A sustainable alternative for cooling the machining processes using a refrigerant fluid in recirculation inside the toolholder

This article presents a cooling system for cutting tool in turning based in a toolholder with cooling fluid flowing inside its body being that this fluid must necessarily be able to phase change due to heat generated from machining processes. In this way, the fluid evaporates just under the cutting tool allowing a heat transfer more efficient than if were used a fluid without phase change once the latent heat of evaporation is beneficial for removal heat. Following, the cooling fluid evaporated passes through a condenser located out of the toolholder where it is condensated and returns to the toolholder again and a new cycle is started. In this study, the R-123, a hydrochlorofluorocarbon (HCFC) fluid, was selected for the turning of a Cr-Ni-Nb-Mn-N austenitic steel of hard machinability. The machining tests were carried out under three different machining conditions: dry machining, external cutting fluid (conventional method), and with the toolholder proposed. As result, the developed system allows a surface roughness up to 10% better than dry machining and a tool life close to the conventional method, but 32% superior to dry machining; moreover, there are environmental and economics advantages once the cooling fluid is maintained in a loop circuit.

Integrating strategic and sustainable design approach for innovation process: a cement case study

Global society and technology have changed the relationships of the market. Quality and cost are not the main aspects of any industrial product. On the other hand, design, innovation and sustainability became significant requirements to company’s competitiveness. In this context, the design approach has shown evolutions, integrating social and environmental aspects beside traditional aspects such as technical and economic. Still, design has been becoming a strategic opportunity for companies, improving their competitiveness and increasing their market share. Thus, this research has analyzed the integration of both the Sustainable Design and Strategic Design Coaching (SDC) method in the making decision activities of companies. A cement company (BQMIL) was assigned as case study, in which the previous results have pointed out the significant hole of those concepts to generate Eco-innovation and Eco-Brand to increase its market share, corroborating the expectative of the design team

Gestão Sustentável da água: um estudo da conscientização ambiental em atividades residenciais urbanas

The search for sustainable solutions through an appropriate environmental administration of the available natural resources, that comes from encounter to the aspirations of preservation of the environment and of the human being, in way to diagnose and to solve the environmental and social problems with the smallest possible impact to the nature and the man, it is the great challenge, so much for that generation, as for the future generations. The study of the environmental problems of the water and the participation and the social actors' environmental understanding as a whole, interferes in the field of the thematic environmental international, contemplating the strategic need of an appropriate administration of that very natural one, through a program returned to the diagnosis of the problems and in the search of compatible maintainable solutions, in a social and environmental politics of planning and environmental education, centered above all in the citizen's voice , user of that system. The present thesis she seeks to study the problem of the maintainable administration of the water, focusing the participation and the citizen's environmental understanding in the use of that very natural one for urban residential activities, in what concerns the approach and analyses of variables that treat of the measurement of general knowledge and you adapt, sense of community of the access to the means of information and of the attitudes and environmental behaviors, besides the variables of partner-demographic characterization or personal identification of the interviewed ones of an exploratory research of the type " survey ", accomplished through a stratified aleatory sampling, being the strata each one of the 4 (four) Political-Administrative Areas of the Natal city, having happened the collection of the data in the period of february to april/2002. The methodology used in this work it constitutes in the application of questionnaires with scales of the type Likert to measure the echo-varied of the study, besides a partner-demographic scale for the characterization of the studied sample. For the analysis of the results, it was made an exploratory descriptive study initially, followed by the use of techniques statistical multivariate s, such as, factorial analysis through the application of main components, besides the accomplishment of studies of multiple lineal regression. To complement this study, the accomplishment of Tests of Independence was proceeded through the Qui-square of Pearson, in way to verify the dependence of the associations between the partner-demographic variables and the principal selected variables and presents in the resulting factors of the factorial analysis. The results appear for a low level of environmental knowledge, of access to the information and community's sense, besides the verification that the principal factors resultants send for the need of feeling emphasis in the programs and administration actions addressed for the environmental understanding, the behaviors and attitudes that approach the information and the environmental education, besides the reuse of the water

Reuse of norgestomet implants in an eCG-based superovulation protocol administered to Nelore (Bos taurus indicus) cows

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interspecific fish hybrids in Brazil: management of genetic resources for sustainable use

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microbiological and physicochemical treatments applied to metallurgic industry aiming water reuse

Estudou-se o reuso de água de um sistema composto por estação de tratamento de esgoto (ETE) com aeração prolongada e lodo ativado, e em uma estação compacta de tratamento de água (ECTA) de uma indústria metalúrgica. Os processos para obtenção da água de reuso foram: microbiológico e físico-químico. O esgoto doméstico foi bombeado para a ETE, onde houve formação de flocos biológicos e água clarificada. Avaliou-se a eficiência do processo microbiológico da ETE mediante a remoção de demanda bioquímica de oxigênio (DBO), demanda química de oxigênio (DQO) e sólidos sedimentáveis (SS). A eficiência do processo físico-químico de clarificação e desinfecção foi avaliada mediante análises de pH, turbidez, cor, contagem de bactérias heterotróficas aeróbias, cloro livre, dureza, alcalinidade, cloretos, sulfatos, sólidos totais dissolvidos (STD). Na água de reuso além desses parâmetros avaliou-se a toxicidade aguda ao microcrustáceo Daphnia similis.

Application of MALDI-MS analysis of Rainforest chemodiversity: a keystone for biodiversity conservation and sustainable use

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reuse of sand, crushed sugarcane and peanut hull-based substrates for cherry tomato cultivation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

NEST REUSE AND COMMUNAL NESTING IN MICROTHURGE-CORUMBAE (HYMENOPTERA, MEGACHILIDAE), WITH SPECIAL REFERENCE TO NEST DEFENSE

Observations on the nesting activities of Microthurge corumbae, carried out at the University Campus of Ribeirao Preto, São Paulo, Brazil, from 1977 to 1981, indicated that 61.9% of nests were re-used by succeeding generations. Re-use by one generation was more frequent than by two generations, and re-use by a third was observed only once. Nests were re-used by one or several females. Single females were more frequently in the first re-use. In these cases nest re-use did not differ essentially from the solitary foundation of a new nest, except for the adoption of a pre-existing nest without excavation. In multifemale nests, analysis of relative age (wing wear), ovarian and spermathecal conditions of associated females and the content of nests at excavation indicated that the social pattern in such colonies is communal. There is some evidence that the associated females are relatives. The chalcidoid wasp Leucospis was the principal nest parasite, and ants of the genus Crematogaster were nest predators. In multifemale nests, the rate of parasitism was significantly lower than in solitary nests, indicating that nest-sharing resulted in improved nest defense. on the other hand. The absence of predation on immatures of the first generation of M. corumbue in multifemale nests suggests that such nests are also more resistant to attack by predators.

Anticoccidial effects of coumestans from Eclipta alba for sustainable control of Eimeria tenella parasitosis in poultry production

The aim of this study was to evaluate the anticoccidial efficacy of a product containing coumestans from Eclipta alba. Experimental conditions were set up as to reproduce the environment conditions for husbandry adopted in commercial broiler farms. Broilers were raised in broiler chicken shed provided with feeders, drinkers, illumination and temperature control systems and floor covering to afford an adequate nourishing environment. Male Cobb broilers (240) were assigned to four experimental groups being each experimental group set apart in rice straw-covered shed isolated with wire mesh. One-day-old broilers were reared in a coccidian-free environment with ad libitum supply of filtered water and freely available standard feed, from the 1st to the 35th day of life. The T1 group received standard feed (negative control); T2 was treated with standard feed supplemented with 66 ppm of salinomycin (positive control); groups T3 and T4 had standard feed supplemented with the ethyl acetate fraction from methanolic extract of E. alba aerial parts, which contains the coumestans WL and DWL (120 and 180 ppm, respectively). The chicken broilers were individually infected with 2 x 104 oocysts of Eimeria tenella when they were 14 days old and were monitored weekly to evaluate zootechnical parameters such as weight gain and food conversion ratio. Counting of coccidial oocyst in chiken feces was assessed from random samples, from the 21st to 28th days of life, which corresponded to 7-14 days after the infection. Five chickens selected at random from each experimental group were subsequently euthanized at 21, 28 or 35 days of life to determine the lesion score in the cecal region and to excise a cecum portion for histopathological evaluation. The group treated with coumestans from E. alba presented an average weight gain and food conversion ratio higher than the negative control group and similar to the mean value of the positive control group. Coumestan-treated groups showed a significant decrease in the oocyst counting since the 21th day of life and displayed a reduced number of macroscopic lesions. Histopathological evaluations of cecum fragments showed that both treatments induced the migration of defense cells at the site of infection. A severe destruction of the cecal lining was found in the intestinal tract of broilers fed with a coumestans dose of 180 ppm. Overall, our results validate the use of a phytotherapy containing E. alba coumestans at a dose of 120 ppm as a therapeutic or prophylactic agent against avian coccidiosis. (C) 2010 Elsevier B.V. All rights reserved.

Estudo de dosagem de tijolos de solo-cimento com adição de resíduos de construção e demolição

An evaluation of the composition of soil cement bricks with construction and demolition waste. Sustainable development requires the existence of a production network that includes the reuse of construction waste for new materials. Current analysis investigates an optimal soil-cement composition made up of construction and demolition waste for the manufacture of pressed bricks. Soil-cement bricks were manufactured from construction and demolition wastes (CDW), A-4 classified fine sandy soil and cement CP II Z 32. Laboratory tests, comprising test compaction, optimum water content and maximum dry specific weight, consistency limits, grain size distribution and linear shrinkage, were made to characterize the materials researched. Compressive strength and absorption tests were also undertaken in different combinations of composition. Results showed that the application of CDW improved soil-cement qualities and reduced shrinkage of the material used.

Bibliographical review of the used tyre in concrete

Due to the progressive increase of vehicles, the number of used tires is globally one of the serious environmental problems faced now. Therefore, several researches have being developed for its reuse. The use of tires' rubber in the concrete is a possible form of its a pplication, aiming a the recycling of this material and the improvement of certain properties, as tenacity, impact resistance, thermal and acoustic isolation. This article presents conclusions that several researchers obtained using the rubberized concrete. Thus there were researched several works enclosing the period of 1993 to 2003, presenting then the results of some characteristics of this concrete such as: physical properties in fresh and hardened state, mechanical properties and properties that remit the durability. The bibliographical revision has as objective to subsidize future researches that can contribute to improve the use of this concrete in civil construction.

Mortar added by tyre rubber residues: Characterisation in fresh and hardened state

Due to the progressive increase of vehicles, the number of used tires is globally one of the serious environmental problems faced now. Therefore, several researches have being developed for its reuse. The use of tires' rubber in the concrete is a possible form of its application, aiming at the recycling of this material and the improvement of certain properties, as tenacity, impact resistance, thermal and acoustic isolation. This article presents conclusions that several researchers obtained using the rubberized concrete. Thus there were researched several works enclosing the period of 1993 to 2003, presenting then the results of some characteristics of this concrete such as: physical properties in fresh and hardened state, mechanical properties and properties that remit the durability. The bibliographical revision has as objective to subsidize future researches that can contribute to improve the use of this concrete in civil construction.