An accurate numerical scheme for the contraction of a bubble in a Hele-Shaw cell

We report on an accurate numerical scheme for the evolution of an inviscid bubble in radial Hele-Shaw flow, where the nonlinear boundary effects of surface tension and kinetic undercooling are included on the bubble-fluid interface. As well as demonstrating the onset of the Saffman-Taylor instability for growing bubbles, the numerical method is used to show the effect of the boundary conditions on the separation (pinch-off) of a contracting bubble into multiple bubbles, and the existence of multiple possible asymptotic bubble shapes in the extinction limit. The numerical scheme also allows for the accurate computation of bubbles which pinch off very close to the theoretical extinction time, raising the possibility of computing solutions for the evolution of bubbles with non-generic extinction behaviour.

Integrated genomic characterization of endometrial carcinoma

We performed an integrated genomic, transcriptomic and proteomic characterization of 373 endometrial carcinomas using array- and sequencing-based technologies. Uterine serous tumours and ∼25% of high-grade endometrioid tumours had extensive copy number alterations, few DNA methylation changes, low oestrogen receptor/progesterone receptor levels, and frequent TP53 mutations. Most endometrioid tumours had few copy number alterations or TP53 mutations, but frequent mutations in PTEN, CTNNB1, PIK3CA, ARID1A and KRAS and novel mutations in the SWI/SNF chromatin remodelling complex gene ARID5B. A subset of endometrioid tumours that we identified had a markedly increased transversion mutation frequency and newly identified hotspot mutations in POLE. Our results classified endometrial cancers into four categories: POLE ultramutated, microsatellite instability hypermutated, copy-number low, and copy-number high. Uterine serous carcinomas share genomic features with ovarian serous and basal-like breast carcinomas. We demonstrated that the genomic features of endometrial carcinomas permit a reclassification that may affect post-surgical adjuvant treatment for women with aggressive tumours.

Participatory approach to support community development of rural craftspeople

This paper presents a case study of the participatory project in the Jombang glass bead craft industry. Economic instability has brought significant business challenges in the community. The involvement of outsiders to collaborate with craftspeople in order to support business innovation as well as strengthen the social capital in the community is essential. However, facilitating a rural community to formulate and implement bottom-up planning needs an integrated approach. In this paper, we explain a participatory project in the rural craftspeople community that resulted in a collective action. The project aimed at uniting and empowering rural craftspeople focusing on the unique skills and knowledge of participants. There are some aspects influencing the success of collective action: the ability to understand the local political situation; the role of facilitators to respect and support the unique potential of craftspeople; and the economic benefit of the program.

Imagining neighbourhood-based community : an autoethnography

This research is an autoethnographic investigation of consumption experiences, public and quasi-public spaces, and their relationship to community within an inner city neighbourhood. The research specifically focuses on the gentrifying inner city, where class-based processes of change can have implications for people’s abilities to remain within, or feel connected to place. However, the thesis draws on broader theories of the throwntogetherness of the contemporary city (e.g., Amin and Thrift, 2002; Massey 2005) to argue that the city is a space where place-based meanings cannot be seen to be fixed, and are instead better understood as events of place – based on ever shifting interrelations between the trajectories of people and things. This perspective argues the experience of belonging to community is not just born of a social encounter, but also draws on the physical and symbolic elements of the context in which it is situated. The thesis particularly explores the ways people construct identifications within this shifting urban environment. As such, consumption practices and spaces offer one important lens through which to explore the interplay of the physical, social and symbolic. Consumer research tells us that consumption practices can facilitate experiences in which identity-defining meaning can be generated and shared. Consumption spaces can also support different kinds of collective identification – as anchoring realms for specific cultural groups or exposure realms that enable individuals to share in the identification practices of others with limited risk (Aubert-Gamet & Cova, 1999). Furthermore, the consumption-based lifestyles that gentrifying inner city neighbourhoods both support and encourage can also mean that consumption practices may be a key reason that people are moving through public space. That is, consumption practices and spaces may provide a purpose for which – and spatial frame against which – our everyday interactions and connections with people and objects are undertaken within such neighbourhoods. The purpose of this investigation then was to delve into the subjectivities at the heart of identifying with places, using the lens of our consumption-based experiences within them. The enquiry describes individual and collective identifications and emotional connections, and explores how these arise within and through our experiences within public and quasi-public spaces. It then theorises these ‘imaginings’ as representative of an experience of community. To do so, it draws on theories of imagination and its relation to community. Theories of imagined community remind us that both the values and identities of community are held together by projections that create relational links out of objects and shared practices (e.g., Benedict Anderson, 2006; Urry, 2000). Drawing on broader theories of the processes of the imagination, this thesis suggests that an interplay between reflexivity and fantasy – which are products of the critical and the fascinated consciousness – plays a role in this imagining of community (e.g., Brann, 1991; Ricoeur, 1994). This thesis therefore seeks to explore how these processes of imagining are implicated within the construction of an experience of belonging to neighbourhood-based community through consumption practices and the public and quasi-public spaces that frame them. The key question of this thesis is how do an individual’s consumption practices work to construct an imagined presence of neighbourhood-based community? Given the focus on public and quasi-public spaces and our experiences within them, the research also asked how do experiences in the public and quasi-public spaces that frame these practices contribute to the construction of this imagined presence? This investigation of imagining community through consumption practices is based on my own experiences of moving to, and attempting to construct community connections within, an inner city neighbourhood in Melbourne, Australia. To do so, I adopted autoethnographic methodology. This is because autoethnography provides the methodological tools through which one can explore and make visible the subjectivities inherent within the lived experiences of interest to the thesis (Ellis, 2004). I describe imagining community through consumption as an extension of a placebased self. This self is manifest through personal identification in consumption spaces that operate as anchoring realms for specific cultural groups, as well as through a broader imagining of spaces, people, and practices as connected through experiences within realms of exposure. However, this is a process that oscillates through cycles of identification; these anchor one within place personally, but also disrupt those attachments. This instability can force one to question the orientation and motives of these imaginings, and reframe them according to different spaces and reference groups in ways that can also work to construct a more anonymous and, conversely, more achievable collective identification. All the while, the ‘I’ at the heart of this identification is in an ongoing process of negotiation, and similarly, the imagined community is never complete. That is, imagining community is a negotiation, with people and spaces – but mostly with the different identifications of the self. This thesis has been undertaken by publication, and thus the process of imagining community is explored and described through four papers. Of these, the first two focus on specific types of consumption spaces – a bar and a shopping centre – and consider the ways that anchoring and exposure within these spaces support the process of imagining community. The third paper examines the ways that the public and quasi-public spaces that make up the broader neighbourhood context are themselves throwntogether as a realm of exposure, and considers the ways this shapes my imaginings of this neighbourhood as community. The final paper develops a theory of imagined community, as a process of comparison and contrast with imagined others, to provide a summative conceptualisation of the first three papers. The first paper, chapter five, explores this process of comparison and contrast in relation to authenticity, which in itself is a subjective assessment of identity. This chapter was written as a direct response to the recent work of Zukin (2010), and draws on theories of authenticity as applied to personal and collective identification practices by consumer researchers Arnould and Price (2000). In this chapter, I describe how my assessments of the authenticity of my anchoring experiences within one specific consumption space, a neighbourhood bar, are evaluated in comparison to my observations of and affective reactions to the social practices of another group of residents in a different consumption space, the local shopping centre. Chapter five also provides an overview of the key sites and experiences that are considered in more detail in the following two chapters. In chapter six, I again draw on my experiences within the bar introduced in chapter five, this time to explore the process of developing a regular identity within a specific consumption space. Addressing the popular theory of the cafe or bar as third place (Oldenburg, 1999), this paper considers the purpose of developing anchored relationships with people within specific consumption spaces, and explores the different ways this may be achieved in an urban context where the mobilities and lifestyle practices of residents complicate the idea of a consumption space as an anchoring or third place. In doing so, this chapter also considers the manner in which this type of regular identification may be seen to be the beginning of the process of imagining community. In chapter seven, I consider the ways the broader public spaces of the neighbourhood work cumulatively to expose different aspects of its identity by following my everyday movements through the neighbourhood’s shopping centre and main street. Drawing on the theories of Urry (2000), Massey (2005), and Amin (2007, 2008), this chapter describes how these spaces operate as exposure realms, enabling the expression of different senses of the neighbourhood’s spaces, times, cultures, and identities through their physical, social, and symbolic elements. Yet they also enable them to be united: through habitual pathways, group practices of appropriation of space, and memory traces that construct connections between objects and experiences. This chapter describes this as a process of exposure to these different elements. Our imagination begins to expand the scope of the frames onto which it projects an imagined presence; it searches for patterns within the physical, social, and symbolic environment and draws connections between people and practices across spaces. As the final paper, chapter eight, deduces, it is in making these connections that one constructs the objects and shared practices of imagined community. This chapter describes this as an imagining of neighbourhood as a place-based extension of the self, and then explores the ways in which I drew on physical, social, and symbolic elements in an attempt to construct a fit between the neighbourhood’s offerings and my desires for place-based identity definition. This was as a cumulative but fragmented process, in which positive and negative experiences of interaction and identification with people and things were searched for their potential to operate as the objects and shared practices of imagined community. This chapter describes these connections as constructed through interplay between reflexivity and fantasy, as the imagination seeks balance between desires for experiences of belonging, and the complexities of constructing them within the throwntogether context of the contemporary city. The conclusion of the thesis describes the process of imagining community as a reflexive fantasy, that is, as a product of both the critical and fascinated consciousness (Ricoeur, 1994). It suggests that the fascinated consciousness imbues experiences with hope and desire, which the reflexive imagining can turn to disappointment and shame as it critically reflects on the reality of those fascinated projections. At the same time, the reflexive imagination also searches the practices of others for affirmation of those projections, effectively seeking to prove the reality of the fantasy of the imagined community.

Australia's mining interests within Nigeria and Libya : policies, corruption and conflict

Crude petroleum remains the single most imported commodity into Australia and is sourced from a number of countries around the world (Department of Foreign Affairs and Trade (DFAT), 2011a). While interest in crude petroleum is widespread, in recent years Australia's focus has been drawn to the continent of Africa, where increased political stability, economic recovery and an improved investment climate has made one of the largest oil reserves in the world increasingly more attractive. Despite improvement across the continent, there remain a number of risks which have the potential to significantly damage Australia's economic interests in the petroleum sector,including government policies and legislation, corruption and conflict. The longest exporters of crude petroleum products to Australia – Nigeria and Libya – have been subject to these factors in recent years and, accordingly, are the focus of this paper. Once identified, the impact of political instability, conflict, government corruption and other risk factors to Australia's mining interests within these countries is examined, and efforts to manage such risks are discussed.

Numerical solutions for thin film flow down the outside and inside of a vertical cylinder

We consider a model for thin film flow down the outside and inside of a vertical cylinder. Our focus is to study the effect that the curvature of the cylinder has on the gravity-driven instability of the advancing contact line and to simulate the resulting fingering patterns that form due to this instability. The governing partial differential equation is fourth order with a nonlinear degenerate diffusion term that represents the stabilising effect of surface tension. We present numerical solutions obtained by implementing an efficient alternating direction implicit scheme. When compared to the problem of flow down a vertical plane, we find that increasing substrate curvature tends to increase the fingering instability for flow down the outside of the cylinder, whereas flow down the inside of the cylinder substrate curvature has the opposite effect. Further, we demonstrate the existence of nontrivial travelling wave solutions which describe fingering patterns that propagate down the inside of a cylinder at constant speed without changing form. These solutions are perfectly analogous to those found previously for thin film flow down an inclined plane.

Load frequency control in a microgrid : challenges and improvements

A microgrid can span over a large area, especially in rural townships. In such cases, the distributed generators (DGs) must be controlled in a decentralized fashion, based on the locally available measurements. The main concerns are control of system voltage magnitude and frequency, which can either lead to system instability or voltage collapse. In this chapter, the operational challenges of load frequency control in a microgrid are discussed and few methods are proposed to meet these challenges. In particular, issues of power sharing, power quality and system stability are addressed, when the system operates under decentralized control. The main focus of this chapter is to provide solutions to improve the system performance in different situations. The scenarios considered are (a) when the system stability margin is low, (b) when the line impedance has a high R to X ratio, (c) when the system contains unbalanced and/or distorted loads. Also a scheme is proposed in which a microgrid can be frequency isolated from a utility grid while being capable of bidirectional power transfer. In all these cases, the use of angle droop in converter interfaced DGs is adopted. It has been shown that this results in a more responsive control action compared to the traditional frequency based droop control.

Cytogenetics of basal cell carcinoma and squamous cell carcinomas

Cytogenetic analysis is a powerful tool that allows analysis of chromosomal aberrations associated with diseased states. In particular, a combination of cytogenetic techniques has allowed the identification of aberrations associated with cancer development, including cancers of the skin. This chapter provides a comprehensive overview of cytogenetic alterations in basal and squamous cell carcinomas of the skin. These two distinct lesions have altered karyotypes that are consistent with their malignant potential. Basal cell carcinomas, although relatively stable lesions, are highly associated with recurrent aberrations of chromosomes 6, 7, 9 and X, as detected by a number of cytogenetic techniques. Squamous cell carcinomas, on the other hand are associated with a much higher degree of instability, involving aberrations of chromosomes 3, 7, 8, 11, 13, 17 and 18, as detected using a number of cytogenetic techniques. Overall, the numbers and types of aberrations associated with basal and squamous cell carcinoma, define the characteristic behaviour associated with these lesions and identification of these aberrations may aid in the understanding of malignant potential, prognosis and treatment of these skin cancers.

Investigation of the intensity dependence of amplitude noise in electro-optic phase modulators

This thesis studied the source of instability in optical phase modulators used in high accuracy laser measurement systems. The nonlinear origin of the amplitude noise helped further reducing this instability in applications that rely on phase modulators to function. This outcome will have positive impacts on the development of new methods in the amplitude noise suppression.

On facilitating regional integration and economic development with collaborative technologies in the South Pacific

The current global economic instability and the vulnerability of small island nations are providing the impetus for greater integration between the countries of the South Pacific region. This exercise is critical for their survival in today’s turbulent economic environment. Past efforts of regional integration in the South Pacific have not been very successful. Reasons attributed to this outcome include issues related to damage of sovereignty, and lack of a shared integration infrastructure. Today, the IT resources with collaborative capacities provide the opportunity to develop a shared IT infrastructure to facilitate integration in the South Pacific. In an attempt to develop a model of regional integration with an IT-backed infrastructure, we identify and report on the antecedents of the current stage of regional integration, and the stakeholders’ perceived benefits of an IT resources backed regional integration in the South Pacific. Employing a case study based approach, the study finds that while most stakeholders were positive about the potential of IT-backed regional integration, significant challenges exist that hinder the realisation of this model. The study finds that facilitating IT-backed regional integration requires enabling IT infrastructure, equitable IT development in the region, greater awareness on the potential of the modern IT resources, market liberalisation of the information and telecommunications sector and greater political support for IT initiatives.

Mathematical models of bubble evolution in a Hele-Shaw Cell

This thesis concerns the mathematical model of moving fluid interfaces in a Hele-Shaw cell: an experimental device in which fluid flow is studied by sandwiching the fluid between two closely separated plates. Analytic and numerical methods are developed to gain new insights into interfacial stability and bubble evolution, and the influence of different boundary effects is examined. In particular, the properties of the velocity-dependent kinetic undercooling boundary condition are analysed, with regard to the selection of only discrete possible shapes of travelling fingers of fluid, the formation of corners on the interface, and the interaction of kinetic undercooling with the better known effect of surface tension. Explicit solutions to the problem of an expanding or contracting ring of fluid are also developed.

A living laboratory proposition for revitalising regional Australia

A strong Small and Medium Enterprises (SMEs) sector is said to underpin a competitive advantage of the Australian regions that are struggling to grow the economy, distribute the growth fairly, and in the process not degrade the environment. The concept of Regional Innovation Systems that draws on industrial cluster theory has gained currency as an umbrella framework for enabling the SMEs sector. However, there are significant gaps between research and innovation of such ‘one-size-fits-all’ approach. This paper responds to this gap and proposes a Living Laboratory – an open multidisciplinary and multi-stakeholder action research platform where innovations can be co-created, tested, and evaluated in the every-day environment of SME – as a way to strengthen the SMEs sector in regional Australia.

Conceptual and thematic analysis of policies and guidelines on engineering asset management of different states in Australia

The role of government in developing policies and guidelines for asset management is becoming increasingly important especially in view of ageing infrastructure and increasing financial risks for building infrastructure. This paper reviews policies and guidelines developed by Australian state authorities against industry developed principles. It utilizes the software program Leximancer to; a) produce conceptual visualisations of the key themes and concepts embedded within state-wide policies and guidelines, and b) systematically compare the differing asset management foci between states. The analyses reveal mixed results in terms of policy priorities and guidelines for managing assets at a strategic level across states. This paper outlines a rigorous analytical methodology to inform specific policy changes.

Flexural capacity of hollow flange beams

The hollow flange beam (HFB) is a unique cold-formed steel section developed in Australia for use as a flexural member. Research has identified that the HFB section's flexural capacity for intermediate span members is limited by lateral distortional buckling, which is characterized by simultaneous lateral deflection, twist, and web distortion. This buckling behaviour is mainly due to the unique geometry of the section, comprising two torsionally stiff triangular flanges connected by a slender web. This paper presents a finite element analytical model suitable for non-linear analysis of HFB flexural members. The model includes all significant effects that may influence the ultimate capacity of such members, including material inelasticity, local buckling, member instability, web distortion, residual stresses, and geometric imperfections. It was found to accurately predict both the elastic lateral distortional buckling moments and the ultimate capacities of HFB flexural members, and was therefore used in the development of design curves and suitable design procedures.

Daxx regulates mitotic progression and prostate cancer predisposition

Mitotic progression of mammalian cells is tightly regulated by the E3 ubiquitin ligase anaphase promoting complex (APC)/C. Deregulation of APC/C is frequently observed in cancer cells and is suggested to contribute to chromosome instability and cancer predisposition. In this study, we identified Daxx as a novel APC/C inhibitor frequently overexpressed in prostate cancer. Daxx interacts with the APC/C coactivators Cdc20 and Cdh1 in vivo, with the binding of Cdc20 dependent on the consensus destruction boxes near the N-terminal of the Daxx protein. Ectopic expression of Daxx, but not the D-box deleted mutant (DaxxΔD-box), inhibited the degradation of APC/Cdc20 and APC/Cdh1 substrates, leading to a transient delay in mitotic progression. Daxx is frequently upregulated in prostate cancer tissues; the expression level positively correlated with the Gleason score and disease metastasis (P = 0.027 and 0.032, respectively). Furthermore, ectopic expression of Daxx in a non-malignant prostate epithelial cell line induced polyploidy under mitotic stress. Our data suggest that Daxx may function as a novel APC/C inhibitor, which promotes chromosome instability during prostate cancer development.