Temporal analysis of the reduction in gas emission in areas of mechanically-harvested sugarcane using satellite imagery

The primary objective of this study was to estimate the amount of gas not emitted into the air in areas cultivated with sugarcane (Saccharum officinarum) that were mechanically harvested. Satellite images CBERS-2/CCD, from 08-13-2004, 08-14-2005, 08-15-2006 and 08-16-2007, of northwestern São Paulo State were processed using the Geographic Information System (GIS)-IDRISI 15.0. Areas of interest (the mechanically-harvested sugarcane fields) were identified and quantified based on the spectral response of the bands studied. Based on these data, the amount of gas that was not emitted was evaluated, according to the estimate equation proposed by the Intergovernmental Panel on Climate Change (IPCC). The results of 396.65 km(2) (5.91% for 2004); 447.56 km(2) (6.67% for 2005); 511.54 km(2) (7.62% in 2006); and 474.60 km(2) (7.07% for 2007), calculated from a total area of 6,710.89 km(2) with sugarcane, showed a significant increase of mechanical harvesting in the study area and a reduction of gas emissions of more than 300,000 t yr(-1).

Terrain forms and spatial variability of soil properties in an area cultivatedwith citrus

A técnica de agricultura de precisão e a relação solo-paisagem permitem delimitar áreas para o manejo localizado, o que permite a aplicação localizada de insumos agrícolas e, consequentemente, pode contribuir para a preservação de recursos naturais. Portanto, o objetivo deste trabalho foi caracterizar a variabilidade espacial das propriedades químicas e do teor de argila, no contexto da relação solo-paisagem, em um Latossolo sob cultivo de citros. Amostras de solo foram coletadas na profundidade de 0,0-0,2 m, em uma área de 83,5 ha cultivada com citros, na forma de malha, com intervalos regulares de 50 m, com 129 pontos na forma de relevo côncava e 206 pontos na forma plana, totalizando 335 pontos. Os valores obtidos para as variáveis que expressam as propriedades químicas e para o teor de argila do solo foram submetidos à análise estatística descritiva e geoestatística com a modelagem de semivariogramas para a confecção de mapas de krigagem. Os valores de alcance e mapas de krigagem indicaram maiores variabilidades na forma de relevo côncava (segmento topo), quando comparada com a forma plana (segmentos meia encosta e encosta inferior). A identificação de diferentes formas de relevo mostrou-se eficiente no entendimento da variabilidade espacial das propriedades químicas e do teor de argila do solo sob cultivo de citros.

Influência do florescimento e grau de isoporização na qualidade de variedades de cana-de-açúcar aptas á industrialização no meio de safra

Among the sugar cane potential uses include those related to the extraction of products and byproducts from the stalk. The sugarcane flowering causes morphological and physiological changes in plant and in the presence of pith, promotes changes in the stalk, reducing the raw matter quality. Most of the areas planted with sugarcane in the South-Central region of Brazil are subject to flowering, however, this feature varies depending on the variety used. There are different pith diameters related to the flowered or induced stalks, and damage to the raw matter quality are still controversial. The objective of this experiment was to evaluate the response of cane sugar varieties in relation to the flowering, pith and chemical and technological parameters, and their relationship with the pith degree. The experimental design was a completely randomized with sis treatments (varieties: IAC91-1099-4004IAC94, IAC95-5000, SP81-3250, CTC and RB855536 15) and three replications. Were evaluated the flowering, based on morphological changes in the apical bud, the pith intensity by the percentage determination of internodes occupied by whitish and spongy tissues and and pith diameter, by measuring the diameters of the changes in the internodes, expressed in percentage, in addition to chemical (juice total acidity) and technological (fiber, reducing sugars and sugar cane Pol) parameters. The flowering occurrences were accompanied by higher pith intensity. The flowering induction contributed to the lower raw matter quality, although the pith volume was lower. The pith and flowering did not affected the sugarcane sucrose content. Increases in levels of fiber, sugars and acidity were observed only in cases where the diameter of the area spongeous exceeded 50% of stalk diameter. The variety that had the best and worse response was RB855536 and CTC 15, respectively.

Structural characteristics and forage mass of Tifton 85 pastures managed under three post-grazing residual leaf areas

The experiment was carried out on Cynodon spp cv. Tifton 85 pastures grazed by sheep under rotational stocking, with the objective of evaluating the structural characteristics as well as the forage mass of the pastures subjected to three grazing intensities in successive cycles. Treatments were composed of three residual leaf area indices (rLAI; 2.4; 1.6 and 0.8), allocated in completely randomized blocks with seven replications, totaling 21 experimental units. Tiller population density, pasture height, leaf area index, forage morphological composition and pasture forage mass were evaluated. The rLAI modified the tiller population density, which increased linearly with decrease in the rLAI of the pastures. Dry masses of leaf blade, stem and dead material were inferior when the rLAI imposed were lower, which resulted in differentiated forage production among the treatments. Tifton 85 pastures grazed by sheep in rotational stocking under tropical conditions with different rLAI show a modified sward structure over successive grazing cycles, mainly by alteration in the height and LAI of the plants at pre-grazing and by light interception post-grazing, which change the tiller population density. The residual leaf area index of 1.6 is the most suitable for pasture management for being equivalent to the heights of entrance and exit of animals on and from paddocks of 33 and 19 cm, respectively, which avoid great accumulation of dead material and excessive stem elongation, in addition to ensuring tillering in the sward.

Annual profile of fecal androgen and glucocorticoid levels in free-living male American kestrels from southern mid-latitude areas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

PCJ River Basins' Water Availability Caused by Water Diversion Scenarios to Supply Metropolitan Areas of So Paulo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Analysis of land use and occupancy in permanent preservation areas according to the hydrography of Ribeirão Água Fria - Bofete, SP - Brazil

Os conflitos de uso são determinados pelas ocupações inadequadas do solo, como é o caso de ocupação do solo dentro de áreas de preservação permanente. O presente trabalho teve como objetivos determinar as classes de uso do solo e se há conflitos dentro de áreas de preservação permanente ao longo da rede de drenagem da microbacia do Ribeirão Água Fria, município de Bofete (SP). Situa-se geograficamente entre as coordenadas: 48°09'30 a 48°18'30 de longitude WGr., 22°58'30 a 23°04'30 de latitude sul com uma área de 15.242,84 ha. O mapa de uso do solo foi elaborado por meio da interpretação diretamente na tela do computador de imagem digital de satélite. Nos dados orbitais, a área de estudo está inserida no quadrante A, da imagem TM/Landsat-5, órbita 220, ponto 76, passagem de 8/09/2007. O Sistema de Informação Geográfica empregado foi o Cartalinx. As áreas de conflito da microbacia foram obtidas a partir do cruzamento entre os mapas de uso do solo e de APPs. Os resultados permitiram concluir que mais da metade da área (51,09%) está ocupada por pastagens, reflexo de solos arenosos e de baixa fertilidade. Constatou-se, ainda, que apesar de quase metade da microbacia estar coberta com algum tipo de vegetação (48,78% de mata natural/reflorestamento), possui aproximadamente um terço das áreas de preservação permanente utilizadas inadequadamente por pastagens (88,15%), reflorestamento (10,42%) e solo exposto (1,43%), totalizando 343,07 ha de áreas conflitantes em um total de 993,26 ha de APPs.

Propagação vegetativa da alfavaca-cravo utilizando diferentes tipos de estacas e substratos

A propagação vegetativa é considerada importante ferramenta para o melhoramento de espécies lenhosas e herbáceas e vem sendo amplamente utilizada, visando melhorar e manter variedades de importância econômica e medicinal. Neste contexto utilizou-se estacas de alfavaca-cravo de 15 cm para apicais e 25 cm para as medianas, sendo estas com e sem folhas. As estacas foram plantadas em bandejas de isopor de 72 células, utilizando-se 10 substratos. Após 35 dias, as estacas foram retiradas com cuidado, sendo as partes aéreas e radiculares separadas e acondicionadas em saco de papel e mantidas em estufa a 70ºC por 48 h para posterior avaliação da matéria seca. Analisou-se a percentagem de enraizamento, número de folhas na estaca, peso de matéria seca de folha e de raiz. Não houve interação significativa entre os diferentes tipos de substrato e estaca para percentagem de enraizamento, sendo que os substratos de modo geral diferiram pouco entre si. Entre os tipos de estaca destacaram-se para esta variável a mediana sem folha e a apical com folha. Para as demais variáveis houve interação significativa entre o tipo de estaca e o substrato. A melhor estaca foi a mediana sem folhas plantadas em substrato arisco + esterco + húmus e vermiculita nas seguintes proporções: 20%:40%:40%; 40%:20%:40% e 40%:40%.

Can Eucalyptus invade native forest fragments close to commercial stands?

Some Eucalyptus species are widely used as a plantation crop in tropical and subtropical regions. One reason for this is the diversity of end uses, but the main reason is the high level of wood production obtained from commercial plantings. With the advancement of biotechnology it will be possible to expand the geographical area in which eucalypts can be used as commercial plantation crops, especially in regions with current climatic restrictions. Despite the popularity of eucalypts and their increasing range, questions still exist, in both traditional planting areas and in the new regions: Can eucalypts invade areas of native vegetation, causing damage to natural ecosystems biodiversity?The objective of this study it was to assess whether eucalypts can invade native vegetation fragments in proximity to commercial stands, and what factors promote this invasive growth. Thus, three experiments were established in forest fragments located in three different regions of Brazil. Each experiment was composed of 40 plots (1 m(2) each one), 20 plots located at the border between the forest fragment and eucalypts plantation, and 20 plots in the interior of the forest fragments. In each experimental site, the plots were paired by two soil exposure conditions, 10 plots in natural conditions and 10 plots with soil exposure (no plant and no litter). During the rainy season, 2 g of eucalypts seeds were sown in each plot, including Eucalyptus grandis or a hybrid of E. urophylla x E. grandis, the most common commercial eucalypt species planted in the three region. At 15, 30, 45, 90, 180, 270 and 360 days after sowing, we assessed the number of seedlings of eucalypts and the number of seedlings of native species resulting from natural regeneration. Fifteen days after sowing, the greatest number of eucalypts seedlings (37 m(-2)) was observed in the plots with lower luminosity and exposed soil. Also, for native species, it was observed that exposed soil improved natural germination reaching the highest number of 163 seedlings per square meter. Site and soil exposure were the factors that have the greatest influence on seed germination of both eucalypt and native species. However, 270 days after sowing, eucalypt seedlings were not observed at any of the three experimental sites. The result shows the inability of eucalypts to adapt to condition outside of their natural range. However, native species demonstrated their strong capacity for natural regeneration in forest fragments under the same conditions where eucalypts were seeded. (C) 2011 Elsevier B.V. All rights reserved.

Prevalence of Lettuce mosaic virus - common strain on three lettuce producing areas from São Paulo State

O LMV ocorre em todo o mundo e é considerado um dos patógenos mais importantes para a cultura da alface. de acordo com a habilidade em contornar os genes de resistência mo1¹ e mo1² encontrados em alface, os isolados de LMV podem ser dividos em dois sub-grupos: LMV-Most, capazes de contornar a resistência propiciada por estes genes e de serem transmitidos pela semente nestas cutivares, e LMV-Common, que não são capazes de causar sintomas nestes cultivares, além de serem transmitidos pela semente somente em cultivares suscetíveis. Para avaliar a ocorrência destes dois tipos de isolados de LMV foram coletadas, durante 2002-2005, amostras de alface com sintomas de mosaico em áreas de produção de alface comercial das regiões de Campinas, Mogi das Cruzes e Bauru no estado de São Paulo. O RNA total foi utilizado para detecção por RT-PCR utilizando-se oligonucleotídeos universais para LMV que amplificam a porção N-terminal variável da capa protéica, localizada no terminal 3´do genoma. As amostras positivas foram analisadas por um segundo primer que amplifica um fragmento da região central (CI-VPg) do genoma viral. Um total de 1362 amostras foram avaliadas, tendo sido detectado o LMV em 504 amostras (37,29%). O LMV-Common prevaleceu em variedades suscetíveis (77,3%). O LMV-Most foi encontrado frequentemente associado a variedades portadoras do gene de tolerância mo1¹. Apesar da existência dos LMV-Most capazes de contornar a resistência em alface, estes não predominam em nossa condições.

Lodo de esgoto na recuperação de áreas degradadas: efeito nas características físicas do solo

A recuperação de áreas degradadas é um processo lento e requer a adição de resíduos orgânicos como condicionador das propriedades físicas do solo. O lodo de esgoto apresenta elevados teores de matéria orgânica (MO) e nutrientes e, portanto, tem alto potencial para utilização nessas áreas. O objetivo deste trabalho foi verificar o efeito da adição de lodo de esgoto na recuperação das características físicas de um solo degradado (Neossolo Quartzarênico) plantado com espécies nativas da Mata Atlântica, na Fazenda Entre-Rios, pertencente à Cia. Suzano Bahia Sul de Papel e Celulose, na região de Itatinga-SP. O experimento foi conduzido em blocos casualizados com quatro repetições. Os tratamentos foram constituídos por seis doses de lodo de esgoto (0, 2,5, 5, 10, 15 e 20 t ha-1), mais um que recebeu a adubação química. A aplicação de lodo de esgoto, para recuperação de áreas degradadas, aumentou os agregados do solo conforme o aumento das doses de lodo, até 12 meses após sua aplicação. As porosidades (macro, micro e total) do solo foram aumentadas com as maiores doses de lodo de esgoto até seis meses após sua aplicação; apenas a microporosidade foi aumentada até 12 meses após a aplicação. Houve aumento da umidade do solo em função do aumento das doses de lodo no solo até seis meses após a aplicação.

Object-Space Road Extraction in Rural Areas Using Stereoscopic Aerial Images

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Método monoscópico para a determinação automática da altura de edifícios em fotografias aéreas

This paper proposes a monoscopic method for automatic determination of building's heights in digital photographs areas, based on radial displacement of points in the plan image and geometry at the time the photo is obtained. Determination of the buildings' heights can be used to model the surface in urban areas, urban planning and management, among others. The proposed methodology employs a set of steps to detect arranged radially from the system of photogrammetric coordinates, which characterizes the lateral edges of buildings present in the photo. In a first stage is performed the reduction of the searching area through detection of shadows projected by buildings, generating sub-images of the areas around each of the detected shadow. Then, for each sub-image, the edges are automatically extracted, and tests of consistency are applied for it in order to be characterized as segments of straight arranged radially. Next, with the lateral edges selected and the knowledge of the flight height, the buildings' heights can be calculated. The experimental results obtained with real images showed that the proposed approach is suitable to perform the automatic identification of the buildings height in digital images.

Predição de sombras de edifícios sobre vias urbanas com base em modelos digitais de elevações e dados de imagens aéreas de alta resolução

This research presents a methodology for prediction of building shadows cast on urban roads existing on high-resolution aerial imagery. Shadow elements can be used in the modeling of contextual information, whose use has become more and more common in image analysis complex processes. The proposed methodology consists in three sequential steps. First, the building roof contours are manually extracted from an intensity image generated by the transformation of a digital elevation model (DEM) obtained from airborne laser scanning data. In similarly, the roadside contours are extracted, now from the radiometric information of the laser scanning data. Second, the roof contour polygons are projected onto the adjacent roads by using the parallel projection straight lines, whose directions are computed from the solar ephemeris, which depends on the aerial image acquisition time. Finally, parts of shadow polygons that are free from building perspective obstructions are determined, given rise to new shadow polygons. The results obtained in the experimental evaluation of the methodology showed that the method works properly, since it allowed the prediction of shadow in high-resolution imagery with high accuracy and reliability.

Extração semi-automática de rodovia baseada em um par estéreo de imagens aéreas e em otimização por programação dinâmica no espaço-objeto

This article proposes a method for 3D road extraction from a stereopair of aerial images. The dynamic programming (DP) algorithm is used to carry out the optimization process in the object-space, instead of usually doing it in the image-space such as the DP traditional methodologies. This means that road centerlines are directly traced in the object-space, implying that a mathematical relationship is necessary to connect road points in object and image-space. This allows the integration of radiometric information from images into the associate mathematical road model. As the approach depends on an initial approximation of each road, it is necessary a few seed points to coarsely describe the road. Usually, the proposed method allows good results to be obtained, but large anomalies along the road can disturb its performance. Therefore, the method can be used for practical application, although it is expected some kind of local manual edition of the extracted road centerline.