Avaliação do desempenho de argamassas à base de cimento Portland para rejuntamento de placas cerâmicas tipo II com adição de pó de borracha de pneus

In this work it is assessed the performance of Portland cement-based mortar to the grouting of type II ceramic plates with the addition of unusable tire rubber powder. It is presented a bibliographical review about the subject in which is done the theoretical and methodological foundation of the whole investigative process. The analyzed universe comprises a sample of mortar to the grouting of conventional ceramic plates type II (reference sample) and five more samples to the grouting of ceramic plates type II, which were made up of the addition of unusable tire rubber powder in the respective proportion (in mass) of 4%, 8%, 12%, 16% and 20%. These mortar samples were subject to the trials of determination of the consistency index (Brazilian Standard NBR 13276:2005), water retention ( Brazilian Standard NBR 14992 Attachment B:2003), permeability in 240 minutes (Brazilian Standard NBR 14992 Attachment G:2003), absorption of water by immersion (Brazilian Standard NBR 9781:2013), resistance to compression (Brazilian Standard NBR14992 Attachment D: 2003), resistance to traction in the flexion (Brazilian Standard NBR 13279:2005), resistance of traction adherence (Brazilian Standard NBR 14081 part 4:2012) and hardened mass density (Brazilian Standard NBR 13280: 2005). It has been found out from the analyzes of the results in the trial the following situation: the reference mortar used met the established requirements in the norms of specifications corresponding to only six from the eight parameters assessed in the research; the mortar with addition of 4,0% of tire rubber powder met the established requirements corresponding to only the resistance to compression and the resistance of adherence to traction. Thus, the other kinds of mortar with addition of 8,0 %, 12,0 %, 16,0 % and 20,0 % of tire rubber powder met the requirements of specifications corresponding to only the resistance to compression and the resistance of adherence to traction. This result concludes that the adding of tire rubber powder does not grant improvement to the mortar of type II grouting to the laying of ceramic plates.

Influência do tempo de adição do policarboxilato em pastas de cimento Portland para cimentação de poços petrolíferos

Cement pastes used in cementing oil wells operations are prepared according to the specific characteristics of each well. The physical properties requested for each folder formulation depend on the temperature and pressure of the well to be cemented. The rheological properties of the pulp are important control parameter for efficiency in transportation and positioning the folder during the cementing operation. One of the main types of additive used for the adjustment of rheological properties of cement pastes is the dispersant additive. This work aims to study the influence of variation of the time of addition of the polycarboxylate (0, 5, 10 and 15 minutes) in cement pastes, considering the initial periods of hydration of cement particles as fundamental point for better performance dispersant additive. Pastes were prepared with a density set at 15.6 lb/gal (1.87 g/cm3) and polycarboxylate concentrations ranging from 0.01 gpc to 0.05 gpc circulation temperature (BHCT) of 51°C and static temperature (BHST) of 76 C. The pastes were characterized from a rheological measurements, volume filtered, thickening time and resistance to compression formulations. Also were carried out tests Diffraction X-ray (XRD) and Scanning Electron Microscopy (MEV). The results showed that the addition of policaboxilato after 15 minutes decreased by 70% the values of rheological parameters. According to results of DRX and MEV, the addition of dispersant after 15 minutes did not affect the chemical reactions and subsequent formation of cement hydration products. A study of the economic feasibility to realize the financial benefits of the technique, which can be seen only with the use of the technique in this work to reduce the cost of production of cement paste was carried out, can get up to $ 1015.00 for each folder 100 barrels produced with said formulations.

Influência do tempo de adição do policarboxilato em pastas de cimento Portland para cimentação de poços petrolíferos

Cement pastes used in cementing oil wells operations are prepared according to the specific characteristics of each well. The physical properties requested for each folder formulation depend on the temperature and pressure of the well to be cemented. The rheological properties of the pulp are important control parameter for efficiency in transportation and positioning the folder during the cementing operation. One of the main types of additive used for the adjustment of rheological properties of cement pastes is the dispersant additive. This work aims to study the influence of variation of the time of addition of the polycarboxylate (0, 5, 10 and 15 minutes) in cement pastes, considering the initial periods of hydration of cement particles as fundamental point for better performance dispersant additive. Pastes were prepared with a density set at 15.6 lb/gal (1.87 g/cm3) and polycarboxylate concentrations ranging from 0.01 gpc to 0.05 gpc circulation temperature (BHCT) of 51°C and static temperature (BHST) of 76 C. The pastes were characterized from a rheological measurements, volume filtered, thickening time and resistance to compression formulations. Also were carried out tests Diffraction X-ray (XRD) and Scanning Electron Microscopy (MEV). The results showed that the addition of policaboxilato after 15 minutes decreased by 70% the values of rheological parameters. According to results of DRX and MEV, the addition of dispersant after 15 minutes did not affect the chemical reactions and subsequent formation of cement hydration products. A study of the economic feasibility to realize the financial benefits of the technique, which can be seen only with the use of the technique in this work to reduce the cost of production of cement paste was carried out, can get up to $ 1015.00 for each folder 100 barrels produced with said formulations.

Life history of harbor porpoises (Phocoena phocoena) in Scottish (UK) waters

Peer reviewed

Life history of harbor porpoises (Phocoena phocoena) in Scottish (UK) waters

Peer reviewed

Life history of harbor porpoises (Phocoena phocoena) in Scottish (UK) waters

Peer reviewed

A Predictive Thermal Habitat Model for Harbor Seals in the Northwest Atlantic

We analyzed projections of current and future ambient temperatures along the eastern United States in relationship to the thermal tolerance of harbor seals in air. Using the earth systems model (HadGEM2-ES) and representative concentration pathways (RCPs) 4.5 and 8.5, which are indicative of two different atmospheric CO2 concentrations, we were able to examine possible shifts in distribution based on three metrics: current preferences, the thermal limit of juveniles, and the thermal limits of adults. Our analysis focused on average ambient temperatures because harbor seals are least effective at regulating their body temperature in air, making them most susceptible to rising air temperatures in the coming years. Our study focused on the months of May, June, and August from 2041-2060 (2050) and 2061-2080 (2070) as these are the historic months in which harbor seals are known to annually come ashore to pup, breed, and molt. May, June, and August are also some of the warmest months of the year. We found that breeding colonies along the eastern United States will be limited by the thermal tolerance of juvenile harbor seals in air, while their foraging range will extend as far south as the thermal tolerance of adult harbor seals in air. Our analysis revealed that in 2070, harbor seal pups should be absent from the United States coastline nearing the end of the summer due to exceptionally high air temperatures.

Race, Power and Economic Extraction in Benton Harbor, MI

My dissertation investigates twin financial interventions—urban development and emergency management—in a single small town. Once a thriving city drawing blacks as blue-collar workers during the Great Migration, Benton Harbor, Michigan has suffered from waves of out-migration, debt, and alleged poor management. Benton Harbor’s emphasis on high-end economic development to attract white-collar workers and tourism, amidst the poverty, unemployment, and disenfranchisement of black residents, highlights an extreme case of American urban inequality. At the same time, many bystanders and representative observers argue that this urban redevelopment scheme and the city’s takeover by the state represent Benton Harbor residents’ only hope for a better life. I interviewed 44 key players and observers in local politics and development, attended 20 public meetings, conducted three months of observations, and collected extensive archival data. Examining Benton Harbor’s time under emergency management and its luxury golf course development as two exemplars of a larger relationship, I find that the top-down processes allegedly intended to alleviate Benton Harbor’s inequality actually reproduce and deepen the city’s problems. I propose that the beneficiaries of both plans constitute a white urban regime active in Benton Harbor. I show how the white urban regime serves its interests by operating an extraction machine in the city, which serves to reproduce local poverty and wealth by directing resources toward the white urban regime and away from the city.

Evaluation of Bond Retainage in Portland Cement Concrete Overlays by Infrared Thermography and Ground Penetrating Radar, HR-537, 1988

The purpose of this project was to evaluate the location and quantities of debonding in selected portland cement concrete (PCC) overlays. The project entailed an infrared thermographic survey and a ground penetrating radar survey of the PCC overlays to locate areas of debonding between the overlays and the original pavement. An infrared scanner is capable of locating these areas because of the temperature differential which is established between bonded and debonded areas under certain environmental conditions. A conventional video inspection of the top surface of the pavement was also completed in conjunction with the infrared thermographic survey to record the visual condition of the pavement surface. The ground penetrating radar system is capable of locating areas of debonding by detecting return wave forms generated by changes in the dielectric properties at the PCC overlay original pavement interface. This report consists of two parts; a text and a set of plan sheets. The text summarizes the procedures, analyses and conclusions of the investigation. The plan sheets locate specific areas of debonding, as identified through field observations.

Fatty acid synthesis from U-14C glucose, U-14C fructose, L-U-14C alanine and 3H2O in liver slices and adipose tissue from Bar-Harbor obese-hyperglycemic mice.

info:eu-repo/semantics/published

Molecular cloning and expression of leptin in gray and harbor seal blubber, bone marrow, and lung and its potential role in marine mammal respiratory physiology

Leptin is a multifunctional hormone, produced predominantly in adipocytes. It regulates energy balance through its impact on appetite and fat metabolism, and its concentration indicates the size of body fat reserves. Leptin also plays a vital role in stretch-induced surfactant production during alveolar development in the fetus. The structure, expression pattern, and role of leptin have not previously been explored in marine mammals. Phocid seals undergo cyclical changes in body composition as a result of prolonged fasting and intensive foraging bouts and experience rapid, dramatic, and repeated changes in lung volume during diving. Here, we report the tissue-specific expression pattern of leptin in these animals. This is the first demonstration of leptin expression in the lung tissue of a mature mammal, in addition to its expression in the blubber and bone marrow, in common with other animals. We propose a role for leptin in seal pulmonary surfactant production, in addition to its likely role in long-term energy balance. We identify substitutions in the phocine leptin sequence in regions normally highly conserved between widely distinct vertebrate groups, and, using a purified seal leptin antiserum, we confirm the presence of the leptin protein in gray seal lung and serum fractions. Finally, we report the substantial inadequacies of using heterologous antibodies to measure leptin in unextracted gray seal serum.

Rice-Infecting Pseudomonas Genomes Are Highly Accessorized and Harbor Multiple Putative Virulence Mechanisms to Cause Sheath Brown Rot

Sheath rot complex and seed discoloration in rice involve a number of pathogenic bacteria that cannot be associated with distinctive symptoms. These pathogens can easily travel on asymptomatic seeds and therefore represent a threat to rice cropping systems. Among the rice-infecting Pseudomonas, P. fuscovaginae has been associated with sheath brown rot disease in several rice growing areas around the world. The appearance of a similar Pseudomonas population, which here we named P. fuscovaginae-like, represents a perfect opportunity to understand common genomic features that can explain the infection mechanism in rice. We showed that the novel population is indeed closely related to P. fuscovaginae. A comparative genomics approach on eight rice-infecting Pseudomonas revealed heterogeneous genomes and a high number of strain-specific genes. The genomes of P. fuscovaginae-like harbor four secretion systems (Type I, II, III, and VI) and other important pathogenicity machinery that could probably facilitate rice colonization. We identified 123 core secreted proteins, most of which have strong signatures of positive selection suggesting functional adaptation. Transcript accumulation of putative pathogenicity-related genes during rice colonization revealed a concerted virulence mechanism. The study suggests that rice-infecting Pseudomonas causing sheath brown rot are intrinsically diverse and maintain a variable set of metabolic capabilities as a potential strategy to occupy a range of environments.

Portland College: Mobile tech boosts student progression

Mobile and video technologies are being used to boost the confidence and employability of students with disabilities at Portland College - an independent specialist college for students aged 16 to 25, it provides educational opportunities and fosters independent living skills for students with physical or learning disabilities.

Put-in-Bay Harbor

This photograph shows Put-in-Bay Harbor with Gibraltar Island across the bay in the background. This image was made from a stereoview card created by A. C. Platt in the 1880s. South Bass Island was a popular destination in the 1880s for residents of Toledo, Cleveland, and Detroit.

East Harbor State Park

East Harbor State Park attracted huge crowds on warm summer weekends, as this 1950s lineup of vehicles attests. Automobile travel expanded quickly in the 1950s as the economy grew and roads improved. The cities that provided the region with many of its visitors, like Cleveland, Detroit, and Toledo were at their peak in the 1950s and 1960s.