Descripción de la morfología externa e interna del langostino con algunas aplicaciones de indole taxonómica y biológica

In the present paper the external and internal morphology of the shrimp Pleoticus muelleri (Bate), is described in detail. Special attention is given to those features which are of diagnostic value or which are significant for a fuller understanding of the biology of this species. The major portion of the paper deals with the description of the cephalopereion, pleon and telson and its appendages, as well as the nervous, respiratory, circulatory, digestive, excretory and reproductive systems. Special attention is given to the digestive system, the stomodaeal apparatus and sexual dimorphism. The relations between form and function of several organs and systems are pointed out. A study is made of the development of the gonads, the sexual cycle in males and females; the variations found in relative weight and size are described. The phylogenetical jposition of the Penaeidae, the genera of the subfamily Solenoceridae and of P. muelleri are discussed. (PDF contains 72 pages)

Boundary-layer transition on a slender cone in hypervelocity flow with real gas effects

The laminar to turbulent transition process in boundary layer flows in thermochemical nonequilibrium at high enthalpy is measured and characterized. Experiments are performed in the T5 Hypervelocity Reflected Shock Tunnel at Caltech, using a 1 m length 5-degree half angle axisymmetric cone instrumented with 80 fast-response annular thermocouples, complemented by boundary layer stability computations using the STABL software suite. A new mixing tank is added to the shock tube fill apparatus for premixed freestream gas experiments, and a new cleaning procedure results in more consistent transition measurements. Transition location is nondimensionalized using a scaling with the boundary layer thickness, which is correlated with the acoustic properties of the boundary layer, and compared with parabolized stability equation (PSE) analysis. In these nondimensionalized terms, transition delay with increasing CO₂ concentration is observed: tests in 100% and 50% CO₂, by mass, transition up to 25% and 15% later, respectively, than air experiments. These results are consistent with previous work indicating that CO₂ molecules at elevated temperatures absorb acoustic instabilities in the MHz range, which is the expected frequency of the Mack second-mode instability at these conditions, and also consistent with predictions from PSE analysis. A strong unit Reynolds number effect is observed, which is believed to arise from tunnel noise. N_Tr for air from 5.4 to 13.2 is computed, substantially higher than previously reported for noisy facilities. Time- and spatially-resolved heat transfer traces are used to track the propagation of turbulent spots, and convection rates at 90%, 76%, and 63% of the boundary layer edge velocity, respectively, are observed for the leading edge, centroid, and trailing edge of the spots. A model constructed with these spot propagation parameters is used to infer spot generation rates from measured transition onset to completion distance. Finally, a novel method to control transition location with boundary layer gas injection is investigated. An appropriate porous-metal injector section for the cone is designed and fabricated, and the efficacy of injected CO₂ for delaying transition is gauged at various mass flow rates, and compared with both no injection and chemically inert argon injection cases. While CO₂ injection seems to delay transition, and argon injection seems to promote it, the experimental results are inconclusive and matching computations do not predict a reduction in N factor from any CO₂ injection condition computed.

Cidades secas, vidas secas: A trajetória das águas e sua regulamentação no Rio de Janeiro sob uma perspectiva urbano-ambiental

Esta tese analisará a distribuição das águas na cidade do Rio de Janeiro considerando os elementos sociais, jurídicos, políticos, e seus reflexos no direito urbano e ambiental. Nesse aspecto referenciará as medidas de regulação e de organização da estrutura urbana, desde a formação da cidade até os dias atuais, assim como as consequências da exclusão e da ausência das políticas urbanas equitativas. No início, as ocupações irregulares, se distantes do centro e dos bairros elitizados, não despertavam maiores demandas do poder público, porém com o aumento das periferias e as ocupações próximas aos bairros formais, inúmeras medidas adotadas optaram pela remoção, contenção e a destruição dos espaços sem apresentar uma solução, agravando os problemas urbanos. Tais problemas, reconhecidamente sociais, passam a ser denominados urbanos e ambientais, gerando uma complexa criminalização dos moradores das periferias. As intervenções nos espaços são legalizadas pelo instrumento jurídico, as residências suburbanas são classificadas como ilegais e, por consequência, os recursos que deveriam atender a todos na cidade são direcionados apenas para cidade legalizada, criando a celeuma da desigualdade. Assim, amontoados em barracos precários, sem abastecimento de água, energia, esgoto e coleta de lixo, as periferias multiplicam as diversas formas de violência, uma vez que o direito não socorre esses moradores que, abandonados pela lei, vivem a escassez das águas e a especulação dos serviços ilegais de abastecimento. A crise do abastecimento não é causada pelas populações mais empobrecidas, mas pelo mercado que se apropria da maior parte desses recursos, dentro do sistema de uma lógica capitalista, e exclui aqueles que não podem pagar pelo abastecimento regular. Nesse sentido, este trabalho entende que o direito, ainda que tenha se tornado regulatório pode assumir um caráter revolucionário e transformador em que o direito das águas seja um direito da comunidade, por isso, um bem público não estatal, por fim objetiva esse trabalho estudar as leis das águas dentro do paradigma da solidariedade hídrica.

Determination of optimum stocking density of Macrobrachium rosenbergii larvae using multiple feed in a commercial hatchery at Cox’s Bazar, Bangladesh

Experimental stocking density of Macrobrachium rosenbergii in larval rearing was conducted in A.G. Aqua Hatchery, Chakaria, Bangladesh to study the effect of different stocking densities on growth, survival rate and diseases stress under hatchery condition. The research work was conducted using six cemented rectangular tanks having 3m3 capacity (1.5mX2mX1m) each. Stocking density were maintained in three experimental setup as 200, 150 and 100ind/L of the T1, T2 and T3 respectively with one replicate each. The larvae were fed with Artemia nauplii, Custard, Maxima and brine shrimp flakes. Water quality was maintained by exchanging 20-30% (12ppt saline water) daily. During the study period, temperature, pH, DO, salinity, nitrite-nitrogen, ammonia and alkalinity were maintained from 28.5-31.5ºC, 7.5-7.8, 5.8-5.9mg/L, 12-13ppt, 0.14-0.2 mg/L, 0.22-0.3mg/L, and 140-160mg/L respectively. The growth rates of larvae at 11th stage were recorded in terms of body length 0.115, 0.136, and 0.169 mm/day whereas body weight were observed 0.000115, 0.000180, and 0.000240g/day. The survival rate of larvae were found 21.8%, 30.4% and 51.3% in treatments T1, T2 and T3 respectively. PL was obtained as 43, 45, and 51PL/L and days required of 41, 38 and 34 days in stocking density of 200, 150, and 100ind/L respectively. It was found that the minimum of 34 days was required to attain the PL (12th stage) using the stocking density of 100 individuals/L. Cannibalism, Zoothamnium, Exuvia Entrapment Disease (EED), and Bacterial Necrosis (BN) were found to be the threat to the commercial hatchery operation that might responsible for potential larval damages which can be reduced by lowering the stocking densities in larval rearing tank that also increased the survival and growth rate.

Da deficiência à diferença: um percurso necessário à subjetivação da criança cega

As reflexões acerca desta pesquisa iniciaram-se tendo como ponto de partida o interesse pelas questões relacionadas às experiências mais primitivas que estão na base da constituição da subjetividade. Pensa-se, tal como alguns autores, que as vivências iniciais de um bebê são bastante importantes para a formação de seu aparato psíquico, sobretudo, as que dizem respeito ao conjunto de sensações nas quais o mesmo está imerso. Mas, então, o que se passa quando o bebê nasce com alguma deficiência em seu aparato sensório-motor, como no caso de bebês cegos de nascença? Sabe-se que as pessoas cegas precisam utilizar outros meios para estabelecer relações com o mundo dos objetos, pessoas e coisas que as cercam, implicando um processo de profunda reorganização perceptiva no qual os estímulos proporcionados pelo ambiente desempenharão um papel fundamental. No entanto, vários estudos apontam que muitas destas crianças cegas desde o nascimento não conseguem se desenvolver de modo harmônico manifestando distúrbios freqüentemente semelhantes ao autismo em crianças videntes, entre outros. Parece que, nestes casos, a incapacidade visual do bebê afetou profundamente as capacidades de vínculo com as figuras de apego e este fato originou seqüelas importantes na evolução da criança. No outro extremo, bebês que conseguiram um nível de desenvolvimento adequado, mostraram vínculos saudáveis com a família, em especial com a mãe. Assim, a finalidade da presente pesquisa prende-se, por um lado, à compreensão do caminho percorrido por crianças que não contam com o auxílio do sentido da visão e, por outro, ao entendimento do papel dos primeiros vínculos tanto para os casos de saúde quanto para os casos em que a patologia e o sofrimento psíquico surgem.

Condições de trabalho de ambiente cirúrgico e a saúde dos trabalhadores de enfermagem

O Centro Cirúrgico é um serviço especializado com estrutura física e organizacional complexa, normas e rotinas rigorosas, intensa atividade técnica, aparato tecnológico que requer profissionais treinados. A pesquisa teve como objeto de estudo os fatores de riscos ocupacionais e os problemas de saúde decorrentes do trabalho, identificados pelos profissionais de enfermagem de um Centro Cirúrgico de um Hospital Universitário da cidade do Rio de Janeiro. Os objetivos foram: analisar os fatores de riscos ocupacionais que possibilitam o aparecimento de problemas de saúde nos profissionais de enfermagem do Centro Cirúrgico segundo esses trabalhadores; descrever as características sociodemográficas dos profissionais lotados no Centro Cirúrgico; levantar os fatores de risco do ambiente cirúrgico identificados pelos trabalhadores de enfermagem do Centro Cirúrgico de um Hospital Universitário; e, discutir a relação entre os riscos do ambiente de trabalho e os problemas de saúde autoreferidos por trabalhadores de enfermagem do Centro Cirúrgico. A metodologia usada foi uma pesquisa não-experimental, de natureza descritiva, com abordagem quantitativa, desenvolvida em um centro cirúrgico de um hospital universitário federal da cidade do Rio de Janeiro. A população escolhida foi composta de trabalhadores da equipe de enfermagem, lotados no mínimo há seis meses neste serviço e que aceitassem participar da pesquisa. O questionário de coleta de dados utilizado foi adaptado por Mauro dos Guias e Avaliação de riscos em indústrias de Boix e Vogel. O estudo foi submetido e aprovado pelo Comitê de Ética em Pesquisa (CEP) do Hospital Universitário em estudo, através Parecer Consubstanciado no. 287/10, protocolo no. 217/09. Os dados foram analisados através do Programa Statistical Package for the Social Sciences (SPSS), versão 13.0. Os riscos biológicos foram os mais apontados pelos trabalhadores de enfermagem, seguidos dos riscos químicos, ergonômicos e de acidentes ou mecânicos. As doenças provocadas pelo trabalho mais referidas foram o estresse, a lombalgia, as varizes, a fadiga muscular e os problemas de articulação. As doenças agravadas pelo trabalho mais citadas foram as varizes, a lombalgia, os problemas de articulação, o estresse, as lesões de coluna vertebral, os problemas digestivos e os transtornos do sono. Conclui-se que o Serviço estudado possui riscos inerentes às atividades desenvolvidas que caracterizam os problemas relacionados pelos trabalhadores, e que são passíveis de controle através da intensificação de um Programa de Prevenção de Riscos Ambientais voltado para o Centro Cirúrgico. A partir da NR 17 e a 32, pode-se consultar as diretrizes para prevenção dos riscos encontrados. Uma estratégia de reposição digna de pessoal de enfermagem é imprescindível, assim como estudo e implantação de um Programa de Prevenção de Riscos laborais aos trabalhadores do Centro Cirúrgico, e utilização do questionário aos demais membros da equipe multiprofissional.

Ausência de correlação entre a penetração do cimento AH Plus nos túbulos dentinários e a qualidade do selamento

O presente estudo objetivou testar experimentalmente a existência da possível correlação entre a penetração de cimento nos túbulos dentinários e a qualidade do selamento. Foram utilizados 60 incisivos centrais superiores humanos que formaram um único grupo experimental. Após a eliminação das porções coronárias, as raízes foram padronizadas em 13 mm de comprimento. A instrumentação dos canais foi realizada no sentido coroa-ápice, e o comprimento de trabalho estabelecido a 1 mm aquém do forame apical. Como solução irrigadora foi empregado o NaOCl a 5,25% e ao final, EDTA a 17%. Em seguida, todos os canais foram obturados com guta-percha e cimento AH Plus marcado com um corante fluorescente. Para determinar a qualidade do selamento das obturações endodônticas, as amostras foram submetidas ao modelo de infiltração de glicose sob pressão. As raízes foram montadas em um dispositivo de dupla-câmara selada para permitir a infiltração da glicose. Como controle negativo foram utilizados 4 dentes hígidos, e como controle positivo, 2 dentes instrumentados porém, não obturados. Foram utilizados 0,75 mL de solução de glicose a 1 mol/L na câmara superior e 0,75 mL de água deionizada na câmara inferior. Os dispositivos foram conectados a um sistema de distribuição de pressão desenvolvido com o objetivo de permitir a infiltração de 32 amostras em uma mesma etapa. A solução de glicose foi forçada apicalmente sob uma pressão de 15 psi durante 1 hora. Uma alíquota de 50 L foi coletada da câmara inferior para quantificar a glicose infiltrada. A concentração de glicose foi determinada através de um método enzimático com o auxílio do Kit Glucose HK e de um espectrofotômetro em um comprimento de onda de 340 nm. Na sequência, as amostras foram desacopladas dos corpos de prova, embutidas em resina epóxi e cortadas em 3 secções transversais. Uma sequência de preparação metalográfica padrão foi realizada para permitir a observação da penetração de cimento nos túbulos dentinários por meio de microscopia confocal e óptica. Os dados obtidos nos 2 experimentos foram cruzados pelo teste de correlação de Spearman, o qual revelou a inexistência de qualquer possibilidade de correlação (r = 0,12). Com base nesses resultados, o presente trabalho concluiu que, dentro das condições experimentais usadas, a quantidade de cimento presente dentro dos túbulos dentinários não teve relação com a qualidade do selamento produzido.

Fiber-optic integration and efficient detection schemes for optomechanical resonators

With the advent of the laser in the year 1960, the field of optics experienced a renaissance from what was considered to be a dull, solved subject to an active area of development, with applications and discoveries which are yet to be exhausted 55 years later. Light is now nearly ubiquitous not only in cutting-edge research in physics, chemistry, and biology, but also in modern technology and infrastructure. One quality of light, that of the imparted radiation pressure force upon reflection from an object, has attracted intense interest from researchers seeking to precisely monitor and control the motional degrees of freedom of an object using light. These optomechanical interactions have inspired myriad proposals, ranging from quantum memories and transducers in quantum information networks to precision metrology of classical forces. Alongside advances in micro- and nano-fabrication, the burgeoning field of optomechanics has yielded a class of highly engineered systems designed to produce strong interactions between light and motion.

Optomechanical crystals are one such system in which the patterning of periodic holes in thin dielectric films traps both light and sound waves to a micro-scale volume. These devices feature strong radiation pressure coupling between high-quality optical cavity modes and internal nanomechanical resonances. Whether for applications in the quantum or classical domain, the utility of optomechanical crystals hinges on the degree to which light radiating from the device, having interacted with mechanical motion, can be collected and detected in an experimental apparatus consisting of conventional optical components such as lenses and optical fibers. While several efficient methods of optical coupling exist to meet this task, most are unsuitable for the cryogenic or vacuum integration required for many applications. The first portion of this dissertation will detail the development of robust and efficient methods of optically coupling optomechanical resonators to optical fibers, with an emphasis on fabrication processes and optical characterization.

I will then proceed to describe a few experiments enabled by the fiber couplers. The first studies the performance of an optomechanical resonator as a precise sensor for continuous position measurement. The sensitivity of the measurement, limited by the detection efficiency of intracavity photons, is compared to the standard quantum limit imposed by the quantum properties of the laser probe light. The added noise of the measurement is seen to fall within a factor of 3 of the standard quantum limit, representing an order of magnitude improvement over previous experiments utilizing optomechanical crystals, and matching the performance of similar measurements in the microwave domain.

The next experiment uses single photon counting to detect individual phonon emission and absorption events within the nanomechanical oscillator. The scattering of laser light from mechanical motion produces correlated photon-phonon pairs, and detection of the emitted photon corresponds to an effective phonon counting scheme. In the process of scattering, the coherence properties of the mechanical oscillation are mapped onto the reflected light. Intensity interferometry of the reflected light then allows measurement of the temporal coherence of the acoustic field. These correlations are measured for a range of experimental conditions, including the optomechanical amplification of the mechanics to a self-oscillation regime, and comparisons are drawn to a laser system for phonons. Finally, prospects for using phonon counting and intensity interferometry to produce non-classical mechanical states are detailed following recent proposals in literature.

Multilayer Active Shell Mirrors

This thesis presents a novel active mirror technology based on carbon fiber composites and replication manufacturing processes. Multiple additional layers are implemented into the structure in order to provide the reflective layer, actuation capabilities and electrode routing. The mirror is thin, lightweight, and has large actuation capabilities. These features, along with the associated manufacturing processes, represent a significant change in design compared to traditional optics. Structural redundancy in the form of added material or support structures is replaced by thin, unsupported lightweight substrates with large actuation capabilities.

Several studies motivated by the desire to improve as-manufactured figure quality are performed. Firstly, imperfections in thin CFRP laminates and their effect on post-cure shape errors are studied. Numerical models are developed and compared to experimental measurements on flat laminates. Techniques to mitigate figure errors for thicker laminates are also identified. A method of properly integrating the reflective facesheet onto the front surface of the CFRP substrate is also presented. Finally, the effect of bonding multiple initially flat active plates to the backside of a curved CFRP substrate is studied. Figure deformations along with local surface defects are predicted and characterized experimentally. By understanding the mechanics behind these processes, significant improvements to the overall figure quality have been made.

Studies related to the actuation response of the mirror are also performed. The active properties of two materials are characterized and compared. Optimal active layer thicknesses for thin surface-parallel schemes are determined. Finite element simulations are used to make predictions on shape correction capabilities, demonstrating high correctabiliity and stroke over low-order modes. The effect of actuator saturation is studied and shown to significantly degrade shape correction performance.

The initial figure as well as actuation capabilities of a fully-integrated active mirror prototype are characterized experimentally using a Projected Hartmann test. A description of the test apparatus is presented along with two verification measurements. The apparatus is shown to accurately capture both high-amplitude low spatial-frequency figure errors as well as those at lower amplitudes but higher spatial frequencies. A closed-loop figure correction is performed, reducing figure errors by 94%.

Avaliação da degradação de elásticos ortodônticos intraorais de látex

Avaliou-se a taxa de degradação de elásticos ortodônticos de látex de diferentes fabricantes e diâmetros em diversos intervalos de tempo. Grupos de 15 elásticos de força média dos fabricantes AmericanOrthodontics (Sheboygan, Wis, EUA), Tp (La Porte, IN, EUA), Morelli (Sorocaba, SP, Brasil) e Uniden (Sorocaba, SP, Brasil); de diâmetros 3/16, 1/4 e 5/16 foram analisados nos intervalos de 0,1,3,6,12 e 24 horas, totalizando-se 1080 espécimes. Os elásticos foram estirados individualmente à distância de 30mm, respeitando-se o intervalo de um minuto entre cada estiramento. Os materiais foram acondicionados imersos em água deionizada à 37C. Realizou-se leitura das forças na máquina de ensaios Emic DL 500 (Emic Co, Sao Paulo, Brasil) à velocidade de 30 mm/min, com uma célula de 2Kg (Emic Co, Sao Paulo, Brasil). A leitura de cada elástico consumiu aproximadamente um minuto. Teste Kruskal-wallis com correções por Dunns aferiu significância estatística dos resultados. Foram observadas diferenças entre os grupos analisados, exceto às marcas Morelli e Tp. Foram significativas as inferências das variáveis tempo e marca comercial. Em 0 hora, a relação entre as forças geradas foi Morelli>AO>Uniden>Tp para elásticos 3/16 (p=0,0016) e 1/4 (p=0,0016) e, de Morelli>AO>Tp>Uniden para elásticos 5/16 (p=0,0087). Após 24 horas, as porcentagens de degradação dos elásticos foram AO>Morelli>Uniden>Tp no diâmetro 3/16; AO>Tp>Morelli>Uniden no diâmetro 1/4 e Tp>AO>Uniden>Morelli para elásticos de diâmetro 5/16. O comportamento no intervalo de 0-24 horas demonstrou uma queda acentuada no período de 0-3 horas, um ligeiro aumento em 3-6 horas, seguido de uma queda progressiva no intervalo de 6-24 horas.

Behaviour and mechanism of feeding of Lathonura rectirostris (Cladocera, Macrothricidae). [Translation from: Zoologicheskie Zhurnal 50, 1002-1010, 1971.]

The behaviour in the feeding process and the functional morphology of Lathonura rectirostris O.F. Muller - one of the widely distributed species of macrothricids - is studied. The current work is an attempt at morpho-functional analysis of the apparatus of the trunk appendages of Lathonura rectirostris O.F. Muller. This highly specialized species, the method of feeding of which basically comes to the mechanical scraping-off and collection of epiphytic single-celled algae and particles deposited on the surface of aquatic plants.

Sensing and Actuation from Biology to Electronics

We introduce an in vitro diagnostic magnetic biosensing platform for immunoassay and nucleic acid detection. The platform has key characteristics for a point-of-use (POU) diagnostic: portability, low-power consumption, low cost, and multiplexing capability. As a demonstration of capabilities, we use this platform for the room temperature, amplification-free detection of a 31 bp DNA oligomer and interferon-gamma (a protein relevant for tuberculosis diagnosis). Reliable assay measurements down to 100 pM for the DNA and 1 pM for the protein are demonstrated. We introduce a novel "magnetic freezing" technique for baseline measurement elimination and to enable spatial multiplexing. We have created a general protocol for adapting integrated circuit (IC) sensors to any of hundreds of commercially available immunoassay kits and custom designed DNA sequences.

We also introduce a method for immunotherapy treatment of malignant gliomas. We utilize leukocytes internalized with immunostimulatory nanoparticle-oligonucleotide conjugates to localize and retain immune cells near the tumor site. As a proof-of-principle, we develop a novel cell imaging and incubation chamber for in vitro magnetic motility experiments. We use the apparatus to demonstrate the controlled movement of magnetically loaded THP-1 leukocytes.

Finally, we introduce an IC transmitter and power ampli er (PA) that utilizes electronic digital infrastructure, sensors, and actuators to self-heal and adapt to process, dynamic, and environmental variation. Traditional IC design has achieved incredible degrees of reliability by ensuring that billions of transistors on a single IC die are all simultaneously functional. Reliability becomes increasingly difficult as the size of a transistor shrinks. Self-healing can mitigate these variations.

Exploring the Kinetics of Domain Switching in Ferroelectrics for Structural Applications

The complex domain structure in ferroelectrics gives rise to electromechanical coupling, and its evolution (via domain switching) results in a time-dependent (i.e. viscoelastic) response. Although ferroelectrics are used in many technological applications, most do not attempt to exploit the viscoelastic response of ferroelectrics, mainly due to a lack of understanding and accurate models for their description and prediction. Thus, the aim of this thesis research is to gain better understanding of the influence of domain evolution in ferroelectrics on their dynamic mechanical response. There have been few studies on the viscoelastic properties of ferroelectrics, mainly due to a lack of experimental methods. Therefore, an apparatus and method called Broadband Electromechanical Spectroscopy (BES) was designed and built. BES allows for the simultaneous application of dynamic mechanical and electrical loading in a vacuum environment. Using BES, the dynamic stiffness and loss tangent in bending and torsion of a particular ferroelectric, viz. lead zirconate titanate (PZT), was characterized for different combinations of electrical and mechanical loading frequencies throughout the entire electric displacement hysteresis. Experimental results showed significant increases in loss tangent (by nearly an order of magnitude) and compliance during domain switching, which shows promise as a new approach to structural damping. A continuum model of the viscoelasticity of ferroelectrics was developed, which incorporates microstructural evolution via internal variables and associated kinetic relations. For the first time, through a new linearization process, the incremental dynamic stiffness and loss tangent of materials were computed throughout the entire electric displacement hysteresis for different combinations of mechanical and electrical loading frequencies. The model accurately captured experimental results. Using the understanding gained from the characterization and modeling of PZT, two applications of domain switching kinetics were explored by using Micro Fiber Composites (MFCs). Proofs of concept of set-and-hold actuation and structural damping using MFCs were demonstrated.

On Ultrafast Time-Domain TeraHertz Spectroscopy in the Condensed Phase: Linear Spectroscopic Measurements of Hydrogen-Bond Dynamics of Astrochemical Ice Analogs and Nonlinear TeraHertz Kerr Effect Measurements of Vibrational Quantum Beats

Much of the chemistry that affects life on planet Earth occurs in the condensed phase. The TeraHertz (THz) or far-infrared (far-IR) region of the electromagnetic spectrum (from 0.1 THz to 10 THz, 3 cm^-1 to 300 cm^-1, or 3000 μm to 30 μm) has been shown to provide unique possibilities in the study of condensed-phase processes. The goal of this work is to expand the possibilities available in the THz region and undertake new investigations of fundamental interest to chemistry. Since we are fundamentally interested in condensed-phase processes, this thesis focuses on two areas where THz spectroscopy can provide new understanding: astrochemistry and solvation science. To advance these fields, we had to develop new instrumentation that would enable the experiments necessary to answer new questions in either astrochemistry or solvation science. We first developed a new experimental setup capable of studying astrochemical ice analogs in both the TeraHertz (THz), or far-Infrared (far-IR), region (0.3 - 7.5 THz; 10 - 250 cm^-1) and the mid-IR (400 - 4000 cm^-1). The importance of astrochemical ices lies in their key role in the formation of complex organic molecules, such as amino acids and sugars in space. Thus, the instruments are capable of performing variety of spectroscopic studies that can provide especially relevant laboratory data to support astronomical observations from telescopes such as the Herschel Space Telescope, the Stratospheric Observatory for Infrared Astronomy (SOFIA), and the Atacama Large Millimeter Array (ALMA). The experimental apparatus uses a THz time-domain spectrometer, with a 1750/875 nm plasma source and a GaP detector crystal, to cover the bandwidth mentioned above with ~10 GHz (~0.3 cm^-1) resolution.

Using the above instrumentation, experimental spectra of astrochemical ice analogs of water and carbon dioxide in pure, mixed, and layered ices were collected at different temperatures under high vacuum conditions with the goal of investigating the structure of the ice. We tentatively observe a new feature in both amorphous solid water and crystalline water at 33 cm^-1 (1 THz). In addition, our studies of mixed and layered ices show how it is possible to identify the location of carbon dioxide as it segregates within the ice by observing its effect on the THz spectrum of water ice. The THz spectra of mixed and layered ices are further analyzed by fitting their spectra features to those of pure amorphous solid water and crystalline water ice to quantify the effects of temperature changes on structure. From the results of this work, it appears that THz spectroscopy is potentially well suited to study thermal transformations within the ice.

To advance the study of liquids with THz spectroscopy, we developed a new ultrafast nonlinear THz spectroscopic technique: heterodyne-detected, ultrafast THz Kerr effect (TKE) spectroscopy. We implemented a heterodyne-detection scheme into a TKE spectrometer that uses a stilbazoiumbased THz emitter, 4-N,N-dimethylamino-4-N-methyl-stilbazolium 2,4,6-trimethylbenzenesulfonate (DSTMS), and high numerical aperture optics which generates THz electric field in excess of 300 kV/cm, in the sample. This allows us to report the first measurement of quantum beats at terahertz (THz) frequencies that result from vibrational coherences initiated by the nonlinear, dipolar interaction of a broadband, high-energy, (sub)picosecond THz pulse with the sample. Our instrument improves on both the frequency coverage, and sensitivity previously reported; it also ensures a backgroundless measurement of the THz Kerr effect in pure liquids. For liquid diiodomethane, we observe a quantum beat at 3.66 THz (122 cm^-1), in exact agreement with the fundamental transition frequency of the υ4 vibration of the molecule. This result provides new insight into dipolar vs. Raman selection rules at terahertz frequencies.

To conclude we discuss future directions for the nonlinear THz spectroscopy in the Blake lab. We report the first results from an experiment using a plasma-based THz source for nonlinear spectroscopy that has the potential to enable nonlinear THz spectra with a sub-100 fs temporal resolution, and how the optics involved in the plasma mechanism can enable THz pulse shaping. Finally, we discuss how a single-shot THz detection scheme could improve the acquisition of THz data and how such a scheme could be implemented in the Blake lab. The instruments developed herein will hopefully remain a part of the groups core competencies and serve as building blocks for the next generation of THz instrumentation that pushes the frontiers of both chemistry and the scientific enterprise as a whole.

Some biological features of Saprolegnia parasitica Coker - cause of fish dermatomycosis. [Translation from: Pervaya nauchnaya konferentsiya molodykh Uchenykh Biologov (Tezisy Dokladov) pp.84-86. Kiev, A.N.Ukr. SSR., 1964]

Parasitic and infectious diseases of fish, of wide distribution in fish-rearing ponds, retard to a significant extent the development of fish culture in the Ukraine. One of the diseases of fish attracting attention in connection with the general distribution of its causative agent, the fungus Saprolegnia parasitica Coker, in water-bodies of various types, appears to be dermatomycosis. The aim of this investigation is to study the conditions favouring the development of S. parasitica. Among the studied factors were water temperature and oxygen content.