Nutrition, management and other environmental influences on the quality and production of mohair and cashmere with particular reference to mediterranean and annual temperate climatic zones : a review

Goat fibre production is affected by genetic and environmental influences. Environmental influences which are the subject of this review include bio–geophysical factors (photoperiod, climate–herbage system and soil–plant trace nutrient composition), nutrition factors and management factors. Nutrition and management influences discussed include rate of stocking, supplementary feeding of energy and protein, liveweight change, parturition and management during shearing. While experimental data suggest affects of seasonal photoperiod on the growth of mohair and cashmere are large, these results may have confounded changes in temperature with photoperiod. The nutritional variation within and among years is the most important climatic factor influencing mohair and cashmere production and quality. Mohair quality and growth is affected significantly by rate of stocking and during periods of liveweight loss by supplementary feeding of either energy or protein. Strategic use of supplements, methods for rapid introduction of cereal grains, influence of dietary roughage on intake and the economics of supplementary feeding are discussed. Cashmere production of young, low producing goats does not appear to be affected by energy supplementation, but large responses to energy supplementation have been measured in more productive cashmere goat strains. The designs of these cashmere nutrition experiments are reviewed. Evidence for the hypothesis that energy-deprived cashmere goats divert nutrients preferentially to cashmere growth is reviewed. The influence and potential use of liveweight manipulation in affecting mohair and cashmere production and quality are described. Estimates of the energy requirements for the maintenance of fibre goats and the effect of pregnancy and lactation on mohair and cashmere growth are summarised. The effects and importance of management and hygiene during fibre harvesting (shearing) in producing quality fibre is emphasised. The review concludes that it is important to assess the results of scientific experiments for the total environmental content within which they were conducted. The review supports the view that scientific experiments should use control treatments appropriate to the environment under study as well as having controls relevant for other environments. In mediterranean and annual temperate environments, appropriate controls are liveweight loss and liveweight maintenance treatments. Mohair producers must graze goats at moderate rates of stocking to maximise animal welfare, but in so doing, they will produce heavier goats and coarser mohair. In mediterranean and annual temperate environments, seasonal changes in liveweight are large and influence both quality and production of mohair and cashmere. Mohair and cashmere producers can manipulate liveweight by supplementary feeding energy during dry seasons to minimise liveweight loss, but the economics of such feeding needs to be carefully examined. Strategic benefits can be obtained by enhancing the growth of young does prior to mating and for higher producing cashmere goats.

Scalable production of wrinkled and few-layered graphene sheets and their use for oil and organic solvent absorption

High-quality wrinkled and few-layered graphene sheets have been produced via a mechano-thermal exfoliation process for a simple, effective and low-cost mass production. Graphene sheets were produced by first ball milling of graphite with ammonium chloride followed by thermal annealing at 800 °C in nitrogen gas. The few layered graphene sheets show highly efficient selectivity and capacity for the absorption of petroleum products as well as organic solvents such as ethanol, cyclohexane and chloroform (up to 82, 42 and 98 times of their own weight, respectively). The saturated few-layered graphene sheets can be cleaned for reuse by simply burning in air. The low-cost strategy for mass production and easy recycling routes demonstrate the great potential of few-layered graphene sheets for oil removal.

Comparison of milling and solution approach for production of silk particles

Silk particles were produced by regenerating from silk solution, and using a milling method. In the regenerated silk particle production, two methods which are reported to render submicron silk particles were selected. Their particle sizes and structures were compared with particles of milling method already developed by us. The volume median average particle sizes (d(0.5)) of regenerated particles were much higher than what was reported previously. In contrast, milling method could produce particles with adjustable particle sizes ranging from micron to submicron level. All the milled particles had advantage of at least 15. °C higher thermal decomposition temperature than regenerated particles. They had silk II structure, and the crystallinity reduced as particle fineness increased, but remained higher than regenerated particles of similar sizes. © 2014 Elsevier B.V.

Large-scale production of h-In2O3/carbon nanocomposites with enhanced lithium storage properties

h-In2O3/carbon nanocomposites were obtained via a facile ball milling process from a mixture of h-In2O3 nanoparticles and Super P carbon. Compared to pure h-In2O3 nanoparticles, the nanocomposites exhibited an initial discharge capacity of 1360 mAh g-1, a stable reversible capacity of 867 mAh g-1 after 100 cycles as well as a high coulombic efficiency of 99%. The superior lithium-ion battery performance can be attributed to the specific structure of h-In2O3 and the uniform and continuous nano-carbon coating layers. The nano-carbon coating could protect the inner active materials from fragmentation and increase the electronic conductivity. This study not only provides a promising electrode material for high-performance lithium-ion batteries, but also further demonstrates a straightforward, effective and environmental friendly process for synthesizing nanocomposites. © 2014 Elsevier Ltd.

High-efficient production of boron nitride nanosheets via an optimized ball milling process for lubrication in oil

Although tailored wet ball milling can be an efficient method to produce a large quantity of two-dimensional nanomaterials, such as boron nitride (BN) nanosheets, milling parameters including milling speed, ball-to-powder ratio, milling ball size and milling agent, are important for optimization of exfoliation efficiency and production yield. In this report, we systematically investigate the effects of different milling parameters on the production of BN nanosheets with benzyl benzoate being used as the milling agent. It is found that small balls of 0.1-0.2 mm in diameter are much more effective in exfoliating BN particles to BN nanosheets. Under the optimum condition, the production yield can be as high as 13.8% and the BN nanosheets are 0.5-1.5 μm in diameter and a few nanometers thick and of relative high crystallinity and chemical purity. The lubrication properties of the BN nanosheets in base oil have also been studied. The tribological tests show that the BN nanosheets can greatly reduce the friction coefficient and wear scar diameter of the base oil.

A glycosyl hydrolase family 16 gene is responsible for the endogenous production of β-1,3-glucanases within decapod crustaceans

To identify the gene responsible for the production of a β-1,3-glucanase (laminarinase) within crustacea, a glycosyl hydrolase family 16 (GHF16) gene was sequenced from the midgut glands of the gecarcinid land crab, Gecarcoidea natalis and the freshwater crayfish, Cherax destructor. An open reading frame of 1098bp for G. natalis and 1095bp for C. destructor was sequenced from cDNA. For G. natalis and C. destructor respectively, this encoded putative proteins of 365 and 364 amino acids with molecular masses of 41.4 and 41.5kDa. mRNA for an identical GHF16 protein was also expressed in the haemolymph of C. destructor. These putative proteins contained binding and catalytic domains that are characteristic of a β-1,3-glucanase from glycosyl hydrolase family 16. The amino acid sequences of two short 8-9 amino acid residue peptides from a previously purified β-1,3-glucanase from G. natalis matched exactly that of the putative protein sequence. This plus the molecular masses of the putative proteins matching that of the purified proteins strongly suggests that the sequences obtained encode for a catalytically active β-1,3-glucanase. A glycosyl hydrolase family 16 cDNA was also partially sequenced from the midgut glands of other amphibious (Mictyrisplatycheles and Paragrapsus laevis) and terrestrial decapod species (Coenobita rugosus, Coenobita perlatus, Coenobita brevimanus and Birgus latro) to confirm that the gene is widely expressed within this group. There are three possible hypothesised functions and thus evolutionary routes for the β-1,3-glucanase: 1) a digestive enzyme which hydrolyses β-1,3-glucans, 2) an enzyme which cleaves β-1,3-glycosidic bonds within cell walls to release cell contents or 3) an immune protein which can hydrolyse the cell walls of potentially pathogenic micro-organisms.

Institutional processes and the production of gender inequalities: the case of Australian child support research and administration

This article analyses the administrative and research capture of child support data as a case study of how institutional data collection processes are performative in perpetuating gendered inequalities. We compare interviews with 19 low-income single mothers and their longitudinal survey responses from the same research to reveal how low-income women strategically or inadvertently ‘smoothed’ their experiences when responding to data collection processes. This directly resulted in material and symbolic costs in the form of reduced welfare benefits and limited evidence with which to lobby for policy reform. These processes in turn provided benefits to fathers and the state in the form of reduced child support liabilities and enforcement action, and welfare outlays, respectively. We conclude that current administrative and research data collection practices provide a limited and gendered evidence base for administrative justice and policy reform.

Efficient and selectable production of reactive species using a nanosecond pulsed discharge in gas bubbles in liquid

A plasma gas bubble-in-liquid method for high production of selectable reactive species using a nanosecond pulse generator has been developed. The gas of choice is fed through a hollow needle in a point-to-plate bubble discharge, enabling improved selection of reactive species. The increased interface reactions, between the gas-plasma and water through bubbles, give higher productivity. H2O2 was the predominant species produced using Ar plasma, while predominantly NO3- and NO2 were generated using air plasma, in good agreement with the observed emission spectra. This method has nearly 100% selectivity for H2O2, with seven times higher production, and 92% selectivity for NO3-, with nearly twice the production, compared with a plasma above the water.

Factors affecting the technical efficiency of production of the Brazilian banking system : a comparison of four statistical models in the context of data envelopment analysis

This paper uses an output oriented Data Envelopment Analysis (DEA) measure of technical efficiency to assess the technical efficiencies of the Brazilian banking system. Four approaches to estimation are compared in order to assess the significance of factors affecting inefficiency. These are nonparametric Analysis of Covariance, maximum likelihood using a family of exponential distributions, maximum likelihood using a family of truncated normal distributions, and the normal Tobit model. The sole focus of the paper is on a combined measure of output and the data analyzed refers to the year 2001. The factors of interest in the analysis and likely to affect efficiency are bank nature (multiple and commercial), bank type (credit, business, bursary and retail), bank size (large, medium, small and micro), bank control (private and public), bank origin (domestic and foreign), and non-performing loans. The latter is a measure of bank risk. All quantitative variables, including non-performing loans, are measured on a per employee basis. The best fits to the data are provided by the exponential family and the nonparametric Analysis of Covariance. The significance of a factor however varies according to the model fit although it can be said that there is some agreements between the best models. A highly significant association in all models fitted is observed only for nonperforming loans. The nonparametric Analysis of Covariance is more consistent with the inefficiency median responses observed for the qualitative factors. The findings of the analysis reinforce the significant association of the level of bank inefficiency, measured by DEA residuals, with the risk of bank failure.

The co-catalytic effect of chlorpromazine on peroxidase-mediated oxidation of melatonin: enhanced production of N-1-acetyl-N (2)-formyl-5-methoxykynuramine

Accumulating evidence points to relationships between increased production of reactive oxygen or decreased antioxidant protection in schizophrenic patients. Chlorpromazine (CPZ), which remains a benchmark treatment for people with schizophrenia, has been described as a pro-oxidant compound. Because the antioxidant compound melatonin exerts protective effects against CPZ-induced liver disease in rats, in this investigation, our main objective was to study the effect of CPZ as a co-catalyst of peroxidase-mediated oxidation of melatonin. We found that melatonin was an excellent reductor agent of preformed CPZ cation radical (CPZ(center dot+)). The addition of CPZ during the horseradish peroxidase (HRP)-catalyzed oxidation of melatonin provoked a significant increase in the rate of oxidation and production of N-1-acetyl-N-2-formyl-5-methoxykynuramine (AFMK). Similar results were obtained using myeloperoxidase. The effect of CPZ on melatonin oxidation was rather higher at alkaline pH. At pH 9.0, the efficiency of oxidation of melatonin was 15 times higher and the production of AFMK was 30 times higher as compared with the assays in the absence of CPZ. We suggest that CPZ is able to exacerbate the rate of oxidation of melatonin by an electron transfer mechanism where CPZ(center dot+), generated during the peroxidase-catalyzed oxidation, is able to efficiently oxidize melatonin.

Thermal and mechanical shocks affecting the first flush of production of Lentinula edodes on Eucalyptus saligna logs

O objetivo deste trabalho foi avaliar o efeito do choque térmico e mecânico na produtividade de Lentinula edodes em 140 toras de Eucalyptus saligna, completamente colonizadas pelo fungo, em diferentes tempos de imersão em água e no primeiro fluxo de produção. As toras foram imersas em água resfriada (16ºC) ou à temperatura ambiente (22ºC); os períodos de imersão corresponderam a 6, 10, 14, 18, 22, 26 e 38 horas; o choque mecânico foi acompanhado por três quedas consecutivas da tora, em posição vertical, no chão. A temperatura da água e o tempo de imersão afetaram a produção de L. edodes, resultando em aumentos significativos (2 a 4 vezes) nos tratamentos em que as toras foram submetidas à água resfriada e nos tempos de imersão mais curtos (6 e 10 horas). O choque mecânico não resultou em aumento na produção de basidiomas.