gendered conflicts between adults and violence are extreme cases for pedagogues in school and preschool. How do the staff cope with their own and the children’s vulnerability? Based upon interviews with 22 informants, the staff’s strategies are outlined and discussed in relation to organizational and professional circumstances and intersecting social relations of power. An analytical construction of six types of proactive and reactive strategies, ranging from distance keeping to normalization of own exposure, is utilized in the analysis. Findings suggest that the staff’s strategies to handle challenging events in this context vary with the parent’s gender, class position and ethnicity. Further, it is argued that creating a sense of safety and promoting learning among the children may be obstructed by lack of support from the school’s organization, demands on staff to perform customer oriented attitudes towards parents and lack of clarity concerning the limits of the social task. Conflicts between the organization and profession on the one hand and the educational and the social task on the other hand, are thus illuminated. In conclusion, a further aim of this article is to contribute to broader discussions on men’s violence against women and children – in families as well as in workplaces and in the intersection between these two areas. 

Ökat hot och våld i arbetslivet – en följd av förändrade arbetsförhållanden? : En studie utifrån de svenska Arbetsmiljöundersökningarna 1991–2005

Increase in work related violence. A reflection of changes in working conditions? An analysis based on the Swedish Work Environment surveys. Victim surveys from Sweden show that the proportion reporting exposure to work related violence has increased. On the basis of the Swedish Work Environment surveys 1991–2005 this article focuses on the following questions: What kind of situations and working conditions are related to workplace violence? And, has the number of employees exposed to these working conditions increased parallel to the rise of reported workplace violence? Logistic regression analysis shows that some situations and working conditions are indeed related tothe risk of violence. To some extent exposure to these working conditions co-varies with exposure to violence. This result is more prominent for women than for men. Further research is needed to understand how changes in working conditions affect the risk of violence and the development thereof, not least from a gender perspective. Even so, changes in working conditions can not alone explain the increase of reported workplace violence in Sweden during this period. It seems that the influence of changed working conditions offers an interesting complement to criminological theories of broadened definitions and decreasing tolerance against violence in problematizing how an increase in reported workplace violence should and could be understood.

Estudo da morfologia e cristalinidade em polipropileno isotático submetido a deformação uniaxial em temperatura ambiente

A utilidade de alguns polímeros depende principalmente de suas propriedades elétricas, ópticas, bioquímicas e térmicas, porém na maioria dos exemplos a propriedade fundamental para as aplicações reside em suas propriedades mecânicas. Os mecanismos de deformação em polímeros semi-cristalinos são em geral complexos e dependem do arranjo e do tamanho dos cristais. A deformação plástica de polímeros semi-cristalinos é produzida pela força aplicada ao sistema, com modificações de suas propriedades termodinâmicas e morfológicas, obtendo-se materiais com novas propriedades e aplicações. Os sistemas estudados neste trabalho, consistem de amostras de polipropileno isotático, (i-PP) comercial, fornecidas pela OPP Petroquímica (III Pólo Petroquímico – Triunfo / RS). As amostras, na forma de grânulos, foram moldadas pelo processo de injeção onde duas massas molares diferentes foram investigadas. As placas moldadas por injeção, com espessura de aproximadamente 3,0 mm, foram cortadas nas dimensões padrões de 17,2 mm X 4,7 mm e após, deformadas plasticamente por compressão plana uniaxial à temperatura ambiente. A análise da morfologia e cristalinidade deste material foram realizadas utilizando as técnicas de difração raios-X em alto ângulo (WAXD), espalhamento de raios-X em baixo ângulo (SAXS), Microscopia Eletrônica de Varredura (MEV), e Microscopia Eletrônica de Transmissão (MET). Através da técnica de WAXD foi possível a identificação das diferentes fases cristalinas α e β do i-PP, antes e depois das amostras serem deformadas por compressão uniaxial. A determinação da cristalinidade foi realizada via difração de raios-X, utilizando as geometrias θ - 2θ e de Debye Scherrer, sendo a quantificação realizada a partir da área dos picos cristalinos obtidos a partir da indexação das reflexões de Bragg, utilizando o programa FULLPROF. Como resultado obtido, foi verificado uma significativa diminuição da cristalinidade com o aumento da deformação por compressão aplicada sobre as amostras. Com as medidas de SAXS, foram observados os perfis de espalhamento anisotrópicos e isotrópicos para as amostras sem deformação para maior e menor massa molar, respectivamente. O período longo (L) do material, definido pela soma da espessura lamelar do cristal (dc) e a espessura da camada amorfa (da), também foi obtido para estas amostras. A deformação causou uma diminuição do L, o que levou a diminuição da dc, seguido pelo aumento da da. Porém, com o aumento da deformação observa-se uma diminuição das intensidades espalhadas em torno do eixo azimutal. Este efeito pode ser atribuído ao aumento da fase amorfa seguido pela diminuição da fase cristalinidade. As modificações morfológicas ocorridas nas estruturas esferulíticas e lamelares foram avaliadas utilizando a Microscopia Eletrônica de Varredura (MEV), e a Microscopia Eletrônica de Transmissão (MET). O efeito da deformação plana por compressão ficou registrado nas imagens de XXIX MEV e MET, onde verificou-se o alongamento das estruturas esferulíticas na direção de fluxo, seguido da destruição parcial da mesma em deformação por compressão maiores. As imagens obtidas em MEV e MET, foram tratadas a fim de se verificar o grau de orientação e a distribuição da orientação em nível microestrutural por meio do método direto das secantes em um plano e da rosa dos interceptos. Neste caso, quando a rosa apresenta duas pétalas, tem-se um eixo de orientação; com quatro pétalas, dois eixos de orientação, e assim sucessivamente.Em um sistema isométrico sem nenhuma orientação, a rosa dos interceptos apresentará como resultado uma circunferência. Os resultados obtidos para as imagens de MEV e MET em nível esferulítico mostraram que a rosa dos interceptos parte de uma estrutura simétrica com baixo grau de orientação para uma estrutura orientada definida por um sistema de duas pétalas, seguido pelo aumento do grau de orientação para pressões de deformações maiores. Para as imagens de MET em nível lamelar observou-se o aumento do grau de orientação devido o aumento da deformação até 10 MPa. Neste caso, a rosa dos interceptos parte de uma estrutura definida por quatro pétalas (sistema dois eixos de orientação) para uma estrutura de duas pétalas, apresentando um sistema com um eixos de orientação. Porém, para pressões de deformações entre 20-3200 MPa observou-se a diminuição do grau de orientação, pois uma maior desordem é observado nas estruturas devido a amorfização do material, sendo a rosa dos interceptos demostrada por uma estrutura simétrica. Medidas com termopar foram realizadas para verificação do comportamento térmico no momento da deformação. Neste caso, foi verificado um aumento significativo da temperatura com o aumento da deformação. Porém, para as amostras deformadas com 3200 MPa foi observado dois picos de temperatura. Onde o primeiro pico foi atribuído ao comportamento adiabático seguido pela relaxação do material, enquanto o segundo pico foi verificado com grande aumento de temperatura no momento da explosão do material.

Performance de fundos mútuos de investimento no Brasil : uma análise dos fenomenos de "hot-hands", sinalização e persistência de retornos

o presente trabalho apresenta um resumo não só dos conceitos básicos sobre fundos de investimento, como também seu histórico e evolução no Brasil e no mundo, o contexto institucional nacional e os principais ratings de classificação de performance. Sua parte empírica foca-se no exame do fenômeno de persistência de performance para os fundos de investimentos ativos brasileiros entre julho de 1996 e junho de 2001. o estudo empírico dividiu-se em três partes: a comparação do retomo das categorias de fundos de ações ativos, de renda fixa e multimercados com os respectivos benchmarks e fundos passivos; a verificação do fenômeno de persistência baseando-se em Malkiel (1995); e a análise dos resultados de investimentos em portfólios formados pelos grupos de uma mesma categoria pertecentes a um mesmo percentil de retomo não ajustado ao risco.

Obtenção de uma porcelana dielétrica a partir de matérias-primas do Rio Grande do Norte

The dielectric porcelain is usually obtained by mixing various raw materials proportions and is used in the production of electronic equipment for various applications, from capacitors of high and low Power to insulators for low, medium, high and extra high voltage, which are used in distribution lines and transmission of electricity.This work was directed to the s tudy of technological properties of technic porcelain, made from raw materials extracted from pegmatites found in the regions of Seridó and the Alto Oeste of Rio Grande do Norte, which are made of kaolin, quartz and feldspar, abundant and high quality in these regions. The technic ceramics were obtained by mixing in appropriate levels, kaolin, feldspar, quartz and clay, the last item from a pottery in the city of Sao Gonçalo do Amarante, Rio Grande do Norte. During the development the following characterizations correlated to raw materials were made: laser particle sizing, x-ray diffraction, DTA and TG. The compositions studied were formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150 to 1350ºC and levels (times) of sintering between 30, 60, 90 and 120 minutes. The characterization of the samples were taken from the analysis of weight loss, linear shrinkage, porosity, stoneware curve, bulk density, flexural strength of three points, SEM and X-ray diffraction, TMA, Dielectric and cross Resistivity. The studied materials can be employed in producing the objects used in electrical engineering such as: insulators for low, medium and high-voltage electrical systems, command devices, bushing insulation for transformers, power capacitors, spark plugs, receptacles for fluorescent and incandescent light bulbs and others

Efeito da adição de feldspato e/ou resíduo de caulin em formulações à base de argila ilítica

The red pottery industry in Piauí state is well developed and stands out at the national context for the technical quality of its products. The floor and wall tile industry, however, is little developed since the state has only one company that produces red clay-based ceramic tiles. This thesis aims at using the predominantly illitic basic mass of the above mentioned industry, with the addition of feldspar and/or kaolin residue in order to obtain products of higher technical quality. Kaolin residue consists basically of kaolinite, muscovite mica and quartz; the feldspar used was potassic. In this experiment, basic mass (MB) was used for experimental control and fifteen formulations codified as follows: F2, F4, F8, F16, F32, FR2, FR4, FR8, FR16, FR32, R2, R4, R8, R16 and R32. All raw materials were dry-milled, classified, formulated and then humidified to 10% water. Thereafter, test samples were produced by unixial pressing process in a rectangular steel matrix (60.0 x 20.0 x 5.0) mm3 at (25 MPa). They were fired at four temperatures: 1080°C, 1120°C, 1160°C, with a heating rate of 10°C/min during up to 10 min in an electric oven, and the last one in an industrial oven with a peak of 1140°C, aim ing to confirm the results found in laboratory and, finally, technological tests were performed: MEA, RL, AA, PA, TRF and PF. The results revealed that the residue under study can be considered a raw material with large potential in the industry of red clay-based ceramic tiles, since the results found both in laboratory and in the industry have shown that the test samples produced from the formulations with up to 4% feldspar and those produced with up to 8% feldspar and residue permitted a reduction in the water absorption rate and an increase in the mechanical resistance while those samples produced with up to 4% residue had an increase in the mechanical resistance when compared to those produced from the basic mass and that the formulation with 2% feldspar and residue presented the best technological properties, lowering the sintering temperature down to 1120°C

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Aplicação da metodologia de planejamento de experimentos para formulação de massas cerâmicas para telhas

Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations

Estudo de Matérias-Primas do Rio Grande do Norte para Uso em Revestimento Poroso: Influência do teor de dolomita e temperatura de calcinação nas propriedades físico-mecânicas

The state of Rio Grande do Norte presents a great potentiality for the production of ceramic tiles because of having natural raw material in quantity and quality making its economical exploration possible, beyond the great energetic differential of the state, the natural gás. This works aims to study the influence of the dolomite and granulometry concentration and calcinations temperature in the obtaining of formulations for porous coverings which have to be coherent to the project,s specifications. The experiments have involved the physical-chemical and mineralogical characterizations of raw materials and mechanical tests in the dry and burnt proof bodies preceding a mixture experiment planning with the use of the response surface methodology, in order to get the best raw materials combinations to produce a ceramic mass with specific properties. The twelve ceramic masses studied in this work were prepared by the via dry process, characterized, shaped by uniaxial pressing and sinterized in the temperatures of 940ºC, 1000ºC, 1060ºC, 1120ºC and 1180ºC, using a fast burning cycle. The crystalline phases formed during the sintering in the temperatures in study have revealed the presence of anorthite and diopside beyond quartz with a remaining phase. These phases were the main responsible ones by the physical- mechanical properties of the sinterized proof bodies. The proof bodies after the sintering stage have presented water absorption higher than 10% and a good dimensional stability in all studied temperatures. However, the flexural breaking strength results in the temperatures of 940ºC, 1000ºC and 1060ºC, under the temperature zone of the vitrification of ceramic whiteware do not reach the flexural breaking strength specific for the porous wall tile (15 MPa), but in the temperature of 1120ºC next to the vitrification temperature zone, some whiteware ceramic (formulations) has reached the specified value for the porous wall tile. The results of this work have showed that the studied raw materials have great importance for used in the production of porous wall tiles (BIII)

Effects of hot and cold smoking processes on organoleptic properties, yield and composition of matrinxa fillet

Foi avaliado o efeito do processo de defumação a quente (45-90ºC/5 horas) e a frio (27-45ºC/10 horas) nas propriedades organolépticas, no rendimento e na composição dos filés de matrinxã (Brycon cephalus). Não houve diferença significativa no rendimento de filés defumados e não-defumados. As perdas no processo de defumação foram significativamente maiores para defumação a quente (19,37%) em comparação à defumação a frio (17,08%). O processo de defumação reduziu a umidade (in natura = 72,91%; defumado a quente = 58,51%; e defumado a frio = 59,68%) e aumentou os teores de proteína bruta, lipídios e cinzas. Houve diferença significativa somente nos teores de proteína no defumado a quente (28,07%) e defumado a frio (27,14%). O processo a frio resultou em melhor aparência e cor de filé, enquanto o processo a quente melhorou o sabor, o teor de sal e a aparência geral. O aroma e a textura não diferiram significativamente entre os processos. O processo de defumação a quente melhora as propriedades organolépticas e os níveis de proteína do filé de matrinxã.

Bianisotropia uniaxial em estruturas irradiantes com multicamadas e supercondutores

This work presents a theoretical and numerical analysis of parameters of a rectangular microstrip antenna with bianisotropic substrate, and including simultaneously the superconducting patch. The full-wave Transverse Transmission Line - TTL method, is used to characterize these antennas. The bianisotropic substrate is characterized by the permittivity and permeability tensors, and the TTL gives the general equations of the electromagnetic fields of the antennas. The BCS theory and the two fluids model are applied to superconductors in these antennas with bianisotropic for first time. The inclusion of superconducting patch is made using the complex resistive boundary condition. The resonance complex frequency is then obtained. Are simulated some parameters of antennas in order to reduce the physical size, and increase the its bandwidth. The numerical results are presented through of graphs. The theoretical and computational analysis these works are precise and concise. Conclusions and suggestions for future works are presented