Predictions of fish yields and the status of the Kainji Lake fishery, 1998

Length frequency data was collected for the 6 main species from the Kainji Lake fishery for up to 16 months. Growth parameters were estimated and used for virtual - population and length based cohort analysis. The results from cohort analysis suggest that before the ban on beach seines the maximum economic yield from the fishery was overshot by 70%. Yield per recruit analysis showed that the fish are caught far below their optimum size. Fishing gears and the timing responsible for this early mortality have been identified. After the eradication of seines from the lake a 10% increase in total catch revenue can be expected from the fishery. This is equivalent to an increase in income of Naira 18,300 per annum for each fishing entrepreneur using other methods. A scenario for the regulation of cast net mesh size together with the ban of beach seines has been presented. A further increase of Naira 142 million (N25,500 per entrepreneur) can be anticipated if this is implemented by the Kainji Lake Fisheries Management and Conservation Unit. It is expected that the annual increase in fishing effort presently experienced will cause future yields to decline. The rate of the decline has been reduced by the eradication of the beach seine fishery and will further fall if the minimum mesh size for cast nets is implemented. A recommendation is made to the Kainji Lake Fisheries Management and Conservation Unit to first consolidate the beach seine ban and then to implement a ban of undersized cast nets. (PDF contains 70 pages)

Fisheries statistical bulletin, Kainji Lake, Nigeria, 1999

A tabulated summary is presented of the main Lake Kainji fisheries data collected to date (1999) by the Nigerian-German Kainji Lake Fisheries Promotion Project, together with a current overview of the fishery. The data are given under the following sections: 1) Fishing localities and types; 2) Frame survey data; 3) Number of licensed fishermen by state; 4) Mesh size distribution; 5) Fishing net characteristics; 6) Fish yield; 7) Average monthly CPUE by gear type; 8)Average monthly fishing activity by gear type; 9) Total annual fishing effort by gear type; 10) Total annual value of fish landed by gear type; 11) Trends of the total yield by gear type. (PDF contains 34 pages)

Nuclear Hartree-Fock calculations on parallel computers

Hartree-Fock (HF) calculations have had remarkable success in describing large nuclei at high spin, temperature and deformation. To allow full range of possible deformations, the Skyrme HF equations can be discretized on a three-dimensional mesh. However, such calculations are currently limited by the computational resources provided by traditional supercomputers. To take advantage of recent developments in massively parallel computing technology, we have implemented the LLNL Skyrme-force static and rotational HF codes on Intel's DELTA and GAMMA systems at Caltech.

We decomposed the HF code by assigning a portion of the mesh to each node, with nearest neighbor meshes assigned to nodes connected by communication· channels. This kind of decomposition is well-suited for the DELTA and the GAMMA architecture because the only non-local operations are wave function orthogonalization and the boundary conditions of the Poisson equation for the Coulomb field.

Our first application of the HF code on parallel computers has been the study of identical superdeformed (SD) rotational bands in the Hg region. In the last ten years, many SD rotational bands have been found experimentally. One very surprising feature found in these SD rotational bands is that many pairs of bands in nuclei that differ by one or two mass units have nearly identical deexcitation gamma-ray energies. Our calculations of the five rotational bands in ^(192)Hg and ^(194)Pb show that the filling of specific orbitals can lead to bands with deexcitation gamma-ray energies differing by at most 2 keV in nuclei differing by two mass units and over a range of angular momenta comparable to that observed experimentally. Our calculations of SD rotational bands in the Dy region also show that twinning can be achieved by filling or emptying some specific orbitals.

The interpretation of future precise experiments on atomic parity nonconservation (PNC) in terms of parameters of the Standard Model could be hampered by uncertainties in the atomic and nuclear structure. As a further application of the massively parallel HF calculations, we calculated the proton and neutron densities of the Cesium isotopes from A = 125 to A = 139. Based on our good agreement with experimental charge radii, binding energies, and ground state spins, we conclude that the uncertainties in the ratios of weak charges are less than 10^(-3), comfortably smaller than the anticipated experimental error.

Ultrafast control of multiple filamentation by ultrafast laser pulses

Control of multiple filamentation by laser-induced microlens effect due to a nonlinear interaction of two overlapping laser beams inside a glass plate was demonstrated. Individual or multiple spots on the white light pattern which is a product of multiple filamentation through a mesh can be switched on and off with a very high contrast ratio on a femtosecond time scale. This phenomenon can find applications such as ultrafast optical switch and high-speed sampling. (C) 2005 American Institute of Physics.

Selection of efficient hanging ratios of gillnet on fish catch in Lake Kainji, as means of alleviating poverty among artisanal fishermen in Nigeria

Five experimental gillnet each measuring 50mx 3m nylon multi filament netting of 3" by210/2 mesh size were constructed using 40%, 45%, 50%, 55% and 60% hanging percentages, the report was carried out at Yunawa fishing village on the eastern bank of Lake Kainji. The nets were set over night (6 hours approximately). Between April-July 2004, the fish caught by the five nets were recorded taking into consideration the three mode of capture i.e. enmeshing entanglement and wedging Weight number and percentage mean weight and number based on species at five different hanging ratios were analyzed in general 50% hanging ratio was found to be the best followed by 40% among others. There was significant difference (P<0.05) in the mode of capture for both hanging ratios. Most of the fish were caught by entanglement i.e. about 83% of the catch was by entanglement while 505 hanging ratio was the best considered after the report. The occurrence of species of the five hanging ratios has significant difference (P<0.05) in terms of catch by weight and number

Conformal geometry processing

This thesis introduces fundamental equations and numerical methods for manipulating surfaces in three dimensions via conformal transformations. Conformal transformations are valuable in applications because they naturally preserve the integrity of geometric data. To date, however, there has been no clearly stated and consistent theory of conformal transformations that can be used to develop general-purpose geometry processing algorithms: previous methods for computing conformal maps have been restricted to the flat two-dimensional plane, or other spaces of constant curvature. In contrast, our formulation can be used to produce---for the first time---general surface deformations that are perfectly conformal in the limit of refinement. It is for this reason that we commandeer the title Conformal Geometry Processing.

The main contribution of this thesis is analysis and discretization of a certain time-independent Dirac equation, which plays a central role in our theory. Given an immersed surface, we wish to construct new immersions that (i) induce a conformally equivalent metric and (ii) exhibit a prescribed change in extrinsic curvature. Curvature determines the potential in the Dirac equation; the solution of this equation determines the geometry of the new surface. We derive the precise conditions under which curvature is allowed to evolve, and develop efficient numerical algorithms for solving the Dirac equation on triangulated surfaces.

From a practical perspective, this theory has a variety of benefits: conformal maps are desirable in geometry processing because they do not exhibit shear, and therefore preserve textures as well as the quality of the mesh itself. Our discretization yields a sparse linear system that is simple to build and can be used to efficiently edit surfaces by manipulating curvature and boundary data, as demonstrated via several mesh processing applications. We also present a formulation of Willmore flow for triangulated surfaces that permits extraordinarily large time steps and apply this algorithm to surface fairing, geometric modeling, and construction of constant mean curvature (CMC) surfaces.

Interplay of martensitic phase transformation and plastic slip in polycrystals

Inspired by key experimental and analytical results regarding Shape Memory Alloys (SMAs), we propose a modelling framework to explore the interplay between martensitic phase transformations and plastic slip in polycrystalline materials, with an eye towards computational efficiency. The resulting framework uses a convexified potential for the internal energy density to capture the stored energy associated with transformation at the meso-scale, and introduces kinetic potentials to govern the evolution of transformation and plastic slip. The framework is novel in the way it treats plasticity on par with transformation.

We implement the framework in the setting of anti-plane shear, using a staggered implicit/explict update: we first use a Fast-Fourier Transform (FFT) solver based on an Augmented Lagrangian formulation to implicitly solve for the full-field displacements of a simulated polycrystal, then explicitly update the volume fraction of martensite and plastic slip using their respective stick-slip type kinetic laws. We observe that, even in this simple setting with an idealized material comprising four martensitic variants and four slip systems, the model recovers a rich variety of SMA type behaviors. We use this model to gain insight into the isothermal behavior of stress-stabilized martensite, looking at the effects of the relative plastic yield strength, the memory of deformation history under non-proportional loading, and several others.

We extend the framework to the generalized 3-D setting, for which the convexified potential is a lower bound on the actual internal energy, and show that the fully implicit discrete time formulation of the framework is governed by a variational principle for mechanical equilibrium. We further propose an extension of the method to finite deformations via an exponential mapping. We implement the generalized framework using an existing Optimal Transport Mesh-free (OTM) solver. We then model the $\alpha$--$\gamma$ and $\alpha$--$\varepsilon$ transformations in pure iron, with an initial attempt in the latter to account for twinning in the parent phase. We demonstrate the scalability of the framework to large scale computing by simulating Taylor impact experiments, observing nearly linear (ideal) speed-up through 256 MPI tasks. Finally, we present preliminary results of a simulated Split-Hopkinson Pressure Bar (SHPB) experiment using the $\alpha$--$\varepsilon$ model.

Assessment of inland waters fisheries in Nigeria with implications for improved freshwater fish production, poverty alleviation and food security

Rapid Appraisals of the current fisheries situations of some selected inland water bodies in Nigeria were carried out within the framework of Aquaculture and Inland Fisheries Project (AIFP) Annex II of the National Special Programme for Food Security (NSPFS). This paper presents the results of the fishery assessment of one of the selected inland water bodies (Sabke Lake) in Nigeria with a view to optimizing the fish yield through the adoption of improved culture based fishery techniques and community-based fisheries management. The lake is unmanaged and the fishing pressure was found to be very high. Also a number of fishermen were found using small mesh size nets to crop the juveniles of highly valued fish species for an optimum catch. About 14 fishermen ought to have been engaged in full time fishing activities if the fisheries of this lake is to be managed on a sustainable basis. However, a surplus of over 100 fishermen was recorded actively fishing during the period of the study. The results further revealed that Fisheries Rules and Regulations were not established for the national exploitation and proper management of the fisheries of many inland water bodies including Sabke Lake. All these have a depilatory effect on the abundance and sizes of fish harvested from the nigerian inland water bodies especially Sabke Lake. A community based management system that establishes a participatory involvement of fishermen in the conservation and national exploitation of fisheries resources for their own well being is recommended for Sabke Lake and other inland water bodies in Nigeria

Evaluation of a new fishing pot trap (Lege) in River Rima, north western Nigeria

Based on the findings and diagnostic survey, a new fishing trap, christened Lege trap was designed and fabricated, and the performance evaluated. The 8-valve Lege trap was assessed concurrently with Malian and Ndurutu traps by the fishermen in the study area. The experiment was conducted in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity number, biomass and size were subjected to descriptive statistics and analysis of variance. The results showed that 22 fish species belonging to thirteen families were caught. The prototype (Lege) trap recorded higher species diversity index (0.90) than the Malian (0.50) and Ndurutu (0.50) traps. The Lege trap also accounted for the largest number (55%) and biomass (63%) of fish caught which was significantly (P<0.05) higher than those of the Malian and Nduutu traps were. The mean length (15.03~c5.70cm), weight (60.43~c48.61g) and girth (4.77~c1.65cm) of fishes caught in the Lege trap were also significantly (P0.05) higher than those caught in the other two traps. These results demonstrated better performance of the new trap than the two conventional traps, even though the sizes of some of the fish species caught in all the traps were below those allowed by the Sokoto State Fisheries Edict where the study was conducted. Therefore, since it is desirable to develop conservation-oriented trap at a least cost, it is necessary to research further on the number of valves and mesh size of the new trap

Influence of number of valves on catch composition of a fishing pot trap (Lege) in River Rima, north western Nigeria

Three types of prototype (Lege) traps with different numbers of entrance valves were evaluated in River Rima, north western Nigeria. The traps contained 4,6 and 8 valves, tagged 4-V, 6-V and 8-V respectively. The experiment was carried out in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity, number biomass and sizes were subjected to descriptive statistics and analysis of variance. The results of the catch composition showed close diversity index of 0.86 for 6-V, 0.80 for 8-V and 0.60 for 4-V Lege traps. However, the number (41%) and biomass 48%) of fish caught in the 6-V Lege trap were significantly (P0.05) higher than those caught in the other traps. There was no definite trend in the sizes (length and girth) of fish caught in the traps. On the basis of species diversity, and the number and biomass of fish caught, the 6-V Lege showed preference for adoption than the other two traps. However, further studies are recommended on the appropriate mesh size net for the trap in line with the provisions of fisheries edicts

Impact assessment of Niger State fisheries legislation on fisheries conservation in Edozhigi local government area (L.G.A.) of Niger State

A preliminary survey was conducted among the fishermen in five selected villages in Edozhigi L.G.A. of Niger State. One hundred and fifty fishermen were randomly selected and interviewed to find out the impact of Niger State fisheries legislation on fisheries conservation resources in the area. The analysis of data collected using descriptive statistics indicated that undersized mesh of gill nets, beach seines and traps are being used unabated. Also, fenced barriers across the entrance of flood plain ponds and Ex-bow lakes from the main stream are in the area. The fisheries rules and regulations implementers are rarely seen or not seen at all in the area. The decreasing nature of fish catches was detected. It is observed that government policy on fish conversation is neglected due to inadequate or lack of funding for meaningful extension and implementation of the fisheries rules and regulations

Study on the effects of three fishing baits on the catch composition of malian traps in Lake Kainji

The studies on the effects of three fishing baits on the catch composition of Malian traps in Lake Kainji were investigated. The traps were set between Monai and Taafa fishing villages in the Southern basin of the lake, baited with their respective treatment and were inspected daily for twelve days. A total of 218 fish were caught, of which the highest (54.59%) was caught by corn bran, while the lowest (11.01%) was caught by stomach content and rice bran caught 34.4%. The fish caught comprised of 15 species belonging to 8 families. There was no significant different (P>0.05) in the catch of the various baits. The weight also followed the same trend as the number of fish caught. However, both baits showed better efficiency for Alestes baremose. Tilapia zilli, S. galilaeus, Oreochromis niloticus, Labeo coubie and Distichodus rostratus than other species caught. There was a wide range between the inimum and maximum size of species caught, which showed the efficiency of the traps in capturing small size, juveniles and the adult of large fish species due to small mesh size (1") net-cover of the trap. Recommendations were made on the use of corn and rice bran as baits enhancing catch efficiency for fishes such as O.niloticus, T. zilli, T. galilaeus and D. rostratus

Responsible fisheries enhancing poverty alleviation of fishing communities of Lake Kainji

The attributes of responsible fisheries in enhancing Poverty Alleviation of fishing Communities of Lake Kainji were appraised. After impoundment in 1968, the catch per unit effort of fish continued on a downward trend, which suggested a decline in the fish population as a result of improper fishing methods such as the use of small mesh size nets, fish poisoning, destructive fishing gears like beach seine nets. The Nigerian-German (GTZ) Kainji Lake Fisheries Promotion Project intervention brought an increase in yields for the lake in 1996. The estimated annual yield was put at 38.244 metric tones in 1996, an increase of 18 % from the yield recorded in 1995 due to improvement in fishing and conservation methods. The result of catch assessment study carried out in 2003 as a follow up to GTZ intervention is presented. This reveals 15 family and 40 species of fish recorded. Which shows that Lake Kainji still has very high diversity and abundance of fish species. The paper suggests ways to encourage fishing communities to adopt new innovation or strategies by the government and non-governmental organization, which will go a long way in alleviation poverty among the fisher folks

Influence of number of valves on catch composition of a fishing pot trap (Lege) in River Rima, north western Nigeria

Three types of prototype (Lege) traps with different numbers of entrance valves were evaluated in River Rima, north western Nigeria. The traps contained 4,6 and 8 valves, tagged 4-V, 6-V and 8-V respectively. The experiment was carried out in a randomized complete block design with one factor each replicated three times. Data collected on fish diversity, number, biomass and sizes were subjected to descriptive statistics and analysis of variance. The results of the catch composition showed close diversity index of 0.86 for 6-V, 0.80 for 8-V and 0.60 for 4-V Lege traps. However, the number (41%) and biomass (48%) of fish caught in the 6-V Lege trap were significantly (P<0.05) higher than those caught in the other traps. There was no definite trend in the sizes (length and girth) of fish caught in the traps. On the basis of species diversity, and the number and biomass of fish caught, the 6-V Lege showed preference for adoption than the other two traps. However, further studies are recommended on the appropriate mesh size net for the trap in line with the provisions of fisheries edicts

Neue Chance für Scholle und Kabeljau in der Nordsee

Two surveys in the German Bight revealed a relatively good recruitment for plaice and cod. However, with the current high effort and uneconomic way of fishing, most of these fish will end as discards. To protect young plaice during the winter months an increase of the mesh opening in beam trawls within the plaice box is suggested. Therefore, the fishermen are called upon to make a more considerated selection of their nets.