Ribeira, técnica versus natureza: transformações em prol de um projeto de modernização (1860-1932)

The necessity of the insertion of the capital of Rio Grande do Norte in the world-wide commercial scene and its claim as the seat of political power, in ends of nineteenth and beginning of twentieth century, determined the direction of urban interventions undertaken by government to restructure the city. In that matter, there were several actions of improvements and embellishment in Natal, which had, as a starting point, the adequacy works of the port, located in the Ribeira quarter, with the aim of ending the physical isolation that reinforced its economic stagnation. Besides the problems faced in the opening bar of the Potengi River, and would complement the required improvements, other barriers demonstrate the tension established between the physic-geographic field and the man: the flooded and slope which connected Cidade Alta and Ribeira the first two quarters of the city.The execution of these works demanded knowledge whose domain and application it was for engineering. But, how the actions done for the engineers, in sense to transform natural areas into constructed spaces made possible the intentional conformation of the quarter of the Ribeira in a commercial and politician-administrative center, in the middle of the XIX century and beginning of the XX? Understand, therefore, the employment effects of technology on the physical-geographical Ribeira, is the objective of this work that uses theoretical and methodological procedures of Urban Environmental History, by analyzing the relationship between the environment and the man, mediated by knowledge and use of technologies. The documental research was used, as primary sources, the Messages of the Provincial Assembly Government that later became the Legislative Assembly of Rio Grande do Norte reports and articles on specialized publications, in addition to local newspapers. The work is structured in five chapters. First, some comments about Urban Environmental History (Chapter 1) supplemented with analysis of the conceptual construction of nature in the Contemporary Era and its application in the city (chapter 02), the following chapters (03 and 04) deal with the rise of engineers as a active group in the Brazilian government frameworks and their vision about the nature inside the urban environment and it is studied how the professional technicians dealt with the improvement work of the harbor and in the shock with the natural forces. Other works that would complement this "project" of modernization and had had natural obstacles to be removed the Ribeira flood and slope constitute the subject of the fifth chapter. Finally, some final considerations retake the initial discussions aiming an association between the technique and the nature as junction elements inside the process of constitution of a Modern Natal

Henrique Novaes: técnica, território e cidade em uma trajetória profissional: Brasil, primeira metade do século XX

The career of civil engineer Henrique de Novaes, a remarkable figure in the academic, technical and political fields, demonstrates its extensive and relevant work across Brazil in the first half of the twentieth century. It covered from the design of water supply and sewage works, road and rail transport networks, works against drought in the Northeast, hydroelectric and harbor facilities to the urbanization planning and architectural projects, which displays a systematic and multiple production. City and territory conformed to his fields of verification, practical and above all, transformation. The search for understanding of the inclusion of a social actor in this process thus contributes to the specific analysis of the doings of Henrique de Novaes, who graduated at Polytechnic School of Rio de Janeiro in 1906. From a polymorphic activity in different scales, one tries to figure how, through academic education or professional practice, urban history in Brazil can be told or built. The introduction of technological innovations matched the purposes of planning and urban sprawl, as well as met the specifications of regulation and institutionalization of public infrastructure services at the time. The overall plans proposed by the engineer thought of the city as a whole, interconnected to the structural networks. At the same time, the knowledge of a larger physical scale the territory bounces back in the urban in a relationship of reciprocity and completeness. The objective research, therefore, tries to understand the roles played by Henrique de Novaes s works and academic education in the accomplishment of systematic modernization of Brazilian urban space and territory, recovering a little known historical figure by current historiography. It is proposed, as methodological axis, that the study of this professional career configures itself as an essential element for understanding the idea of progress embodied in the technical studies and proposals for improvements and sanitation nationwide in the first half of the twentieth century . The primary sources for the construction of this analysis were technical articles in journals of the period ( Clube de Engenharia , Viação e Revista Brasileira de Engenharia ), and technical reports, government messages, newspaper articles published at the time, autobiographical reports and the engineer s verbal communications with relatives. The work is structured in three chapters: "Biographical traces, academic education and 'technical and political' activities" illustrates the initiation into the technical, public and political environment; Chapter 2, "Technique and territory" outlines his network understanding through sanitation and transport services; Chapter 3 "Technique and City" describes the influence of polytechnics knowledge on the propositions of modernization of cities; Finally, "Final Thoughts: An Evaluation," presents an overview of the affiliations and practice of an engineer in the different scales, and its contribution to the modernization of Brazilian urban and territorial space

Aquisição e construção de modelos estáticos análogos a reservatórios petrolíferos com tecnologia lidar e georadar

The present work develops a methodology to establish a 3D digital static models petroleum reservoir analogue using LIDAR and GEORADAR technologies. Therefore, this work introduce The methodolgy as a new paradigm in the outcrop study, to purpose a consistent way to integrate plani-altimetric data, geophysics data, and remote sensing products, allowing 2D interpretation validation in contrast with 3D, complexes depositional geometry visualization, including in environmental immersive virtual reality. For that reason, it exposes the relevant questions of the theory of two technologies, and developed a case study using TerraSIRch SIR System-3000 made for Geophysical Survey Systems, and HDS3000 Leica Geosystems, using the two technologies, integrating them GOCAD software. The studied outcrop is plain to the view, and it s located at southeast Bacia do Parnaíba, in the Parque Nacional da Serra das Confusões. The methodology embraces every steps of the building process shows a 3D digital static models petroleum reservoir analogue, provide depositional geometry data, in several scales for Simulation petroleum reservoir

A pesquisa na Emprapa: o convênio com o grupo de pesquisa MHTX.

Resumo: O Grupo de Pesquisa MHTX formalizou um convênio de cooperação técnica com a Embrapa Informática Agropecuária, visando a elaboração e o gerenciamento de Sistemas de Organização do Conhecimento (SOC) da Embrapa. A convergência de interesses e motivações de ambas as instituições permitiram o desenvolvimento e a validação de vários recursos, entre os quais, terminologias; taxonomias facetadas e navegacionais; reengenharia semântica para vocabulários controlados; modelos de avaliação de SOC, prevendo alinhamento terminológico baseado em reúso de tesauros; e ferramentas computacionais amigáveis para visualização de SOC com facilidades para cognição e apreensão conceitual da informação e do conhecimento representados. Diante de tantos resultados significativos, vislumbra-se um horizonte amplo e convidativo à proposição e exploração de novos temas de pesquisa conjunta entre ambas as instituições e de suas aplicações decorrentes.

A evolução técnica e orgânica das Unidades de Manobra de Cavalaria no pós-Guerra Fria (1993-2015)

A Guerra e os Exércitos que nela tomam parte, nunca se mantiveram como imutáveis ao longo de séculos de História Militar. Analisando os últimos 22 anos, verifica-se que existiram alterações vividas no contexto Político-Militar Internacional que, por sua vez, repercutiram-se e moldaram a conjetura nacional. São diversas as modificações reproduzindo-se em diversos níveis das estruturas Militares e, consequentemente, afetando a Arma de Cavalaria, também ela marcadamente alvo de alterações. Com o intuito de estudar parte dessas mesmas alterações, surge o presente relatório subordinando-se ao tema A evolução Técnica e Orgânica das Unidades de Manobra de Cavalaria no pós-Guerra Fria (1993-2015), enquadrado no Mestrado em Cavalaria ministrado pela Academia Militar. Com a elaboração do presente relatório, pretende-se concorrer para identificar uma parte relevante das alterações sofridas pelas Unidades de Manobra de Cavalaria, aos níveis técnico e orgânico, desde o fim da Guerra Fria até à atualidade. Com vista a alcançar este objetivo, numa abordagem dedutiva estudam-se as Unidades de Manobra da Cavalaria do Escalão Grupo até ao Escalão Pelotão e compara-se a sua evolução nos últimos 22 anos, mediante duas variáveis distintas. A primeira ao nível Orgânico, onde são abordados itens como a Composição Esquemática e o número de Efetivos explanados nos Quadros Orgânicos das respetivas Unidades. A segunda variável ao nível dos Principais Sistemas de Armas que equiparam e equipam as Unidades em estudo. Nesta variável são estudados itens como a Mobilidade e o Poder de Fogo desses mesmos Sistemas de Armas. No sentido de operacionalizar a comparação acima referida foi empregue o Método de Procedimento Comparativo, numa abordagem Mista, onde são utilizados dados recolhidos através de Análise Documental e de Pesquisa Bibliográfica. O Relatório inicia-se com um breve Quadro Conceptual, apresentando-se de seguida uma síntese relativa ao contexto Político-Militar Internacional vivido na Guerra Fria e Pós-Guerra Fria. Posteriormente, são apresentadas as Unidades de Manobra de Cavalaria e todos os resultados referentes à pesquisa. Fruto da análise feita, são várias as conclusões que foram sendo determinadas. Com respeito à Orgânica, conclui-se que existiram alterações significativas aos Quadros Orgânicos nos anos de 1993, 2006, 2009 e 2015. Neste âmbito, destacam-se ao Escalão Grupo a extinção do Grupo de Auto Metralhadoras e a criação do Grupo de Reconhecimento. Salientam-se ao Escalão Esquadrão mudanças na Composição Esquemática das Unidades, denotando-se ainda uma tendência para a diminuição dos meios que equipam as Unidades de Reconhecimento aprontadas pelo Regimento de Cavalaria 6 e Quartel de Cavalaria. O decréscimo dos Efetivos também é uma alteração patente nos 23 anos estudados. No que concerne aos Sistemas de Armas, salienta-se o Grupo de Carros de Combate como a Unidade com a maior evolução sofrida devido à transição por três Carros de Combate distintos durante o período em estudo. Verifica-se ainda uma disparidade entre os Sistemas de Armas que atualmente equipam as Unidades de Reconhecimento sediadas no Regimento de Cavalaria 6 e o Quartel de Cavalaria.

A organização do processo de projeto de arquitetura no meio profissional: uma análise da produção em escritórios

This paper examines, through case studies, the organization of the production process of architectural projects in architecture offices in the city of Natal, specifically in relation to building projects. The specifics of the design process in architecture, the production of the project in a professional field in Natal, are studied in light of theories of design and its production process. The survey, in its different phases, was conducted between March 2010 and September 2012 and aimed to identify, understand, and analyze comparatively, by mapping the design process, the organization of production of building projects in two offices in Natal, checking as well the relationships of their agents during the process. The project was based on desk research and exploration, adopting, for both, data collection tools such as forms, questionnaires, and interviews. With the specific aim of mapping the design process, we adopted a technique that allows obtaining the information directly from employee agents involved in the production process. The technique consisted of registering information by completing daily, during or at the end of the workday, an individual virtual agenda, in which all agent collaborators described the tasks performed. The data collected allowed for the identification of the organizational structure of the office, its hierarchy, the responsibilities of agents, as well as the tasks performed by them during the two months of monitoring at each office. The research findings were based on analyses of data collected in the two offices and on comparative studies between the results of these analyses. The end result was a diagnostic evaluation that considered the level of organization and elaborated this perspective, as well as proposed solutions aimed at improving both the organization of the process and the relationships between the agents under the lens analyzed

Avaliação da corrosão em dutos por técnica gravimétrica e de resistência elétrica

With the increasing of demand for natural gas and the consequent growth of the pipeline networks, besides the importance of transport and transfer of oil products by pipeline, and when it comes to product quality and integrity of the pipeline there is an important role regarding to the monitoring internal corrosion of the pipe. This study aims to assess corrosion in three pipeline that operate with different products, using gravimetric techniques and electrical resistance. Chemical analysis of residues originated in the pipeline helps to identify the mechanism corrosive process. The internal monitoring of the corrosion in the pipelines was carried out between 2009 and 2010 using coupon weight loss and electrical resistance probe. Physico-chemical techniques of diffraction and fluorescence X-rays were used to characterize the products of corrosion of the pipelines. The corrosion rate by weight loss was analyzed for every pipeline, only those ones that has revealed corrosive attack were analyzed located corrosion rate. The corrosion potential was classified as low to pipeline gas and ranged from low to severe for oil pipelines and the pipeline derivatives. Corrosion products were identified as iron carbonate, iron oxide and iron sulfide

Caracterização reológica de pastas de cimento portland de alta resistência contendo diferentes tipos de polímeros superabsorventes pela técnica de reometria rotacional

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

A sala de aula em cena: uma pesquisa em ensino do teatro a partir da experiência docente

At first moment we present a reflection about the history of theater and later a contextualization of didactic movements oriented to scenic arts. Through at the constant dialogue with authors of areas involving education, theatre, corporeality and music was possible analyzing, develop and criticize a education work under my responsibility involving fourteen classes. At the second moment will occur a critical self about the quality of theater classes his contents and methodologies. The technique will be at side of the emotion and together develop skills aimed at tracing paths for theater developed at a classroom of a especific private school in Natal-RN. At the third moment one class is chosen for analyze of the academic research and many experiments happen after this decision, initiated and sensitized through of the music with a significant look at the corporeality and prioritizing the theater as content in ninth grade - elementary school two. At the conclusion is possible see that learning is mutual and the theater can become life routine as well as the arts in general and when all arts will be regularized into the national educational system for public and private schools we will have more susceptible humans and more intellectual capacity

Mesmo com o sacrifício da própria vida : vivências de prazer e sofrimento no trabalho entre policiais militares do DF

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Economia, Administração e Contabilidade, Programa de Pós-Graduação em Administração, 2016.

Efeito antibacteriano de tecidos têxteis revestidos por prata através da técnica de deposição por plasma

In this study, it has been investigated the influence of silver film deposition onto 100% polyester woven and non-woven, on the survival of Escherichia coli and Staphylococcus aureus in contact with these surfaces. The treatment was performedin a chamber containing the working gas at low pressure (~ 10-2 mbar). Some process parameters such as as voltage: 470 V; pressure: 10-2 mbar; current : 0.40 A and gas flow: 6 and 10 cm3/min were kept constant. For the treatments with purêargon plasma using a flow of 6 and 10 cm3/min, different treatment times were evaluated, such as, 10 , 20, 30, 40, 50 and 60 minutes. Contact angle (sessile drop), measurements were used to determine the surface tension of the treated fabrics and its influence on the bacteria grow as weel as the possibilities of a biofilm formation. The formation of a silver film, as well as the amount of this element was verified byEDX technique. The topography was observed through scanning electron microscopy (SEM) to determine the size of silver grains formed on the surfaces of the fabric and assess homogeneity of treatment. The X-ray diffraction (XRD) was used to analyze the structure of silver film deposition. The woven fabric treatments enabled the formation of silver particulate films with particle size larger than the non-woven fabrics. With respect to bacterial growth, all fabrics were shown to be bactericidal for Staphylococcus aureus (S. aureus), while for the Escherichia coli (E. coli), the best results were found for the non-woven fabric (TNT) treated with a flow of 10 cm3/min to both bacteria

Nova técnica para obtenção de fraturas com altíssima condutividade em poços de petróleo

Increase hydrocarbons production is the main goal of the oilwell industry worldwide. Hydraulic fracturing is often applied to achieve this goal due to a combination of attractive aspects including easiness and low operational costs associated with fast and highly economical response. Conventional fracturing usually involves high-flowing high-pressure pumping of a viscous fluid responsible for opening the fracture in the hydrocarbon producing rock. The thickness of the fracture should be enough to assure the penetration of the particles of a solid proppant into the rock. The proppant is driven into the target formation by a carrier fluid. After pumping, all fluids are filtered through the faces of the fracture and penetrate the rock. The proppant remains in the fracture holding it open and assuring high hydraulic conductivity. The present study proposes a different approach for hydraulic fracturing. Fractures with infinity conductivity are formed and used to further improve the production of highly permeable formations as well as to produce long fractures in naturally fractured formations. Naturally open fractures with infinite conductivity are usually encountered. They can be observed in rock outcrops and core plugs, or noticed by the total loss of circulation during drilling (even with low density fluids), image profiles, pumping tests (Mini-Frac and Mini Fall Off), and injection tests below fracturing pressure, whose flow is higher than expected for radial Darcian ones. Naturally occurring fractures are kept open by randomly shaped and placed supporting points, able to hold the faces of the fracture separate even under typical closing pressures. The approach presented herein generates infinite conductivity canal held open by artificially created parallel supporting areas positioned both horizontally and vertically. The size of these areas is designed to hold the permeable zones open supported by the impermeable areas. The England & Green equation was used to theoretically prove that the fracture can be held open by such artificially created set of horizontal parallel supporting areas. To assess the benefits of fractures characterized by infinite conductivity, an overall comparison with finite conductivity fractures was carried out using a series of parameters including fracture pressure loss and dimensionless conductivity as a function of flow production, FOI folds of increase, flow production and cumulative production as a function of time, and finally plots of net present value and productivity index

A eficiência técnica dos portos e terminais públicos e privados brasileiros marítimos no período de 2010 a 2014

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

Uma metodologia para a análise do desempenho sustentável dos postos de revenda de combustível na cidade de Natal/RN, com o uso de data envelopment analysis-DEA

The increasing use of fossil fuels in line with cities demographic explosion carries out to huge environmental impact in society. For mitigate these social impacts, regulatory requirements have positively influenced the environmental consciousness of society, as well as, the strategic behavior of businesses. Along with this environmental awareness, the regulatory organs have conquered and formulated new laws to control potentially polluting activities, mostly in the gas stations sector. Seeking for increasing market competitiveness, this sector needs to quickly respond to internal and external pressures, adapting to the new standards required in a strategic way to get the Green Badge . Gas stations have incorporated new strategies to attract and retain new customers whom present increasingly social demand. In the social dimension, these projects help the local economy by generating jobs and income distribution. In this survey, the present research aims to align the social, economic and environmental dimensions to set the sustainable performance indicators at Gas Stations sector in the city of Natal/RN. The Sustainable Balanced Scorecard (SBSC) framework was create with a set of indicators for mapping the production process of gas stations. This mapping aimed at identifying operational inefficiencies through multidimensional indicators. To carry out this research, was developed a system for evaluating the sustainability performance with application of Data Envelopment Analysis (DEA) through a quantitative method approach to detect system s efficiency level. In order to understand the systemic complexity, sub organizational processes were analyzed by the technique Network Data Envelopment Analysis (NDEA) figuring their micro activities to identify and diagnose the real causes of overall inefficiency. The sample size comprised 33 Gas stations and the conceptual model included 15 indicators distributed in the three dimensions of sustainability: social, environmental and economic. These three dimensions were measured by means of classical models DEA-CCR input oriented. To unify performance score of individual dimensions, was designed a unique grouping index based upon two means: arithmetic and weighted. After this, another analysis was performed to measure the four perspectives of SBSC: learning and growth, internal processes, customers, and financial, unifying, by averaging the performance scores. NDEA results showed that no company was assessed with excellence in sustainability performance. Some NDEA higher efficiency Gas Stations proved to be inefficient under certain perspectives of SBSC. In the sequence, a comparative sustainable performance and assessment analyzes among the gas station was done, enabling entrepreneurs evaluate their performance in the market competitors. Diagnoses were also obtained to support the decision making of entrepreneurs in improving the management of organizational resources and promote guidelines the regulators. Finally, the average index of sustainable performance was 69.42%, representing the efforts of the environmental suitability of the Gas station. This results point out a significant awareness of this segment, but it still needs further action to enhance sustainability in the long term

O impacto socioeconômico da implementação do programa jovem aprendiz a partir da inclusão laboral dos jovens aprendizes atendidos pelo Instituto Federal de Brasília - Campus Estrutural

Dissertação apresentada para obtenção do grau de Mestre em Educação Social e Intervenção Comunitária