Biases in approximating log production

Most empirical work in economic growth assumes either a Cobb–Douglas production function expressed in logs or a log-approximated constant elasticity of substitution specification. Estimates from each are likely biased due to logging the model and the latter can also suffer from approximation bias. We illustrate this with a successful replication of Masanjala and Papagerogiou (The Solow model with CES technology: nonlinearities and parameter heterogeneity, Journal of Applied Econometrics 2004; 19: 171–201) and then estimate both models in levels to avoid these biases. Our estimation in levels gives results in line with conventional wisdom.

Optimal input/output reduction in production processes

While conventional Data Envelopment Analysis (DEA) models set targets for each operational unit, this paper considers the problem of input/output reduction in a centralized decision making environment. The purpose of this paper is to develop an approach to input/output reduction problem that typically occurs in organizations with a centralized decision-making environment. This paper shows that DEA can make an important contribution to this problem and discusses how DEA-based model can be used to determine an optimal input/output reduction plan. An application in banking sector with limitation in IT investment shows the usefulness of the proposed method.

Effects of syllable structure in aphasic errors:implications for a new model of speech production

Current models of word production assume that words are stored as linear sequences of phonemes which are structured into syllables only at the moment of production. This is because syllable structure is always recoverable from the sequence of phonemes. In contrast, we present theoretical and empirical evidence that syllable structure is lexically represented. Storing syllable structure would have the advantage of making representations more stable and resistant to damage. On the other hand, re-syllabifications affect only a minimal part of phonological representations and occur only in some languages and depending on speech register. Evidence for these claims comes from analyses of aphasic errors which not only respect phonotactic constraints, but also avoid transformations which move the syllabic structure of the word further away from the original structure, even when equating for segmental complexity. This is true across tasks, types of errors, and, crucially, types of patients. The same syllabic effects are shown by apraxic patients and by phonological patients who have more central difficulties in retrieving phonological representations. If syllable structure was only computed after phoneme retrieval, it would have no way to influence the errors of phonological patients. Our results have implications for psycholinguistic and computational models of language as well as for clinical and educational practices.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

A techno-economic comparison of power production by biomass fast pyrolysis with gasification and combustion

This paper presents an assessment of the technical and economic performance of thermal processes to generate electricity from a wood chip feedstock by combustion, gasification and fast pyrolysis. The scope of the work begins with the delivery of a wood chip feedstock at a conversion plant and ends with the supply of electricity to the grid, incorporating wood chip preparation, thermal conversion, and electricity generation in dual fuel diesel engines. Net generating capacities of 1–20 MWe are evaluated. The techno-economic assessment is achieved through the development of a suite of models that are combined to give cost and performance data for the integrated system. The models include feed pretreatment, combustion, atmospheric and pressure gasification, fast pyrolysis with pyrolysis liquid storage and transport (an optional step in de-coupled systems) and diesel engine or turbine power generation. The models calculate system efficiencies, capital costs and production costs. An identical methodology is applied in the development of all the models so that all of the results are directly comparable. The electricity production costs have been calculated for 10th plant systems, indicating the costs that are achievable in the medium term after the high initial costs associated with novel technologies have reduced. The costs converge at the larger scale with the mean electricity price paid in the EU by a large consumer, and there is therefore potential for fast pyrolysis and diesel engine systems to sell electricity directly to large consumers or for on-site generation. However, competition will be fierce at all capacities since electricity production costs vary only slightly between the four biomass to electricity systems that are evaluated. Systems de-coupling is one way that the fast pyrolysis and diesel engine system can distinguish itself from the other conversion technologies. Evaluations in this work show that situations requiring several remote generators are much better served by a large fast pyrolysis plant that supplies fuel to de-coupled diesel engines than by constructing an entire close-coupled system at each generating site. Another advantage of de-coupling is that the fast pyrolysis conversion step and the diesel engine generation step can operate independently, with intermediate storage of the fast pyrolysis liquid fuel, increasing overall reliability. Peak load or seasonal power requirements would also benefit from de-coupling since a small fast pyrolysis plant could operate continuously to produce fuel that is stored for use in the engine on demand. Current electricity production costs for a fast pyrolysis and diesel engine system are 0.091/kWh at 1 MWe when learning effects are included. These systems are handicapped by the typical characteristics of a novel technology: high capital cost, high labour, and low reliability. As such the more established combustion and steam cycle produces lower cost electricity under current conditions. The fast pyrolysis and diesel engine system is a low capital cost option but it also suffers from relatively low system efficiency particularly at high capacities. This low efficiency is the result of a low conversion efficiency of feed energy into the pyrolysis liquid, because of the energy in the char by-product. A sensitivity analysis has highlighted the high impact on electricity production costs of the fast pyrolysis liquids yield. The liquids yield should be set realistically during design, and it should be maintained in practice by careful attention to plant operation and feed quality. Another problem is the high power consumption during feedstock grinding. Efficiencies may be enhanced in ablative fast pyrolysis which can tolerate a chipped feedstock. This has yet to be demonstrated at commercial scale. In summary, the fast pyrolysis and diesel engine system has great potential to generate electricity at a profit in the long term, and at a lower cost than any other biomass to electricity system at small scale. This future viability can only be achieved through the construction of early plant that could, in the short term, be more expensive than the combustion alternative. Profitability in the short term can best be achieved by exploiting niches in the market place and specific features of fast pyrolysis. These include: •countries or regions with fiscal incentives for renewable energy such as premium electricity prices or capital grants; •locations with high electricity prices so that electricity can be sold direct to large consumers or generated on-site by companies who wish to reduce their consumption from the grid; •waste disposal opportunities where feedstocks can attract a gate fee rather than incur a cost; •the ability to store fast pyrolysis liquids as a buffer against shutdowns or as a fuel for peak-load generating plant; •de-coupling opportunities where a large, single pyrolysis plant supplies fuel to several small and remote generators; •small-scale combined heat and power opportunities; •sales of the excess char, although a market has yet to be established for this by-product; and •potential co-production of speciality chemicals and fuel for power generation in fast pyrolysis systems.

Developing accurate models of the human airways

Objectives Particle delivery to the airways is an attractive prospect for many potential therapeutics, including vaccines. Developing strategies for inhalation of particles provides a targeted, controlled and non-invasive delivery route but, as with all novel therapeutics, in vitro and in vivo testing are needed prior to clinical use. Whilst advanced vaccine testing demands the use of animal models to address safety issues, the production of robust in vitro cellular models would take account of the ethical framework known as the 3Rs (Replacement, Reduction and Refinement of animal use), by permitting initial screening of potential candidates prior to animal use. There is thus a need for relevant, realistic in vitro models of the human airways. Key findings Our laboratory has designed and characterised a multi-cellular model of human airways that takes account of the conditions in the airways and recapitulates many salient features, including the epithelial barrier and mucus secretion. Summary Our human pulmonary models recreate many of the obstacles to successful pulmonary delivery of particles and therefore represent a valid test platform for screening compounds and delivery systems.

Multi-level genetic algorithm for the resource-constrained re-entrant scheduling problem in the flow shop

The re-entrant flow shop scheduling problem (RFSP) is regarded as a NP-hard problem and attracted the attention of both researchers and industry. Current approach attempts to minimize the makespan of RFSP without considering the interdependency between the resource constraints and the re-entrant probability. This paper proposed Multi-level genetic algorithm (GA) by including the co-related re-entrant possibility and production mode in multi-level chromosome encoding. Repair operator is incorporated in the Multi-level genetic algorithm so as to revise the infeasible solution by resolving the resource conflict. With the objective of minimizing the makespan, Multi-level genetic algorithm (GA) is proposed and ANOVA is used to fine tune the parameter setting of GA. The experiment shows that the proposed approach is more effective to find the near-optimal schedule than the simulated annealing algorithm for both small-size problem and large-size problem. © 2013 Published by Elsevier Ltd.

Stability of the Inventory-Backorder Process in the (R; S) Inventory/Production Model

2000 Mathematics Subject Classification: 60G52, 90B30.

Non-stationary stochastic inventory lot-sizing with emission and service level constraints in a carbon cap-and-trade system

Firms worldwide are taking major initiatives to reduce the carbon footprint of their supply chains in response to the growing governmental and consumer pressures. In real life, these supply chains face stochastic and non-stationary demand but most of the studies on inventory lot-sizing problem with emission concerns consider deterministic demand. In this paper, we study the inventory lot-sizing problem under non-stationary stochastic demand condition with emission and cycle service level constraints considering carbon cap-and-trade regulatory mechanism. Using a mixed integer linear programming model, this paper aims to investigate the effects of emission parameters, product- and system-related features on the supply chain performance through extensive computational experiments to cover general type business settings and not a specific scenario. Results show that cycle service level and demand coefficient of variation have significant impacts on total cost and emission irrespective of level of demand variability while the impact of product's demand pattern is significant only at lower level of demand variability. Finally, results also show that increasing value of carbon price reduces total cost, total emission and total inventory and the scope of emission reduction by increasing carbon price is greater at higher levels of cycle service level and demand coefficient of variation. The analysis of results helps supply chain managers to take right decision in different demand and service level situations.

Analysis of purchasing activity with discounted cash flow inventory models = Beszerzési tevékenység elemzése diszkontált pénzáramlású készletmodellel

A klasszikus tételnagyság probléma két fontosabb készletezési költséget ragad meg: rendelési és készlettartási költségek. Ebben a dolgozatban a vállalatok készpénz áramlásának a beszerzési tevékenységre gyakorolt hatását vizsgáljuk. Ebben az elemzésben a készpénzáramlási egyenlőséget használjuk, amely nagyban emlékeztet a készletegyenletekre. Eljárásunkban a beszerzési és rendelési folyamatot diszkontálva vizsgáljuk. A költségfüggvény lineáris készpénztartási, a pénzkiadás haszonlehetőség és lineáris kamatköltségből áll. Bemutatjuk a vizsgált modell optimális megoldását. Az optimális megoldást egy számpéldával illusztráljuk. = The classical economic order quantity model has two types of costs: ordering and inventory holding costs. In this paper we try to investigate the effect of purchasing activity on cash flow of a firm. In the examinations we use a cash flow identity similar to that of in inventory modeling. In our approach we analyze the purchasing and ordering process with discounted costs. The cost function of the model consists of linear cash holding, linear opportunity cost of spending cash, and linear interest costs. We show the optimal solution of the proposed model. The optimal solutions will be presented by numerical examples.

Műszaki és gazdasági hatékonyság Koopmans termeléselméletében (Technical and economic efficiency in Koopmans' theory of production)

Koopmans gyakorlati problémák megoldása során szerzett tapasztalatait általánosítva fogott hozzá a lineáris tevékenységelemzési modell kidolgozásához. Meglepődve tapasztalta, hogy a korabeli közgazdaságtan nem rendelkezett egységes, kellően egzakt termeléselmélettel és fogalomrendszerrel. Úttörő dolgozatában ezért - mintegy a lineáris tevékenységelemzési modell elméleti kereteként - lerakta a technológiai halmazok fogalmán nyugvó axiomatikus termeléselmélet alapjait is. Nevéhez fűződik a termelési hatékonyság és a hatékonysági árak fogalmának egzakt definíciója, s az egymást kölcsönösen feltételező viszonyuk igazolása a lineáris tevékenységelemzési modell keretében. A hatékonyság manapság használatos, pusztán műszaki szempontból értelmezett definícióját Koopmans csak sajátos esetként tárgyalta, célja a gazdasági hatékonyság fogalmának a bevezetése és elemzése volt. Dolgozatunkban a lineáris programozás dualitási tételei segítségével rekonstruáljuk ez utóbbira vonatkozó eredményeit. Megmutatjuk, hogy egyrészt bizonyításai egyenértékűek a lineáris programozás dualitási tételeinek igazolásával, másrészt a gazdasági hatékonysági árak voltaképpen a mai értelemben vett árnyékárak. Rámutatunk arra is, hogy a gazdasági hatékonyság értelmezéséhez megfogalmazott modellje az Arrow-Debreu-McKenzie-féle általános egyensúlyelméleti modellek közvetlen előzményének tekinthető, tartalmazta azok szinte minden lényeges elemét és fogalmát - az egyensúlyi árak nem mások, mint a Koopmans-féle hatékonysági árak. Végezetül újraértelmezzük Koopmans modelljét a vállalati technológiai mikroökonómiai leírásának lehetséges eszközeként. Journal of Economic Literature (JEL) kód: B23, B41, C61, D20, D50. /===/ Generalizing from his experience in solving practical problems, Koopmans set about devising a linear model for analysing activity. Surprisingly, he found that economics at that time possessed no uniform, sufficiently exact theory of production or system of concepts for it. He set out in a pioneering study to provide a theoretical framework for a linear model for analysing activity by expressing first the axiomatic bases of production theory, which rest on the concept of technological sets. He is associated with exact definition of the concept of production efficiency and efficiency prices, and confirmation of their relation as mutual postulates within the linear model of activity analysis. Koopmans saw the present, purely technical definition of efficiency as a special case; he aimed to introduce and analyse the concept of economic efficiency. The study uses the duality precepts of linear programming to reconstruct the results for the latter. It is shown first that evidence confirming the duality precepts of linear programming is equal in value, and secondly that efficiency prices are really shadow prices in today's sense. Furthermore, the model for the interpretation of economic efficiency can be seen as a direct predecessor of the Arrow–Debreu–McKenzie models of general equilibrium theory, as it contained almost every essential element and concept of them—equilibrium prices are nothing other than Koopmans' efficiency prices. Finally Koopmans' model is reinterpreted as a necessary tool for microeconomic description of enterprise technology.

A production/recycling model with quality consideration

An integrated production–recycling system is investigated. A constant demand can be satisfied by production and recycling. The used items might be bought back and then recycled. The not recycled products are disposed off. Two types of models are analyzed. The first model examines and minimizes the EOQ related cost. The second model generalizes the first one by introducing additionally linear waste disposal, recycling, production and buyback costs. This basic model was examined by the authors in a previous paper. The main results are that a pure strategy (either production or recycling) is optimal. This paper extends the model for the case of quality consideration: it is asked for the quality of the bought back products. In the former model we have assumed that all returned items are serviceable. One can put the following question: Who should control the quality of the returned items? If the suppliers examine the quality of the reusable products, then the buyback rate is strongly smaller than one, α<1. If the user does it, then not all returned items are recyclable, i.e. the use rate is smaller than one, δ<1. Which one of the control systems are more cost advantageous in this case?

Decision support system for production control: Multiple criteria decision making in practice

This paper presents a development of decision support systems for solving scheduling problems. It consists of two parts — the first describing the production processes which can be handled by the system and the second describing how the system works.

Az ellátási láncban elfoglalt pozíció és a szolgálatosodás – üzleti modellek Európában (Supply chain position and servitization – business models in Europe)

A szerzők célja, hogy megvizsgálják, milyen kölcsönhatásban áll az ellátási láncban elfoglalt pozíció, valamint a szolgálatosodás szintje az európai termelővállalatoknál. Vizsgálatuk azt mutatja, hogy a globalizáció és a termelés nemzetközivé válása mindkét tényezőt jelentős mértékben befolyásolja. A termelés globalizációs trendjeinek megfelelően így a kelet-európai (fejlődő), illetve a nyugat-európai (fejlett) országokban eltérő üzleti modellek válnak dominánssá, amelyek különböző ellátásilánc-pozícióval és más-más szintű szolgáltatásnyújtással jellemezhetőek. A domináns üzleti modellek mellett természetesen más üzleti modellek is működőképesnek bizonyulhatnak a két vizsgált régióban. A létesítmények elhelyezésére, valamint az üzleti eredményességre vonatkozó mutatók elemzésbe történő bevonásával cikkük az Európában működő üzleti modellek kialakításának okára, valamint jövőbeli fenntarthatóságára is megpróbál választ adni. __________ The objective of this paper is to examine the relationship between supply chain position and level of servitization in European manufacturing companies. The analysis shows that globalization and internationalization of production has dramatic impact on both phenomena. Due to the globalization trends different business models became dominant in the less developed Eastern-European and the more developed Western European countries, which can be characterized by different supply chain position and servitization level. Certainly other business models can also be successful in the two regions. Involving facility location motivations and business performance indicators the article shed light on the reasons of why these business models came alive and how sustainable they can be.

Heterogenitás és technikai hatékonyság - a magyar specializált szántóföldi növénytermesztő üzemek esete = Heterogeneity and technical efficiency - the case of Hungary's specialized arable crop production units

A cikkben paneladatok segítségével a magyar gabonatermesztő üzemek 2001 és 2009 közötti technikai hatékonyságát vizsgáljuk. A technikai hatékonyság szintjének becslésére egy hagyományos sztochasztikus határok modell (SFA) mellett a látens csoportok modelljét (LCM) használjuk, amely figyelembe veszi a technológiai különbségeket is. Eredményeink arra utalnak, hogy a technológiai heterogenitás fontos lehet egy olyan ágazatban is, mint a szántóföldi növénytermesztés, ahol viszonylag homogén technológiát alkalmaznak. A hagyományos, azonos technológiát feltételező és a látens osztályok modelljeinek összehasonlítása azt mutatja, hogy a gabonatermesztő üzemek technikai hatékonyságát a hagyományos modellek alábecsülhetik. _____ The article sets out to analyse the technical efficiency of Hungarian crop farms between 2001 and 2009, using panel data and employing both standard stochastic frontier analysis and the latent class model (LCM) to estimate technical efficiency. The findings suggest that technological heterogeneity plays an important role in the crop sector, though it is traditionally assumed to employ homogenous technology. A comparison of standard SFA models that assumes the technology is common to all farms and LCM estimates highlights the way the efficiency of crop farms can be underestimated using traditional SFA models.