EFFECTS OF MUSCULAR STRETCHING AND SEGMENTAL STABILIZATION ON FUNCTIONAL DISABILITY AND PAIN IN PATIENTS WITH CHRONIC LOW BACK PAIN: A RANDOMIZED, CONTROLLED TRIAL

Objective: The purpose of this study was to compare the effects of 2 exercise programs, segmental stabilization exercises (SSEs) and stretching of trunk and hamstrings muscles, on functional disability, pain, and activation of the transversus abdominis muscle (TrA), in individuals with chronic low back pain. Methods: A total of 30 participants were enrolled in this study and randomly assigned to 1 of 2 groups as a function of intervention. In the segmental stabilization group (SS), exercises focused on the TrA and lumbar multifidus muscles, whereas in the stretching group (ST), exercises focused on stretching the erector spinae, hamstrings, and triceps surae. Severity of pain (visual analog scale and McGill pain questionnaire) and functional disability (Oswestry disability questionnaire) and TrA muscle activation capacity (Pressure Biofeedback Unit, or PBU) were compared as a function of intervention. Interventions lasted 6 weeks, and sessions happened twice a week (30 minutes each). Analysis of variance was used for intergroup and intragroup comparisons. Results: As compared with baseline, both treatments were effective in relieving pain and improving disability (P < .001). Those in the SS group had significantly higher gains for all variables. The stretching group did not effectively activate the TrA (P = .94). Conclusion: Both techniques improved pain and reduced disability. In this study, SS was superior to muscular stretching for the measured variables associated with chronic low back pain. (J Manipulative Physiol Ther 2012;35:279-285)

Influence of discount price announcements on consumer's behavior

The theoretical framework that underpins this research study is based on the Prospect Theory formulated by Kahneman and Tversky, and Thaler's Mental Accounting Theory. The research aims to evaluate the consumers' behavior when different patterns of discount are offered (in percentage and absolute value and for larger and smaller discounts). Two experiments were conducted to explore these patterns of behavior and the results that were obtained supported the view that the framing effect was a common occurrence. The patterns of choice of individuals in a sample were found to be different due to changes in the ways discounts were offered. This can be explained by the various ways of presenting discount rates that had an impact on the influence of purchase intentions, recommendations and quality perception.

Nutritional composition of rice bran submitted to different stabilization procedures

In order to inactivate enzymatic deterioration, whole rice bran samples were subjected to two stabilization methods. Changes in nutritional value in terms of, concerning chemical composition, minerals and fatty acid content, were evaluated to supplement existing data and promote the utilization of rice bran in the human diet. The following homemade heat treatments were applied: roasting on a conventional stove or heating in a microwave oven. Based on the results, the different heating methods affected sample composition, since the levels of some nutrients of treated samples showed significant changes (p<0.05) compared to corresponding raw samples. The rice bran treated on a conventional stove produced products with lower moisture (5.14±0.10 g/100 g) and nutrients such as sodium 11.8%; palmitic acid 9.9% and stearic acid 8.1%. The microwave oven procedure resulted in better nutrient preservation, with slightly higher moisture content (6.28±0.10 g/100 g), and appears to be a practical and rapid tool for home heat stabilization of rice bran.

Towards the stabilization of the low density elements in topology optimization with large deformation

This work addresses the treatment of lower density regions of structures undergoing large deformations during the design process by the topology optimization method (TOM) based on the finite element method. During the design process the nonlinear elastic behavior of the structure is based on exact kinematics. The material model applied in the TOM is based on the solid isotropic microstructure with penalization approach. No void elements are deleted and all internal forces of the nodes surrounding the void elements are considered during the nonlinear equilibrium solution. The distribution of design variables is solved through the method of moving asymptotes, in which the sensitivity of the objective function is obtained directly. In addition, a continuation function and a nonlinear projection function are invoked to obtain a checkerboard free and mesh independent design. 2D examples with both plane strain and plane stress conditions hypothesis are presented and compared. The problem of instability is overcome by adopting a polyconvex constitutive model in conjunction with a suggested relaxation function to stabilize the excessive distorted elements. The exact tangent stiffness matrix is used. The optimal topology results are compared to the results obtained by using the classical Saint Venant–Kirchhoff constitutive law, and strong differences are found.

Essays on Wage and Price Formation in Sweden

Study IReal Wage Determination in the Swedish Engineering Industry This study uses the monopoly union model to examine the determination of real wages and in particular the effects of active labour market programmes (ALMPs) on real wages in the engineering industry. Quarterly data for the period 1970:1 to 1996:4 are used in a cointegration framework, utilising the Johansen's maximum likelihood procedure. On a basis of the Johansen (trace) test results, vector error correction (VEC) models are created in order to model the determination of real wages in the engineering industry. The estimation results support the presence of a long-run wage-raising effect to rises in the labour productivity, in the tax wedge, in the alternative real consumer wage and in real UI benefits. The estimation results also support the presence of a long-run wage-raising effect due to positive changes in the participation rates regarding ALMPs, relief jobs and labour market training. This could be interpreted as meaning that the possibility of being a participant in an ALMP increases the utility for workers of not being employed in the industry, which in turn could increase real wages in the industry in the long run. Finally, the estimation results show evidence of a long-run wage-reducing effect due to positive changes in the unemployment rate. Study IIIntersectoral Wage Linkages in Sweden The purpose of this study is to investigate whether the wage-setting in certain sectors of the Swedish economy affects the wage-setting in other sectors. The theoretical background is the Scandinavian model of inflation, which states that the wage-setting in the sectors exposed to international competition affects the wage-setting in the sheltered sectors of the economy. The Johansen maximum likelihood cointegration approach is applied to quarterly data on Swedish sector wages for the period 1980:1–2002:2. Different vector error correction (VEC) models are created, based on assumptions as to which sectors are exposed to international competition and which are not. The adaptability of wages between sectors is then tested by imposing restrictions on the estimated VEC models. Finally, Granger causality tests are performed in the different restricted/unrestricted VEC models to test for sector wage leadership. The empirical results indicate considerable adaptability in wages as between manufacturing, construction, the wholesale and retail trade, the central government sector and the municipalities and county councils sector. This is consistent with the assumptions of the Scandinavian model. Further, the empirical results indicate a low level of adaptability in wages as between the financial sector and manufacturing, and between the financial sector and the two public sectors. The Granger causality tests provide strong evidence for the presence of intersectoral wage causality, but no evidence of a wage-leading role in line with the assumptions of the Scandinavian model for any of the sectors. Study IIIWage and Price Determination in the Private Sector in Sweden The purpose of this study is to analyse wage and price determination in the private sector in Sweden during the period 1980–2003. The theoretical background is a variant of the “Imperfect competition model of inflation”, which assumes imperfect competition in the labour and product markets. According to the model wages and prices are determined as a result of a “battle of mark-ups” between trade unions and firms. The Johansen maximum likelihood cointegration approach is applied to quarterly Swedish data on consumer prices, import prices, private-sector nominal wages, private-sector labour productivity and the total unemployment rate for the period 1980:1–2003:3. The chosen cointegration rank of the estimated vector error correction (VEC) model is two. Thus, two cointegration relations are assumed: one for private-sector nominal wage determination and one for consumer price determination. The estimation results indicate that an increase of consumer prices by one per cent lifts private-sector nominal wages by 0.8 per cent. Furthermore, an increase of private-sector nominal wages by one per cent increases consumer prices by one per cent. An increase of one percentage point in the total unemployment rate reduces private-sector nominal wages by about 4.5 per cent. The long-run effects of private-sector labour productivity and import prices on consumer prices are about –1.2 and 0.3 per cent, respectively. The Rehnberg agreement during 1991–92 and the monetary policy shift in 1993 affected the determination of private-sector nominal wages, private-sector labour productivity, import prices and the total unemployment rate. The “offensive” devaluation of the Swedish krona by 16 per cent in 1982:4, and the start of a floating Swedish krona and the substantial depreciation of the krona at this time affected the determination of import prices.

Are prescribing doctors sensitive to the price that their patients have to pay in the Spanish National Health System?

[EN] Background This study aims to design an empirical test on the sensitivity of the prescribing doctors to the price afforded for the patient, and to apply it to the population data of primary care dispensations for cardiovascular disease and mental illness in the Spanish National Health System (NHS). Implications for drug policies are discussed. Methods We used population data of 17 therapeutic groups of cardiovascular and mental illness drugs aggregated by health areas to obtain 1424 observations ((8 cardiovascular groups * 70 areas) + (9 psychotropics groups * 96 areas)). All drugs are free for pensioners. For non-pensioner patients 10 of the 17 therapeutic groups have a reduced copayment (RC) status of only 10% of the price with a ceiling of €2.64 per pack, while the remaining 7 groups have a full copayment (FC) rate of 40%. Differences in the average price among dispensations for pensioners and non-pensioners were modelled with multilevel regression models to test the following hypothesis: 1) in FC drugs there is a significant positive difference between the average prices of drugs prescribed to pensioners and non-pensioners; 2) in RC drugs there is no significant price differential between pensioner and non-pensioner patients; 3) the price differential of FC drugs prescribed to pensioners and non-pensioners is greater the higher the price of the drugs. Results The average monthly price of dispensations to pensioners and non-pensioners does not differ for RC drugs, but for FC drugs pensioners get more expensive dispensations than non-pensioners (estimated difference of €9.74 by DDD and month). There is a positive and significant effect of the drug price on the differential price between pensioners and non-pensioners. For FC drugs, each additional euro of the drug price increases the differential by nearly half a euro (0.492). We did not find any significant differences in the intensity of the price effect among FC therapeutic groups. Conclusions Doctors working in the Spanish NHS seem to be sensitive to the price that can be afforded by patients when they fill in prescriptions, although alternative hypothesis could also explain the results found.

Location-price competition with externality: an application to the Tenerife tram

[EN] This paper presents a location–price equilibrium problem on a tree. A sufficient condition for having a Nash equilibrium in a spatial competition model that incorporates price, transport, and externality costs is given. This condition implies both competitors are located at the same point, a vertex that is the unique median of the tree. However, this is not an equilibrium necessary condition. Some examples show that not all medians are equilibria. Finally, an application to the Tenerife tram is presented.

Dynamic stabilization of Rayleigh-Taylor instability of ablation fronts in inertial confinement fusion

One of the most important problems in inertial confinement fusion is how to find a way to mitigate the onset of the Rayleigh-Taylor instability which arises in the ablation front during the compression. In this thesis it is studied in detail the possibility of using for such a purpose the well-known mechanism of dynamic stabilization, already applied to other dynamical systems such as the inverted pendulum. In this context, a periodic acceleration superposed to the background gravity generates a vertical vibration of the ablation front itself. The effects of different driving modulations (Dirac deltas and square waves) are analyzed from a theoretical point of view, with a focus on stabilization of ion beam driven ablation fronts, and a comparison is made, in order to look for optimization.

Optical power stabilization of a laser diode for qnd measurement

La realizzazione di stati non classici del campo elettromagnetico e in sistemi di spin è uno stimolo alla ricerca, teorica e sperimentale, da almeno trent'anni. Lo studio di atomi freddi in trappole di dipolo permette di avvicinare questo obbiettivo oltre a offrire la possibilità di effettuare esperimenti su condesati di Bose Einstein di interesse nel campo dell'interferometria atomica. La protezione della coerenza di un sistema macroscopico di spin tramite sistemi di feedback è a sua volta un obbiettivo che potrebbe portare a grandi sviluppi nel campo della metrologia e dell'informazione quantistica. Viene fornita un'introduzione a due tipologie di misura non considerate nei programmi standard di livello universitario: la misura non distruttiva (Quantum Non Demolition-QND) e la misura debole. Entrambe sono sfruttate nell'ambito dell'interazione radiazione materia a pochi fotoni o a pochi atomi (cavity QED e Atom boxes). Una trattazione delle trappole di dipolo per atomi neutri e ai comuni metodi di raffreddamento è necessaria all'introduzione all'esperimento BIARO (acronimo francese Bose Einstein condensate for Atomic Interferometry in a high finesse Optical Resonator), che si occupa di metrologia tramite l'utilizzo di condensati di Bose Einstein e di sistemi di feedback. Viene descritta la progettazione, realizzazione e caratterizzazione di un servo controller per la stabilizzazione della potenza ottica di un laser. Il dispositivo è necessario per la compensazione del ligh shift differenziale indotto da un fascio laser a 1550nm utilizzato per creare una trappola di dipolo su atomi di rubidio. La compensazione gioca un ruolo essenziale nel miglioramento di misure QND necessarie, in uno schema di feedback, per mantenere la coerenza in sistemi collettivi di spin, recentemente realizzato.

Cut-first branch-and-price-second for the capacitated arc-routing problem

This paper presents the first full-fledged branch-and-price (bap) algorithm for the capacitated arc-routing problem (CARP). Prior exact solution techniques either rely on cutting planes or the transformation of the CARP into a node-routing problem. The drawbacks are either models with inherent symmetry, dense underlying networks, or a formulation where edge flows in a potential solution do not allow the reconstruction of unique CARP tours. The proposed algorithm circumvents all these drawbacks by taking the beneficial ingredients from existing CARP methods and combining them in a new way. The first step is the solution of the one-index formulation of the CARP in order to produce strong cuts and an excellent lower bound. It is known that this bound is typically stronger than relaxations of a pure set-partitioning CARP model.rnSuch a set-partitioning master program results from a Dantzig-Wolfe decomposition. In the second phase, the master program is initialized with the strong cuts, CARP tours are iteratively generated by a pricing procedure, and branching is required to produce integer solutions. This is a cut-first bap-second algorithm and its main function is, in fact, the splitting of edge flows into unique CARP tours.

Laboratory and field investigation of the performance of suction drains, a novel low-carbon technology for ground stabilization

Con riferimento alla realizzazione di tunnel per servizi interrati, l’incertezza che contraddistingue il quadro geologico, oltre che incidere sui costi, riveste un ruolo chiave nella progettazione preliminare. Sebbene un’approfondita caratterizzazione geotecnica e geologica del volume di terreno inerente l’opera di scavo sia generalmente parte integrante del progetto, non è comunque possibile eliminare del tutto tali incertezze per via dell’estensione del volume interessato oltre che per la disomogeneità che sempre contraddistingue il terreno. Generalmente, investigazioni in corso d’opera e interventi di stabilizzazione devono essere previsti per contenere i costi di perforazione ed ottimizzare la progettazione. Ad esempio, tra i metodi di esplorazione geotecnica figurano i tunnel pilota, i quali sono in grado di garantire un’ottimale caratterizzazione del quadro geotecnico del sottosuolo. Con riferimento agli interventi di stabilizzazione del terreno, adottabili laddove una perforazione tradizionale non consentirebbe il tunnelling, vi è un vasta gamma di scelta. Pertanto, da una prima analisi delle problematiche connesse al tunnelling emerge che la stabilizzazione delle facce di scavo riveste un’importanza e un risconto applicativo di prim’ordine. Questa tesi si inserisce all’interno di un progetto che promuove un’innovativa ed economica tecnica di stabilizzazione dei tunnel per suzione tenendo quindi conto dell’influenza della suzione sulla coesione non drenata.

Peptide receptor radioligand therapy is an effective treatment for the long-term stabilization of malignant gastrinomas

Gastrinomas, a rare group of neuroendocrine tumors, are responsible for severe peptic disease and diarrhea. Although symptomatic control may be achieved with proton-pump inhibitors (PPIs) and somatostatin analogues (SSAs), data are limited regarding the possible antitumor effect of the peptide receptor radioligand therapy (PRRT) with radiolabeled SSAs in gastrinoma patients. The goal of this study was to assess the effect of PRRT on symptoms, gastrin secretion, and tumor load in patients with progressive malignant gastrinomas.

[Intramedullary claw for stabilization of proximal humerus fractures: a comparison with other semirigid techniques]

Proximal humerus fractures (pHF) are common. In this retrospective study intra-operative and postoperative data and complications of patients stabilized with conventional semirigid techniques (pins, n=30; helix wire, n=19) or a novel semirigid technique, the intramedullary claw (IMC, n=82) were compared. The type and frequency of postoperative complications differed between the groups (p<0.001). The IMC is a novel semirigid technique to stabilize pHF and seems to result in fewer complications than pins or helix wire. The frequency and relevance of a loss of repositioning in patients after IMC implantation need to be elucidated in long-term studies.