Structural, optical and electrical properties of sulfur-incorporated amorphous carbon films

Amorphous carbon-sulfur (a-C:S) composite films were prepared by vapor phase pyrolysis technique. The structural changes in the a-C:S films were investigated by electron microscopy. A powder X-ray diffraction (XRD) study depicts the two-phase nature of a sulfur-incorporated a-C system. The optical bandgap energy shows a decreasing trend with an increase in the sulfur content and preparation temperature. This infers a sulfur incorporation and pyrolysis temperature induced reduction in structural disorder or increase in sp (2) or pi-sites. The presence of sulfur (S 2p) in the a-C:S sample is analyzed by the X-ray photoelectron spectroscopy (XPS). The sp (3)/sp (2) hybridization ratio is determined by using the XPS C 1s peak fitting, and the results confirm an increase in sp (2) hybrids with sulfur addition to a-C. The electrical resistivity variation in the films depends on both the sulfur concentration and the pyrolysis temperature.

Structural and optical investigations of TiO2 films deposited on transparent substrates by sol-gel technique

An inexpensive and effective simple method for the preparation of nano-crystalline titanium oxide (anatase) thin films at room temperature on different transparent substrates is presented. This method is based on the use of peroxo-titanium complex, i.e. titanium isopropoxide as a single initiating organic precursor. Post-annealing treatment is necessary to convert the deposited amorphous film into titanium oxide (TiO2) crystalline (anatase) phase. These films have been characterized for X-ray diffraction (XRD) studies, atomic force microscopic (AFM) studies and optical measurements. The optical constants such as refractive index and extinction coefficient have been estimated by using envelope technique. Also, the energy gap values have been estimated using Tauc's formula for on glass and quartz substrates are found to be 3.35 eV and 3.39 eV, respectively.

Structural and optical investigation of semiconductor CdSe/CdS core-shell quantum dot thin films

Highly luminescent CdSe/CdS core-shell nanocrystals have been assembled on indium tin oxide (ITO) coated glass substrates using a wet synthesis route. The physical properties of the quantum dots (QD) have been investigated using X-ray diffraction, transmission electron microscopy and optical absorption spectroscopy techniques. These quantum dots showed a strong enhancement in the near band edge absorption. The in situ luminescence behavior has been interpreted in the light of the quantum confinement effect and induced strain in the core-shell structure.

A phase field study of morphological instabilities in multilayer thin films

We studied the microstructural evolution of multiple layers of elastically stiff films embedded in an elastically soft matrix using a phase field model. The coherent and planar film/matrix interfaces are rendered unstable by the elastic stresses due to a lattice parameter mismatch between the film and matrix phases, resulting in the break-up of the films into particles. With an increasing volume fraction of the stiff phase, the elastic interactions between neighbouring layers lead to: (i) interlayer correlations from an early stage; (ii) a longer wavelength for the maximally growing wave; and therefore (iii) a delayed break-LIP. Further, they promote a crossover in the mode of instability from a predominantly anti-symmetric (in phase) one to a symmetric (out of phase) one. We have computed a stability diagram for the most probable mode of break-up in terms of elastic modulus Mismatch and Volume fraction. We rationalize our results in terms of the initial driving force for destabilization, and corroborate our conclusions using simulations in elastically anisotropic systems.

Instabilities and Waves in Thin Films of Living Fluids

We formulate the thin-film hydrodynamics of a suspension of polar self-driven particles and show that it is prone to several instabilities through the interplay of activity, polarity, and the existence of a free surface. Our approach extends, to self-propelling systems, the work of Ben Amar and Cummings [Phys. Fluids 13 1160 (2001)] on thin-film nematics. Based on our estimates the instabilities should be seen in bacterial suspensions and the lamellipodium, and are potentially relevant to the morphology of biofilms. We suggest several experimental tests of our theory.

Electrical and mechanical properties of diluted magnetic semiconductor Zn1-xMnxS nanocrystalline films

Nanostructured Zn1-xMnxS films (0 less-than-or-equals, slant x less-than-or-equals, slant 0.25) were deposited on glass substrates by simple resistive thermal evaporation technique. All the films were deposited at 300 K in a vacuum of 2*10-6 m bar. All the films temperature dependence of resistivity revealed semiconducting behaviour of the samples. Hot probe test revealed that all the samples exhibited n-type conductivity. The nanohardness of the films ranges from 4.7 to 9.9 GPa, Young's modulus value ranging 69.7-94.2 GPa.

Ion beam processing of oriented CuO films deposited on (100) YSZ by laser ablation

A systematic study of Ar ion implantation in cupric oxide films has been reported. Oriented CuO films were deposited by pulsed excimer laser ablation technique on (1 0 0) YSZ substrates. X-ray diffraction (XRD) spectra showed the highly oriented nature of the deposited CuO films. The films were subjected to ion bombardment for studies of damage formation, Implantations were carried out using 100 keV Arf over a dose range between 5 x 10(12) and 5 x 10(15) ions/cm(2). The as-deposited and ion beam processed samples were characterized by XRD technique and resistance versus temperature (R-T) measurements. The activation energies for electrical conduction were found from In [R] versus 1/T curves. Defects play an important role in the conduction mechanism in the implanted samples. The conductivity of the film increases, and the corresponding activation energy decreases with respect to the dose value.

Nanocrystalline Janus films of inorganic materials prepared at the liquid-liquid interface

The interface between toluene and water has been employed to prepare ultrathin Janus nanocrystalline films of metal oxides, metal chalcogenides and gold, wherein the surface on the organic-side is hydrophobic and the aqueous-side is hydrophilic. We have changed the nature of the metal precursor or capping agent in the organic layer to increase the hydrophobicity. The strategy employed for this purpose is to increase the length of the alkane chain in the precursor or use a perfluroalkane derivative as precursor or as a capping agent. The hydrophobicity and hydrophilicity of the Janus films have been determined by contact angle measurements. The morphology of hydrophobic and hydrophilic sides of the film have been examined by field emission scanning electron microscopy.

Structural and optical investigations of TiO2 films deposited on transparent substrates by sol-gel technique

An inexpensive and effective simple method for the preparation of nano-crystalline titanium oxide (anatase) thin films at room temperature on different transparent substrates is presented. This method is based on the use of peroxo-titanium complex, i.e. titanium isopropoxide as a single initiating organic precursor. Post-annealing treatment is necessary to convert the deposited amorphous film into titanium oxide (TiO2) crystalline (anatase) phase. These films have been characterized for X-ray diffraction (XRD) studies, atomic force microscopic (AFM) studies and optical measurements. The optical constants such as refractive index and extinction coefficient have been estimated by using envelope technique. Also, the energy gap values have been estimated using Tauc's formula for on glass and quartz substrates are found to be 3.35 eV and 3.39 eV, respectively. (C) 2008 Elsevier B.V. All rights reserved.

A Method for the Deposition of Transparent Conducting Thin-Films of Tin Oxide

A modified method has been developed for the deposition of transparent semiconducting thin films of tin oxide, involving the chemical vapour phase oxidation of tin iodide. These films show sheet resistances greater than 100 Ω/□ and an average optical transmission in the visible range exceeding 80%. The method avoids uncontrolled contamination, resulting in better reproducibility of the films. The films showed direct and indirect transitions and the possibility of an indirect forbidden transition. X-ray diffraction studies reveal that the films are polycrystalline. The low mobility values of the films have been attributed to the grain boundary scattering effect.

The Unable Individual : The Actantial Analyses of Three Chinese Films and Discussion on Their Representations of the Individual’s Position in Contemporary Chinese Society

The thesis studies three contemporary Chinese films, Incense (Xianghuo 2003), Beijing Bicycle (Shiqi sui de danche, 2001), and South of the Clouds (Yun de nanfang, 2004). The aim of the thesis is to find out how these films represent the individual, his relationships with others, and his possibilities in society. The films all portray a male individual setting out to pursue a goal, facing one obstacle after the other in the process, and in the end failing to achieve his goal. The other characters in the films are also primarily either unable or unwilling to help the lead character. In the thesis these features of the films are analysed by applying A.J. Greimas’s structuralist semiotic theory about the actantial structure of discourses. The questions about the individual’s position are answered by defining which instances in the films actually represent the actantial positions of the sender, receiver, subject, object, helper and opponent. The results of the actantial analyses of the three films are further discussed in the light of theories regarding individualization. The focus is on the theories of Ulrich Beck, Elisabeth Beck-Gernsheim and Zygmunt Bauman, who see a development towards individualization in societies following the disintegration of traditional social structures. For the most part, these theories do seem to be applicable to the films’ representations of the individual’s position, especially regarding the increased responsibility of the individual. For example, the position of the family is represented as either insignificant or negative in all of the films, which fits with the description of the individualized society, contradicting the idea of traditional Chinese society. On the other hand, the identities and goals of the characters in the films are not represented as fragmented in the way the theories would suggest.

Book Review: "Fashion on television: Identity and celebrity culture"

Film, costume and fashion have attracted many scholarly works thanks to the interdisciplinary field generated by feminist film studies, gender studies and fashion studies. In particular, the extent of scholarship on the Hollywood studio system has enabled explorations of feminist interpretation of women’s films through the construction of gender identity; the association between fashion and the body; and histories of the relationship between classic Hollywood, costume design and women’s narratives (see Doane 1987; Gaines and Herzog 1990; Stacey 1994; Street 2001)...

Electrochemical Reduction of Oriented Graphene Oxide Films: An in Situ Raman Spectroelectrochemical Study

Graphene oxide (GO) is assembled on a gold substrate by a layer-by-layer technique using a self-assembled cystamine monolayer. The negatively charged GO platelets are attached to the positively charged cystamine monolayer through electrostatic interactions. Subsequently, it is shown that the GO can be reduced electrochemically using applied DC bias by scanning the potential from 0 to -1 V vs a saturated calomel electrode in an aqueous electrolyte. The GO and reduced graphene oxide (RGO) are characterized by Raman spectroscopy and atomic force microscopy (AFM). A clear shift of the G band from 1610 cm-1 of GO to 1585 cm-1 of RGO is observed. The electrochemical reduction is followed in situ by micro Raman spectroscopy by carrying out Raman spectroscopic studies during the application of DC bias. The GO and RGO films have been characterized by conductive AFM that shows an increase in the current flow by at least 3 orders of magnitude after reduction. The electrochemical method of reducing GO may open up another way of controlling the reduction of GO and the extent of reduction to obtain highly conducting graphene on electrode materials.

Effects of the digital subtitling software on the subtitling process : A survey among Finnish professional television subtitlers

Tutkielma käsittelee suomalaisten televisiotekstittäjien ammatillisuutta, käännösprosessia ja digitaalisten tekstitysohjelmien vaikutuksia tekstitysprosessiin ammattitekstittäjien näkökulmasta. Suomen television digitalisoituminen on aiheuttanut mullistuksia myös tekstitysalalla kun tekstitettävä kuvamateriaali on ryhdytty toimittamaan käännöstoimistoille ja tekstittäjille digitaalisena. Teoriaosuudessa käsitellään käännös- ja tekstitystutkimusta sekä koulutusta Suomessa, ammattitaitoa ja ammatillisuutta sekä kääntämisen apukeinoja. Tekstittäminen esitellään erikoistuneena kääntämisen muotona. On kuitenkin myös huomioitava, että kääntäminen on yksi vaihe tekstitysprosessissa. Teoriaosuus päättyy suomalaisten televisiotekstittäjien arjen ja työkentän nykytilanteen käsittelyyn – tekstittäjät työskentelevät monenlaisilla työehdoilla ja laadun kriteerit saatetaan joutua arvioimaan uudelleen. Empiirisen osan alussa esitetään, että suomalaisia televisiotekstittäjiä on haastateltu yllättävän vähän, ja Jääskeläisen ajatuksiin nojaten mainitaan, että tekstittämisen alalla on vielä paljon tutkimatta – etenkin suomalaisesta tekstitysprosessista löytyy tutkittavaa. Tutkimuskohde on ammatikseen televisioon tekstityksiä tekevät kääntäjät. Suomalaiselle tekstitykseen erikoistuneelle käännöstoimistolle työskenteleville tekstittäjille lähetettiin alkutalvesta 2008 kyselylomake, jolla kartoitettiin sekä monivalintakysymyksillä että avoimilla kysymyksillä heidän ammatillisuuttaan, työmenetelmiään, käännös- ja tekstitysprosessiaan, ammattiylpeyttään ja -identiteettiään, ajanhallintaansa, sekä heidän käyttämäänsä digitaalista tekstitysohjelmaa. Tutkimuksessa kävi ilmi, että lähes kolmanneksella vastaajista on ammatistaan neutraali tai jopa negatiivinen käsitys. Näitä tekstittäjiä yhdistää se seikka, että kaikilla on alle 5 vuotta kokemusta alalta. Valtaosa vastanneista on kuitenkin ylpeitä siitä, että toimivat suomen kielen ammattilaisina. Tekstitysprosessi oli lomakkeessa jaettu esikatseluvaiheeseen, käännösvaiheeseen, ajastamisvaiheeseen ja korjauskatseluvaiheeseen. Tekstittäjät pyydettiin mm. arvioimaan tekstitysprosessinsa kokonaiskestoa. Kestoissa ilmeni suuria eroavaisuuksia, joista ainakin osa korreloi kokemuksen kanssa. Runsas puolet vastaajista on hankkinut digitaalisen tekstitysohjelmiston käyttöönsä ja osa ajastaa edelleen käännöstoimistossa muun muassa ohjelmiston kalleuden vuoksi. Digitaalisen ohjelmiston myötä tekstitysprosessiin ja työkäytänteisiin on tullut muutoksia, kun videonauhureista ja televisioista on siirrytty pelkän tietokoneen käyttöön. On mahdollista tehdä etätyötä kaukomailta käsin, kääntää ja ajastaa lomittain tai tehdä esiajastus ja kääntää sitten. Digitaalinen tekniikka on siis mahdollistanut tekstitysprosessin muuttumisen ja vaihtoehtoiset työmenetelmät, mutta kaikista menetelmistä ei välttämättä ole tekstittäjälle hyötyä. Perinteinen tekstitysprosessi (esikatselu, repliikkijakojen merkitseminen käsikirjoitukseen, kääntäminen ja repliikkien laadinta, korjaukset ja tarkastuskatselu) vaikuttaa edelleen tehokkaimmalta. Vaikka työkäytänteet eroavat toisistaan, kokonaiskäsitys on se, että digitalisoitumisen alkukangertelujen jälkeen tekstittäjien työskentely on tehostunut.