Development of an on-demand beam pulsing system for Pixe-analysis of thick targets

This work concerns the developnent of a proton irduced X-ray emission (PIXE) analysis system and a multi-sample scattering chamber facility. The characteristics of the beam pulsing system and its counting rate capabilities were evaluated by observing the ion-induced X-ray emission from pure thick copper targets, with and without beam pulsing operation. The characteristic X-rays were detected with a high resolution Si(Li) detector coupled to a rrulti-channel analyser. The removal of the pile-up continuum by the use of the on-demand beam pulsing is clearly demonstrated in this work. This new on-demand pu1sirg system with its counting rate capability of 25, 18 and 10 kPPS corresponding to 2, 4 am 8 usec main amplifier time constant respectively enables thick targets to be analysed more readily. Reproducibility tests of the on-demard beam pulsing system operation were checked by repeated measurements of the system throughput curves, with and without beam pulsing. The reproducibility of the analysis performed using this system was also checked by repeated measurements of the intensity ratios from a number of standard binary alloys during the experimental work. A computer programme has been developed to evaluate the calculations of the X-ray yields from thick targets bornbarded by protons, taking into account the secondary X-ray yield production due to characteristic X-ray fluorescence from an element energetically higher than the absorption edge energy of the other element present in the target. This effect was studied on metallic binary alloys such as Fe/Ni and Cr/Fe. The quantitative analysis of Fe/Ni and Cr/Fe alloy samples to determine their elemental composition taking into account the enhancement has been demonstrated in this work. Furthermore, the usefulness of the Rutherford backscattering (R.B.S.) technique to obtain the depth profiles of the elements in the upper micron of the sample is discussed.

An econometric analysis of international tourism demand in Hong Kong : a cointegration and error correction approach

The purpose of this study is to develop econometric models to better understand the economic factors affecting inbound tourist flows from each of six origin countries that contribute to Hong Kong’s international tourism demand. To this end, we test alternative cointegration and error correction approaches to examine the economic determinants of tourist flows to Hong Kong, and to produce accurate econometric forecasts of inbound tourism demand. Our empirical findings show that permanent income is the most significant determinant of tourism demand in all models. The variables of own price, weighted substitute prices, trade volume, the share price index (as an indicator of changes in wealth in origin countries), and a dummy variable representing the Beijing incident (1989) are also found to be important determinants for some origin countries. The average long-run income and own price elasticity was measured at 2.66 and – 1.02, respectively. It was hypothesised that permanent income is a better explanatory variable of long-haul tourism demand than current income. A novel approach (grid search process) has been used to empirically derive the weights to be attached to the lagged income variable for estimating permanent income. The results indicate that permanent income, estimated with empirically determined relatively small weighting factors, was capable of producing better results than the current income variable in explaining long-haul tourism demand. This finding suggests that the use of current income in previous empirical tourism demand studies may have produced inaccurate results. The share price index, as a measure of wealth, was also found to be significant in two models. Studies of tourism demand rarely include wealth as an explanatory forecasting long-haul tourism demand. However, finding a satisfactory proxy for wealth common to different countries is problematic. This study indicates with the ECM (Error Correction Models) based on the Engle-Granger (1987) approach produce more accurate forecasts than ECM based on Pesaran and Shin (1998) and Johansen (1988, 1991, 1995) approaches for all of the long-haul markets and Japan. Overall, ECM produce better forecasts than the OLS, ARIMA and NAÏVE models, indicating the superiority of the application of a cointegration approach for tourism demand forecasting. The results show that permanent income is the most important explanatory variable for tourism demand from all countries but there are substantial variations between countries with the long-run elasticity ranging between 1.1 for the U.S. and 5.3 for U.K. Price is the next most important variable with the long-run elasticities ranging between -0.8 for Japan and -1.3 for Germany and short-run elasticities ranging between – 0.14 for Germany and -0.7 for Taiwan. The fastest growing market is Mainland China. The findings have implications for policies and strategies on investment, marketing promotion and pricing.

Investigating the supply and demand relationship in a profession: the English and Welsh schools of librarianship and information Studies and the Higher Education Library and Information Services employment sector in England and Wales.

Concern has been expressed in the professional literature - borne out by professional experience and observation - that the supply and demand relationship existing between the 13 English and Welsh Library and Information Studies (LIS) Schools (as providers of `First Professional' staff) and the Higher Education Library and Information Services (HE LIS) sector of England and Wales (as one group of employers of such staff) is unsatisfactory and needs attention. An appropriate methodology to investigate this problem was devised. A basic content analysis of Schools' curricular and recruitment material intended for public consumption was undertaken to establish an overview of the LIS initial professional education system in England and Wales, and to identify and analyse any covert messages imparted to readers. This was followed by a mix of Main Questionnaires and Semi-Structured Interviews with appropriate populations. The investigation revealed some serious areas of dissatisfaction by the HE LIS Chiefs with the role and function of the Schools. Considerable divergence of views emerged on the state of the working relationships between the two sectors and on the Schools' successes in meeting the needs of the HE LIS sector and on CPD provision. There were, however, areas of substantial and consistent agreement between the two sectors. The main implications of the findings were that those areas encompassing divergence of views were worrying and needed addressing by both sides. Possible ways forward included recommendations on improving the image of the profession purveyed by the Schools; the forming of closer and more effective inter-sectoral relationships; recognising fully the importance of `practicum' and increasing and sustaining the network of `practicum' providers.

Enhancing creativity in a general work environment : the role of problem-solving demand

Prior research suggests management can employ cognitively demanding job attributes to promote employee creativity. However, it is not clear what specific type of cognitive demand is particularly important for creativity, what processes underpin the relationship between demanding job conditions and creativity and what factors lead to employee perceptions of demanding job attributes. This research sets out to address the aforementioned issues by examining: (i) problem-solving demand (PDS), a specific type of cognitive demand, and the processes that link PSD to creativity, and (ii) antecedents to PSD. Based on social cognitive theory, PSD was hypothesized to be positively related to creativity through the motivational mechanism of creative self-efficacy. However, the relationship between PSD and creative self-efficacy was hypothesized to be contingent on levels of intrinsic motivation. Social information processing perspective and the job crafting model were used to identify antecedents of PSD. Consequently, two social-contextual factors (supervisor developmental feedback and job autonomy) and one individual factor (proactive personality) were hypothesized to be precursors to PSD perceptions. The theorized model was tested with data obtained from a sample of 270 employees and their supervisors from 3 organisations in the People’s Republic of China. Regression results revealed that PSD was positively related to creativity but this relationship was partially mediated by creative self-efficacy. Additionally, intrinsic motivation moderated the relationship between PSD and creative self-efficacy such that the relationship was stronger for individuals high rather than low in intrinsic motivation. The findings represent a productive first step in identifying a specific cognitive demand that is conducive to employee creativity. In addition, the findings contribute to the literature by identifying a psychological mechanism that may link cognitively demanding job attributes and creativity.

Aspects of the design and control of manufacturing systems subject to demand uncertainty

The recent explosive growth in advanced manufacturing technology (AMT) and continued development of sophisticated information technologies (IT) is expected to have a profound effect on the way we design and operate manufacturing businesses. Furthermore, the escalating capital requirements associated with these developments have significantly increased the level of risk associated with initial design, ongoing development and operation. This dissertation has examined the integration of two key sub-elements of the Computer Integrated Manufacturing (CIM) system, namely the manufacturing facility and the production control system. This research has concentrated on the interactions between production control (MRP) and an AMT based production facility. The disappointing performance of such systems has been discussed in the context of a number of potential technological and performance incompatibilities between these two elements. It was argued that the design and selection of operating policies for both is the key to successful integration. Furthermore, policy decisions are shown to play an important role in matching the performance of the total system to the demands of the marketplace. It is demonstrated that a holistic approach to policy design must be adopted if successful integration is to be achieved. It is shown that the complexity of the issues resulting from such an approach required the formulation of a structured design methodology. Such a methodology was subsequently developed and discussed. This combined a first principles approach to the behaviour of system elements with the specification of a detailed holistic model for use in the policy design environment. The methodology aimed to make full use of the `low inertia' characteristics of AMT, whilst adopting a JIT configuration of MRP and re-coupling the total system to the market demands. This dissertation discussed the application of the methodology to an industrial case study and the subsequent design of operational policies. Consequently a novel approach to production control resulted. A central feature of which was a move toward reduced manual intervention in the MRP processing and scheduling logic with increased human involvement and motivation in the management of work-flow on the shopfloor. Experimental results indicated that significant performance advantages would result from the adoption of the recommended policy set.

Ethnic groups as market segments: implications of the demand structure

Ethnic market potential in Britain has not yet been thoroughly researched. Important recent trends have focused mainly on the affective and emotional aspects of ethnicity, and included deliberations on the emergence of a revitalised neo-ethnic consciousness; its identification; politicisation, and the impact on it; of a rising third-world consciousness. This investigation attempts to take cognizance of the consuner demand of the ethnic Asian and West Indian groups, as specific market segments. It discusses the rationale for ethnic segmentation on the underlying premise, that the starting point for all product marketing is a response to perceived market opportunities. On the basis of this approach, the UK laundry detergent and automobile markets were investigated; as being representative of product categories constitutirg extremes along the purchase-search-time continuun in consuner decision-making. Ethnic groups were further analysed for their retail patronage patterns; media usage, and the differential effectiveness of alternative advertisirg strategies. The basic technique of marketing research namely the sample survey, was used with the aim of applying scientific techniques in obtaining information on ethnic groups. The integrated marketirg framework utilised allowed, moreover, for the collection of market research data on the specific issues of ethnic product penetration dealing with retailing, advertising and product promotion. The evidence highlights the fact that the cultural orientations of ethnic groups are instrunental in providing for differential demand structures. It points to the answer that ethnicity is an anchor not only for a deeper sense of identity; but also serves as a focus for the economic interests of ethnic groups. On this basis it is argued here, that since cultural levelling would eventually produce stagnation; current marketing strategies should utilise ethnic diversity as an econanic artifact; which; per se is necessary for profitability and growth; especially in innovative product design and development.

A comparison of sales response predictions from demand models applied to store-level versus panel data

In order to generate sales promotion response predictions, marketing analysts estimate demand models using either disaggregated (consumer-level) or aggregated (store-level) scanner data. Comparison of predictions from these demand models is complicated by the fact that models may accommodate different forms of consumer heterogeneity depending on the level of data aggregation. This study shows via simulation that demand models with various heterogeneity specifications do not produce more accurate sales response predictions than a homogeneous demand model applied to store-level data, with one major exception: a random coefficients model designed to capture within-store heterogeneity using store-level data produced significantly more accurate sales response predictions (as well as better fit) compared to other model specifications. An empirical application to the paper towel product category adds additional insights. This article has supplementary material online.

An analysis of food demand in Peru:implications for food-feed competition

In their policy proposals on how best to stimulate economic growth, economists have been increasingly emphasizing free markets. It is, however, possible that free-market-led economic growth can lead to increased income inequity which can further increase poverty. One of the more interesting but thus far insufficiently explored mechanisms for the latter is food–feed competition. Using Peruvian Living Standard Survey (PLSS) data for 1985–86 and 1990, the paper examines the demand patterns of households and concludes that the empirical evidence is in agreement with the hypotheses underlying the theory of food–feed competition.

Cross-category demand effects of price promotions

Do promotions in a certain category lead to higher revenues in other categories? If so, to what degree? The answers to these questions are highly relevant for retailers that supply products in different categories. Empirical findings in studies that consider a limited number of categories indicate small promotional cross-category effects. This study develops a framework to determine the impact of price promotions on category revenues that include interdependencies among a substantial number of categories at the category demand level. The own- and cross-category demand effects are moderated by variables such as promotion intensity, category characteristics (own-category effects), and spatial distances between shelf locations (cross-category effects). The empirical results based on daily store-level scanner data show that approximately half of all price promotions expand own-category revenues, especially for categories with deeper supported discounts. There is a high probability (61%) that a price promotion affects sales of at least one other category. The number of categories affected is not greater than two. Moderate evidence supports the existence of cross-promotional effects between categories more closely located in a store.

New measures of job control, cognitive demand and production responsibility

Recent research has highlighted several job characteristics salient to employee well-being and behavior for which there are no adequate generally applicable measures. These include timing and method control, monitoring and problem-solving demand, and production responsibility. In this article, an attempt to develop measures of these constructs provided encouraging results. Confirmatory factor analyses applied to data from 2 samples of shop-floor employees showed a consistent fit to a common 5-factor measurement model. Scales corresponding to each of the dimensions showed satisfactory internal and test–retest reliabilities. As expected, the scales also discriminated between employees in different jobs and employees working with contrasting technologies.

The relationship between the level of domestic demand in Britain an dthe exports of the British motor car industry

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT