The mineralogy and chemistry of the German and Portuguese tiles used to face a historic building in the Amazon region and their natural susceptibility to tropical weathering

During the 19th century, the most prominent buildings of the city of Belém were faced entirely with tiles manufactured in Portugal and Germany, which now exhibit distinct degrees of degradation. The Pinho mansion is one of the most important of these buildings and was selected for the investigation of the action of the tropical Amazonian climate on the degradation of the tiles. To achieve this objective, the tiles were mapped for organic and inorganic degradation, and samples were collected for analysis. The minerals were determined by XRD, the chemical composition by classical wet methods and SEM/EDS, and the microorganisms under the microscope. The results show that the German and Portuguese tiles are quite different in their composition. While both ceramic bodies are composed of SiO2 and Al2O3, CaO was found only in the Portuguese tile. The low Na2O and K2O contents indicate the addition of materials to reduce the fusion temperature. SiO2 and PbO are the main constituents of the glaze, with CoO and FeO being added as pigment. The ceramic body of the German tiles is constituted of quartz, mullite, and cristobalite, in contrast with the Portuguese tiles, which are made of quartz, gehlenite, diopside, calcite, and feldspars. The glazes are XRD-amorphous. The chemical and mineralogical differences between the German and Portuguese tiles indicate that they were produced from different raw materials under distinct thermal processes. The most prominent weathering-related modifications are the thin layers (German tiles), oxidation stains, dark stains, the detachment of the tile (Portuguese tiles), loss of the glaze and powdering of the ceramic body (Portuguese tiles) through the establishment of Cyanophyta and Bacillariophyta.. The distinct degradation patterns of the tiles exposed to the tropical Amazon climate are a consequence of their distinct mineralogy and chemistry.

Chemical composition of phytoplankton from the estuaries of Eastern Amazonia

Phytoplankton is important bioindicator of chemical and biological modifications of natural ecosystems. The objective of this study was to determine the total chemical composition of the phytoplankton of the Pará and Mocajuba estuaries on the eastern coast of the Amazon region in the Brazilian state of Pará. The chemical composition of the surface water, bottom sediments (total sample and bioavailable fraction), and the phytoplankton were determined by inductively coupled plasma optical emission spectrometry. Phytoplankton contained high concentrations of Ca, P, Mn, Fe, Zn, Al, Ba, and Pb. The phytoplankton of the Mocajuba estuary is rich in Fe (2,967-84,750 µg g-1), while those from the Pará is rich in Al (1,216-15,389 µgg-1), probably reflecting divergent anthropogenic inputs. Both samples indicated a high bioconcentration factor derived from both the water and the bioavailable fraction, reflecting the efficiency of these organisms in the concentration of metals.

Hematological responses of tambaqui Colossoma macropomum (Serrassalmidae) fed with diets supplemented with essential oil from Mentha piperita (Lamiaceae) and challenged with Aeromonas hydrophila

ABSTRACTIn fish farmings, diseases can be reduced by using immunostimulants. The aim of this study was to evaluate the immunostimulant potential of Mentha piperita in tambaqui fed with 0, 0.5, 1.0 and 1.5% of oil per kg of commercial fish feed. The fish were inoculated with Aeromonas hydrophila to challenge them. Hematological and biochemical parameters were determined after 30 days of feeding and seven days after the challenge. There was no mortality and M. piperita oil did not influence fish production parameters. However, blood hemoglobin concentration (Hb) increased in the fish fed with 0.5 and 1.5% of oil per kg of diet; albumin increased in those fed with 1.0%; cholesterol increased in all groups with oil; and triglycerides increased in those fed with 0.5%. After the bacterial challenge, the fish showed decreases in Hb when fed with diet enriched with 1.5% oil per kg of diet, in mean corpuscular volume with 1.0% and in mean corpuscular hemoglobin concentration with 0 and 1.5%. Protein levels increased in groups with 0 and 1.5% of oil and albumin when fed with 0 and 1.0%; cholesterol levels increased in the control group; and high levels of triglycerides were observed in the groups with 0, 0.5 and 1.5%. Thus, M. piperita essential oil promoted hematological alterations in tambaqui and can be recommended in diets containing up to 1.0% per kg, because of the minimal physiological modifications caused. However, additional studies are necessary to obtain more information regarding to the physiological effects of this immunostimulant.

Leaf anatomy of Qualea parviflora (Vochysiaceae) in three phytophysiognomies of the Mato Grosso State, Brazil

ABSTRACT Leaves have a variety of morphological and anatomical characters mainly influenced by climatic, edaphic and biotic factors. The aim of this study was to describe the anatomical leaf traits of Qualea parviflora from three phytophysiognomies. The studied phytophysiognomies were Amazon Savannah on rocky outcrops (ASR), Transition Rupestrian Cerrado (TRC), and Cerradão (CDA). Freehand sections of the leaf blade were made and stained with 0.5% astra blue and with basic fuchsin. From the adaxial and abaxial leaf surface, freehand paradermal sections were made for epidermis analysis. The Jeffrey´s method, with modifications, was used in the epidermis dissociation process. The samples from the TRC phytophysiognomy had relatively smaller ordinary epidermal cells, higher abundance of trichomes, and mesophyll with few intercellular spaces, in comparison to the other phytophysiognomies. The leaves from the ASR phytophysiognomy had higher stomatal index (SI = 21.02), and five to six layers of sclerenchyma surrounding the midrib vascular bundle. The secondary vascular bundles had thicker cell walls and the bundle sheath extended up to the epidermal tissue of both leaf sides. Leaves from the CDA phytophysiognomy had mesomorphic environmental traits, such as a thinner cuticle. It is concluded that trees from ASR and TRC phytophysiognomies have xeromorphic traits following the environmental conditions where they occur.

Measurement of differential J/psi production cross sections and forward-backward ratios in p plus Pb collisions with the ATLAS detector

Measurements of differential cross sections for J/ψ production in p+Pb collisions at sNN−−−−√=5.02 TeV at the CERN Large Hadron Collider with the ATLAS detector are presented. The data set used corresponds to an integrated luminosity of 28.1 nb−1. The J/ψ mesons are reconstructed in the dimuon decay channel over the transverse momentum range 8modifications of charmonium and b-quark production in p+Pb collisions.

Otimização da remoção de condensados num mural de frio

Dissertação de mestrado integrado em Engenharia Mecânica

Geração de aplicações a partir de especificações UML como fator de sucesso para o desenvolvimento de sistemas de informação

Dissertação de mestrado integrado em Engenharia e Gestão de Sistemas de Informação

Metabolic engineering with multi-objective optimization of kinetic models

Kinetic models have a great potential for metabolic engineering applications. They can be used for testing which genetic and regulatory modifications can increase the production of metabolites of interest, while simultaneously monitoring other key functions of the host organism. This work presents a methodology for increasing productivity in biotechnological processes exploiting dynamic models. It uses multi-objective dynamic optimization to identify the combination of targets (enzymatic modifications) and the degree of up- or down-regulation that must be performed in order to optimize a set of pre-defined performance metrics subject to process constraints. The capabilities of the approach are demonstrated on a realistic and computationally challenging application: a large-scale metabolic model of Chinese Hamster Ovary cells (CHO), which are used for antibody production in a fed-batch process. The proposed methodology manages to provide a sustained and robust growth in CHO cells, increasing productivity while simultaneously increasing biomass production, product titer, and keeping the concentrations of lactate and ammonia at low values. The approach presented here can be used for optimizing metabolic models by finding the best combination of targets and their optimal level of up/down-regulation. Furthermore, it can accommodate additional trade-offs and constraints with great flexibility.

Tapping the wealth of microbial data in high-throughput metabolic model reconstruction

Genome-scale metabolic models are valuable tools in the metabolic engineering process, based on the ability of these models to integrate diverse sources of data to produce global predictions of organism behavior. At the most basic level, these models require only a genome sequence to construct, and once built, they may be used to predict essential genes, culture conditions, pathway utilization, and the modifications required to enhance a desired organism behavior. In this chapter, we address two key challenges associated with the reconstruction of metabolic models: (a) leveraging existing knowledge of microbiology, biochemistry, and available omics data to produce the best possible model; and (b) applying available tools and data to automate the reconstruction process. We consider these challenges as we progress through the model reconstruction process, beginning with genome assembly, and culminating in the integration of constraints to capture the impact of transcriptional regulation. We divide the reconstruction process into ten distinct steps: (1) genome assembly from sequenced reads; (2) automated structural and functional annotation; (3) phylogenetic tree-based curation of genome annotations; (4) assembly and standardization of biochemistry database; (5) genome-scale metabolic reconstruction; (6) generation of core metabolic model; (7) generation of biomass composition reaction; (8) completion of draft metabolic model; (9) curation of metabolic model; and (10) integration of regulatory constraints. Each of these ten steps is documented in detail.

Bacterial cellulose surface modification

The unique properties of bacterial nanocellulose (BNC) provide the basis for a wide range of applications in human and veterinary medicine, odontology, pharmaceuticals, acoustic and filter membranes, biotechnological devices, and in the food and paper industry. In this chapter, an overview of surface modifications of bacterial cellulose is presented. Depending on the envisaged applications, chemical modifications, incorporation of bioactive molecules, modification of the porosity, crystallinity, and biodegradability may be obtained, further enlarging the potential of BNC.

Zeolite-based nanomaterials for the control of opportunistic pathogenic microorganisms

Dissertação de mestrado em Applied Biochemistry (área de especialização em Biomedicine)

Diet and medication in the treatment of hyperuricemia in hypertensive patients

OBJECTIVE: To evaluate the effects of diet and medication, either isolated or associated, on serum levels of uric acid in patients with hyperuricemia. METHODS: We studied patients from the Hypertension Unit of the University of Goias who had hyperuricemia (men > or = 8.5mg/dL and women > or = 7.5mg/dL). We divided the patients into three groups: G1 (low purine diet), G2 (low purine diet + medication), and G3 (medication only). Patients received allopurinol, 150mg/day titrated up to 300mg/dL when necessary. Patients were evaluated with regards to their lifestyles (diet, smoking, physical, activity, alcohol consumption), uric acid, blood pressure, use of medication, body mass index, cholesterol, and triglyceride. Follow-up took place in weeks 0 (M1), 6 (M2), 12 (M3) during the intervention and in week 36(M4) after the study was completed. RESULTS: Fifty-five patients participated in the study, 31 women, mean age 54.4±10.6 years, body mass index 28.6±3.9kg/m². A similar reduction (p<0.001) in uric acid levels occurred in the three intervention groups. In week 36 (M4), after 24 weeks without intervention, a tendency toward elevation of uricemia was noted in G2 and G3, and a continuous drop in uricemia was noted in G1. No significant modifications were observed in the other variables analyzed. CONCLUSION: Considering the cost x benefit relationship, a diet low in purine should be the 1st therapeutic option for controlling hyperuricemia in patients with similar characteristic to the ones presented in this study.

Intracoronary brachytherapy in the treatment of in-stent restenosis. Initial experience in Brazil

Intracoronary brachytherapy using beta or gamma radiation is currently the most efficient type of therapy for preventing the recurrence of coronary in-stent restenosis. Its implementation depends on the interaction among interventionists, radiotherapists, and physicists to assure the safety and quality of the method. The authors report the pioneering experience in Brazil of the treatment of 2 patients with coronary in-stent restenosis, in whom beta radiation was used as part of the international multicenter randomized PREVENT study (Proliferation REduction with Vascular ENergy Trial). The procedures were performed rapidly and did not require significant modifications in the traditional techniques used for conventional angioplasty. Alteration in the radiological protection devices of the hemodynamic laboratory were also not required, showing that intracoronary brachytherapy using beta radiation can be incorporated into the interventional tools of cardiology in our environment.

Química y actividad biológica en Huperzia saururus. Chemistry and biological activity in Huperzia saururus.

El presente proyecto apunta a buscar una posible solución a dos problemáticas de salud que afectan a un importante grupo de la población mundial y son los asociados a la enfermedad de Alzheimer (EA) y a la disfunción eréctil. La EA es una enfermedad neurodegenerativa progresiva caracterizada por la pérdida de memoria a corto plazo, entre otras manifestaciones. En la actualidad la terapia más utilizada son los inhibidores de la acetilcolinesterasa (AChE), ya que acetilcolina es el principal neurotransmisor afectado. No obstante, los agentes terapéuticos utilizados presentan efectos no deseados a nivel gastrointestinal, lo que motiva la búsqueda de nuevos agentes. A partir del estudio de la especie autóctona Huperzia saururus aislamos hasta el presente 10 alcaloides, algunos de los cuales resultaron activos sobre la retención de memoria, investigación realizada mediante ensayos tanto in vitro como in vivo. A partir de los promisorios resultados obtenidos se continuarán profundizando estos estudios y también se buscará el farmacóforo, la parte de la estructura responsable de la actividad. Para ello, se realizarán modificaciones químicas de los grupos funcionales y los productos obtenidos serán igualmente evaluados por su actividad sobre memoria. Los que resulten activos serán investigados en relación a su toxicidad, en la búsqueda de potenciales agentes terapéuticos. Paralelamente se estudiarán las diferentes familias de compuestos presentes en la especie, dado que el uso popular proclama su efecto afrodisíaco. La búsqueda de un afrodisíaco perfecto que incremente el deseo sexual, el placer y el desempeño, ha sido una constante desde los tiempos remotos. En todos los casos, se ha buscado mejorar el rendimiento sexual o combatir la disfunción eréctil (DE). Este término se describe como “la incapacidad constante para alcanzar o mantener una erección que es satisfactoria para el rendimiento sexual”. Para investigar la actividad biológica de H. saururus, los extractos y compuestos aislados serán evaluados por la generación de NO que produzcan, la que será estimada mediante la acumulación de nitrito, metabolito estable del NO, en sobrenadantes de cultivo de células endoteliales (HUVEC). Los que resulten efectivos serán evaluados mediante ensayos in vivo tales como, el de conducta sexual en machos y de comportamiento de monta. Del mismo modo que para los alcaloides, se estudiará la toxicidad de los compuestos que resulten activos a los fines de proseguir la metodología en la investigación preclínica de potenciales medicamentos. The present Project aims to look for a possible solution for two health problems that affect an important group of world population and they are those associated to Alzheimer Disease (AD) and Erectile Dysfunction. AD is a neurodegenerative progressive disease characterized by short term memory loss, among other signs. Nowadays the most used therapy are the acethylcholinesterase inhibitors (AChE), in view that the acethylcholine is the main neurotransmitter affected. Nevertheless, the therapeutic agents used present collateral effects at gastrointestinal level, so it motivates the search for new agents. From the autochthonous species Huperzia saururus we have isolated 10 alkaloids until the present, some of which were active on memory retention, investigation developed in vitro and in vivo. After these promising results, these studies will be continued, as well as the search for the pharmacophore. For this reason, chemical modifications on functional groups will be done and the obtained products will be evaluated on their activity on memory as well. In line with this, the different families of compounds present in H. saururus will be studied in view that the popular use claims its aphrodisiac effect. The search for a perfect aphrodisiac that increase the sexual desire, the pleasure and performance was a constant since the old times. In all the cases it was looked a better sexual performance or fight against the erectile dysfunction (DE). For investigate the biological activity of H. saururus, the extracts and the isolated compounds will be evaluated on the NO generation, which will be estimated by means of nitrite accumulation, stable metabolite of NO, in supernatants of endothelial cell cultures (HUVEC). The compounds that appear effectives will be evaluated by in vivo assays such as sexual male behavior, and mount behavior. As for alkaloids, toxicity of active compounds will be studied to follow the pre-clinic methodology research of potential medicines.

Mejoramiento del comportamiento térmico de sistemas de calentamiento de agua solares termosifónicos hechos con materiales no convencionales y con tanques de almacenamiento verticales y horizontales Performance improvement of solar thermosyphonic systems for water heating made of non conventional materials and using horizontal and vertical storage tanks

El objeto de estudio de este proyecto son los sistemas de calentamiento de agua mediante energía solar que funcionan termosifónicamente. En particular se tratará con dos diseños particulares generados por fabricantes de la Provincia de Córdoba y que han solicitado el asesoramiento del Grupo de Energía Solar (GES) para el mejoramiento de la performance térmica de dichos equipos. Se trata de dos sistemas que tienen materiales no tradicionales y se diferencian además por tener una distinta disposición del tanque de almacenamiento: uno es en forma vertical y el otro en forma horizontal. Basados en los resultados de un ensayo bajo norma internacional, donde se detectaron algunas puntos factibles de mejora, se propone en este proyecto el análisis en detalle de los equipos, para lo cual se les debe desarmar completos, para realizar un estudio analítico y experimental de los mismos con el objeto de hacer un planteo teórico-analítico del comportamiento de los mismos, con la implementación de propuestas de mejora y chequeo de los resultados. Se propone entonces como objetivo lograr un mejoramiento de la performance térmica de los citados equipos a partir de un estudio experimental y analítico. Asumiendo esta posibilidad de mejora, se plantea la hipótesis de que es posible representar el funcionamiento de estos equipos mediante modelos físico-matemáticos desarrollados a partir de ecuaciones y correlaciones conocidas y procesos a interpretar mediante resoluciones numéricas y softwares específicos de simulación. De esta manera, se plantea el despieze completo de los equipos para estudiar en detalle su estructura y conexiones internas y a partir de la geometría, dimensiones y propiedades termofísicas de materiales constructivos y fluidos de trabajo, realizar modelos físico-matemáticos que permitan realizar variaciones de propiedades y geometría y así buscar las mejores combinaciones que produzcan equipos más eficientes térmicamente. Los modelos físico-matemáticos serán codificados en lenguajes de alto nivel para poder luego de una validación de los modelos, correr simulaciones en un software de reconocimiento internacional que permite sumar dichos modelos mediante un protocolo de comunicación, haciendo que las poderosas prestaciones del software se puedan aplicar a nuestros modelos. Se complementará el estudio con un análisis exergético para identificar los puntos críticos en que se producen las pérdidas de oportunidad de aprovechar la energía disponible, para así analizar cómo solucionar los problemas en dichos puntos. Los materiales a utilizar serán los propios equipos provistos por los fabricantes, que serán modificados convenientemente para operarlos como prototipos Se espera obtener un conocimiento acabado de los procesos y principios de funcionamiento de los equipos, que permita plantear las mejoras, las cuales se implementarán en los prototipos, realizándose una medición mediante norma igual a la inicial para ver en que magnitud se logran las mejoras esperadas. Se pretende además que las mejoras a implementar, en la etapa de transferencia a las empresas involucradas, redunden no sólo en un beneficio técnico, sino que también los sea desde el punto de vista económico. Para ello se trabajará también sobre los procesos y métodos de fabricación para que los equipos mejorados no sean mas caros que los originales y de ser posible sean aún más económicos, todo esto apuntando a la difusión de la energía solar térmica y poner al alcance de todos estos equipos tan convenientes para la propagación de las energías limpias. El proyecto redundará también en un importante beneficio para el conocimiento de la comunidad científica en general, con el aporte de nuevos resultados en diseños novedosos y con nuevos materiales. Además, la institución se beneficiará con la formación que obtendrán los integrantes del proyecto, muchos de ellos en etapa de realización de sus estudios de posgrado y en una etapa importante de su vida como investigadores. The main goal of this project is the improvement of two thermosyphonic solar water heating systems, made of non conventional materials and with different arrangement of their storage tanks: one is vertical and the other one horizontal. The thermosyphonic systems are provided by manufacturers of the Córdoba Province, who came to the Solar Energy Group (GES) of the National University of Río Cuarto looking for help for the design of their products. In an agreement with these manufacturers, it was proposed this project in order to work analytically and experimentally in order to obtain physical-mathematical models of these two systems, which allow for changes to look by means of simulations the best changes to implement on the equipments for the improvement of their thermal performance. Then, the materials to be used are the proper systems provided by the manufacturers, which will be disarmed to be studied in detail. After the analytical study the proposals of improvement will be implemented in a high level language of programming to perform simulations in the environment of a well-known software for energy simulations (TRNSYS). After the simulations, the best modifications will be physically implemented in the prototypes to perform finally the same normalized test of the beginning and check the magnitude of the implemented improvements. The importance of this project is based on the offer of better systems the companies would make, which would benefit the deployment of the thermal solar energy. Another relevant point is to make the new equipments at the same cost of the previous ones or cheaper, in order to achieve a good deployment of the solar water heating systems; then, the manufacture processes and methods must be studied to obtain not only good technical solutions, but also economical equipments. In addition, this project will contribute to the increasing of the knowledge in the area of thermosyphonic solar systems and the training of postgraduate students.