Regular and Platform Switching: Bone Stress Analysis Varying Implant Type

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the type of dental trauma on the pulp vitality and the time elapsed until treatment: a study in patients aged 0-3 years

The purpose of the present study was to determine the influence of the type of trauma on the pulp vitality and the time elapsed until seeking dental care in children aged 0-3 years seen at the Baby Clinic of the Aracatuba Dental School, UNESP. A total of 1813 records were analyzed. Two hundred and three patients, corresponding to 302 traumatized teeth, were assessed clinically and radiographically. Hard-tissue injuries were the most frequent (52%), with a predominance of enamel crown fractures (41.4%), followed by concussions (12.6%) and intrusions (11.6%). Clinical and radiographic examination revealed that 72% of the traumatized teeth maintained pulp vitality. In the case of supporting-tissue lesions, 51.1% of the patients sought care within 1-15 days after injury, while in the case of hard-tissue injuries, 52.7% sought care only after 16 days. The results showed that supporting-tissue injuries had a significant influence on the faster seeking of dental care.

Influence of sample type and collection method on Streptococcus mutans and Lactobacillus spp. counts in the oral cavity

Objectives: This study compared three methods of Streptococcus mutans and Lactobacillus spp. detection in the oral cavity: saliva swab (SS)-sample of stimulated saliva collected with swab; whole saliva (WS)-sample of 2 ml of stimulated saliva; and the dental plaque method (DP)-plaque sample of all dental surfaces.Methods: Thirty children were included in this study. In the first 15 children, the SS and WS methods were carried out before the dental plaque collection, and in the following 15, the sequence was inverted to evaluate possible interference of the methods sequence. The samples were diluted and inoculated in SB20 and Rogosa agar, respectively for S. mutans and Lactobacillus spp., at 37 degrees C for 48 h.Results: the results (cfu/mL) of S. mutans were analysed by the statistical Friedman's test. The levels of Lactobacillus spp. were analysed by descriptive statistics due to the high proportion of zero counts in the culture. In the first sequence of methods, the number of S. mutans counted for the SS method was inferior to DP and WS (P < 0.05), and the results for the WS and DP methods were similar. The detection of Lactobacillus spp. was observed just by the WS (100 %) and SS (14.3 %) methods. However, in the second experimental set the number of S. mutans detected by the DP method was similar to those of the SS and WS, however, the WS method showed higher values than SS (P < 0.05). A greater number of Lactobacillus spp. was detected by the WS method (100 %), followed by SS (55.5 %) and DP (33.3 %).Conclusions: the dental plaque collection and the sample of stimulated whole saliva presented similar results in the S. mutans count. The most suitable method to detect the Lactobacillus spp. level in the oral cavity is the stimulated whole saliva method. (c) 2004 Elsevier Ltd. All rights reserved.

Mandibular Angle Fracture Treated With New Three-Dimensional Grid Miniplate

Fractures of the mandibular angle deserve particular attention because they represent the highest percentage of mandibular fractures and have the highest postsurgical complication rate, making them the most challenging and unpredictable mandibular fractures to treat. Despite the evolution in the treatment of maxillofacial trauma and fixation methods, no single treatment modality has been revealed to be ideal for mandibular angle fractures. Several methods of internal fixation have been studied with great variation in complications rates, especially postoperative infections. Recently, new studies have shown reduction of postsurgical complications rates using three-dimensional plates to treat mandibular angle fractures. Nevertheless, only few surgeons have used this type of plate for the treatment of mandibular angle fractures. The aim of this clinical report was to describe a case of a patient with a mandibular angle fracture treated by an intraoral approach and a three-dimensional rectangular grid miniplate with 4 holes, which was stabilized with monocortical screws. The authors show a follow-up of 8 months, without infection and with occlusal stability.

The Short-Term Effectiveness of Non-Surgical Treatment in Reducing Levels of Interleukin-1 beta and Proteases in Gingival Crevicular Fluid From Patients With Type 2 Diabetes Mellitus and Chronic Periodontitis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of periodontal treatment on metabolic control, systemic inflammation and cytokines in patients with type 2 diabetes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fatigue strength: effect of welding type and joint design executed in Ti-6Al-4V structures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Clinical microscopic analysis of protaper retreatment system efficacy considering root canal thirds using three endodontic sealers

To evaluate the efficacy of ProTaper Universal rotary retreatment system and the influence of sealer type on the presence of filling debris in the reinstrumented canals viewed in an operative clinical microscope. Forty-five palatal root canals of first molars were filled with gutta-percha and one of the following sealers: G1, EndoFill; G2, AH Plus; G3, Sealapex. The canals were then reinstrumented with ProTaper Universal rotary system. Roots were longitudinally sectioned and examined under an operative clinical microscope (10x), and the amount of filling debris on canal walls was analyzed using the AutoCAD 2004 software. A single operator used a specific software tool to outline the canal area and the filling debris area in each third (cervical, middle, and apical), as well as the total canal area. Data were analyzed by Kruskal-Wallis test and Tukey test at P < 0.05. Sealapex demonstrated significant differences in the average of filling debris area/canal among the 3 thirds. This group revealed that apical third showed more debris than the both cervical and middle third (P < 0.0001). Endofill presented significantly more filling debris than Sealapex in the cervical third (P < 0.05). In the middle (P = 0.12) and apical third (P = 0.10), there were no differences amongst groups. Debris was left in all canal thirds, regardless of the retreatment technique. The greatest differences between techniques and sealers were found in the cervical third. Microsc. Res. Tech. 75:12331236, 2012. (C) 2012 Wiley Periodicals, Inc.

Caracterização estrutural do fator de crescimento de fibroblasto-10 (FGF-10) e seu papel na fisiologia folicular ovariana

Background: Interest in folliculogenesis has grown extensively in recent years. Nevertheless, several aspects of follicular activity are still poorly understood. Thus, in vitro culture of ovarian follicles using new substances has been established as a very viable model, enhancing the prospects for a better understanding of follicular activity. Among the family members of the fibroblast growth factor (FGFs), FGF-10 has received recent attention for its ability to regulate the development of ovarian follicles and oocyte maturation. Given the relevance of FGF-10 in the folliculogenesis process, this review aimed to describe the structural features, expression and the main biological effects of FGF-10 on the development of ovarian follicles in mammals.Review: Along this work, it was shown aspects related to structural characterization of FGF-10 and its receptors, as well as FGF-10 expression in different cell types, emphasizing its importance to follicular development. FGF-10 is a paracrine member of the family of FGFs, and is characterized by promoting biological responses via cell surface receptors (FGFRs) of tyrosine kinase-type. of these receptors, FGFR-1, FGFR-2 and FGFR-3 may undergo alternative transcriptional arrangements, enabling the formation of two isoforms (b and c) that have varying degrees of affinity for the various FGFs. Thus, seven FGFR proteins (FGFRs 1b, 1c, 2b, 2c, 3b, 3c and 4) with different binding specificities are generated from the four FGFR genes. The FGFRs transmit intracellular signals after binding with the ligand through the phosphorylation of tyrosine, which activates various transduction patterns in the cytoplasm. The signal transduction of FGF-10 may occur through three main pathways: protein of rat sarcoma (Ras)/MAPK, PLC gamma/Ca(2+) and phosphatidylinositol-3 kinase (PI3K)/protein kinase B (Akt), which are involved in the transmission of biological signals, leading to cellular proliferation and differentiation. FGF-10 mRNA expression was detected in the ovarian stroma, oocyte and theca cells of preantral and antral follicles. on the other hand, the expression of mRNA for FGF-10 receptors was found in, granulosa cells, theca cells, cumulus cells and oocytes. Although FGFs are widely distributed in different tissues and cell types, the importance and function of FGFs in the ovary are still poorly documented. FGF-10 has been shown to be an important mediator of mesenchymal and epithelial cell interactions during follicle development, promoting follicular survival, activation and growth. Besides the action on folliculogenesis, FGF-10 was recently identified as a growth factor able to improve oocyte competence. However, in antral follicles, the presence of FGF-10 is associated with increased follicular atresia, which matches its anti-estrogenic action.Discussion: From this review, we can conclude that FGF-10 is an important regulator of female reproduction. This growth factor acts in follicle survival, oocyte maturation, expansion of cumulus cells and proliferation of granulosa/theca cellsthrough direct and/or indirect actions in the control of folliculogenesis. Furthermore, FGF-10 seemed to have different effects throughout the follicular development. However, it is necessary to perform additional studies that may provide a better understanding about the importance of FGF-10 during folicullogenesis.

The use of carbon and nitrogen stable isotopes for the detection of poultry offal meal in meat-type quail feeds

The objective of the present study was to trace the inclusion of poultry offal meal (POM) in the diet of meat-type quails reared for a long period using the technique of stable isotopes. A number of 320 quails were randomly distributed into eight treatments: vegetable diet (T1), and a diet containing 8% POM were fed until the end of the experimental period (T2) or replaced by the vegetable diet on day 42 (T3), 56 (T4), 70 (T5), 84 (T6), 98 (T7), and 112 (T8). Breast muscle samples were collected from four birds randomly selected per treatment every 14 days. The obtained isotope results were submitted to multivariate analysis of variance (MANOVA) with the aid of the GLM procedure of statistical SAS program. Treatments were different from T1 when birds were sacrificed at least two weeks after the diet was changed. T2 results were different from T1 in all evaluated periods. It was concluded that it is possible to trace poultry offal meal inclusion in a strictly vegetable diet after the diet was changed for at least 14 days.

Spermatozoal ultrastructure in three species of the genus Uca Leach, 1814 (Crustacea, Brachyura, Ocypodidae)

Morphological aspects of spermatozoa in marine animals have been used in recent decades as phylogenetic criteria (spermiotaxonomy). This paper presents ultrastructural descriptions of the spermatozoa from Uca maracoani, U. thayeri, and U. vocator. A small portion of the vas deferens of each species was examined under the transmission and scanning electron microscopy. The ultrastructural analysis showed that each spermatophore consists of a varying number of spermatozoa embedded in a dense fibrillar matrix surrounded by a membrane. The spermatozoa of U. maracoani, U. thayeri, and U. vocator are typical of brachyurans. The Voluminous acrosome is characterized by three different layers. The postero-lateral surface of the acrosome is cupped by the reduced cytoplasm, and the anterior surface is covered by the operculum. The perforatorium consists of coiled, helicoidal membranous tubules and is continuous with the cytoplasm. The nucleus is composed by uncondensed chromatin and presents several lateral arms distributed over the entire equatorial plane of the cell. The presence of the apical button is a well defined character among all species of the genus Uca, but in U. thayeri it was not observed. The accessory opercular ring can be found in the three studied species, but in distinct development degree-Two centrioles were detected in U. thayeri and U. vocator, but only one was found in U. maracoani. The presence of centrioles in the mature spermatozoa is the first account for the genus Uca upto-date. Considering the ultrastructure of the spermatozoa of U. maracoani, U. thayeri, and U. vocator, we suggest that these three species partially follow the morphological patterns previously described in other Thoracotremata brachyurans. The absence of the apical button in U. thayeri spermatozoa may represent an evolutionary novelty in the genus Uca. (C) 2007 Elsevier Ltd. All rights reserved.

Attractiveness of different sweet and fatty substances to three neotropical tramp ant species (Hymenoptera : Formicidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ovarian morphology and oogenesis dynamic of the diplopod Urostreptus atrobrunneus Pierozzi & Fontanetti, 2006 (Spirostreptidae), a potential plague in urban centers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Histopathology and Ultrastructure Features of the Midgut of Adult Females of the Tick Amblyomma cajennense Fabricius, 1787 (Acari: Ixodidae) in Various Feeding Stages and Submitted to Three Infestations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Candida heliconiae sp nov., Candida picinguabensis sp nov and Candida saopaulonensis sp nov., three ascomycetous yeasts from Heliconia velloziana (Heliconiaceae)

Strains belonging to three novel yeast species, Candida heliconiae (four isolates), Candida picinguabensis (three isolates) and Candida saopaulonensis (two isolates), were recovered in the year 2000 from water of flower bracts of Heliconia velloziana L. Emigd. (Heliconiaceae) found in a forest ecosystem site in an Atlantic rainforest of south-eastern Brazil. C. picinguabensis and C. saopaulonensis were nearly identical in morphology and physiology, but sequence divergence in the D1/D2 domain of the large-subunit rDNA indicated that they should be regarded as different species. They belong to the Metschnikowiaceae clade. C. heliconiae had affinities to Pichia mexicana and related species, but was genetically isolated from all currently accepted species in that group. The type strains are C. heliconiae UNESP 00-91 C1(T) (= CBS 10000(T) = NRRL Y-27813(T)), C. picinguabensis UNESP 00-89(T) (= CBS 9999(T) = NRRL Y-27814(T)) and C. saopaulonensis UNESP 00-99(T) (=CBS 10001(T) = NRRL Y-27815(T)).