A new plant growth system rig based on thermodynamic solar energy: a study for energy efficiency assessment

At the present there is a high pressure toward the improvement of all production processes. Those improvements can target distinct factors along the production chain. In particular, and due to recent tight energy efficiency policies, those that involve energy efficiency. As can be expected, agricultural processes are not immune to this tendency. Even more when dealing with indoor productions. In this context, this work presents an innovative system that aims to improve the energy efficiency of a trees growing platform. This improvement in energy consumption is accomplished by replacing an electric heating system by one based on thermodynamic panels. The assessment of the heating fluid caudal and its temperature was experimentally obtained by means of a custom made scaled prototype whose actuators status are commanded by a Fuzzy-based controller. The obtained results suggest that the change in the heating paradigm will lead to overall savings that can easily reach 60% on the energy bill.

Effects of Drive Speed Modulation on Dynamics of Slender Rotating Structures

Slender rotating structures are used in many mechanical systems. These structures can suffer from undesired vibrations that can affect the components and safety of a system. Furthermore, since some these structures can operate in a harsh environment, installation and operation of sensors that are needed for closed-loop and collocated control schemes may not be feasible. Hence, the need for an open-loop non-collocated scheme for control of the dynamics of these structures. In this work, the effects of drive speed modulation on the dynamics of slender rotating structures are studied. Slender rotating structures are a type of mechanical rotating structures, whose length to diameter ratio is large. For these structures, the torsion mode natural frequencies can be low. In particular, for isotropic structures, the first few torsion mode frequencies can be of the same order as the first few bending mode frequencies. These situations can be conducive for energy transfer amongst bending and torsion modes. Scenarios with torsional vibrations experienced by rotating structures with continuous rotor-stator contact occur in many rotating mechanical systems. Drill strings used in the oil and gas industry are an example of rotating structures whose torsional vibrations can be deleterious to the components of the drilling system. As a novel approach to mitigate undesired vibrations, the effects of adding a sinusoidal excitation to the rotation speed of a drill string are studied. A portion of the drill string located within a borewell is considered and this rotating structure has been modeled as an extended Jeffcott rotor and a sinusoidal excitation has been added to the drive speed of the rotor. After constructing a three-degree-of-freedom model to capture lateral and torsional motions, the equations of motions are reduced to a single differential equation governing torsional vibrations during continuous stator contact. An approximate solution has been obtained by making use of the Method of Direct Partition of Motions with the governing torsional equation of motion. The results showed that for a rotor undergoing forward or backward whirling, the addition of sinusoidal excitation to the drive speed can cause an increase in the equivalent torsional stiffness, smooth the discontinuous friction force at contact, and reduce the regions of negative slope in the friction coefficient variation with respect to speed. Experiments with a scaled drill string apparatus have also been conducted and the experimental results show good agreement with the numerical results obtained from the developed models. These findings suggest that the extended Jeffcott rotordynamics model can be useful for studies of rotor dynamics in situations with continuous rotor-stator contact. Furthermore, the results obtained suggest that the drive speed modulation scheme can have value for attenuating drill-string vibrations.

Tecnologia e funcionalidade das peças esquiroladas do Paleolítico Superior de Vale Boi, Vila do Bispo

Dissertação de Mestrado, Arqueologia, Faculdade de Ciências Humanas e Sociais, Universidade do Algarve, 2016

Synthesis of 3,5-Disubstituted Isoxazoles and Isoxazolines in Deep Eutectic Solvents

The synthesis of different 3,5-disubstituted isoxazoles and related isoxazolines using choline chloride:urea as deep eutectic solvent (DES) in a one-pot three step reaction has been accomplished successfully. The use of highly nucleophilic functionalized DES did not affect the process where highly electrophilic reagents or intermediates are involved. The presence of DES showed to be essential since the reaction in absence of this media did not proceed. The DES media could be reused up to five times without a detrimental effect on the yield of the reaction. To exemplify the synthetic potential of this methodology, the reaction was scaled up to the gram scale without any noticeable problem. Finally, different isoxazoles were easily transformed into β-aminoenones.

Defumação da tilápia do Nilo (Oreochromis niloticus) inteira eviscerada e filé: aspectos referentes às características organolépticas, composição centesimal e perdas ocorridas no processamento

O objetivo do experimento foi avaliar o efeito da defumação da tilápia do Nilo (Oreochromis niloticus) inteira eviscerada e filé sobre as características organolépticas (aparência, aroma, cor, sabor, textura, teor de sal e aceitação geral), a porcentagem de perda de peso (PP) e composição centesimal. Foram comparados FP1 (peixe inteiro eviscerado, 5 horas de fumaça) e FP2 (filé, 4 horas de fumaça). Os peixes foram descamados, eviscerados, para obtenção de FP1 ou filetados por uma única pessoa, para obtenção de FP2, e então submetidos à salmouragem úmida (30%) e à defumação. O rendimento médio para FP1 e FP2 foi de 63,98 e 27,11%, respectivamente. O valor médio para porcentagem de perda de peso ocorrida na defumação para o filé (31,33%) foi superior ao peixe inteiro (27,04%). A análise sensorial revelou que o peixe inteiro teve melhor aceitação quanto ao sabor e teor de sal e não diferiu do filé quanto ao aroma, cor e textura. O processo de defumação reduziu o conteúdo de umidade e proporcionou aumento nos teores de proteína bruta, lipídios e cinzas. As perdas foram maiores para o filé, que apresentou maior teor de proteína bruta e menor teor de lipídios comparado ao peixe inteiro. Verificou-se também que o sabor do filé pode ser melhorado em função de uma correção na salmouragem.

Switching Patterns and Steady-State Analysis of Grid-Connected and Stand-Alone Single-Stage Boost-Inverters for PV Applications

Renewable or sustainable energy (SE) sources have attracted the attention of many countries because the power generated is environmentally friendly, and the sources are not subject to the instability of price and availability. This dissertation presents new trends in the DC-AC converters (inverters) used in renewable energy sources, particularly for photovoltaic (PV) energy systems. A review of the existing technologies is performed for both single-phase and three-phase systems, and the pros and cons of the best candidates are investigated. In many modern energy conversion systems, a DC voltage, which is provided from a SE source or energy storage device, must be boosted and converted to an AC voltage with a fixed amplitude and frequency. A novel switching pattern based on the concept of the conventional space-vector pulse-width-modulated (SVPWM) technique is developed for single-stage, boost-inverters using the topology of current source inverters (CSI). The six main switching states, and two zeros, with three switches conducting at any given instant in conventional SVPWM techniques are modified herein into three charging states and six discharging states with only two switches conducting at any given instant. The charging states are necessary in order to boost the DC input voltage. It is demonstrated that the CSI topology in conjunction with the developed switching pattern is capable of providing the required residential AC voltage from a low DC voltage of one PV panel at its rated power for both linear and nonlinear loads. In a micro-grid, the active and reactive power control and consequently voltage regulation is one of the main requirements. Therefore, the capability of the single-stage boost-inverter in controlling the active power and providing the reactive power is investigated. It is demonstrated that the injected active and reactive power can be independently controlled through two modulation indices introduced in the proposed switching algorithm. The system is capable of injecting a desirable level of reactive power, while the maximum power point tracking (MPPT) dictates the desirable active power. The developed switching pattern is experimentally verified through a laboratory scaled three-phase 200W boost-inverter for both grid-connected and stand-alone cases and the results are presented.

Use of Fiber Reinforced Polymer Composite Cable for Post-tensioning Application

Corrosion of steel tendons is a major problem for post-tensioned concrete, especially because corrosion of the steel strands is often hard to detect inside grouted ducts. Non-metallic tendons can serve as an alternative material to steel for post-tensioning applications. Carbon fiber reinforced polymer (CFRP), given its higher strength and elastic modulus, as well as excellent durability and fatigue strength, is the most practical option for post-tensioning applications. The primary objective of this research project was to assess the feasibility of the use of innovative carbon fiber reinforced polymer (CFRP) tendons and to develop guidelines for CFRP in post-tensioned bridge applications, including segmental bridges and pier caps. An experimental investigation and a numerical simulation were conducted to compare the performance of a scaled segmental bridge model, post-tensioned with two types of carbon fiber strands and steel strands. The model was tested at different prestress levels and at different loading configurations. While the study confirms feasibility of both types of carbon fiber strands for segmental bridge applications, and their similar serviceability behavior, strands with higher elastic modulus could improve structural performance and minimize displacements beyond service loads. As the second component of the project, a side-by-side comparison of two types of carbon fiber strands against steel strands was conducted in a scaled pier cap model. Two different strand arrangements were used for post-tensioning, with eight and six strands, respectively representing an over-design and a slight under-design relative to the factored demand. The model was tested under service and factored loads. The investigation confirmed the feasibility of using carbon fiber strands in unbonded post-tensioning of pier caps. Considering both serviceability and overload conditions, the general performance of the pier cap model was deemed acceptable using either type of carbon fiber strands and quite comparable to that of steel strands. In another component of this research, creep stress tests were conducted with carbon fiber composite cable (CFCC). The anchorages for all the specimens were prepared using a commercially available expansive grout. Specimens withstood 95% of the guaranteed capacity provided by the manufacturer for a period of five months, without any sign of rupture.

Temporal solitonic crystals and non-Hermitian informational lattices

Clusters of temporal optical solitons—stable self-localized light pulses preserving their form during propagation—exhibit properties characteristic of that encountered in crystals. Here, we introduce the concept of temporal solitonic information crystals formed by the lattices of optical pulses with variable phases. The proposed general idea offers new approaches to optical coherent transmission technology and can be generalized to dispersion-managed and dissipative solitons as well as scaled to a variety of physical platforms from fiber optics to silicon chips. We discuss the key properties of such dynamic temporal crystals that mathematically correspond to non-Hermitian lattices and examine the types of collective mode instabilities determining the lifetime of the soliton train. This transfer of techniques and concepts from solid state physics to information theory promises a new outlook on information storage and transmission.

Do health care providers use online patient ratings to improve the quality of care?

Background: Physician-rating websites have become a popular tool to create more transparency about the quality of health care providers. So far, it remains unknown whether online-based rating websites have the potential to contribute to a better standard of care. Objective: Our goal was to examine which health care providers use online rating websites and for what purposes, and whether health care providers use online patient ratings to improve patient care. Methods: We conducted an online-based cross-sectional study by surveying 2360 physicians and other health care providers (September 2015). In addition to descriptive statistics, we performed multilevel logistic regression models to ascertain the effects of providers' demographics as well as report card-related variables on the likelihood that providers implement measures to improve patient care. Results: Overall, more than half of the responding providers surveyed (54.66%, 1290/2360) used online ratings to derive measures to improve patient care (implemented measures: mean 3.06, SD 2.29). Ophthalmologists (68%, 40/59) and gynecologists (65.4%, 123/188) were most likely to implement any measures. The most widely implemented quality measures were related to communication with patients (28.77%, 679/2360), the appointment scheduling process (23.60%, 557/2360), and office workflow (21.23%, 501/2360). Scaled-survey results had a greater impact on deriving measures than narrative comments. Multilevel logistic regression models revealed medical specialty, the frequency of report card use, and the appraisal of the trustworthiness of scaled-survey ratings to be significantly associated predictors for implementing measures to improve patient care because of online ratings. Conclusions: Our results suggest that online ratings displayed on physician-rating websites have an impact on patient care. Despite the limitations of our study and unintended consequences of physician-rating websites, they still may have the potential to improve patient care.

La régulation de la transcription dans les cellules cancéreuses

La chromatine eucaryote, contenant l’ADN et de nombreuses protéines de liaison, subit une compaction dynamique et fonctionnelle à de multiples échelles, nécessaire pour la régulation de nombreux processus biologiques comme l’expression génique. Afin de définir et maintenir les fonctions cellulaires, les protéines de la régulation transcriptionnelle et de la régulation de la structure chromatinienne agissent de concert pour orchestrer les programmes d’expression génique des cellules. Les facteurs de transcription opèrent de manière combinée et hiérarchique au niveau de nombreux éléments régulateurs, dont le fonctionnement est complexe et intégré, capables de générer de larges boucles topologiques pour réguler spécifiquement un promoteur cible à un moment précis. Le co-activateur transcriptionnel Mediator sert de centre d’interprétation, en connectant physiquement les régulateurs de la transcription à la machinerie transcriptionnelle, pour générer une réponse calibrée. Le complexe de maintenance de la structure des chromosomes, Cohesin, est impliqué dans la formation et la stabilisation des connexions génomiques à l’échelle de nombreuses structures chromatiniennes tri-dimensionnelles dont la caractérisation fonctionnelle commence à être explorée. Ensemble, les facteurs de transcription, Mediator et Cohesin contrôlent l’expression des programmes responsables du maintien de l’identité cellulaire. Les cellules cancéreuses présentent de nombreuses dérégulations au niveau transcriptionnel, et donc un programme d’expression aberrant. Nous avons démontré que les mécanismes de régulation qui contrôlent les cellules cancéreuses sont conservés, et proposons une stratégie qui permette de révéler les facteurs clefs dans la progression tumorale. Nous avons appliqué cette stratégie à la problématique de la résistance endocrinienne dans la progression du cancer du sein hormono-dépendant. Les résultats obtenus suggèrent que le complexe transcriptionnel AP-1 pourrait être impliqué dans l’acquisition et/ou le maintien de la résistance, en réponse aux pressions de sélection induites par les traitements hormonaux. Nous proposons une adaptation progressive et agressive des cellules cancéreuses par re-hiérarchisation des facteurs clefs qui contrôlent sa croissance.

Validity and reliability of the international fItness scale (IFIS) in a population-based sample of schoolchildren in Bogota, Colombia: The FUPRECOL study

The International FItness Scale (IFIS) is a self-reported measure of physical fitness that could easily. This scale has been validated in children, adolescents, and young adults; however, it is unknown whether the IFIS represents a valid and reliable estimate of physical fitness in Latino-American youth population. In the present study we aimed to examine the validity and reliability of the IFIS on a population-based sample of schoolchildren in Bogota, Colombia. Participants were 1,875 Colombian youth (56.2% girls) aged 9 to 17.9 years old. We measured adiposity markers (body fat, waist-to-height ratio, skinfold thicknesses and BMI), blood pressure, lipids profile, fasting glucose, and physical fitness level (self reported and measured). Also, a validated cardiometabolic risk index was used. An age- and sex-matched sample of 229 Schoolchildren originally not included in the study sample fulfilled IFIS twice for reliability purposes. Our data suggest that both measured and self-reported overall fitness were associated inversely with adiposity indicators and a cardiometabolic risk score. Overall, schoolchildren who self-reported “good” and “very good” fitness had better measured fitness than those who reported “very poor” and “poor” fitness (all p<0.001). Test–retest reliability of IFIS items was also good, with an average weighted Kappa of 0.811. Therefore, our findings suggest that self-reported fitness, as assessed by IFIS, is a valid, reliable, and health-related measure, and it can be a good alternative for future use in large studies with Latin-schoolchildren from Colombia.

Local Understandings of Soil Fertility, Rainfall and Conservation Agriculture in Laikipia, Kenya: A Qualitative Analysis.

Conservation Agriculture (CA) is mostly referred to in the literature as having three principles at the core of its identity: minimum soil disturbance, permanent organic soil cover and crop diversity. This farming package has been described as suitable to improve yields and livelihoods of smallholders in semi-arid regions of Kenya, which since the colonial period have been heavily subjected to tillage. Our study is based on a qualitative approach that followed local meanings and understandings of soil fertility, rainfall and CA in Ethi and Umande located in the semi-arid region of Laikipia, Kenya. Farm visits, 53 semistructured interviews, informal talks were carried out from April to June 2015. Ethi and Umande locations were part of a resettlement programme after the independence of Kenya that joined together people coming from different farming contexts. Since the 1970–80s, state and NGOs have been promoting several approaches to control erosion and boost soil fertility. In this context, CA has also been promoted preferentially since 2007. Interviewees were well acquainted with soil erosion and the methods to control it. Today, rainfall amount and distribution are identified as major constraints to crop performance. Soil fertility is understood as being under control since farmers use several methods to boost it (inorganic fertilisers, manure, terraces, agroforestry, vegetation barriers). CA is recognised to deliver better yields but it is not able to perform well under severe drought and does not provide yields as high as ‘promised’ in promotion campaigns. Moreover, CA is mainly understood as “cultivating with chemicals”, “kulima na dawa”, in kiswahili. A dominant view is that CA is about minimum tillage and use of pre-emergence herbicides. It is relevant to reflect about what kind of CA is being promoted and if elements like soil cover and crop rotation are given due attention. CA based on these two ideas, minimum tillage and use of herbicides, is hard to stand as a programme to be promoted and up-scaled. Therefore CA appears not to be recognised as a convincing approach to improve the livelihoods in Laikipia.

A multiscale multisurface constitutive model for the thermo-plastic behavior of polyethylene

We present a multiscale model bridging length and time scales from molecular to continuum levels with the objective of predicting the yield behavior of amorphous glassy polyethylene (PE). Constitutive pa- rameters are obtained from molecular dynamics (MD) simulations, decreasing the requirement for ad- hoc experiments. Consequently, we achieve: (1) the identification of multisurface yield functions; (2) the high strain rate involved in MD simulations is upscaled to continuum via quasi-static simulations. Validation demonstrates that the entire multisurface yield functions can be scaled to quasi-static rates where the yield stresses are possibly predicted by a proposed scaling law; (3) a hierarchical multiscale model is constructed to predict temperature and strain rate dependent yield strength of the PE.

Spatial variability of satured soil hydraulic conductivity in the region of Araguaia River - Brazil.

This study evaluates the spatial variability of saturated hydraulic conductivity in the soil in an area of 51,850 ha at the headwaters of the Araguaia River MT/GO. This area is highly vulnerable because it is a location of recharging through natural water infiltration of the Guarani Aquifer System and an area of intense increases in agriculture since its adoption by growers in the last 30 years. Soil samples were collected at 383 points, geographically located by GPS. The samples were collected from depths of 0 - 20 cm and 60 - 80 cm. Exploratory statistics and box-plot were used in the descriptive analysis and semivariogram were constructed to determine the spatial model. The exploratory analysis showed that the mean hydraulic conductivity in the superficial layer was less than at the level of 60-80 cm; however, the greatest variability evaluated with a coefficient of variation also was from this layer. Data tended towards a normal distribution. These results can be explained by the greater soil compaction in the superficial layer. The semivariogram models, adjusted for the two layers, were exponential and demonstrated moderate and strong dependence, with ranges of 5000 and 3000 utm respectively. It was concluded that soil use is influencing the spatial distribution model of the hydraulic conductivity in the region.

Chemical and aromatic characteristics of Brazilian tropical wines.

Traditional winegrowing areas are located in temperate climate zones and allow to produce grapes only once per year. Tropical wines have been elaborated in India, Thailand, Venezuela and Brazil and present another kind of viticulture, as compared with countries located in temperate climate zones. Northeast of Brazil started wine production twenty six years ago. This region vines can produce two or three crops per year, depending of the cycle of different cultivars. Harvests can be scaled throughout the year, mainly between May and December, corresponding to the dry season. Red, white, rosé and sparkling wines are being elaborated in the region. The objective of this work was to determine the physico-chemical and aromatic characteristics of some tropical wines elaborated in Northeast of Brazil, with grapes harvested in November 2008. Wines were elaborated using traditional method with control of the alcoholic and malolactic fermentation temperatures, at 25 and 18ºC for red wines, respectively, and at 18ºC for alcoholic fermentation of the white wines. After stabilization and bottling and wines were analyzed to determine physico-chemical characteristics, like alcohol degree, pH, total and volatile acidities, dry extract, sulfur dioxide, total anthocyanin and total phenol index. Aromatic profile was determined by gas chromatography, while 19 esters and 6 superior alcohols were identified. Wines presented different chemical and aromatic characteristics according to different grape cultivars.