Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC)

GRC is a cementitious composite material made up of a cement mortar matrix and chopped glass fibers. Due to its outstanding mechanical properties, GRC has been widely used to produce cladding panels and some civil engineering elements. Impact failure of cladding panels made of GRC may occur during production if some tool falls onto the panel, due to stone or other objects impacting at low velocities or caused by debris projected after a blast. Impact failure of a front panel of a building may have not only an important economic value but also human lives may be at risk if broken pieces of the panel fall from the building to the pavement. Therefore, knowing GRC impact strength is necessary to prevent economic costs and putting human lives at risk. One-stage light gas gun is an impact test machine capable of testing different materials subjected to impact loads. An experimental program was carried out, testing GRC samples of five different formulations, commonly used in building industry. Steel spheres were shot at different velocities on square GRC samples. The residual velocity of the projectiles was obtained both using a high speed camera with multiframe exposure and measuring the projectile’s penetration depth in molding clay blocks. Tests were performed on young and artificially aged GRC samples to compare GRC’s behavior when subjected to high strain rates. Numerical simulations using a hydrocode were made to analyze which parameters are most important during an impact event. GRC impact strength was obtained from test results. Also, GRC’s embrittlement, caused by GRC aging, has no influence on GRC impact behavior due to the small size of the projectile. Also, glass fibers used in GRC production only maintain GRC panels’ integrity but have no influence on GRC’s impact strength. Numerical models have reproduced accurately impact tests.

Development of corrosion of steel bars embedded in mortar made with slag from secondary metallurgy

The aim of this work is to study the evolution of the corrosion rate of reinforcements embedded in mortar specimens that have been partly or fully replaced by the sand ladle furnace white slag. Prisms are manufactured mortar 6cm x 8cm x 2cm in which are embedded reinforcing steel bars of 6mm diameter B500SD. At the time of mixing were added varying amounts of chloride ion content by weight of cement (0%, 0.4%, 0.8%, 1.2%, 2%). The specimens were made totally or partially replacing the white slag, getting four different mixes depending on the degree of substitution. After curing the specimens for 28 days in moist chambers proceeded to dry up naturally. Here are gradually dampened by its conservation in a moist chamber, periodically measuring the corrosion rate of the bars using the technique of polarization curve. The results, in terms of corrosion current and corrosion potential, were compared with those obtained on standard samples, without replacement by slag aggregate. The analysis of results allows us to know, depending on the type of mortar used, the chloride threshold with the depassivation produced steel and the corrosion rates achieved in steels in the active state in terms of mortar moisture, obtained from qualitatively using gravimetric techniques. The results achieved to date support the conclusion that no significant differences in the behavior against corrosion induced by chloride ions, between the steel bars embedded in standard samples and the steel bars embedded in samples including with aggregates from slag. Both the chloride threshold resulting in the depassivation steel as the corrosion rate reached through the bars in an active state are very similar in both types of mortars when they have the same moisture content.

Is Europe ready to provide a pan-European Identity Management System?

European public administrations must manage citizens' digital identities, particularly considering interoperability among different countries. Owing to the diversity of electronic identity management (eIDM) systems, when users of one such system seek to communicate with governments using a different system, both systems must be linked and understand each other. To achieve this, the European Union is working on an interoperability framework. This article provides an overview of eIDM systems' current state at a pan-European level. It identifies and analyzes issues on which agreement exists, as well as those that aren't yet resolved and are preventing the adoption of a large-scale model.

Analysis of the surface state of epi-ready Ge wafers

The surface state of Ge epi-ready wafers (such as those used on III-V multijunction solar cells) supplied by two different vendors has been studied using X-ray photoemission spectroscopy. Our experimental results show that the oxide layer on the wafer surface is formed by GeO and GeO2. This oxide layer thickness differs among wafers coming from different suppliers. Besides, several contaminants appear on the wafer surfaces, carbon and probably chlorine being common to every wafer, irrespective of its origin. Wafers from one of the vendors show the presence of carbonates at their surfaces. On such wafers, traces of potassium seem to be present too.

Construction elements made with recycled plastics

Ponencia sobre elementos constructivos elaborados con materiales reciclados

Definition and study of the innovative façade Natura, made of independent pre-vegetated and water storage type panels

Definition and study of the innovative façade Natura, made of independent pre-vegetated and water storage type panels

Proyectando entre ruinas : lógicas de intervención continua en la arquitectura contemporánea

Los cambios percibidos hacia finales del siglo XX y a principios del nuevo milenio, nos ha mostrado que la crisis cultural de la que somos participes refleja también una crisis de los modelos universales. Nuestra situación contemporánea, parece indicar que ya no es posible formular un sistema estético para atribuirle una vigencia universal e intemporal más allá de su estricta eficacia puntual. La referencia organizada, delimitada, invariable y específica que ofrecía cualquier emplazamiento, en tanto preexistencia, reflejaba una jerarquía del sistema formal basado en lo extensivo: la medida, las normas, el movimiento, el tiempo, la modulación, los códigos y las reglas. Sin embargo, actualmente, algunos aspectos que permanecían latentes sobre lo construido, emergen bajo connotaciones intensivas, transgrediendo la simple manifestación visual y expresiva, para centrase en las propiedades del comportamiento de la materia y la energía como determinantes de un proceso de adaptación en el entorno. A lo largo del todo el siglo XX, el desarrollo de la relación del proyecto sobre lo construido ha sido abordado, casi en exclusiva, entre acciones de preservación o intervención. Ambas perspectivas, manifestaban esfuerzos por articular un pensamiento que diera una consistencia teórica, como soporte para la producción de la acción aditiva. No obstante, en las últimas décadas de finales de siglo, la teoría arquitectónica terminó por incluir pensamientos de otros campos que parecen contaminar la visión sesgada que nos refería lo construido. Todo este entramado conceptual previo, aglomeraba valiosos intentos por dar contenido a una teoría que pudiese ser entendida desde una sola posición argumental. Es así, que en 1979 Ignasi Solá-Morales integró todas las imprecisiones que referían una actuación sobre una arquitectura existente, bajo el termino de “intervención”, el cual fue argumentado en dos sentidos: El primero referido a cualquier tipo de actuación que se puede hacer en un edificio, desde la defensa, preservación, conservación, reutilización, y demás acciones. Se trata de un ámbito donde permanece latente el sentido de intensidad, como factor común de entendimiento de una misma acción. En segundo lugar, más restringido, la idea de intervención se erige como el acto crítico a las ideas anteriores. Ambos representan en definitiva, formas de interpretación de un nuevo discurso. “Una intervención, es tanto como intentar que el edificio vuelva a decir algo o lo diga en una determinada dirección”. A mediados de 1985, motivado por la corriente de revisión historiográfica y la preocupación del deterioro de los centros históricos que recorría toda Europa, Solá-Morales se propone reflexionar sobre “la relación” entre una intervención de nueva arquitectura y la arquitectura previamente existente. Relación condicionada estrictamente bajo consideraciones lingüísticas, a su entender, en sintonía con toda la producción arquitectónica de todo el siglo XX. Del Contraste a la Analogía, resumirá las transformaciones en la concepción discursiva de la intervención arquitectónica, como un fenómeno cambiante en función de los valores culturales, pero a su vez, mostrando una clara tendencia dialógica entres dos categorías formales: El Contraste, enfatizando las posibilidades de la novedad y la diferencia; y por otro lado la emergente Analogía, como una nueva sensibilidad de interpretación del edificio antiguo, donde la semejanza y la diversidad se manifiestan simultáneamente. El aporte reflexivo de los escritos de Solá-Morales podría ser definitivo, si en las últimas décadas antes del fin de siglo, no se hubiesen percibido ciertos cambios sobre la continuidad de la expresión lingüística que fomentaba la arquitectura, hacia una especie de hipertrofia figurativa. Entre muchos argumentos: La disolución de la consistencia compositiva y el estilo unitario, la incorporación volumétrica del proyecto como dispositivo reactivo, y el cambio de visión desde lo retrospectivo hacia lo prospectivo que sugiere la nueva conservación. En este contexto de desintegración, el proyecto, en tanto incorporación o añadido sobre un edificio construido, deja de ser considerado como un apéndice volumétrico subordinado por la reglas compositivas y formales de lo antiguo, para ser considerado como un organismo de orden reactivo, que produce en el soporte existente una alteración en su conformación estructural y sistémica. La extensión, antes espacial, se considera ahora una extensión sensorial y morfológica con la implementación de la tecnología y la hiper-información, pero a su vez, marcados por una fuerte tendencia de optimización energética en su rol operativo, ante el surgimiento del factor ecológico en la producción contemporánea. En una sociedad, como la nuestra, que se está modernizando intensamente, es difícil compartir una adecuada sintonía con las formas del pasado. Desde 1790, fecha de la primera convención francesa para la conservación de monumentos, la escala de lo que se pretende preservar es cada vez más ambiciosa, tanto es así, que al día de hoy el repertorio de lo que se conserva incluye prácticamente todas las tipologías del entorno construido. Para Koolhaas, el intervalo entre el objeto y el momento en el cual se decide su conservación se ha reducido, desde dos milenios en 1882 a unas décadas hoy en día. En breve este lapso desaparecerá, demostrando un cambio radical desde lo retrospectivo hacia lo prospectivo, es decir, que dentro de poco habrá que decidir que es lo que se conserva antes de construir. Solá-Morales, en su momento, distinguió la relación entre lo nuevo y lo antiguo, entre el contraste y la analogía. Hoy casi tres décadas después, el objetivo consiste en evaluar si el modelo de intervención arquitectónica sobre lo construido se ha mantenido desde entonces o si han aparecido nuevas formas de posicionamiento del proyecto sobre lo construido. Nuestro trabajo pretende demostrar el cambio de enfoque proyectual con la preexistencia y que éste tiene estrecha relación con la incorporación de nuevos conceptos, técnicas, herramientas y necesidades que imprimen el contexto cultural, producido por el cambio de siglo. Esta suposición nos orienta a establecer un paralelismo arquitectónico entre los modos de relación en que se manifiesta lo nuevo, entre una posición comúnmente asumida (Tópica), genérica y ortodoxa, fundamentada en lo visual y expresivo de las últimas décadas del siglo XX, y una realidad emergente (Heterotópica), extraordinaria y heterodoxa que estimula lo inmaterial y que parece emerger con creciente intensidad en el siglo XXI. Si a lo largo de todo el siglo XX, el proyecto de intervención arquitectónico, se debatía entre la continuidad y discontinuidad de las categorías formales marcadas por la expresión del edificio preexistente, la nueva intervención contemporánea, como dispositivo reactivo en el paisaje y en el territorio, demanda una absoluta continuidad, ya no visual, expresiva, ni funcional, sino una continuidad fisiológica de adaptación y cambio con la propia dinámica del territorio, bajo nuevas reglas de juego y desplegando planes y estrategias operativas (proyectivas) desde su propia lógica y contingencia. El objeto de esta investigación es determinar los nuevos modos de continuidad y las posibles lógicas de producción que se manifiestan dentro de la Intervención Arquitectónica, intentando superar lo aparente de su relación física y visual, como resultado de la incorporación del factor operativo desplegado por el nuevo dispositivo contemporáneo. Creemos que es acertado mantener la senda connotativa que marca la denominación intervención arquitectónica, por aglutinar conceptos y acercamientos teóricos previos que han ido evolucionando en el tiempo. Si bien el término adolece de mayor alcance operativo desde su formulación, una cualidad que infieren nuestras lógicas contemporáneas, podría ser la reformulación y consolidación de un concepto de intervención más idóneo con nuestros tiempos, anteponiendo un procedimiento lógico desde su propia necesidad y contingencia. Finalmente, nuestro planteamiento inicial aspira a constituir un nueva forma de reflexión que nos permita comprender las complejas implicaciones que infiere la nueva arquitectura sobre la preexistencia, motivada por las incorporación de factores externos al simple juicio formal y expresivo preponderante a finales del siglo XX. Del mismo modo, nuestro camino propuesto, como alternativa, permite proyectar posibles sendas de prospección, al considerar lo preexistente como un ámbito que abarca la totalidad del territorio con dinámicas emergentes de cambio, y con ellas, sus lógicas de intervención.Abstract The perceived changes towards the end of the XXth century and at the beginning of the new milennium have shown us that the cultural crisis in which we participate also reflects a crisis of the universal models. The difference between our contemporary situation and the typical situations of modern orthodoxy and post-modernistic fragmentation, seems to indicate that it is no longer possible to formulate a valid esthetic system, to assign a universal and eternal validity to it beyond its strictly punctual effectiveness; which is even subject to questioning because of the continuous transformations that take place in time and in the sensibility of the subject itself every time it takes over the place. The organised reference that any location offered, limited, invariable and specific, while pre-existing, reflected a hierarchy of the formal system based on the applicable: measure, standards, movement, time, modulation, codes and rules. Authors like Marshall Mc Luhan, Paul Virilio, or Marc Augé anticipated a reality where the conventional system already did not seem to respond to the new architectural requests in which information, speed, disappearance and the virtual had blurred the traditional limits of place; pre-existence did no longer possess a specific delimitation and, on the contrary, they expect to reach a global scale. Currently, some aspects that stayed latent relating to the constructed, surface from intensive connotations, transgressing the simple visual and expressive manifestation in order to focus on the traits of the behaviour of material and energy as determinants of a process of adaptation to the surroundings. Throughout the entire Century, the development of the relation of the project relating to the constructed has been addressed, almost exclusively, in preservational or interventianal actions. Both perspectives showed efforts in order to express a thought that would give a theoretical consistency as a base for the production of the additive action. Nevertheless, the last decades of the Century, architectural theory ended up including thoughts from other fields that seem to contaminate the biased vision 15 which the constructed related us. Ecology, planning, philosophy, global economy, etc, suggest new approaches to the construction of the contemporary city; but this time with a determined idea of change and continuous transformation, that enriches the panorama of thought and architectural practice, at the same time, according to some, it puts disciplinary specification at risk, given that there is no architecture without destruction, the constructed organism requires mutation in order to adjust to the change of shape. All of this previous conceptual framework gathered valuable intents to give importance to a theory that could be understood solely from an argumental position. Thusly, in 1979 Ignasi Solá-Morales integrated all of the imprecisions that referred to an action in existing architecture under the term of “Intervention”, which was explained in two ways: The first referring to any type of intervention that can be carried out in a building, regarding protection, conservation, reuse, etc. It is about a scope where the meaning of intensity stays latent as a common factor of the understanding of a single action. Secondly, more limitedly, the idea of intervention is established as the critical act to the other previous ideas such as restauration, conservation, reuse, etc. Both ultimately represent ways of interpretation of a new speech. “An intervention, is as much as trying to make the building say something again or that it be said in a certain direction”. Mid 1985, motivated by the current of historiographical revision and the concerns regarding the deterioration of historical centres that traversed Europe, Solá-Morales decides to reflect on “the relationship” between an intervention of the new architecture and the previously existing architecture. A relationship determined strictly by linguistic considerations, to his understanding, in harmony with all of the architectural production of the XXth century. From Contrast to Analogy would summarise transformations in the discursive perception of architectural intervention, as a changing phenomenon depending on cultural values, but at the same time, showing a clear dialogical tendency between two formal categories: Contrast, emphasising the possibilities of novelty and difference; and on the other hand the emerging Analogy, as a new awareness of interpretation of the ancient building, where the similarity and diversity are manifested simultaneously. For Solá-Morales the analogical procedure is not based on the visible simultaneity of formal orders, but on associations that the subject establishes throughout time. Through analogy it is tried to overcome the simple visual relationship with the antique, to focus on its spacial, physical and geographical nature. If the analogical attempt guides an opening towards a new continuity; it still persists in the connection of dimensional, typological and figurative factors, subordinate to the formal hierarchy of the preexisting subjects. 16 The reflexive contribution of Solá-Morales’ works could be final, if in the last decades before the end of the century there had not been certain changes regarding linguistic expression, encouraged by architecture, towards a kind of figurative hypertrophy, amongst many arguments we are in this case interested in three moments: The dissolution of the compositional consistency and the united style, the volumetric incorporation of the project as a reactive mechanism, and the change of the vision from retrospective towards prospective that the new conservation suggests. The recurrence to the history of architecture and its recognisable forms, as a way of perpetuating memory and establishing a reference, dissolved any instinct of compositive unity and style, provoking permanent relationships to tend to disappear. The composition and coherence lead to suppose a type of discontinuity of isolated objects in which only possible relationships could appear; no longer as an order of certain formal and compositive rules, but as a special way of setting elements in a specific work. The new globalised field required new forms of consistency between the project and the pre-existent subject, motivated amongst others by the higher pace of market evolution, increase of consumer tax and the level of information and competence between different locations; aspects which finally made stylistic consistence inefficient. In this context of disintegration, the project, in incorporation as well as added to a constructed building, stops being considered as a volumetric appendix subordinate to compositive and formal rules of old, to be considered as an organism of reactive order, that causes a change in the structural and systematic configuration of the existing foundation. The extension, previsouly spatial, is now considered a sensorial and morphological extension, with the implementation of technology and hyper-information, but at the same time, marked by a strong tendency of energetic optimization in its operational role, facing the emergence of the ecological factor in contemporary production. The technological world turns into a new nature, a nature that should be analysed from ecological terms; in other words, as an event of transition in the continuous redistribution of energy. In this area, effectiveness is not only determined by the capacity of adaptation to changing conditions, but also by its transforming capacity “expressly” in order to change an environment. In a society, like ours, that is modernising intensively, it is difficult to share an adecuate agreement with the forms of the past. From 1790, the date of the first French convention for the conservation of monuments, the scale of what is expexted to be preserved is more and more ambitious, so much so that nowadays the repertoire of that what is conserved includes practically all typologies of the constructed surroundings. For Koolhaas, the ínterval between the object and the moment when its conservation is decided has been reduced, from two 17 milennia in 1882 to a few decades nowadays. Shortly this lapse will disappear, showing a radical change of retrospective towards prospective, that is to say, that soon it will be necessary to decide what to conserve before constructing. The shapes of cities are the result of the continuous incorporation of architecture, and perhaps that only through architecture the response to the universe can be understood, the continuity of what has already been constructed. Our work is understood also within that system, modifying the field of action and leaving the road ready for the next movement of those that will follow after us. Continuity does not mean conservatism, continuity means being conscient of the transitory value of our answers to specific needs, accepting the change that we have received. That what has been constructed to remain and last, should cause future interventions to be integrated in it. It is necessary to accept continuity as a rule. Solá-Morales, in his time, distinguished between the relationship with new and old, between contrast and analogy. Today, almost three decades later, the objective consists of evaluating whether the model of architectural intervention in the constructed has been maintained since then or if new ways of positioning the project regarding the constructed have appeared. Our work claims to show the change of the approach of projects with pre-existing subjects and that this has got a close relation to the incorporation of new concepts, techniques, tools and necessities that impress the cultural context, caused by the change of centuries. This assumption guides us to establish a parallelism between the forms of connection where that what is new is manifested between a commonly assumed (topical), generic and orthodox position, based on that what is visual and expressive in the last decades of the XXth century, and an emerging (heterotopical), extraordinary and heterodox reality that stimulates the immaterial and that seems to emerge with growing intensity in the XXIst century. If throughout the XXth century the project of architectural intervention was considered from the continuity and discontinuity of formal categories, marked by the expression of the pre-existing building, the new contemporary intervention, as a reactive device in the landscape and territory, demands an absolute continuity. No longer a visual, expressive or functional one but a morphological continuity of adaptation and change with its own territorial dynamics, under new game rules and unfolding new operative (projective) strategies from its own logic and contingency. 18 The aim of this research is to determine new forms of continuity and the possible logic of production that are expressed in the Architectural Intervention, trying to overcome the obviousness of its physical and visual relationship, at the beginning of this new century, as a result of the incorporation of the operative factor that the new architectural device unfolds. We think it is correct to maintain the connotative path that marks the name architectural intervention by bringing previous concepts and theorical approaches that have been evolving through time together. If the name suffers from a wider operational range because of its formulation, a quality that our contemporary logic provokes, the reformulation and consolidation of an interventional concept could be more suitable for our times, giving preference to a logical method from its own necessity and contingency. It seems that now time shapes the topics, it is no longer about materialising a certain time but about expressing the changes that its new temporality generates. Finally, our initial approach aspires to form a new way of reflection that permits us to understand the complex implications that the new architecture submits the pre-existing subject to, motivated by the incorporation of factors external to simple formal and expressive judgement, prevailing at the end of the XXth century. In the same way, our set road, as an alternative, permits the contemplation of possible research paths, considering that what is pre-existing as an area that spans the whole territory with emerging changing dynamics and, with them, their interventional logics.

Integración de baterías en sistemas fotovoltaicos conectados a red

La situación actual del mercado energético en España y el imparable aumento de las tasas por parte de las eléctricas, está fomentando la búsqueda de fuentes de energía alternativas que permitan a la población poder abastecerse de electricidad, sin tener que pagar unos costes tan elevados. Para cubrir esta necesidad, la energía fotovoltaica y sobretodo el autoconsumo con inyección a red o balance neto, está adquiriendo cada vez más importancia dentro del mundo energético. Pero la penetración de esta tecnología en la Red Eléctrica Española tiene un freno, la desconfianza por parte del operador de la red, ya que la fotovoltaica es una fuente de energía intermitente, que puede introducir inestabilidades en el sistema en caso de alta penetración. Por ello se necesita ganar la confianza de las eléctricas, haciendo que sea una energía predecible, que aporte potencia a la red eléctrica cuando se le pida y que opere participando en la regulación de la frecuencia del sistema eléctrico. Para tal fin, el grupo de investigación de Sistemas Fotovoltaicos, perteneciente al IES de la UPM, está llevando a cabo un proyecto de investigación denominado PV CROPS, financiado por la Comisión Europea, y que tiene por objetivo desarrollar estas estrategias de gestión. En este contexto, el objetivo de este Proyecto Fin de Carrera consiste en implementar un Banco de Ensayos con Integración de Baterías en Sistemas FV Conectados a Red, que permita desarrollar, ensayar y validar estas estrategias. Aprovechando la disponibilidad para usar el Hogar Digital, instalado en la EUITT de la UPM, hemos montado el banco de ensayos en un laboratorio contiguo, y así, poder utilizar este Hogar como un caso real de consumos energéticos de una vivienda. Este banco de ensayos permitirá obtener información de la energía generada por la instalación fotovoltaica y del consumo real de la "casa" anexa, para desarrollar posteriormente estrategias de gestión de la electricidad. El Banco de Ensayos está compuesto por tres bloques principales, interconectados entre sí:  Subsistema de Captación de Datos y Comunicación. Encargado de monitorizar los elementos energéticos y de enviar la información recopilada al Subsistema de Control. Formado por analizadores de red eléctrica, monofásicos y de continua, y una pasarela orientada a la conversión del medio físico Ethernet a RS485.  Subsistema de Control. Punto de observación y recopilación de toda la información que proviene de los elementos energéticos. Es el subsistema donde se crearán y se implementarán estrategias de control energético. Compuesto por un equipo Pxie, controlador empotrado en un chasis de gama industrial, y un equipo PC Host, compuesto por una workstation y tres monitores.  Subsistema de Energía. Formado por los elementos que generan, controlan o consumen energía eléctrica, en el Banco de Ensayos. Constituido por una pérgola FV, un inversor, un inversor bidireccional y un bloque de baterías. El último paso ha sido llevar a cabo un Ejemplo de Aplicación Práctica, con el que hemos probado que el Banco de Ensayos está listo para usarse, es operativo y completamente funcional en operaciones de monitorización de generación energética fotovoltaica y consumo energético. ABSTRACT. The current situation of the energetic market in Spain and the unstoppable increase of the tax on the part of the electrical companies, is promoting the search of alternative sources of energy that allow to the population being able to be supplied of electricity, without having to pay so high costs. To meet this need, the photovoltaic power and above all the self-consumption with injection to network, it is increasingly important inside the energetic world. It allows to the individual not only to pay less for the electricity, in addition it allows to obtain benefits for the energy generated in his own home. But the penetration of this technology in the Electrical Spanish Network has an obstacle, the distrust on the part of the operator of the electrical network, due to the photovoltaic is an intermittent source of energy, which can introduce instabilities in the system in case of high penetration. Therefore it´s necessary to reach the confidence of the electricity companies, making it a predictable energy, which provides with power to the electrical network whenever necessary and that operates taking part in the regulation of the frequency of the electric system. For such an end, the group of system investigation Photovoltaic, belonging to the IES of the UPM, there is carrying out a project of investigation named PV CROPS, financed by the European Commission, and that has for aim to develop these strategies of management. In this context, the objective of this Senior Thesis consists in implementing a Bank of Tests with Integration of Batteries in Photovoltaic Systems Connected to Network, which allows developing, testing and validating these strategies. Taking advantage of the availability to use the Digital Home installed in the EUITT of the UPM, we have mounted the bank of tests in a contiguous laboratory to use this Home as a real case of energetic consumptions of a house. This bank of tests will allow obtaining information of the energy generated by the photovoltaic installation and information of the royal consumption of the attached "house", to develop later strategies of management of the electricity. The Bank of Tests is composed by three principal blocks, interconnected each other:  Subsystem of Gathering of data and Communication. In charge of monitoring the energetic elements and sending the information compiled to the Subsystem of Control. Formed by power analyzers, AC and DC, and a gateway for the conversion of the Ethernet physical medium to RS485.  Subsystem of Control. Point of observation and compilation of all the information that comes from the energetic elements. It is the subsystem where there will be created and there will be implemented strategies of energetic control. Composed of a Pxie, controller fixed in an industrial range chassis, and a PC Host, formed by a workstation and three monitors.  Subsystem of Energy. Formed by the elements of generating, controlling or consuming electric power, in the Bank of Tests. Made of photovoltaic modules, an inverter, a twoway inverter and a batteries block. The last step has been performing an Example of Practical Application we have proved that the Bank of Tests is ready to be used, it´s operative and fully functional in monitoring operations of energetic photovoltaic generation and energetic consumption.

Dynamic Response Optimization of Vehicles through Efficient Multibody Formulations and Automatic Differentiation Techniques

El diseño y desarrollo de sistemas de suspensión para vehículos se basa cada día más en el diseño por ordenador y en herramientas de análisis por ordenador, las cuales permiten anticipar problemas y resolverlos por adelantado. El comportamiento y las características dinámicas se calculan con precisión, bajo coste, y recursos y tiempos de cálculo reducidos. Sin embargo, existe una componente iterativa en el proceso, que requiere la definición manual de diseños a través de técnicas “prueba y error”. Esta Tesis da un paso hacia el desarrollo de un entorno de simulación eficiente capaz de simular, analizar y evaluar diseños de suspensiones vehiculares, y de mejorarlos hacia la solución optima mediante la modificación de los parámetros de diseño. La modelización mediante sistemas multicuerpo se utiliza aquí para desarrollar un modelo de autocar con 18 grados de libertad, de manera detallada y eficiente. La geometría y demás características de la suspensión se ajustan a las del vehículo real, así como los demás parámetros del modelo. Para simular la dinámica vehicular, se utiliza una formulación multicuerpo moderna y eficiente basada en las ecuaciones de Maggi, a la que se ha incorporado un visor 3D. Así, se consigue simular maniobras vehiculares en tiempos inferiores al tiempo real. Una vez que la dinámica está disponible, los análisis de sensibilidad son cruciales para una optimización robusta y eficiente. Para ello, se presenta una técnica matemática que permite derivar las variables dinámicas dentro de la formulación, de forma algorítmica, general, con la precisión de la maquina, y razonablemente eficiente: la diferenciación automática. Este método propaga las derivadas con respecto a las variables de diseño a través del código informático y con poca intervención del usuario. En contraste con otros enfoques en la bibliografía, generalmente particulares y limitados, se realiza una comparación de librerías, se desarrolla una formulación híbrida directa-automática para el cálculo de sensibilidades, y se presentan varios ejemplos reales. Finalmente, se lleva a cabo la optimización de la respuesta dinámica del vehículo citado. Se analizan cuatro tipos distintos de optimización: identificación de parámetros, optimización de la maniobrabilidad, optimización del confort y optimización multi-objetivo, todos ellos aplicados al diseño del autocar. Además de resultados analíticos y gráficos, se incluyen algunas consideraciones acerca de la eficiencia. En resumen, se mejora el comportamiento dinámico de vehículos por medio de modelos multicuerpo y de técnicas de diferenciación automática y optimización avanzadas, posibilitando un ajuste automático, preciso y eficiente de los parámetros de diseño. ABSTRACT Each day, the design and development of vehicle suspension systems relies more on computer-aided design and computer-aided engineering tools, which allow anticipating the problems and solving them ahead of time. Dynamic behavior and characteristics are thus simulated accurately and inexpensively with moderate computational times and resources. There is, however, an iterative component in the process, which involves the manual definition of designs in a trialand-error manner. This Thesis takes a step towards the development of an efficient simulation framework capable of simulating, analyzing and evaluating vehicle suspension designs, and automatically improving them by varying the design parameters towards the optimal solution. The multibody systems approach is hereby used to model a three-dimensional 18-degrees-of-freedom coach in a comprehensive yet efficient way. The suspension geometry and characteristics resemble the ones from the real vehicle, as do the rest of vehicle parameters. In order to simulate vehicle dynamics, an efficient, state-of-the-art multibody formulation based on Maggi’s equations is employed, and a three-dimensional graphics viewer is developed. As a result, vehicle maneuvers can be simulated faster than real-time. Once the dynamics are ready, a sensitivity analysis is crucial for a robust optimization. To that end, a mathematical technique is introduced, which allows differentiating the dynamic variables within the multibody formulation in a general, algorithmic, accurate to machine precision, and reasonably efficient way: automatic differentiation. This method propagates the derivatives with respect to the design parameters throughout the computer code, with little user interaction. In contrast with other attempts in the literature, mostly not generalpurpose, a benchmarking of libraries is carried out, a hybrid direct-automatic differentiation approach for the computation of sensitivities is developed, and several real-life examples are analyzed. Finally, a design optimization process of the aforementioned vehicle is carried out. Four different types of dynamic response optimization are presented: parameter identification, handling optimization, ride comfort optimization and multi-objective optimization; all of which are applied to the design of the coach example. Together with analytical and visual proof of the results, efficiency considerations are made. In summary, the dynamic behavior of vehicles is improved by using the multibody systems approach, along with advanced differentiation and optimization techniques, enabling an automatic, accurate and efficient tuning of design parameters.

Fracture behaviour of notched round bars made of PMMA subjected to torsion at -60 °C

This paper presents seventy new experimental results from PMMA notched specimens tested under torsion at 60 C. The notch root radius ranges from 0.025 to 7.0 mm. At this temperature the non-linear effects previously observed on specimens of the same material tested at room temperature strongly reduce. The averaged value of the strain energy density over a control volume is used to assess the critical loads to failure. The radius of the control volume and the critical strain energy density are evaluated a priori by using in combination the mode III critical stress intensity factor from cracked-like specimens and the critical stress to failure detected from semicircular notches with a large notch root radius

Residual stress distribution in ferritic-austenitic steel joints made by laser welding

The present investigation addresse the influence of laser welding process-ing parameters used for joining dis-similar metals (ferritic to austenitic steel), on the induced residual stress field. Welding was performed on a Nd:YAG laser DY033 (3300 W) in a continuous wave (CW), keyhole mode. The base metals (BM) employed in this study are AISI 1010 carbon steel (CS) and AISI 304L austenitic stainless steel (SS). Pairs of dissimilar plates of 200 mm x 45 mm x 3 mm were butt joined by laser welding. Different sets of parameters were used to engineer the base metals apportionment at joint formation, namely distinct dilution rates. Residual strain scanning, carried out by neutron diffraction was used to assess the joints. Through-thickness residual stress maps were determined for the laser welded samples of dis-similar steels using high spatial reso-lution. As a result, an appropriate set of processing parameters, able to mi-nimize the local tensile residual stress associated to the welding process, was found.

Residual stress distribution in ferritic to austenitic steel joints made by laser welding,

In this study, autogenous laser welding was used to join thin plates of low carbon ferritic and austenitic stainless steel. Due to the differences in the thermo-physical properties of base metals, this kind of weld exhibits a complex microstructure, which frequently leads to an overall loss of joint quality. Four welded samples were prepared by using different sets of processing parameters, with the aim of minimizing the induced residual stress field. The dissimilar austenitic-ferritic joints obtained under all welding conditions were uniform and free of defects. Variations in beam position did not influence the weld geometiy, which is a typical keyhole welding. Microstructural characterization and residual strain scanning (by neutron diffraction) were used to assess the features of the joints. By varying laser beam power density and by displacing the laser beam towards the carbon steel side, an optimum combination of processing parameters was found.

Biosensing comparison between different geometries based on vertical submicron-structrures made of SU-8 resist

Previous work of the research group [1-4] demonstrated the viability of using periodic lattices of micro and nanopillars, called Bio-photonic sensing Cells (BICELLs), as an optical biosensor vertically characterized by visible spectrometry. Also we have studied theoretically [5] the performance of the BICELLs by 2D and 3D simulation in orde r to optimize the biosensing response. In this work we present the fabrication and biosensing comparison of different geometrical parameters on periodic lattices of pillars in order to discuss theoretical conclusions with these results. In this way, we have explored the biosensing response of other patter ns such as crosses, stars, cylinders, concentrical cylinders (Figure 1). Also we introduced a novel method to test the BICELLs in a cost-effective way by using an ultra-thin film of SU-8 spin-coated onto the patterns to reproduce the effect of a biofilm attached to the biosensor surface. Finally we have tested the biosensing response of the different geometries by the well-known Bovine Serum Albumin (BSA) immunoassay and compared with the theoretical simulation.

Med Capital Partners: plan de negocio de una EAFI

Med Capital Partners (MCP en adelante) es un empresa de asesoramiento financiero independiente (EAFI) que ofrecerá servicios de asesoramiento personalizado tanto a clientes particulares como a empresas, complementando su oferta con otros servicios auxiliares, que le permitan brindar a sus clientes una solución integral. MCP ha sido fundada por tres socios con formación y experiencia específica en el ámbito objeto del negocio, pero multidisciplinar para ofrecer un amplio espectro de servicios de calidad tanto en la Región de Murcia, donde va a establecer su sede, como en el resto de territorio nacional. MCP se crea con la firme misión de ofrecer servicios de asesoramiento y consulta financieros para la gestión y planificación patrimonial de calidad, de forma independiente y transparente y con la motivación de ser el médico de cabecera financiero de familias, particulares y empresas de todos los ámbitos, basándonos en arraigados valores entre los que predominan la transparencia, la independencia y la discreción. Una vez analizados los factores externos y haber realizado los planes de marketing, operaciones y financiero, nos encontramos en disposición de determinar que: 1.Existe un gran número de clientes potenciales. 2.Los factores político, social y legal favorecen la creación de este tipo de empresas. 3.Hay pocos competidores establecidos hasta la fecha. 4.No necesita complicadas infraestructuras ni requiere elevados gastos de aprovisionamiento. 5.Desde el año 2, se obtienen resultados positivos. La propuesta de valor de MCP está focalizada en ofrecer un servicio de calidad al menor precio posible, fijando una política de tarifas inferior a la media nacional y a la de nuestros competidores más cercanos, así como un esquema de precios descendentes para aquellos clientes que depositen su confianza en nosotros y renueven su contrato de asesoramiento continuado o contraten un combo de servicios. En términos operativos, el establecimiento de MCP requiere relativamente poco capital inicial, permitiendo ofrecer los primeros dividendos a los socios en un corto espacio temporal y teniendo desde el primer momento, un sueldo que les permita dedicarse plenamente al funcionamiento de MCP. En definitiva, creemos que MCP puede dar respuesta a una gran oportunidad de negocio existente en un sector en alza y en un mercado de arranque en el que hay una gran riqueza y poca cultura de inversión asesorada. ---ABSTRACT---Med Capital Partners (MCP) is an invest services company, which is established according to an EAFI structure. MCP will offer a custom-made service not only to individual clients but also to enterprises, with a wide range of supplementary services, including industrial strategy projects and all kind of financial processes demanded. MCP has been founded by three partners with proved training and specific experience based on the financial field but multitask and different between them, in order to offer various quality services in Región de Murcia, where it is going to be based, and also all around Spain. MCP is built with the firm mission of offering assessment and financial consulting quality services, helping with the patrimonial management and planning, doing it in an independent and transparent way, and always driving by the motivation of being the family doctor of individual and enterprise of sectors. To make it possible, MCP has deep values as excellence, wisdom and discretion. Once we have analyzed external factors and having made marketing, operations and financial plans, we are ready to determinate: 1.There is a big amount of potential customers. 2.Political, social and legal factors favor the formation of this type of business. 3.There are not many established competitors until now. 4.MCP does not need complex infrastructures either raised initial investment. 5.From year 2 and on, MCP is profitable. The value proposition of MCP is to focus on developing quality services with affordable fees, fixing a price policy under any other Spanish EAFI. MCP wants to build processes according to reality, working with reachable expectations and on real times. MCP is committed to the creation of stable, sustainable and consistent structures to adapt themselves to the individual risk profile of the customers, taking care of all of them. MCP wants to build a close relationship with clients and has developed a descending fee policy. MCP establishment does not require high initial resources and it is profitable in a short time, allowing investors to get their first dividends. Summarizing, we can say MCP is the answer of a big business opportunity within a rising and wealth market that only need a little help to emerge.