Annual report by the State Inspector of Mines to the Governor of the State of New Mexico

Title varies slightly

Ores and industry in the Far East; the influence of key mineral resources on the development of oriental civilization /

Mode of access: Internet.

Annual Report of the Chief Inspector of Mines

Mode of access: Internet.

Royalty Management Program : hearing before the Committee on Mineral Resources Development and Production of the Committee on Energy and Natural Resources, United States Senate, One Hundredth Congress, second session ....

"July 12, 1988" -- pt.2.

USGS geochemical studies outline mineral potential and environmental hazards in southeastern Oregon.

Mode of access: Internet.

Assessing longwall support-roof interaction from shield leg pressure data

A concept has been developed where characteristic load cycles of longwall shields can describe most of the interaction between a longwall support and the roof. A characteristic load cycle is the change in support pressure with time from setting the support against the roof to the next release and movement of the support. The concept has been validated through the back-analysis of more than 500 000 individual load cycles in five longwall panels at four mines and seven geotechnical domains. The validation process depended upon the development of new software capable of both handling the large quantity of data emanating from a modern longwall and accurately delineating load cycles. Existing software was found not to be capable of delineating load cycles to a sufficient accuracy. Load-cycle analysis can now be used quantitatively to assess the adequacy of support capacity and the appropriateness of set pressure for the conditions under which a longwall is being operated. When linked to a description of geotechnical conditions, this has allowed the development of a database for support selection for greenfield sites. For existing sites, the load-cycle characteristic concept allows for a diagnosis of strata-support problem areas, enabling changes to be made to set pressure and mining strategies to manage better, or avoid, strata control problems. With further development of the software, there is the prospect of developing a system that is able to respond to changes in strata-support interaction in real time.

Evaluation by respirometry of the degradability of retort water using a shale ash and overburden packed column

Oil shale processing produces an aqueous wastewater stream known as retort water. The fate of the organic content of retort water from the Stuart oil shale project (Gladstone, Queensland) is examined in a proposed packed bed treatment system consisting of a 1:1 mixture of residual shale from the retorting process and mining overburden. The retort water had a neutral pH and an average unfiltered TOC of 2,900 mg l(-1). The inorganic composition of the retort water was dominated by NH4+. Only 40% of the total organic carbon (TOC) in the retort water was identifiable, and this was dominated by carboxylic acids. In addition to monitoring influent and effluent TOC concentrations, CO2 evolution was monitored on line by continuous measurements of headspace concentrations and air flow rates. The column was run for 64 days before it blocked and was dismantled for analysis. Over 98% of the TOC was removed from the retort water. Respirometry measurements were confounded by CO2 production from inorganic sources. Based on predictions with the chemical equilibrium package PHREEQE, approximately 15% of the total CO2 production arose from the reaction of NH4+ with carbonates. The balance of the CO2 production accounted for at least 80% of the carbon removed from the retort water. Direct measurements of solid organic carbon showed that approximately 20% of the influent carbon was held-up in the top 20cm of the column. Less than 20% of this held-up carbon was present as either biomass or as adsorbed species. Therefore, the column was ultimately blocked by either extracellular polymeric substances or by a sludge that had precipitated out of the retort water.

Wills' mineral processing technology: an introduction to the practical aspects of ore treatment and mineral recovery

"Wills' Mineral Processing Technology" provides practising engineers and students of mineral processing, metallurgy and mining with a review of all of the common ore-processing techniques utilized in modern processing installations. Now in its Seventh Edition, this renowned book is a standard reference for the mineral processing industry. Chapters deal with each of the major processing techniques, and coverage includes the latest technical developments in the processing of increasingly complex refractory ores, new equipment and process routes. This new edition has been prepared by the prestigious J K Minerals Research Centre of Australia, which contributes its world-class expertise and ensures that this will continue to be the book of choice for professionals and students in this field. This latest edition highlights the developments and the challenges facing the mineral processor, particularly with regard to the environmental problems posed in improving the efficiency of the existing processes and also in dealing with the waste created. The work is fully indexed and referenced. -The classic mineral processing text, revised and updated by a prestigious new team -Provides a clear exposition of the principles and practice of mineral processing, with examples taken from practice -Covers the latest technological developments and highlights the challenges facing the mineral processor -New sections on environmental problems, improving the efficiency of existing processes and dealing with waste.

Applications of the Jameson cell at the head of base metal flotation circuits

The Jameson Cell is a high intensity flotation device, which utilises induced air from the atmosphere. It was developed jointly by Mount Isa Mines and Professor Graeme Jameson of the University of Newcastle in the 1980s. It is proven to generate fine bubbles, in the order of 300 to 500 µm, in a high intensity, high shear and compact zone contained in the downcomer. This aerated mixture exits the downcomer into the pulp zone, which is the quiescent mineral and gangue separation zone. A number of Australian base metal flotation circuits feature a reverse flotation stage at the head of the circuit. Testwork and plant operating data has shown that the use of a Jameson Cell in the prefloat cleaner application has further improved prefloat gangue recovery and selectivity. Operation of a Jameson Cell in a carbonaceous/pyrite prefloat cleaner duty at the Mt Isa copper concentrator increased copper recovery and reduced pyrite in the copper concentrate. Testwork at Zinifex Century Zinc Mine showed a decrease in zinc losses by the utilisation of Jameson Cell prefloat cleaner. Appraisal of a Jameson Cell in a scalping role within the Mt Isa Copper Concentrator indicated significant benefits could be achieved.

A computational approach to measuring the correlation between expertise and social media influence for celebrities on microblogs

Existing approaches of social influence analysis usually focus on how to develop effective algorithms to quantize users' influence scores. They rarely consider a person's expertise levels which are arguably important to influence measures. In this paper, we propose a computational approach to measuring the correlation between expertise and social media influence, and we take a new perspective to understand social media influence by incorporating expertise into influence analysis. We carefully constructed a large dataset of 13,684 Chinese celebrities from Sina Weibo (literally 'Sina microblogging'). We found that there is a strong correlation between expertise levels and social media influence scores. In addition, different expertise levels showed influence variation patterns: high-expertise celebrities have stronger influence on the 'audience' in their expertise domains.

Regional growth, structural change, and natural disaster

Hurricanes, earthquakes, floods, and other serious natural hazards have been attributed with causing changes in regional economic growth, income, employment, and wealth. Natural disasters are said to cause; (1) an acceleration of existing economic trends; (2) an expansion of employment and income, due to recovery operations (the so-called silver lining); and (3) an alteration in the structure of regional economic activity due to changes in "intra" and "inter" regional trading patterns, and technological change.^ Theoretical and stylized disaster simulations (Cochrane 1975; Haas, Cochrane, and Kates 1977; Petak et al. 1982; Ellson et al. 1983, 1984; Boisvert 1992; Brookshire and McKee 1992) point towards a wide scope of possible negative and long lasting impacts upon economic activity and structure. This work examines the consequences of Hurricane Andrew on Dade County's economy. Following the work of Ellson et al. (1984), Guimaraes et al. (1993), and West and Lenze (1993; 1994), a regional econometric forecasting model (DCEFM) using a framework of "with" and "without" the hurricane is constructed and utilized to assess Hurricane Andrew's impact on the structure and level of economic activity in Dade County, Florida.^ The results of the simulation exercises show that the direct economic impact associated with Hurricane Andrew on Dade County is of short duration, and of isolated sectoral impact, with impact generally limited to construction, TCP (transportation, communications, and public utilities), and agricultural sectors. Regional growth, and changes in income and employment reacted directly to, and within the range and direction set by national economic activity. The simulations also lead to the conclusion that areal extent, infrastructure, and sector specific damages or impacts, as opposed to monetary losses, are the primary determinants of a disaster's effects upon employment, income, growth, and economic structure. ^

Synthesis of copper carbon nanotube composite and its electrical conductivity measurement

The matrices in which Multi Walled Carbon Nanotubes (MWCNTs) are incorporated to produce composites with improved electrical properties can be polymer, metal or metal oxide. Most composites containing CNTs are polymer based because of its flexibility in fabrication. Very few investigations have been focused on CNT-metal composites due to fabrication difficulties, such as achievement of homogeneous distribution of MWCNTs and poor interfacial bonding between MWCNTs and the metal matrix. In an effort to overcome poor interfacial bonding for the Cu - MWCNT composite, silver (Ag) and nickel (Ni) resinates have been incorporated in the ball milling stage. Composites of MWCNT (16, 12, and 8 Vol %) - Cu+Ag+Ni were pelleted at 20,000 psi (669.4 Mpa) and sintered at 950 °C. The electrical conductivity results measured by four probe meter showed that the conductivity decreases with increase in the porosity. Moreover from these results it can also be stated that an addition of optimum value of (12 Vol %) MWCNT leads to high electrical conductivity (9.26E+07 s-m"), which is 50% greater than the conductivity of Cu. It is anticipated that the conductivity can be increased substantially with hot isostatic pressing of the pellet.

Mineralogy, mineral chemistry, and genesis of precious metal-bearing volcanogenic massive sulfide deposits in the Newfoundland Appalachians, Canada: the Ming deposit as example

The Ming deposit, Newfoundland Appalachians, is a metamorphosed (upper greenschist to lower amphibolite facies), Cambro-Ordovician, bimodalmafic volcanogenic massive sulfide (VMS) deposit that consists of several, spatially-associated, elongated orebodies composed of stratabound semimassive to massive sulfides and/or discordant sulfide stringers in a rhyodacitic footwall. Copper is the main commodity; however, the deposit contains precious metal-bearing zones with elevated Au grades. In this study, field observations, microscopy, and micro-analytical tools including electron microprobe, laser ablation inductively coupled plasma mass spectrometry, and secondary ion mass spectrometry were used to constrain the relative timing of precious metal emplacement, the physico-chemical conditions of hydrothermal fluid precipitation, and the sources of sulfur, precious metals, semi-metals and metals. The ore mineral assemblage is complex and indicates an intermediate sulfidation state. Pyrite and chalcopyrite are the dominant ore minerals with minor sphalerite and pyrrhotite, and trace galena, arsenopyrite and cubanite. Additional trace phases include tellurides, NiSb phases, sulfosalts, electrum, AgHg±Au alloys, and oxides. Silver phases and precious metals occur predominantly in semi-massive and massive sulfides as free grains, and as grains spatially associated with arsenopyrite and/or sulfosalts. Precious metal phases occurring between recrystallized pyrite and within cataclastic pyrite are rare. Hence, the complex ore assemblage and textures strongly suggest syngenetic precious metal emplacement, whereas metamorphism and deformation only internally and locally remobilized precious metal phases. The ore assemblage formed from reduced, acidic hydrothermal fluids over a range of temperatures (≈350 to below 260ºC). The abundance of telluride and Ag-bearing tetrahedrite, however, varies strongly between the different orebodies indicating variable ƒTe₂, ƒSe₂, mBi, and mSb within the hydrothermal fluids. The variations in the concentrations of semi-metals and metals (As, Bi, Hg, Sb, Se, Te), as well as Au and Ag, were due to variations in temperature but also to a likely contribution of magmatic fluids into the VMS hydrothermal system from presumably different geothermal reservoirs. Sulfur isotope studies indicate at least two sulfur sources: sulfur from thermochemically-reduced seawater sulfate and igneous sulfur. The source of igneous sulfur is the igneous footwall, direct magmatic fluid/volatiles, or both. Upper greenschist to lower amphibolite metamorphic conditions and deformation had no significant effect on the sulfur isotope composition of the sulfides at the Ming deposit.

Castles in the air: the life, times and influence of the Reverend Moses Harvey (1820-1901).

The period from 1874 to 1901 was a time of significant transition in the economic and political life of Newfoundland. Twenty years into responsible government and with Confederation on the backburner, the colony’s politicians turned their attention to economic diversification, landward development and carving out the island’s place in the British Empire. The period saw both economic prosperity and retrenchment; the construction of a trans-insular railway; the adoption of policies to foster agriculture, forestry, manufacturing and mining; and diplomatic efforts to resolve France’s outstanding claims on the northwest coast of the island. At the same time, the government made an attempt to intervene directly in its primary industry, the fisheries. It created a Fisheries Commission in 1889 that recommended conservation measures and artificial propagation as ways to restore the health of some of the island’s fish stocks. They also proposed new methods of curing, packaging and marketing Newfoundland’s cod, as well as a complete overhaul of the truck system. A major player in both the public and private debates surrounding all of these subjects was the Reverend Moses Harvey. Along with being minister of the Free Church of Scotland in St. John’s, Harvey was one of Newfoundland’s most active promoters in the late nineteenth century. He served as the media mouthpiece for both Prime Minister William Whiteway and Prime Minister Robert Thorburn; editing the Evening Mercury – the official organ of the Liberal Party and then the Reform Party – from 1882 to 1883 and 1885 until 1890. As well, Harvey wrote regular columns on Newfoundland issues for newspapers in London, New York, Boston, Montreal, Toronto, and Halifax. He also produced numerous books, articles, encyclopedia entries, and travel guides outlining the island’s attractions and its vast economic potential. In short, Harvey made a significant contribution in shaping the way residents and the outside world viewed Newfoundland during this period. This thesis examines late nineteenth-century Newfoundland through the writing of Moses Harvey. The biographical approach offers a fuller, more nuanced account of some of the major historical themes of the period including the politics of progress, opening up the interior, railway construction and attitudes toward the fisheries. It also provides an insider’s prospective on what led to some of the major political decisions, policy positions or compromises taken by the Whiteway and Thorburn governments. Finally, a more detailed review of Harvey’s work exposes the practical and political differences that he had with people like D.W. Prowse and Bishop Michael Howley. While these so-called “boomers” in Newfoundland’s historiography agreed on broad themes, they parted ways over what should be done with the fisheries and how best to channel the colony’s growing sense of nationalism.