Evolução da linha de costa e morfologia atual do Delta do Valo Grande, Litoral Sudeste do Brasil

O sistema estuarino‐lagunar de Cananéia‐Iguape, localizado no sul do Estado de São Paulo, sudeste do Brasil, encerra um complexo de canais, associados a uma planície costeira, cuja evolução data dos eventos transgressivo‐regressivos do Quaternário superior e cujos processos sedimentares recentes foram dramaticamente alterados em função da atividade antrópica, nos últimos 150 anos, determinada, basicamente, pela abertura de um canal artificial, o Valo Grande. Uma análise de documentos cartográficos, dos últimos 100 anos (Commissão Geographica e Geologica do Estado de S. Paulo, 1914; Freitas, 2005; Nascimento Jr et al., 2008), além de imagens de satélites, revela que, após a abertura do Valo Grande, houve uma enorme intensificação no processo sedimentar de parte do sistema lagunar, em função, não somente da erosão das margens do canal artificial mas, também, por conta do aumento expressivo sedimentos para o sistema estuarino‐lagunar, levando à formação de um “delta intra‐lagunar antropogênico” (“man‐made intra‐lagoonal delta”) cuja evolução e morfologia atual estão sendo investigados.

Antropología de las relaciones transnacionales en las regiones de frontera. El caso de la Triple Frontera entre Argentina, Brasil, Paraguay. 16H363

La triple frontera entre Argentina, Brasil y Paraguay, concebida como una amplia región con epicentro en la red urbana Puerto Iguazú, Foz do Iguazú y Ciudad del Este y otras localidades satélites, y que reconoce, además, dos puntos de gran importancia como Posadas/Encarnación y Bernardo de Irigoyen/Dionisio Cerqueira, comprende en realidad, un territorio muchos más vasto que abarca la provincia argentina de Misiones, la zona occidentalde los estados del sur de Brasil y el sur de Mato Grosso do Sul y el este de Paraguay. En este espacio tienen lugar múltiples relaciones transnacionales: económicas, políticas, sociales, culturales, etcétera que poseen una dilatada historia pero que, a partir de la integración y el MERCOSUR adquirieron una complejidad y densidad en permanente crecimiento y además, el surgimiento de procesos emergentes cuyo conocimiento supone un imperativo ineludible. Hemos investigado en los proyectos anteriores, ocho en total, los dos niveles en los que consideramos deben estudiarse estos procesos. Un nivel de escala mayor que trata de comprender la complejidad de una formación socioeconómica y espacial transnacional y su lugar en el ajedrez nacional e internacional del sistema imperial y, otro nivel, consistente en la profundización de problemas específicos de la región fronteriza como: redes sociales, mercado de trabajo, migraciones, exilio, solidaridad y lucha, movimientos sociales, gestión de ecosistemas compartidos, proyectos de desarrollo comunes, foros de esclarecimiento y defensa regionales, e integración del conocimiento.

Modelo comportamental do capacitor ferroelétrico como unidade básica de neurônios artificiais e sua implementação em FPGA

This work proposes the use of the behavioral model of the hysteresis loop of the ferroelectrics capacitor as a new alternative to the usually costly techniques in the computation of nonlinear functions in artificial neurons implemented on reconfigurable hardware platform, in this case, a FPGA device. Initially the proposal has been validated by the implementation of the boolean logic through the digital models of two artificial neurons: the Perceptron and a variation of the model Integrate and Fire Spiking Neuron, both using the model also digital of the hysteresis loop of the ferroelectric capacitor as it’s basic nonlinear unit for the calculations of the neurons outputs. Finally, it has been used the analog model of the ferroelectric capacitor with the goal of verifying it’s effectiveness and possibly the reduction of the number of necessary logic elements in the case of implementing the artificial neurons on integrated circuit. The implementations has been carried out by Simulink models and the synthesizing has been done through the DSP Builder software from Altera Corporation.

Estudo sobre a relação entre a atividade geomagnética e cintilações de sinais de GPS em Natal-RN (Brasil)

To identify the relationship between GPS scintillation in Natal-RN (Brazil) and geomagnetic disturbances of any intensities and variations, this work made analysis of the ionospheric behavior and magnetic indexes (Dst , AE and Bz of the interplanetary magnetic field) concerning to different periods of the solar cycle between 2000 and 2014. Part of the data of this research originated at the UFRN observatory, from a GEC Plessey board connected to an ANP -C 114 antenna, modified by Cornell University’s Space group Plasma Physics in order to operate the ScintMon, a GPS monitoring program. This study, therefore, found several cases of inhibited scintillations after the main phase of magnetic storms, a fact that, along with others, corroborated with categorization of Aarons (1991) and models of disturbed dynamo (according to Bonelli, 2008) and over-shielding penetration, defended by Kelley et al. (1979) and Abdu (2011) [4]. In addition to these findings, different morphologies were noted in such disruptions in the GPS signal in accordance with previous magnetic activities. It also found a moderate relationship (R2 = 0.52) between the Dst rate (concerning to specific time) and the average of S4 through a polynomial function. This finding therefore, corroborating Ilma et al. (2012) [17], is an important evidence that the scintillation GPS are not directly controlled by magnetic induction of storms. Completing this work, this relation did show itself as a way of partial predicting of scintillations.

Cálculo das incertezas climáticas sobre América do Sul utilizando modelos do CMIP5: aferição através das redes neurais artificiais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evoluções nas modelagens de substratos artificiais (metamateriais) com práticas experimentais em antenas de microfita

Esse trabalho tem como objetivo apresentar configurações de substratos dielétricos inovadores projetados e fabricados a partir de estruturas metamateriais. Para isso, são avaliados diversos fatores que podem influenciar no seu desempenho. A princípio, foi feito um levantamento bibliográfico a respeito dos temas, que estão relacionados com as pesquisas sobre: materiais dielétricos, metamateriais e interferometria óptica. São estudados, pesquisados e desenvolvidos dois projetos experimentais propostos, que comprovam a eficiência de métodos, para se alcançar a permeabilidade magnética negativa na formação de metamateriais. O primeiro projeto é a produção de uma nova estrutura, com u anel ressoador triangular equilateral (Split Equilateral Triangle Resonator - SETR). O segundo projeto: aplica os princípios da interferometria óptica, especialmente, com o interferômetro de Fabry-Perot. Técnicas para obtenção dos dispositivos que complementam a placa metamaterial como substrato foram pesquisadas na literatura e exemplificadas principalmente por meio de simulações e medições. Foram feitas comparações, simulações e medições de estruturas convencionais e especiais. As experiências se concentram nas evoluções e modelagens de substratos metamateriais com aplicações em antenas de microfita. As melhorias de alguns parâmetros de desempenho de antenas também são relatadas. As simulações das antenas foram feitas nos programas computacionais comerciais. Os resultados medidos foram obtidos com um analisador vetorial de redes da Rhode and Schwarz modelo ZVB 14.

Evoluções nas modelagens de substratos artificiais (metamateriais) com práticas experimentais em antenas de microfita

Esse trabalho tem como objetivo apresentar configurações de substratos dielétricos inovadores projetados e fabricados a partir de estruturas metamateriais. Para isso, são avaliados diversos fatores que podem influenciar no seu desempenho. A princípio, foi feito um levantamento bibliográfico a respeito dos temas, que estão relacionados com as pesquisas sobre: materiais dielétricos, metamateriais e interferometria óptica. São estudados, pesquisados e desenvolvidos dois projetos experimentais propostos, que comprovam a eficiência de métodos, para se alcançar a permeabilidade magnética negativa na formação de metamateriais. O primeiro projeto é a produção de uma nova estrutura, com u anel ressoador triangular equilateral (Split Equilateral Triangle Resonator - SETR). O segundo projeto: aplica os princípios da interferometria óptica, especialmente, com o interferômetro de Fabry-Perot. Técnicas para obtenção dos dispositivos que complementam a placa metamaterial como substrato foram pesquisadas na literatura e exemplificadas principalmente por meio de simulações e medições. Foram feitas comparações, simulações e medições de estruturas convencionais e especiais. As experiências se concentram nas evoluções e modelagens de substratos metamateriais com aplicações em antenas de microfita. As melhorias de alguns parâmetros de desempenho de antenas também são relatadas. As simulações das antenas foram feitas nos programas computacionais comerciais. Os resultados medidos foram obtidos com um analisador vetorial de redes da Rhode and Schwarz modelo ZVB 14.

Implementação de uma matriz de neurônios dinamicamente reconfigurável para descrição de topologias de redes neurais artificiais multilayer perceptrons

The Artificial Neural Networks (ANN), which is one of the branches of Artificial Intelligence (AI), are being employed as a solution to many complex problems existing in several areas. To solve these problems, it is essential that its implementation is done in hardware. Among the strategies to be adopted and met during the design phase and implementation of RNAs in hardware, connections between neurons are the ones that need more attention. Recently, are RNAs implemented both in application specific integrated circuits's (Application Specific Integrated Circuits - ASIC) and in integrated circuits configured by the user, like the Field Programmable Gate Array (FPGA), which have the ability to be partially rewritten, at runtime, forming thus a system Partially Reconfigurable (SPR), the use of which provides several advantages, such as flexibility in implementation and cost reduction. It has been noted a considerable increase in the use of FPGAs for implementing ANNs. Given the above, it is proposed to implement an array of reconfigurable neurons for topologies Description of artificial neural network multilayer perceptrons (MLPs) in FPGA, in order to encourage feedback and reuse of neural processors (perceptrons) used in the same area of the circuit. It is further proposed, a communication network capable of performing the reuse of artificial neurons. The architecture of the proposed system will configure various topologies MLPs networks through partial reconfiguration of the FPGA. To allow this flexibility RNAs settings, a set of digital components (datapath), and a controller were developed to execute instructions that define each topology for MLP neural network.

Implementação de uma matriz de neurônios dinamicamente reconfigurável para descrição de topologias de redes neurais artificiais multilayer perceptrons

The Artificial Neural Networks (ANN), which is one of the branches of Artificial Intelligence (AI), are being employed as a solution to many complex problems existing in several areas. To solve these problems, it is essential that its implementation is done in hardware. Among the strategies to be adopted and met during the design phase and implementation of RNAs in hardware, connections between neurons are the ones that need more attention. Recently, are RNAs implemented both in application specific integrated circuits's (Application Specific Integrated Circuits - ASIC) and in integrated circuits configured by the user, like the Field Programmable Gate Array (FPGA), which have the ability to be partially rewritten, at runtime, forming thus a system Partially Reconfigurable (SPR), the use of which provides several advantages, such as flexibility in implementation and cost reduction. It has been noted a considerable increase in the use of FPGAs for implementing ANNs. Given the above, it is proposed to implement an array of reconfigurable neurons for topologies Description of artificial neural network multilayer perceptrons (MLPs) in FPGA, in order to encourage feedback and reuse of neural processors (perceptrons) used in the same area of the circuit. It is further proposed, a communication network capable of performing the reuse of artificial neurons. The architecture of the proposed system will configure various topologies MLPs networks through partial reconfiguration of the FPGA. To allow this flexibility RNAs settings, a set of digital components (datapath), and a controller were developed to execute instructions that define each topology for MLP neural network.

Serious Game no tratamento de obesidade infantil: uma proposta de interação natural com monitoramento remoto

The number of overweight people has increased in the last few years. Factors such as attention to diet and changes in lifestyle are crucial in the prevention and control of obesity and diseases related to it. Experts believe that such actions are most effective when initiated during childhood, and that children raised in an environment that encourages physical activity ultimately become healthier adults. However, to arouse and maintain interest in such activities represent a major challenge, which are initially perceived as repetitive and boring, and, thus, soon abandoned. Computer games, traditionally seen as stimulants to a sedentary lifestyle are changing this perception using non-conventional controls that require constant movement of the player. Applications that combine the playfulness of such games to physical activity through devices, like Microsoft Kinect, might become interesting tools in this scenario, by using the familiarity of Natural User Interfaces along with the challenge and the fun of video games, in order to make attractive exercise routines for schoolchildren. The project carried out consists of an exergame composed of several activities designed and implemented with the participation of a Physical Educator, aimed at children between eight and ten years old, whose performance and progress can be remotely monitored by a professional via web interface. The application arising from this work was accompanied by tests with a group of graduating Physical Education students from the University of Rio Verde GO, and subsequently validated through questionnaires whose results are shown on this work.

Classificação de nódulos pulmonares em imagens tomográficas utilizando redes neurais artificiais em cascata

Lung cancer is the most common of malignant tumors, with 1.59 million new cases worldwide in 2012. Early detection is the main factor to determine the survival of patients affected by this disease. Furthermore, the correct classification is important to define the most appropriate therapeutic approach as well as suggest the prognosis and the clinical disease evolution. Among the exams used to detect lung cancer, computed tomography have been the most indicated. However, CT images are naturally complex and even experts medical are subject to fault detection or classification. In order to assist the detection of malignant tumors, computer-aided diagnosis systems have been developed to aid reduce the amount of false positives biopsies. In this work it was developed an automatic classification system of pulmonary nodules on CT images by using Artificial Neural Networks. Morphological, texture and intensity attributes were extracted from lung nodules cut tomographic images using elliptical regions of interest that they were subsequently segmented by Otsu method. These features were selected through statistical tests that compare populations (T test of Student and U test of Mann-Whitney); from which it originated a ranking. The features after selected, were inserted in Artificial Neural Networks (backpropagation) to compose two types of classification; one to classify nodules in malignant and benign (network 1); and another to classify two types of malignancies (network 2); featuring a cascade classifier. The best networks were associated and its performance was measured by the area under the ROC curve, where the network 1 and network 2 achieved performance equal to 0.901 and 0.892 respectively.

Proyecto Brasil 4D Interactividad en televisión pública

Este artículo presenta la experiencia inédita de ofrecer contenidos audiovisuales para televisión pública digital interactiva brasileña, posibilitando el “diálogo” entre audiencias y empresas por medio del control remoto y del sistema broadcasting. La experiencia de televisión digital interactiva es realizada por la Empresa Brasil de Comunicación (ebc) que, a través de la multiprogramación, creó un canal de servicios para atender a la población de bajos ingresos, asistida por el Programa Bolsa Familia. En 2013, la primera experiencia del proyecto Brasil 4D fue realizada con cien familias en João Pessoa, capital de la provincia de Paraíba, durante tres meses y, desde 2014, el proyecto está siendo desarrollado en Brasilia, Distrito Federal, con trescientas familias. El proyecto, que ofrece gratuitamente nuevos contenidos audiovisuales interactivos, mezcla innovación tecnológica, utilización de multiplataformas y multiprogramación, es desarrollado en software libre.

Sensoriamento óptico quase-distribuído aplicado ao monitoramento de trocadores de calor de usinas hidrelétricas

This work aims to develop optical sensors for temperature monitoring in hydroelectric power plant heat exchangers. The proposed sensors are based on the Fiber Bragg Gratings technology. First of all, a prototype with three sensors inscribed in a same fiber was developed. This fiber was then fixed to a conventional Pt100 sensor rod and inserted in a thermowell. The ensemble was then calibrated in a workbench, presenting a maximum combined uncertainty of 2,06 °C. The sensor was installed in one of the heat exchangers of the Salto Osório’s hydroelectric power plant. This power plant is situated in the Iguaçu river, at the Paraná state. Despite the satisfactory results, the sensor was improved to a second version. In this, fifteen optical Bragg sensors were inscribed in a same fiber. The fixation with a conventional sensor was no longer necessary, because the first version results comproved the efficiency and response time in comparison to a conventional sensor. For this reason, it was decided to position the fiber inside a stainless steel rod, due to his low thermal expansion coefficient and high corrosion immunity. The utilization of fifteen fiber Bragg gratings aims to improve the sensor spatial resolution. Therefore, measurements every ten centimeters with respect to the heat exchanger’s height are possible. This provides the generation of a thermal map of the heat exchanger’s surface, which can be used for determination of possible points of obstruction in the hydraulic circuit of the heat exchanger. The heat exchanger’s obstruction in hydroelectric power plants usually occur by bio-fouling, and has direct influence in the generator’s cooling system efficiency. The obtained results have demonstrated the feasibility in application of the optical sensors technology in hydroelectric power plants.