Determinação de fármacos diuréticos em associação por cromatografia em camada delgada e espectrofotometria

A rapid, sensitive and reliable thin-layer chromatography/spectrophotometry screening procedure was developed for quantitative determination of diuretics associated in pharmaceutical dosage forms. The chromatographic method employed microcrystalline cellulose and butanol : acetic acid : water (4:1:1) or amilic alcohol : ammonium hydroxide 25% (9:1) as mobile phases and detection by U.V. light. The drugs were extracted using a simple procedure and were quantified by U.V. spectrophotometry. Results varied from 97.5 to 102.5% and are similar to those obtained by conventional methods. This method of quantification of diuretics is promising for quality control of drugs.

Innovació empresarial en el procés de transmissió de dades mitjançant una aplicació mòbil

Disposar d’informació de qualitat, en el moment oportú i en el volum adequat és el que actualment necessiten les empreses per poder prendre decisions òptimes. L’empresa JCM Technologies no és una excepció i és en la obtenció d’informació del procés productiu de l’empresa on aquest projecte pren part. L’objectiu d’aquest projecte de final de màster ha consistit en desenvolupar un sistema capaç d’aportar a l’empresa informació sobre els resultats obtinguts durant el control de qualitat dels … [+]productes, informació de la qual no disposava. Les dades existien però no es podien convertir en informació valuosa perquè no es disposava d’un mecanisme capaç tractar-les. Per complir els objectius marcats s’ha creat un sistema format pels següents elements: una aplicació per dispositius mòbils Android, una base de dades, un nou programa pel control de la qualitat i aplicatiu servidor. L’aplicació permet obtenir i visualitzar la informació. La base de dades és on es guarda la informació que envia el programa del control de qualitat i finalment, l’aplicatiu servidor habilita la comunicació entre els diferents elements descrits. El fet que dóna valor al sistema és que tots els elements que el formen tenen la capacitat de comunicar-se entre ells mitjançant Internet. Gràcies a això, és possible obtenir informació a temps real de la producció que s’està portant a terme a qualsevol punt del món. En conclusió, cal dir que els objectius s’han complert ja que s’ha aconseguit un sistema ràpid i segur. D’aquesta manera JCM Technologies pot disposar d’una informació molt valuosa que li permet que certes decisions no siguin preses a l’atzar.

Optimizing of intelligence level in welding

The productivity, quality and cost efficiency of welding work are critical for metal industry today. Welding processes must get more effective and this can be done by mechanization and automation. Those systems are always expensive and they have to pay the investment back. In this case it is really important to optimize the needed intelligence and this way needed automation level, so that a company will get the best profit. This intelligence and automation level was earlier classified in several different ways which are not useful for optimizing the process of automation or mechanization of welding. In this study the intelligence of a welding system is defined in a new way to enable the welding system to produce a weld good enough. In this study a new way is developed to classify and select the internal intelligence level of a welding system needed to produce the weld efficiently. This classification contains the possible need of human work and its effect to the weld and its quality but does not exclude any different welding processes or methods. In this study a totally new way is developed to calculate the best optimization for the needed intelligence level in welding. The target of this optimization is the best possible productivity and quality and still an economically optimized solution for several different cases. This new optimizing method is based on grounds of product type, economical productivity, the batch size of products, quality and criteria of usage. Intelligence classification and optimization were never earlier made by grounds of a made product. Now it is possible to find the best type of welding system needed to welddifferent types of products. This calculation process is a universal way for optimizing needed automation or mechanization level when improving productivity of welding. This study helps the industry to improve productivity, quality and cost efficiency of welding workshops.

Kokoonpantavuuden parantaminen uusien konepajatuotteiden verkostotuotannossa

Verkostotoiminta asettaa haasteita suunnittelutyölle, valmistukselle, hankintatoimelle ja laadunhallinnalle, jotka kaikki vaikuttavat kokoonpanon sujuvuuteen. Suunnittelun ja valmistuksen yhteistyö on entistäkin haasteellisempaa, kun osavalmistus toteutetaan erillisillä toimittajilla. Tämän diplomityön tavoitteena on selvittää The Switch Drive Systems Oy:n tuotteiden kokoonpantavuuden parantamisen mahdollisuuksia sekä toimia yrityksen kokoonpantavuuteen liittyvien toimintamallien kehittämisen perustana. Diplomityöstä on olemassa myös julkinen versio. Työ alkaa kirjallisuuskatsauksella, jossa kuvataan kokoonpanoystävällisyyttä ja kokoonpanoystävällistä toimintaa kattaen suunnittelun, osien ja osakokoonpanojen valmistamisen verkostotuotannossa sekä kokoonpanotyön. Toimittajayhteistyötä ja laadunhallintaa käsitellään näiden lukujen yhteydessä. Työn käytännön osuudessa kartoitetaan The Switchin tuotteiden ja yrityksen toimintatapojen kokoonpanoystävällisyyden parantamismahdollisuuksia. Tämä toteutettiin The Switchin henkilöstön sekä osakokoonpanojen ja osien toimittajien haastatteluilla, toiminnan tarkkailulla sekä piirustuksiin ja prosessikuvauksiin perehtymällä. Kokoonpantavuuden ja valmistettavuuden systemaattinen huomioiminen on kannattavaa suunnittelun alusta alkaen. Tässä tulee mm. hyödyntää sekä toimittajien että The Switchin kokoonpanossa olevaa tietoa ja kokemusta.

Sampling in chemical analysis

The uncertainty of any analytical determination depends on analysis and sampling. Uncertainty arising from sampling is usually not controlled and methods for its evaluation are still little known. Pierre Gy’s sampling theory is currently the most complete theory about samplingwhich also takes the design of the sampling equipment into account. Guides dealing with the practical issues of sampling also exist, published by international organizations such as EURACHEM, IUPAC (International Union of Pure and Applied Chemistry) and ISO (International Organization for Standardization). In this work Gy’s sampling theory was applied to several cases, including the analysis of chromite concentration estimated on SEM (Scanning Electron Microscope) images and estimation of the total uncertainty of a drug dissolution procedure. The results clearly show that Gy’s sampling theory can be utilized in both of the above-mentioned cases and that the uncertainties achieved are reliable. Variographic experiments introduced in Gy’s sampling theory are beneficially applied in analyzing the uncertainty of auto-correlated data sets such as industrial process data and environmental discharges. The periodic behaviour of these kinds of processes can be observed by variographic analysis as well as with fast Fourier transformation and auto-correlation functions. With variographic analysis, the uncertainties are estimated as a function of the sampling interval. This is advantageous when environmental data or process data are analyzed as it can be easily estimated how the sampling interval is affecting the overall uncertainty. If the sampling frequency is too high, unnecessary resources will be used. On the other hand, if a frequency is too low, the uncertainty of the determination may be unacceptably high. Variographic methods can also be utilized to estimate the uncertainty of spectral data produced by modern instruments. Since spectral data are multivariate, methods such as Principal Component Analysis (PCA) are needed when the data are analyzed. Optimization of a sampling plan increases the reliability of the analytical process which might at the end have beneficial effects on the economics of chemical analysis,

Determinação simultânea de As, Cd e Pb em amostras de água purificada para hemodiálise por espectrometria de absorção atômica com forno de grafite, após otimização multivariada baseada no uso de planejamento experimental

This paper reports the development of a methodology for simultaneously determining As, Cd and Pb, employing GF AAS with polarized Zeeman-effect background correction. In order to make the procedure applicable, the influence of pyrolysis and atomization temperatures and the amount of chemical modifiers were studied. Factorial and central composite designs were used to optimize these variables. Precision and accuracy of the method were investigated using Natural Water Reference material, Nist SRM 1640. Results are in agreement with certified values at the 95% confidence limit when the Student t-test is used. This methodology was used for quality control of purified water for hemodialysis.

Elaboración e implantación de un sistema APPCC para industrias elaboradoras de creps

Debido a la coyuntura actual y a la liberalización del comercio de alimentos, es necesariogarantizar la seguridad e inocuidad de los alimentos, las cuales se conseguirán aplicando lasprácticas y las normas apropiadas en materia de seguridad alimentaria. Los reglamentoscomunitarios en materia de seguridad alimentaria, y en particular el Reglamento (CE) nº852/2004 relativo a la higiene de los alimentos, obligan a las empresas alimentarias a aplicarun sistema de autocontrol basado en los principios del Análisis de Peligros y Puntos Críticosde Control (APPCC). En España, la legislación nacional ya contemplaba este requisito. En elámbito de las comidas preparadas, esta exigencia se recogía expresamente en el Real Decreto3484/200, de 29 de diciembre, por el que se establecen las normas de higiene para laelaboración, distribución y comercio de comidas preparadas.En el presente Proyecto/Trabajo Final de Carrera (PTFC), se ha elaborado un manual, queconsta de ocho capítulos, unos anexos y una memoria descriptiva, que servirá de guía para eldiseño de un sistema de APPCC, siguiendo los procedimientos definidos en el CodexAlimentarius, que permita su aplicación a las industrias elaboradoras de creps y a la vezproporcione las pautas necesarias para su implantación. Debido a la imposibilidad de aplicarel sistema de APPCC desarrollado a una industria concreta, se ha elaborado un manualgenérico que cada industria deberá adaptar a sus sistema productivo

Cartilage Appearance Using an Environmental Scanning Electron Microscope.

Because of technical principles, samples to be observed with electron microscopy need to be fixed in a chemical process and exposed to vacuum conditions that can produce some changes in the morphology of the specimen. The aim of this work was to obtain high-resolution images of the fresh articular cartilage surface with an environmental scanning electron microscope (ESEM), which is an instrument that permits examination of biological specimens without fixation methods in a 10 Torr chamber pressure, thus minimizing the risk of creating artifacts in the structure. Samples from weight-bearing areas of femoral condyles of New Zealand white rabbits were collected and photographed using an ESEM. Images were analyzed using a categorization based in the Jurvelin classification system modified by Hong and Henderson. Appearance of the observed elevations and depressions as described in the classification were observed, but no fractures or splits of cartilage surface, thought to be artifacts, were detected. The ESEM is a useful tool to obtain images of fresh articular cartilage surface appearance without either employing fixation methods or exposing the specimen to extreme vacuum conditions, reducing the risk of introducing artifacts within the specimen. For all these reasons it could become a useful tool for quality control of the preservation process of osteochondral allografting in a bank of musculoskeletal tissues.

Desarrollo de un modelo SIMCA para la clasificación de kerosinas mediante el empleo de la espectroscopía infrarroja

In the petroleum refining industry, the use of crude from several origins is frequent. This leads to a product of variable chemical composition during refining, hindering quality control. Therefore, it is important to develop classification models that help to better characterize those products. The objective of this study is to develop a SIMCA recognition pattern to classify kerosene using infrared spectroscopy data. The model permits to differentiate two kerosene groups with different chemical compositions, which was corroborated by mass spectrometry.

Elementos-traço e sódio em suco de uva: aspectos nutricionais e toxicológicos

Eight trace elements were determined in 20 Brazilian brands of grape juice, distributed over the country. Highest measured concentrations (As: 0.016; Cd: 0.010; Cr: 0.060; Cu: 1.28; Ni: 0.032; Pb: 0.016; Sb: 0.0040 and Zn: 1.44 mg L-1) comply with Brazilian maximal tolerance levels for inorganic contaminants (As: 0.5; Cd: 0.5; Cr: 0.1; Cu: 30; Ni: 3; Pb: 0.4; Sb: 1 and Zn: 25 mg L-1). Determination of arsenic species has shown inorganic As(V) as predominant in most samples. Sodium concentrations, nowadays a major public health concern, were also measured, showing an average of 149 mg L-1. Analytical results for this element were much higher than label concentrations, showing the need for better quality control.

Estrategias en el desarrollo de métodos analíticos para la determinación simultánea de compuestos orgánicos por espectrofotometría derivada

In this work is proposed, a simple experiment for the simultaneous determination of losartan (L) and hydrochlorothiazide (H) in synthetic and real samples by derivative spectrophotometry technique. For the students it is relevant to know this technique for simultaneous determinations of drugs, allowing that the students recognize that this technique is simple, rapid and applicable to quality control. This experimental work, it is proposed in order to being applied to undergraduates into laboratories of analytical chemistry. Furthermore, it is given the integration of the theoretical knowledge with the experimental work; this correlation is of interest for the students.

Caracterização do mel produzido por espécies de Melipona Illiger, 1806 (apidae: meliponini) da região nordeste do Brasil: 1. Características físico-químicas

Thirty three honey samples produced by four Melipona species from different areas of the State of Bahia, were analyzed with the aim to determine their physico-chemical characteristics, contributing to the establishment of standards for quality control. The majority of the average values for physico-chemical parameters fulfilled the quality criteria established by the Brazilian and international Legislations for Apis honey, except for moisture content, which afforded higher values. Concerning the high number of samples wich did not fit the limits for reducing sugars, it is necessary to define minimum values in order to characterize Melipona honeys, as well as criteria for use of diastasic activity.

Parâmetros r e R obtidos de programa interlaboratorial: como usá-los

Intralaboratorial and interlaboratorial variabilities can be obtained by conducting an specially designed interlaboratory program. Using the analysis of variance technique one can calculate the r (repeatability) and R (reproducibility) indexes that can help participant laboratories to monitor their routine quality control procedures. An example is described using data obtained from an interlaboratory program where twelve laboratories determined total iron content in silicon metal sample by using flame atomic absorption spectrometry.

Development and validation of a GC-FID assay for determination of fluvastatin in pharmaceutical preparations

A gas chromatographic method has been developed for the assay of fluvastatin sodium (FLU). FLU was silylated with N,O-bis(trimethylsilyl)trifluoroacetamide-1% trimethylchlorosilane at 90 ºC for 30 min and analysed in a DB-1 column by capillary gas chromatograph with a flame ionization detector. The method was validated. The assay was linear over the concentration range at 10.0 to 50.0 µg mL-1. The limit of detection and the limit of quantitation were 1.0 and 3.0 µg mL-1, respectively. The recoveries of FLU derivatives were in the range of 99.25-99.80%. In inter-day and intra-day analysis, the values of relative standard deviation (%) and the relative mean error (%) were found between 0.20-0.80% and -0.20-0.75%, respectively. The developed method was succesfully applied to analyze the FLU content in tablet formulation. The results were statistically compared with those obtained by the official method, and no significant difference was found between the two methods. Therefore, it can be recommended for the quality control assay of FLU in pharmaceutical industry.

Validação de métodos cromatográficos de análise: um experimento de fácil aplicação utilizando cromatografia líquida de alta eficiência (CLAE) e os princípios da "Química Verde" na determinação de metilxantinas em bebidas

The validation of analytical methods is an important step in quality control. The main objective of this study is to propose an HPLC experiment to verify the parameters of validation of chromatographic methods, based on green chemistry principles, which can be used in experimental courses of chemistry and related areas.