Uncertainty methods inactivation and inventory calculations

For a number of important nuclides, complete activation data libraries with covariance data will be produced, so that uncertainty propagation in fuel cycle codes (in this case ACAB,FISPIN, ...) can be developed and tested. Eventually, fuel inventory codes should be able to handle the complete set of uncertainty data, i.e. those of nuclear reactions (cross sections, etc.), radioactive decay and fission yield data. For this, capabilities will be developed both to produce covariance data and to propagate the uncertainties through the inventory calculations.

Generic competences in engineering field: a comparative study between Latin America and European Union

In this work, a comparison between the competences codes in the CDIÓs* curriculum, the ones defined for the Tunning Project and the International Project Management Association (IPMA) is made. The goal is to define the most appropriate competences codes for the engineering education in Latin America. The CDIO code is obtained from the engineering practice, and responds to the Accreditation Board for Engineering and Technology (ABET) standards of accreditation. The Tuning competences are the ones defined for Latin America and the IPMÁs are international competences for project management. It is the first time that the competences defined in ABET accreditation standards in the engineering field are compared with the international competences according to IPMÁs model. The results give evidence that, in first place, there is a need to apply holistic models in the definition of an engineering curriculum. Second, the pertinence of these models in the definition of engineering programs in Latin America.

Use of alternative fuels obtained from renewable sources in brayton cycles

Analysis and simulation of the behaviour of gas turbines for power generation using different nonconventional fuels obtained from different renewable sources are presented. Three biomass-tobiofuel processes are considered: anaerobic digestion of biomass (biogas), biomass gasification (synthesis gas) and alcoholic fermentation of biomass and dehydration (bioethanol), each of them with two different biomass substrates (energy crops and municipal solid waste) as input. The gas turbine behaviour in a Brayton cycle is simulated both in an isolated operation and in combined cycle. The differences in gas turbine performance when fired with the considered biofuels compared to natural gas are studied from different points of view related with the current complex energetic context: energetic and exergetic efficiency of the simple/combined cycle and CO2 emissions. Two different tools have been used for the simulations, each one with a different approach: while PATITUG (own software) analyses the behaviour of a generic gas turbine allowing a total variability of parameters, GT-PRO (commercial software) is more rigid, albeit more precise in the prediction of real gas turbine behaviour. Different potentially interesting configurations and its thermodynamic parameters have been simulated in order to obtain the optimal range for all of them and its variation for each fuel.

Estudio técnico y económico para la sustitución del gasóleo por biomasa térmica en edificios urbanos

La finalidad del proyecto consiste en realizar la sustitución de calderas de gasóleo por calderas de biomasa para suministrar calefacción a edificios urbanos. En primer lugar, se ha hecho un estudio de la demanda calorífica de los edificios, y posteriormente se ha estudiado el ciclo completo de la biomasa, incluyendo el suministro y tipo de biomasa, dimensiones de los equipos y espacios necesarios para la instalación. Después de estudiar la viabilidad técnica y económica, podemos concluir que utilizar biomasa en edificios con calderas centralizadas nos aporta un gran ahorro en comparación con el gasóleo, además de evitar emisiones de CO2 y utilizar un combustible renovable y de producción nacional. ABSTRACT The purpose of the project consists of performing the substitution of diesel boilers by biomass boilers to provide the heating to urban buildings. In first place, it has been made a study of the calorific demand of the buildings. In addition, it has been studied the completed cycle of the biomass even including the supply and the type of biomass, the dimensions of the machines and the necessary spaces to carry out the installation. After studying the technical and economical viability, we can conclude that using biomass in buildings with central boilers provides us an important saving in comparison with diesel as well as to avoid CO2 emissions and using a renewable combustible of national production.

Use of alternative fuels obtained from renowable sources in Brayton cycles

Analysis and simulation of the behaviour of gas turbines for power generation using different nonconventional fuels obtained from different renewable sources are presented. Three biomass-tobiofuel processes are considered: anaerobic digestion of biomass (biogas), biomass gasification (synthesis gas) and alcoholic fermentation of biomass and dehydration (bioethanol), each of them with two different biomass substrates (energy crops and municipal solid waste) as input. The gas turbine behaviour in a Brayton cycle is simulated both in an isolated operation and in combined cycle. The differences in gas turbine performance when fired with the considered biofuels compared to natural gas are studied from different points of view related with the current complex energetic context: energetic and exergetic efficiency of the simple/combined cycle and CO2 emissions. Two different tools have been used for the simulations, each one with a different approach: while PATITUG (own software) analyses the behaviour of a generic gas turbine allowing a total variability of parameters, GT-PRO (commercial software) is more rigid, albeit more precise in the prediction of real gas turbine behaviour. Different potentially interesting configurations and its thermodynamic parameters have been simulated in order to obtain the optimal range for all of them and its variation for each fuel.

Efficient management of available technologies. Aplication to mining operations for industry supplies

Nowadays, processing Industry Sector is going through a series of changes, including right management and reduction of environmental affections. Any productive process which looks for sustainable management is incomplete if Cycle of Life of mineral resources sustainability is not taken into account. Raw materials for manufacturing are provided by mineral resources extraction processes, such as copper, aluminum, iron, gold, silver, silicon, titanium? Those elements are necessary for Mankind development and are obtained from the Earth through mineral extractive processes. Mineral extraction processes are operations which must take care about the environmental consequences. Extraction of huge volumes of rock for their transformation into raw materials for industry must be optimized to reduce ecological cost of the final product as l was possible. Reducing the ecological balance on a global scale has no sense to design an efficient manufacturing in secondary industry (transformation), if in first steps of the supply chain (extraction) impact exceeds the savings of resources in successive phases. Mining operations size suggests that it is an environmental aggressive activity, but precisely because of its great impact must be the first element to be considered. That idea implies that a new concept born: Reduce economical and environmental cost This work aims to make a reflection on the parameters that can be modified to reduce the energy cost of the process without an increasing in operational costs and always ensuring the same production capacity. That means minimize economic and environmental cost at same time. An efficient design of mining operation which has taken into account that idea does not implies an increasing of the operating cost. To get this objective is necessary to think in global operation view to make that all departments involved have common guidelines which make you think in the optimization of global energy costs. Sometimes a single operational cost must be increased to reduce global cost. This work makes a review through different design parameters of surface mining setting some key performance indicators (KPIs) which are estimated from an efficient point of view. Those KPIs can be included by HQE Policies as global indicators. The new concept developed is that a new criteria has to be applied in company policies: improve management, improving OPERATIONAL efficiency. That means, that is better to use current resources properly (machinery, equipment,?) than to replace them with new things but not used correctly. As a conclusion, through an efficient management of current technologies in each extractive operation an important reduction of the energy can be achieved looking at downstream in the process. That implies a lower energetic cost in the whole cycle of life in manufactured product.

Analysis of the impact of globalization and economic growth on food security in developing countries

A pesar de los importantes avances en la reducción del hambre, la seguridad alimentaria continúa siendo un reto de dimensión internacional. La seguridad alimentaria es un concepto amplio y multidimensional, cuyo análisis abarca distintas escalas y horizontes temporales. Dada su complejidad, la identificación de las causas de la inseguridad alimentaria y la priorización de las medias para abordarlas, son dos cuestiones que suscitan un intenso debate en la actualidad. El objetivo de esta tesis es evaluar el impacto de la globalización y el crecimiento económico en la seguridad alimentaria en los países en desarrollo, desde una perspectiva macro y un horizonte temporal a largo plazo. La influencia de la globalización se aborda de una manera secuencial. En primer lugar, se analiza la relación entre la inversión público-privada en infraestructuras y las exportaciones agrarias. A continuación, se estudia el impacto de las exportaciones agrarias en los indicadores de seguridad alimentaria. El estudio del impacto del crecimiento económico aborda los cambios paralelos en la distribución de la renta, y cómo la inequidad influye en el comportamiento de la seguridad alimentaria nacional. Además, se analiza en qué medida el crecimiento económico contribuye a acelerar el proceso de mejora de la seguridad alimentaria. Con el fin de conseguir los objetivos mencionados, se llevan a cabo varios análisis econométricos basados en datos de panel, en el que se combinan datos de corte transversal de 52 países y datos temporales comprendidos en el periodo 1991-2012. Se analizan tanto variables en niveles como variables en tasas de cambio anual. Se aplican los modelos de estimación de efectos variables y efectos fijos, ambos en niveles y en primeras diferencias. La tesis incluye cuatro tipos de modelos econométricos, cada uno de ellos con sus correspondientes pruebas de robustez y especificaciones. Los resultados matizan la importancia de la globalización y el crecimiento económico como mecanismos de mejora de la seguridad alimentaria en los países en desarrollo. Se obtienen dos conclusiones relativas a la globalización. En primer lugar, los resultados sugieren que la promoción de las inversiones privadas en infraestructuras contribuye a aumentar las exportaciones agrarias. En segundo lugar, se observa que las exportaciones agrarias pueden tener un impacto negativo en los indicadores de seguridad alimentaria. La combinación de estas dos conclusiones sugiere que la apertura comercial y financiera no contribuye por sí misma a la mejora de la seguridad alimentaria en los países en desarrollo. La apertura internacional de los países en desarrollo ha de ir acompañada de políticas e inversiones que desarrollen sectores productivos de alto valor añadido, que fortalezcan la economía nacional y reduzcan su dependencia exterior. En relación al crecimiento económico, a pesar del incuestionable hecho de que el crecimiento económico es una condición necesaria para reducir los niveles de subnutrición, no es una condición suficiente. Se han identificado tres estrategias adicionales que han de acompañar al crecimiento económico con el fin de intensificar su impacto positivo sobre la subnutrición. Primero, es necesario que el crecimiento económico sea acompañado de una distribución más equitativa de los ingresos. Segundo, el crecimiento económico ha de reflejarse en un aumento de inversiones en salud, agua y saneamiento y educación. Se observa que, incluso en ausencia de crecimiento económico, mejoras en el acceso a agua potable contribuyen a reducir los niveles de población subnutrida. Tercero, el crecimiento económico sostenible en el largo plazo parece tener un mayor impacto positivo sobre la seguridad alimentaria que el crecimiento económico más volátil o inestable en el corto plazo. La estabilidad macroeconómica se identifica como una condición necesaria para alcanzar una mayor mejora en la seguridad alimentaria, incluso habiéndose mejorado la equidad en la distribución de los ingresos. Por último, la tesis encuentra que los países en desarrollo analizados han experimentado diferentes trayectorias no lineales en su proceso de mejora de sus niveles de subnutrición. Los resultados sugieren que un mayor nivel inicial de subnutrición y el crecimiento económico son responsables de una respuesta más rápida al reto de la mejora de la seguridad alimentaria. ABSTRACT Despite the significant reductions of hunger, food security still remains a global challenge. Food security is a wide concept that embraces multiple dimensions, and has spatial-temporal scales. Because of its complexity, the identification of the drivers underpinning food insecurity and the prioritization of measures to address them are a subject of intensive debate. This thesis attempts to assess the impact of globalization and economic growth on food security in developing countries with a macro level scale (country) and using a long-term approach. The influence of globalization is addressed in a sequential way. First, the impact of public-private investment in infrastructure on agricultural exports in developing countries is analyzed. Secondly, an assessment is conducted to determine the impact of agricultural exports on food security indicators. The impact of economic growth focuses on the parallel changes in income inequality and how the income distribution influences countries' food security performance. Furthermore, the thesis analyzes to what extent economic growth helps accelerating food security improvements. To address the above mentioned goals, various econometric models are formulated. Models use panel data procedures combining cross-sectional data of 52 countries and time series data from 1991 to 2012. Yearly data are expressed both in levels and in changes. The estimation models applied are random effects estimation and fixed effects estimations, both in levels and in first differences. The thesis includes four families of econometric models, each with its own set of robustness checks and specifications. The results qualify the relevance of globalization and economic growth as enabling mechanisms for improving food security in developing countries. Concerning globalization, two main conclusions can be drawn. First, results showed that enhancing foreign private investment in infrastructures contributes to increase agricultural exports. Second, agricultural exports appear to have a negative impact on national food security indicators. These two conclusions suggest that trade and financial openness per se do not contribute directly to improve food security in development countries. Both measures should be accompanied by investments and policies to support the development of national high value productive sectors, to strengthen the domestic economy and reduce its external dependency. Referring to economic growth, despite the unquestionable fact that income growth is a pre-requisite for reducing undernourishment, results suggest that it is a necessary but not a sufficient condition. Three additional strategies should accompany economic growth to intensifying its impact on food security. Firstly, it is necessary that income growth should be accompanied by a better distribution of income. Secondly, income growth needs to be followed by investments and policies in health, sanitation and education to improve food security. Even if economic growth falters, sustained improvements in the access to drinking water may still give rise to reductions in the percentage of undernourished people. And thirdly, long-term economic growth appears to have a greater impact on reducing hunger than growth regimes that combine periods of growth peaks followed by troughs. Macroeconomic stability is a necessary condition for accelerating food security. Finally, the thesis finds that the developing countries analyzed have experienced different non-linear paths toward improving food security. Results also show that a higher initial level of undernourishment and economic growth result in a faster response for improving food security.

Diseño de laboratorio para la evaluación de silenciadores "in situ"

Se ha realizado el diseño de un sistema que permite realizar ensayos de silenciadores “in situ”. Para evaluar el comportamiento del sistema de ensayo de silenciadores se procede a caracterizar los paneles acústicos que son la base del sistema. De los paneles empleados en el sistema, se determinará por diferencia del nivel de presión sonora, el aislamiento a ruido aéreo de los mismos, partiendo del promedio de las medidas obtenidas en la sala emisora de la cámara reverberante con el material instalado y en la sala receptora. Se realizan distintas medidas de los niveles de presión sonora en sala emisora de la cámara reverberante y en la receptora así como del tiempo de reverberación con los paneles instalados en el hueco existente en el elemento de separación vertical de la cámara. Una vez ensayados los paneles, se ha procedido a medir los niveles de presión sonora que se obtienen antes y después de la interposición de distintos silenciadores en el sistema diseñado con el propósito de disponer de un laboratorio de medida de la atenuación de silenciadores. Para ello, se procede a efectuar el montaje, en la puerta sencilla de la cámara reverberante, de los componentes del sistema diseñado y se realizan mediciones de la atenuación que proporciona la colocación de un silenciador en el sistema y su posterior sustitución por un conducto. La medición de la atenuación del nivel de presión sonora que producen los distintos silenciadores se realiza por pérdidas por inserción, siguiendo las directrices de la Norma UNE-ISO 11820 y por el método de conductos forrados como cálculo teórico. ABSTRACT. A system has been designed for testing silencers “in situ”. In first place, to evaluate the behavior of the system in the test of silencers, it has been proceeded to customize the acoustic panels that are the basis of the system. The attenuation sound of the panels used in the system will be determined by the difference of sound pressure level. It will be made through the average of the measurements obtained in the source room of the reverberant chamber, the average of the measurements obtained in the receiving room, as well as the reverberation time, with the material installed in the hole of the walls. Once the panels are tested, and with the purpose of having a laboratory to measure the attenuation of silencers, the sound pressure levels has been measured before and after inserting the different silencers in the designed system. To obtain these measures, the components of the system designed have been installed in the hollow of the single door of the reverberant chamber and then the sound pressure level has been measured with a silencers first and after with a duct instead of the silencer. The measurement of the attenuation of the sound pressure level produced by different silencers has been made by insertion loss, following the 11820 UNE-ISO, as well as theoretical calculation has been made by the method of duct lined.

Physics of Vibrating Airfoils at Low Reduced Frequency

The unsteady aerodynamics of low pressure turbine vibrating airfoils in flap mode is studied in detail using a frequency domain linearized Navier-Stokes solver. Both the travelling-wave and influence coefficient formulations of the problem are used to highlight key aspects of the physics and understand different trends such as the effect of reduced frequency and Mach number. The study is focused in the low-reduced frequency regime which is of paramount relevance for the design of aeronautical low-pressure turbines and compressors. It is concluded that the effect of the Mach number on the unsteady pressure phase can be neglected in first approximation and that the unsteadiness of the vibrating and adjacent airfoils is driven by vortex shedding mechanisms. Finally a simple model to estimate the work-per-cycle as a function of the reduced frequency and Mach Number is provided. The edge-wise and torsion modes are presented in less detail but it is shown that acoustic waves are essential to explain its behaviour. The non-dimensional work-per-cycle of the edge-wise mode shows a large dependence with the Mach number while in the torsion mode a large number of airfoils is needed to reconstruct the work-per-cycle departing from the influence coefficients.

Life cycle assessment of concentrated solar power (CSP) and the influence of hybridising with natural gas

Purpose Concentrating Solar Power (CSP) plants based on parabolic troughs utilize auxiliary fuels (usually natural gas) to facilitate start-up operations, avoid freezing of HTF and increase power output. This practice has a significant effect on the environmental performance of the technology. The aim of this paper is to quantify the sustainability of CSP and to analyse how this is affected by hybridisation with different natural gas (NG) inputs. Methods A complete Life Cycle (LC) inventory was gathered for a commercial wet-cooled 50 MWe CSP plant based on parabolic troughs. A sensitivity analysis was conducted to evaluate the environmental performance of the plant operating with different NG inputs (between 0 and 35% of gross electricity generation). ReCiPe Europe (H) was used as LCA methodology. CML 2 baseline 2000 World and ReCiPe Europe E were used for comparative purposes. Cumulative Energy Demands (CED) and Energy Payback Times (EPT) were also determined for each scenario. Results and discussion Operation of CSP using solar energy only produced the following environmental profile: climate change 26.6 kg CO2 eq/KWh, human toxicity 13.1 kg 1,4-DB eq/KWh, marine ecotoxicity 276 g 1,4-DB eq/KWh, natural land transformation 0.005 m2/KWh, eutrophication 10.1 g P eq/KWh, acidification 166 g SO2 eq/KWh. Most of these impacts are associated with extraction of raw materials and manufacturing of plant components. The utilization NG transformed the environmental profile of the technology, placing increasing weight on impacts related to its operation and maintenance. Significantly higher impacts were observed on categories like climate change (311 kg CO2 eq/MWh when using 35 % NG), natural land transformation, terrestrial acidification and fossil depletion. Despite its fossil nature, the use of NG had a beneficial effect on other impact categories (human and marine toxicity, freshwater eutrophication and natural land transformation) due to the higher electricity output achieved. The overall environmental performance of CSP significantly deteriorated with the use of NG (single score 3.52 pt in solar only operation compared to 36.1 pt when using 35 % NG). Other sustainability parameters like EPT and CED also increased substantially as a result of higher NG inputs. Quasilinear second-degree polynomial relationships were calculated between various environmental performance parameters and NG contributions. Conclusions Energy input from auxiliary NG determines the environmental profile of the CSP plant. Aggregated analysis shows a deleterious effect on the overall environmental performance of the technology as a result of NG utilization. This is due primarily to higher impacts on environmental categories like climate change, natural land transformation, fossil fuel depletion and terrestrial acidification. NG may be used in a more sustainable and cost-effective manner in combined cycle power plants, which achieve higher energy conversion efficiencies.

Diseño de una estrategia para la definición de proyectos a partir de la vigilancia tecnológica: aplicación a las interfaces naturales

A la hora de afrontar un proyecto de investigación, no basta con una vigilancia tradicional del entorno. Ya que debido a lo cambiante del mundo, a la globalización, a lo rápido que se desarrollan nuevas tecnologías y productos es preciso realizar un proceso sistemático que permita a las organizaciones o empresas anticiparse a los cambios tecnológicos. En este contexto, el diseño de metodologías basadas en la Vigilancia Tecnológica (VT) permite gestionar la actividad innovadora de organizaciones o empresas facilitando el proceso de generación de ideas para el desarrollo de productos o servicios. Es por ello que en este Proyecto de Fin de Grado se ha diseñado una estrategia para aplicar metodologías de Vigilancia Tecnológica aplicadas a un proyecto de I+D que estudia las Interfaces Naturales de Usuario (NUI). Para ello se ha partido de la metodología de trabajo basada en el proceso de Vigilancia Tecnológica e Inteligencia Competitiva del proyecto CETISME, identificando claramente cada una de las fases que lo componen: identificación de objetivos, selección de las fuentes de información, búsqueda y almacenamiento de la información, análisis de la información y por último validación de la información que concluye con la creación de informes de Vigilancia Tecnológica. Por lo tanto, para cada una de las fases que componen lo que comúnmente se llama el ciclo de la vigilancia, se ha explicado en primer lugar en qué consisten, que estrategias a seguir son las más adecuadas así como la manera de llevarlas a cabo, y por último, si fuera necesario, qué herramientas (desde bases de datos a software) son necesarias o son de utilidad para llevar a cabo el proceso y optimizarlo. De esta manera, como se verá a lo largo de este documento, la aplicación de dicha metodología permitirá a las organizaciones o empresas obtener situaciones ventajosas a la hora de innovar, captar oportunidades o detectar amenazas, identificar competidores o alianzas potenciales, entre otros. ABSTRACT. When taking over a research project, a traditional surveillance of the environment is not enough. Mainly due to the changing the world, to the globalization, to how fast new technologies and products are developed, is necessary to make a systematic process that enables organizations or companies anticipate to technological changes. In this context, the design of methodologies based on the Technology Watch (TW) allows managing the innovative activity of organizations or companies facilitating the process of generating ideas for products or services development. For this reason, in this Thesis a strategy for applying Technological Watch methodologies applied to a R&D project studying Natural User Interfaces (NUI) has been designed. To achieve this goal, the starting point was the CETISME project methodologies, which are based on the Technology Watch and the Competitive Intelligence process, clearly identifying each of the phases that compose it: identification of objectives, selection of the information sources, storage, search and analysis of the information, and finally validating the information that concludes with the creation of Technological Watch reports. Therefore, for each of the phases composing what is commonly known as the monitoring cycle, it has been explained in first place what they consist of, what strategies are more adequate as well as how they should be implemented, and finally, if necessary, what tools (from databases to software) are needed or are useful for managing the process and optimize it. Thus, as discussed throughout this document, the application of said methodology will allow organizations or companies to obtain advantageous situations when it comes to innovate, catch opportunities or detect threats, to identify competitors or potential alliances, among others.

New systems of management to improve the health and welfare of rabbits in farm conditions = Nuevos sistemas de cría y manejo para mejorar la salud y bienestar de conejos de granja

El objetivo general de esta Tesis Doctoral fue evaluar nuevos sistemas de alojamiento y cría de conejos de granja, estudiando tanto parámetros comportamentales (experimento 1) como productivos y reproductivos (experimento 3). Además, se evaluaron diferentes técnicas de muestreo con el fin de optimizar el tiempo empleado para el estudio del comportamiento animal (experimento 2). En el experimento 1, se estudió el comportamiento de conejas alojadas en dos tipos de jaulas (TJ), convencionales vs. alternativas con una plataforma elevada, en distintos estados fisiológicos (EF), lactantes y gestantes. Se observó el comportamiento de 12 conejas reproductoras con grabaciones de una duración de 24 h continuas. Independientemente del EF y TJ, las conejas pasaron gran parte de su tiempo sobre el reposapatas (57,7 %, de media). Sin embargo, debido al uso de la plataforma (23,0% del tiempo, de media), las conejas lactantes permanecieron un 36,6 % menos de tiempo (P<0,001) sobre el reposapatas y las gestantes un 27,0% menos (P<0,001) sobre el enrejillado en jaulas alternativas que en convencionales. En las jaulas alternativas, las conejas podían adoptar la postura “levantada”, sin embargo ésta fue observada solamente en conejas gestantes una media de 4,6 veces al día. Las conejas bebieron con mas frecuencia en jaulas convencionales que en alternativas (24,6 vs 19,1 veces al día; P<0,05). Se observó una mayor duración y frecuencia del comportamiento “interactuando con compañeras” en conejas gestantes alojadas en jaulas convencionales (276 s/d y 4,6 veces/d; P<0,05). La frecuencia de “interactuando con gazapos” fue menor en jaulas alternativas que en convencionales (2,4 vs 8,6 veces al día; P<0,01). La hora del día afectó al comportamiento de las conejas, teniendo un comportamiento menos activo durante las horas centrales del día. Durante las horas de oscuridad, las conejas estuvieron más inquietas realizando comportamientos como ‘encabritarse’ o amamantar, coincidiendo éstos en el tiempo en el cual las conejas pasaron más tiempo en la plataforma. Las conejas utilizaron frecuentemente la plataforma, independientemente del estado fisiológico. En la fase de lactación, las conejas utilizaron la plataforma para huir de los intentos de mamar por parte de los gazapos cuando éstas no estaban receptivas. El uso de la plataforma puede dar lugar a problemas higiénicos debidos tanto por la acumulación de heces sobre ella como por la caída de heces y orina sobre los animales que están en la parte inferior. La ausencia de estereotipias por parte de las conejas tanto en jaulas alternativas como en convencionales no sugiere una falta de bienestar debida al sistema de alojamiento. En el experimento 2, se compararon distintos métodos de observación simplificada con respecto un método de referencia usando grabaciones continuas de 24 h para la evaluación del comportamiento de conejas en distintos estados fisiológicos (gestantes y lactantes) alojadas en dos tipos de jaulas (convencionales y alternativas). Se analizaron un total de 576 h de grabaciones continuas de 24 h en 12 conejas reproductoras al final del periodo de lactación y en las mismas conejas después del destete. Los comportamientos observados se clasificaron en tres categorías independientes (localización en la jaula, postura y comportamientos funcionales). Se utilizaron grabaciones continuas de 24 h como método de referencia para validar otros cuatro métodos de observación simplificados, utilizando grabaciones de distinta duración y frecuencia a lo largo del día. Métodos regulares: corto y largo con 2.4 y 8 h de observación respectivamente, y métodos irregulares: corto y largo con 6 y 8 h de observación, respectivamente. Como resultado, se observó que independientemente del sistema de alojamiento, el mejor método para reducir el tiempo de observación necesario para evaluar el comportamiento de conejas reproductoras depende del tipo de variable a estudiar y del estado fisiológico de las conejas. En gestantes, los métodos irregulares no fueron adecuados para estimar comportamientos de larga duración tales como tumbada, sentada, descansando y acicalándose. Sin embargo, en ambos estados fisiológicos, los métodos regulares fueron precisos para los comportamientos de los grupos localización y postura y para comportamientos funcionales de larga duración. Por otro lado, los coeficientes de variación de los comportamientos poco frecuentes realizados principalmente durante el periodo de oscuridad fueron muy altos, y el método irregular largo obtuvo los menores errores de estimación para éstos comportamientos. En el experimento 3, se estudió el efecto de un uso combinado de lactaciones largas (hasta 46 días) con jaulas alternativas sobre los parámetros productivos y reproductivos de 104 conejas y sus camadas durante cinco ciclos reproductivos. La mitad de las conejas fueron alojadas en jaulas polivalentes convencionales (39 cm x 100 cm x 30 cm) y la otra mitad en jaulas polivalentes alternativas (39 cm x 100 cm x 60 cm), con una plataforma elevada. Dentro de cada grupo de alojamiento, la mitad de las conejas se destetaron a 32 días y la otra mitad a 46 días tras el parto. Las lactaciones más largas afectaron negativamente al peso (P<0,001), contenido en grasa y energía (P<0,05) de las conejas al final del periodo de lactación, pero éste efecto disminuyó con el número de partos. La fertilidad, prolificidad y la mortalidad de las conejas no fue afectada por la duración de la lactación. El destete tardío dio lugar a un mayor tamaño y peso de la camada al final del periodo de crecimiento (8,9 y 11,3 %, respectivamente) y a un menor índice de conversión por jaula durante el todo el periodo experimental (13,5 %) con respecto al destete convencional (P<0,001). Éstos resultados fueron paralelos a la menor mortalidad global (12,6 vs 17,6 %; P<0,05) observada en gazapos con destete tardío. Las diferencias en los parámetros productivos con las distintas edades al destete sólo fueron observadas en los ciclos con peor estado sanitario (tercer y quinto ciclo), en los cuales el destete tardío redujo la mortalidad. El tipo de jaula no afectó al peso de la coneja, condición corporal, mortalidad, fertilidad ni tamaño de camada durante los cinco primeros ciclos reproductivos. Sin embargo, el peso de la camada y el índice de conversión a los 21 días de edad fueron 4,2% mayor (P<0,001) y 5,0% menor (P<0,005) en animales alojados en jaulas alternativas que en jaulas convencionales. A día 59 las jaulas alternativas dieron lugar a camadas más pesadas (P<0,01); sin embargo, éste efecto fue influenciado por la densidad alcanzada en cada ciclo, ya que cuando la densidad de los animales fue menor que 40kg/m2 (tercer y quinto ciclo), el efecto del tipo de jaula sobre el peso de la camada no fue significativo. De los resultados obtenidos se puede concluir que el uso combinado de lactaciones más largas y jaulas con mayor superficie disponible con una plataforma elevada podría ser una alternativa para mejorar el bienestar animal en determinadas situaciones productivas. ABSTRACT The general aim of this PhD Thesis was to evaluate new housing and husbandry systems of farmed rabbits, studying behavioral (experiment 1), productive and reproductive (experiment 3) parameters. Moreover, different sampling techniques were evaluated in order to optimize the assessment of rabbit behaviour (experiment 2). In experiment 1, the behaviour of rabbit does housed in two different types of cage (TC), conventional vs. alternative with an elevated platform, at different physiological stages (PS), lactation and gestation was to study. Behavioural observations were carried out on 12 commercial rabbit does using continuous 24 hour video recording. Independently of PS and TC, rabbit does spent most of their time on foot mats (57.7 %, as average). However, due to the use of platforms (23.0% of time, as average), lactating does spent 36.6% less time (P<0.001) on foot mats and gestating does spent 27.0% less (P<0.001) time on wire mesh in alternative cages than in conventional cages. Alternative cages allowed for standing posture but this behaviour was only observed in gestating does (4.6 times a day, as average). Frequency of drinking was higher in conventional than in alternative cages (24.6 vs. 19.1 times a day; P<0.05). Gestating does housed in conventional cages reached the highest duration and frequency of interacting with neighbours (276 s/d and 4.6 times/d; P<0.05). The frequency of interacting with kits was lower in alternative than in conventional cages (2.4 vs. 8.6 times a day; P<0.01). Does’ behaviour was influenced by hour of day, being less active at the midday hours. During dark hours rabbit does more frequently performed restless behaviour such as hyperactivity or nursing, matching the time at which rabbit does spent more time on the platform. The platform was frequently used by rabbit does, independent of their physiological state, and during late lactation phase, when mothers were not receptive to nursing, does housed in alternative cages used the platform as a mean to flee from kids trying to suckle. The use of the platform might lead to hygienic problems due to retained faeces on the platform and faeces and urine falling onto animals located in the lower part of the cage. Stereotypies were not observed in any housing system, therefore conventional cages do not suggest lack of animal welfare. In experiment 2, it was compared the results of different simplified sampling methods of behavioural data with respect to reference records of 24-h in order to assess rabbit does behaviours at different physiological stages (gestation and lactation) in animals housed in two types of cages (conventional and alternative). A total of 576 h of continuous video of 12 rabbit does at the end of lactation and on the same females after weaning were analysed. The behavioural observations were studied using three independent categories of classification (location in the cage, posture and functional behaviours). Continuous behavioural recordings of 24 h were considered as the reference method to validate another 4 sampling methods of data collection by aggregated video recordings of different frequency and duration (regular short and long methods with 2.4 and 8 h of observation respectively, and irregular short and long methods with 6 and 8 h of observation, respectively). The current results showed that, independently of housing system, the best method to reduce the total observation time required to assess rabbit does behaviour depends on the trait studied and physiological stage of does. In gestating does, irregular methods were not suitable to estimate behaviours of long duration such as lying, sitting, resting and grooming. However, in both physiological stages, regular methods were accurate for location behaviours, postures and functional behaviours of long duration. Instead, for the study of infrequent behaviours performed mainly during dark period, where coefficients of variation were high, the irregular long method led to the lowest mean estimation errors. In experiment 3, the effects of the combined use of long lactation periods (46 days) with alternative cages on the reproductive and growth performance of 104 rabbit does and their litters during five consecutive reproductive cycles were studied. Half of does were housed in conventional polyvalent cages (39 cm x 100 cm x 30 cm) and the other half in alternative polyvalent cages (39 cm x 100 cm x 60 cm), with a raised platform. Half of the rabbit does in each type of cages were weaned at 32 and the other half at 46 days after parturition. Longer lactations affected negatively to body weight (P<0.001), fat and energy content (P<0.05) of rabbit does at the end of the lactation period, but this effect decreased with the number of parturitions. Fertility, prolificacy and doe mortality were not affected by lactation length. Late weaning led to higher litter size (by 8.9 %) and litter weight (by 11.3 %) at the end of growing period and lower feed conversion ratio per cage during the overall experimental period (13.5 %) than standard weaning (P<0.001). These results were parallels to a lower mortality (12.6 vs 17.6 %; P<0.05) of young rabbit weaned later during the overall experimental period. Differences in performances at different weaning ages were only observed during cycles with worst health status (third and fifth cycles) in which late weaning decreased mortality. Type of cage did not affect doe body weight and body condition, mortality, fertility, prolificacy and litter size during the five firsts reproductive cycles. Nevertheless, at day 21 litter weight and feed conversion ratio were 4.2 % higher (P<0.001) and 5.0 % lower (P<0.005) in animals housed in alternative than in conventional cages. Alternative cages also led to heavier litters at 59 days (P<0.01); however, this effect was influenced by density reached in each cycle, as when the density of animals was lower than 40 kg/m2 (cycles three and five), the difference of litter weight between alternative and conventional cages was not significant. From the results obtained it can be concluded that the combined use of longer lactations and cages with higher available surface with a raised platform could be an alternative to improve animal welfare in some productive situations.

Evaluación de Ulmus pumila L. y Populus spp. como cultivos energéticos en corta rotación

El presente trabajo estudia el empleo del olmo de Siberia (Ulmus Pumila L.) y el chopo (Populus spp.) en corta rotación y alta densidad para la producción de biomasa con fines energéticos. En el área mediterránea las disponibilidades hídricas son limitadas, por lo que la mayoría de los cultivos energéticos utilizados hasta el momento requieren el aporte de agua de riego; por ello resulta fundamental encontrar especies con bajos requerimientos hídricos, analizar la eficiencia en el uso del agua de diferentes materiales genéticos y optimizar la dosis de riego. Las parcelas experimentales se ubicaron en la provincia de Soria. En el ensayo llevado a cabo con olmo de Siberia se ha analizado el efecto en la producción de la disponibilidad de agua mediante el establecimiento de parcelas en secano y con dos dosis de riego (2000 m3 ha-1 año-1 y 4000 m3 ha-1 año-1 aproximadamente); además, al ser una especie poco estudiada hasta el momento, se ha estudiado también el efecto que tiene sobre el rendimiento la densidad de plantación (3.333 plantas ha-1 y 6.666 plantas ha-1), el tipo de suelo (2 calidades diferentes) y el turno de corta (3 y 4 años). En el caso del chopo, se han evaluado cuatro clones (AF-2, I-214, Monviso y Pegaso) establecidos con una densidad de 20.000 plantas por hectárea. Durante el primer ciclo de tres años se aportó el mismo volumen de riego a todas las parcelas, mientras que durante el segundo ciclo se establecieron 8 regímenes hídricos diferentes. Por otra parte, se ha investigado sobre el uso del potencial hídrico de las plantas para evaluar el estrés hídrico de las mismas y se ha estimado la producción de biomasa foliar y el Índice de Área Foliar (LAI) de ambas especies, relacionando los valores obtenidos con la dosis de riego y la producción de biomasa. Los resultados muestran que los suelos inundados reducen la tasa de supervivencia de los olmos durante el periodo de implantación, sin embargo la mortalidad durante los siguientes periodos vegetativos es baja y muestra buena capacidad de rebrote. La productividad (kg ha-1 año-1) obtenida fue mayor con un turno de corta de cuatro años que con turno de tres años. El área basal y la altura fueron variables eficaces para predecir la producción de biomasa del olmo de Siberia, obteniendo una variabilidad explicada de más del 80%. En cuanto a los parámetros que mayor influencia tuvieron sobre el crecimiento, el tipo de suelo resulto ser el más relevante, obteniéndose en un suelo agrícola considerado de buena calidad una producción en condiciones de secano de unos 8.000 kg ha-1 año-1. En condiciones de regadío el rendimiento del olmo de Siberia fue al menos el doble que en secano, pero la diferencia entre las dos dosis de riego estudiadas fue pequeña. La producción de biomasa fue mayor en la densidad de plantación más alta (6.666 plantas ha–1) en las parcelas de regadío, sin embargo no se encontraron diferencias significativas entre las dos densidades en secano. El clon de chopo que presentó un mayor rendimiento durante el primer ciclo fue AF-2, alcanzando los 14.000 kg ha-1 año-1, sin embargo la producción de este clon bajó sustancialmente durante el segundo ciclo debido a su mala capacidad de rebrote, pasando a ser I-214 el clon más productivo llegando también a los 14.000 kg ha-1 año-1. Un aporte adicional de agua proporcionó un incremento de la biomasa recogida, pero a partir de unos 6.500 m3 ha-1 año-1 de agua la producción se mantiene constante. El potencial hídrico foliar ha resultado ser una herramienta útil para conocer el estrés hídrico de las plantas. Los olmos de regadío apenas sufrieron estrés hídrico, mientras que los implantados en condiciones de secano padecieron un acusado estrés durante buena parte del periodo vegetativo, que se acentuó en la parte final del mismo. Los chopos regados con las dosis más altas no sufrieron estrés hídrico o fue muy pequeño, en las dosis intermedias sufrieron un estrés moderado ocasionalmente y únicamente en las dosis más bajas sufrieron puntualmente un estrés severo. El LAI aumenta con la edad de los brotes y oscila entre 2 y 4 m2 m−2 en los chopos y entre 2 y 7 m2 m−2 en los olmos. Se encontró una buena relación entre este índice y la producción de biomasa del olmo de Siberia. En general, puede decirse que el olmo de Siberia podría ser una buena alternativa para producir biomasa leñosa en condiciones de secano, mientras que el chopo podría emplearse en regadío siempre que se haga una buena elección del clon y de la dosis de riego. ABSTRACT This work explores the possibilities of biomass production, for energy purposes, of Siberian elm (Ulmus Pumila L.) and poplar (Populus spp.) in Spain. Irrigation is required for the viable cultivation of many energy crops in Mediterranean areas because of low water availability, for this reason species with low water requirements should be a good alternative for biomass production. Moreover, the optimal amount of irrigation water and the performance of the different genetic material in terms of production and water use efficiency should be studied in order to use water wisely. The experimental plots were established in the province of Soria in Spain. Given the small amount of information available about Siberian elm, besides studying the influence of water availability (rain-fed and two different irrigation doses) on biomass production, two different plantation densities (3,333 plants ha-1 and 6,666 plants ha-1), two different soil type and two cutting cycles (three years and four years) were assessed. In the case of poplar, four clones belonging to different hybrids (I-214, AF2, Pegaso, and Monviso) were included in a high density plantation (20,000 plants ha-1). During the first cycle, the water supplied in all plots was the same, while 8 different watering regimes were used during the second cycle. The suitability of the use of the leaf water potential to assess the water stress situations has also been investigated. Moreover, leaf biomass production and leaf area index (LAI) were estimated in both species in order to analyze the relationship between these parameters, irrigation dose and biomass production. The results shows that flooded soils have an adverse effect on elm survival in the implantation period, but the percentage of mortality is very low during the following vegetative periods and it shows a good ability of regrowth. The annual yield from a four-year cutting cycle was significantly greater than that from the three-year cutting cycle. Basal diameter and height are effective variables for predicting the production of total biomass; equations with R squared higher than 80% were obtained. The analysis of parameters having an influence on elm growth shows that soil type is the most important factor to obtain a good yield. In soils with enough nutrients and higher waterholding capacity, biomass productions of 8,000 kg ha-1 yr-1 were achieved even under rain-fed conditions. In irrigated plots, Siberian elm production was double than the production of biomass under rain-fed conditions; however, small differences were obtained between the 2 different irrigation doses under study. Biomass yield was greater for the highest planting density (6,666 plants ha–1) in irrigated plots, but significant differences were not found between the 2 densities in rain-fed plots. The clone AF-2 showed the highest production (14,000 kg ha-1 yr-1) during the first cycle, however during the second cycle its growth was lower because of a high mortality rate after regrowth and I-214 achieves the greatest production (14,000 kg ha-1 yr-1). An additional water supply provided a greater amount of biomass, but over about 6500 m3 ha-1 yr-1 of water the production is constant. Leaf water potential has been shown to be a useful tool for finding out plant water status. Irrigated elms hardly suffered water stress, while rain-fed elms suffered a pronounced water stress, which was more marked at the end of the vegetative period. Most of poplars did not show water stress; leaf water potentials only showed an important water stress in the plots irrigated with the lowest doses. LAI increases with shoot age and it ranges from 2 to 4 m2 m−2 in poplars and from 2 to 7 m2 m−2 in elms. A good relationship has been found between this index and Siberian elm production. In general, Siberian elm could be a good alternative to produce woody biomass in rainfed plots, while poplar could be used in irrigated plots if a suitable clone and irrigation dose are chosen.