Multiscale coupling and multiphysics approaches in earth sciences : applications

Geoscientists are confronted with the challenge of assessing nonlinear phenomena that result from multiphysics coupling across multiple scales from the quantum level to the scale of the earth and from femtoseconds to the 4.5 Ga of history of our planet. We neglect in this review electromagnetic modelling of the processes in the Earth’s core, and focus on four types of couplings that underpin fundamental instabilities in the Earth. These are thermal (T), hydraulic (H), mechanical (M) and chemical (C) processes which are driven and controlled by the transfer of heat to the Earth’s surface. Instabilities appear as faults, folds, compaction bands, shear/fault zones, plate boundaries and convective patterns. Convective patterns emerge from buoyancy overcoming viscous drag at a critical Rayleigh number. All other processes emerge from non-conservative thermodynamic forces with a critical critical dissipative source term, which can be characterised by the modified Gruntfest number Gr. These dissipative processes reach a quasi-steady state when, at maximum dissipation, THMC diffusion (Fourier, Darcy, Biot, Fick) balance the source term. The emerging steady state dissipative patterns are defined by the respective diffusion length scales. These length scales provide a fundamental thermodynamic yardstick for measuring instabilities in the Earth. The implementation of a fully coupled THMC multiscale theoretical framework into an applied workflow is still in its early stages. This is largely owing to the four fundamentally different lengths of the THMC diffusion yardsticks spanning micro-metre to tens of kilometres compounded by the additional necessity to consider microstructure information in the formulation of enriched continua for THMC feedback simulations (i.e., micro-structure enriched continuum formulation). Another challenge is to consider the important factor time which implies that the geomaterial often is very far away from initial yield and flowing on a time scale that cannot be accessed in the laboratory. This leads to the requirement of adopting a thermodynamic framework in conjunction with flow theories of plasticity. This framework allows, unlike consistency plasticity, the description of both solid mechanical and fluid dynamic instabilities. In the applications we show the similarity of THMC feedback patterns across scales such as brittle and ductile folds and faults. A particular interesting case is discussed in detail, where out of the fluid dynamic solution, ductile compaction bands appear which are akin and can be confused with their brittle siblings. The main difference is that they require the factor time and also a much lower driving forces to emerge. These low stress solutions cannot be obtained on short laboratory time scales and they are therefore much more likely to appear in nature than in the laboratory. We finish with a multiscale description of a seminal structure in the Swiss Alps, the Glarus thrust, which puzzled geologists for more than 100 years. Along the Glarus thrust, a km-scale package of rocks (nappe) has been pushed 40 km over its footwall as a solid rock body. The thrust itself is a m-wide ductile shear zone, while in turn the centre of the thrust shows a mm-cm wide central slip zone experiencing periodic extreme deformation akin to a stick-slip event. The m-wide creeping zone is consistent with the THM feedback length scale of solid mechanics, while the ultralocalised central slip zones is most likely a fluid dynamic instability.

Impacts of climatic factors on evolution of molecular diversity and the natural distribution of wild stocks of the giant freshwater prawn (Macrobrachium rosenbergii)

Natural distributions of most freshwater taxa are restricted geographically, a pattern that reflects dispersal limitation. Macrobrachium rosenbergii is unusual because it occurs naturally in rivers from near Pakistan in the west, across India and Bangladesh to the Malay Peninsula, and across the Sunda Shelf and Indonesian archipelago to western Java. Individuals cannot tolerate full marine conditions, so dispersal between river drainage basins must occur at limited geographical scales when ecological or climatic factors are favorable. We examined molecular diversity in wild populations of M. rosenbergii across its complete natural range to document patterns of diversity and to relate them to factors that have driven evolution of diversity in this species. We found 3 clades in the mitochondrial deoxyribonucleic acid (mtDNA) data set that corresponded geographically with eastern, central, and western sets of haplotypes that last shared a common ancestor 1 × 106 y ago. The eastern clade was closest to the common ancestor of all 3 clades and to the common ancestor with its congener, Macrobrachium spinipes, distributed east of Huxley's Line. Macrobrachium rosenbergii could have evolved in the western Indonesian archipelago and spread westward during the early to mid-Pleistocene to India and Sri Lanka. Additional groups identified in the nuclear DNA data set in the central and western clades probably indicate secondary contact via dispersal between regions and modern introductions that have mixed nuclear and mtDNA genes. Pleistocene sea-level fluctuations can explain dispersal across the Indonesian archipelago and parts of mainland southeastern Asia via changing river drainage connections in shallow seas on wide continental shelves. At the western end of the modern distribution where continental shelves are smaller, intermittent freshwater plumes from large rivers probably permitted larval dispersal across inshore areas of lowered salinity.

Psychosocial factors associated with controlling feeding practices of Indian and Australian-Indian mothers

This cross-sectional study examined the association between psychosocial factors (mothers’ perception of own and child weight, maternal self-efficacy in feeding and involvement of the mother-in-law in child-feeding) and controlling feeding practices (monitoring, restriction, pressure to eat and passive feeding). Participants were 531 affluent-Indian mothers in Australia and Mumbai with children aged 1-5 years. The psychosocial variables and feeding practices were measured using a combination of previously validated scales and study-developed items/scales. Multivariable regression analyses were stratified by sample (Australia and Mumbai) to investigate psychosocial factors related to the feeding practices, adjusting for covariates. Self-efficacy in feeding was associated with each of the feeding practices in at least one of the samples (β values between 0.1-0.2, p= 0.04-0.005). The greater involvement of the mother-in-law in child-feeding was related to the higher use of restriction in both samples (β values ≥0.2, p=0.02). In contrast, maternal weight perceptions were not consistently associated with feeding practices in either sample. The findings highlighted that unique (self-efficacy in feeding) and culturally-specific (involvement of the mother-in-law) variables not extensively researched within the context of child-feeding were important factors associated with Indian mothers’ feeding practices. Greater consideration of these factors may be required when tailoring child-feeding interventions for Indian mothers.

An approach for adaptive and integrated environmental planning to deal with uncertainty in a Great Barrier Reef Catchment

This paper presents the Mossman Mill District Practices Framework. It was developed in the Wet Tropics region within the Great Barrier Reef in north-eastern Australia to describe the environmental benefits of agricultural management practices for the sugar cane industry. The framework translates complex, unclear and overlapping environmental plans, policy and legal arrangements into a simple framework of management practices that landholders can use to improve their management actions. Practices range from those that are old or outdated through to aspirational practices that have the potential to achieve desired resource condition targets. The framework has been applied by stakeholders at multiple scales to better coordinate and integrate a range of policy arrangements to improve natural resource management. It has been used to structure monitoring and evaluation in order to underpin a more adaptive approach to planning at mill district and property scale. Potentially, the framework and approach can be applied across fields of planning where adaptive management is needed. It has the potential to overcome many of the criticisms of property-scale and regional Natural Resource Management.

A method for risk analysis across governance systems : a great barrier reef case study

Healthy governance systems are key to delivering sound environmental management outcomes from global to local scales. There are, however, surprisingly few risk assessment methods that can pinpoint those domains and sub-domains within governance systems that are most likely to influence good environmental outcomes at any particular scale, or those if absent or dysfunctional, most likely to prevent effective environmental management. This paper proposes a new risk assessment method for analysing governance systems. This method is then tested through its preliminary application to a significant real-world context: governance as it relates to the health of Australia's Great Barrier Reef (GBR). The GBR exists at a supra-regional scale along most of the north eastern coast of Australia. Brodie et al (2012 Mar. Pollut. Bull. 65 81-100) have recently reviewed the state and trend of the health of the GBR, finding that overall trends remain of significant concern. At the same time, official international concern over the governance of the reef has recently been signalled globally by the International Union for the Conservation of Nature (IUCN). These environmental and political contexts make the GBR an ideal candidate for use in testing and reviewing the application of improved tools for governance risk assessment. © 2013 IOP Publishing Ltd.

Viewpoint : social and economic dimensions of involving savanna communities in carbon management systems

In this paper we discuss the social, economic and institutional aspects of the development of carbon management systems within Australia's tropical savannas. Land-use values in savanna landscapes are changing as a result of changing economic markets, greater recognition of native title, and growing social demands and expectations for tourism, recreation and conservation. In addition, there is increasing interest in developing markets and policy arrangements for greenhouse gas abatement, carbon sequestration and carbon trade in savannas. We argue that for carbon management to lead to national greenhouse outcomes, attention must be paid to social, economic and institutional issues in environmental planning and policy arrangements. From an economic perspective, the financial impact of carbon management on savanna enterprises will depend on appropriate and available policy mechanisms, unit price for carbon, landscape condition, existing management strategies and abatement measurements used. Local social and cultural features of communities and regions may enhance or constrain the implementation of carbon abatement strategies, depending on how they are perceived. In terms of institutional arrangements, policies and plans must support and enable carbon management. We identify three areas that require priority investigation and adjustment: regional planning arrangements, property rights, and rules for accounting at enterprise and regional scales. We conclude that the best potential for managing for carbon will be achieved while managing for range of other natural resource management outcomes, especially where managing for carbon delivers collateral benefits to enterprises.

Biophilic urbanism : harnessing natural elements to enhance the performance of constructed assets

Creating climate resilient, low-carbon urban environments and assets is a policy goal of many governments and city planners today, and an important issue for constructed asset owners. Stakeholders and decision makers in urban environments are also responding to growing evidence that cities need to increase their densities to reduce their footprint in the face of growing urban populations. Meanwhile, research is highlighting the importance of balancing such density with urban nature, to provide a range of health and wellbeing benefits to residents as well as to mitigate the environmental and economic impacts of heavily built up, impervious urban areas. Concurrently achieving this suite of objectives requires the coordination and cooperation of multiple stakeholder groups, with urban development and investment increasingly involving many private and public actors. Strategies are needed that can provide ‘win-win’ outcomes to benefit these multiple stakeholders, and provide immediate benefits while also addressing the emerging challenges of climate change, resource shortages and urban population growth. Within this context, ‘biophilic urbanism’ is emerging as an important design principle for buildings and urban areas. Through the use of a suite of natural design elements, biophilic urbanism has the potential to address multiple pressures related to climate change, increasing urban populations, finite resources and human’s inherent need for contact with nature. The principle directs the creation of urban environments that are conducive to life, delivering a range of benefits to stakeholders including building owners, occupiers and the surrounding community. This paper introduces the principle of biophilic urbanism and discusses opportunities for improved building occupant experience and performance of constructed assets, as well as addressing other sustainability objectives including climate change mitigation and adaptation. The paper presents an emerging process for considering biophilic design opportunities at different scales and highlights implications for the built environment industry. This process draws on findings of a study of leading cities internationally and learnings related to economic and policy considerations. This included literature review, two stakeholder workshops, and extensive industry consultation, funded by the Sustainable Built Environment National Research Centre through core project partners Western Australian Department of Finance, Parsons Brinckerhoff, Townsville City Council CitySolar Program, Green Roofs Australasia, and PlantUp.

Pore size distribution and accessible pore size distribution in bituminous coals

The porosity and pore size distribution of coals determine many of their properties, from gas release to their behavior on carbonization, and yet most methods of determining pore size distribution can only examine a restricted size range. Even then, only accessible pores can be investigated with these methods. Small-angle neutron scattering (SANS) and ultra small-angle neutron scattering (USANS) are increasingly used to characterize the size distribution of all of the pores non-destructively. Here we have used USANS/SANS to examine 24 well-characterized bituminous and subbituminous coals: three from the eastern US, two from Poland, one from New Zealand and the rest from the Sydney and Bowen Basins in Eastern Australia, and determined the relationships of the scattering intensity corresponding to different pore sizes with other coal properties. The range of pore radii examinable with these techniques is 2.5nm to 7μm. We confirm that there is a wide range of pore sizes in coal. The pore size distribution was found to be strongly affected by both rank and type (expressed as either hydrogen or vitrinite content) in the size range 250nm to 7μm and 5 to 10nm, but weakly in intermediate regions. The results suggest that different mechanisms control coal porosity on different scales. Contrast-matching USANS and SANS were also used to determine the size distribution of the fraction of the pores in these coals that are inaccessible to deuterated methane, CD4, at ambient temperature. In some coals most of the small (~10nm) pores were found to be inaccessible to CD4 on the time scale of the measurement (~30min–16h). This inaccessibility suggests that in these coals a considerable fraction of inherent methane may be trapped for extended periods of time, thus reducing the effectiveness of methane release from (or sorption by) these coals. Although the number of small pores was less in higher rank coals, the fraction of total pores that was inaccessible was not rank dependent. In the Australian coals, at the 10nm to 50nm size scales the pores in inertinites appeared to be completely accessible to CD4, whereas the pores in the vitrinite were about 75% inaccessible. Unlike the results for total porosity that showed no regional effects on relationships between porosity and coal properties, clear regional differences in the relationships between fraction of closed porosity and coal properties were found. The 10 to 50nm-sized pores of inertinites of the US and Polish coals examined appeared less accessible to methane than those of the inertinites of Australian coals. This difference in pore accessibility in inertinites may explain why empirical relationships between fluidity and coking properties developed using Carboniferous coals do not apply to Australian coals.

Two-scale computational modelling of unsaturated flow in soils exhibiting small scale heterogeneities

Unsaturated water flow in soil is commonly modelled using Richards’ equation, which requires the hydraulic properties of the soil (e.g., porosity, hydraulic conductivity, etc.) to be characterised. Naturally occurring soils, however, are heterogeneous in nature, that is, they are composed of a number of interwoven homogeneous soils each with their own set of hydraulic properties. When the length scale of these soil heterogeneities is small, numerical solution of Richards’ equation is computationally impractical due to the immense effort and refinement required to mesh the actual heterogeneous geometry. A classic way forward is to use a macroscopic model, where the heterogeneous medium is replaced with a fictitious homogeneous medium, which attempts to give the average flow behaviour at the macroscopic scale (i.e., at a scale much larger than the scale of the heterogeneities). Using the homogenisation theory, a macroscopic equation can be derived that takes the form of Richards’ equation with effective parameters. A disadvantage of the macroscopic approach, however, is that it fails in cases when the assumption of local equilibrium does not hold. This limitation has seen the introduction of two-scale models that include at each point in the macroscopic domain an additional flow equation at the scale of the heterogeneities (microscopic scale). This report outlines a well-known two-scale model and contributes to the literature a number of important advances in its numerical implementation. These include the use of an unstructured control volume finite element method and image-based meshing techniques, that allow for irregular micro-scale geometries to be treated, and the use of an exponential time integration scheme that permits both scales to be resolved simultaneously in a completely coupled manner. Numerical comparisons against a classical macroscopic model confirm that only the two-scale model correctly captures the important features of the flow for a range of parameter values.

Development of descriptor tools for the characterisation of Australian sugar mill evaporator scale

Cleaning of sugar mill evaporators is an expensive exercise. Identifying the scale components assists in determining which chemical cleaning agents would result in effective evaporator cleaning. The current methods (based on x-ray diffraction techniques, ion exchange/high performance liquid chromatography and thermogravimetry/differential thermal analysis) used for scale characterisation are difficult, time consuming and expensive, and cannot be performed in a conventional analytical laboratory or by mill staff. The present study has examined the use of simple descriptor tests for the characterisation of Australian sugar mill evaporator scales. Scale samples were obtained from seven Australian sugar mill evaporators by mechanical means. The appearance, texture and colour of the scale were noted before the samples were characterised using x-ray fluorescence and x-ray powder diffraction to determine the compounds present. A number of commercial analytical test kits were used to determine the phosphate and calcium contents of scale samples. Dissolution experiments were carried out on the scale samples with selected cleaning agents to provide relevant information about the effect the cleaning agents have on different evaporator scales. Results have shown that by simply identifying the colour and the appearance of the scale, the elemental composition and knowing from which effect the scale originates, a prediction of the scale composition can be made. These descriptors and dissolution experiments on scale samples can be used to provide factory staff with an on-site rapid process to predict the most effective chemicals for chemical cleaning of the evaporators.

Correlates of female sexual functioning : adult attachment and differentiation of self

Introduction Female sexual functioning is affected by a range of factors including motivation, psychological well-being, and relationship issues. In understanding female sexual dysfunction (FSD), there has been a tendency to privilege diagnostic and medical over relationship issues. Aim To investigate the association between women’s experience of intimacy in close relationships - operationalized in terms of attachment and degree of differentiation of self - and FSD. Methods Two hundred and thirty sexually active Australian women responded to an invitation to complete a set of validated scales to assess potential correlates of sexual functioning. Main Outcome Measures The Female Sexuality Function Index, the Experiences in Close Relationships Scale, the Differentiation of Self Inventory, as well as a set of study-specific questions were subject to hierarchical multiple regression analyses Results Relational variables of attachment avoidance and to a lesser degree, attachment anxiety were associated with FSD. Participants with lower levels of differentiation of self were more likely to report sexual difficulties. The inability to maintain a sense of self in the presence of intimate others was the strongest predictors of sexual problems. A history of sexual abuse in adulthood and higher levels of psychological distress were also associated with sexual difficulties. Conclusions The findings provide support for a relational understanding of female sexual functioning. Attachment avoidance, attachment anxiety, and degree of differentiation of self are shown to be associated with sexual difficulties. The findings support the need to focus on relational and psychological factors in women’s experience of sex.

Measurement of general and specific approaches to physical activity parenting : a systematic review

Background Parents play a significant role in shaping youth physical activity (PA). However, interventions targeting PA parenting have been ineffective. Methodological inconsistencies related to the measurement of parental influences may be a contributing factor. The purpose of this article is to review the extant peer-reviewed literature related to the measurement of general and specific parental influences on youth PA. Methods A systematic review of studies measuring constructs of PA parenting was conducted. Computerized searches were completed using PubMed, MEDLINE, Academic Search Premier, SPORTDiscus, and PsycINFO. Reference lists of the identified articles were manually reviewed as well as the authors' personal collections. Articles were selected on the basis of strict inclusion criteria and details regarding the measurement protocols were extracted. A total of 117 articles met the inclusionary criteria. Methodological articles that evaluated the validity and reliability of PA parenting measures (n=10) were reviewed separately from parental influence articles (n=107). Results A significant percentage of studies used measures with indeterminate validity and reliability. A significant percentage of articles did not provide sample items, describe the response format, or report the possible range of scores. No studies were located that evaluated sensitivity to change. Conclusion The reporting of measurement properties and the use of valid and reliable measurement scales need to be improved considerably.

Physical activity recognition from accelerometer data using a multi-scale ensemble method

Accurate and detailed measurement of an individual's physical activity is a key requirement for helping researchers understand the relationship between physical activity and health. Accelerometers have become the method of choice for measuring physical activity due to their small size, low cost, convenience and their ability to provide objective information about physical activity. However, interpreting accelerometer data once it has been collected can be challenging. In this work, we applied machine learning algorithms to the task of physical activity recognition from triaxial accelerometer data. We employed a simple but effective approach of dividing the accelerometer data into short non-overlapping windows, converting each window into a feature vector, and treating each feature vector as an i.i.d training instance for a supervised learning algorithm. In addition, we improved on this simple approach with a multi-scale ensemble method that did not need to commit to a single window size and was able to leverage the fact that physical activities produced time series with repetitive patterns and discriminative features for physical activity occurred at different temporal scales.

Depression and belongingness in general and workplace contexts : a cross-lagged longitudinal investigation

Belongingness has been linked to depression. Prior studies have been cross-sectional with few addressing distinct belongingness contexts. This study used structural equation modelling to investigate cross-lagged longitudinal relationships between general belonging, workplace belonging and depressive symptoms in a community sample of 221 working adults measured at two time points three months apart. Measures were: Sense of Belonging Instrument-Psychological (SOBI-P); Psychological Sense of Organizational Membership (PSOM); Depression Anxiety Stress Scales (DASS-21); Kessler Psychological Distress Scale (K10). General belonging was predicted more strongly by depressive symptoms than by baseline general belonging, suggesting that depressive symptoms not only linger but also influence future belongingness cognitions. Neither general nor workplace belonging longitudinally predicted depressive symptoms, however cross-sectional correlations were substantial. The concurrent path between general belongingness and depressive symptoms was strong. Results are consistent with daily process studies suggesting that reduced belongingness precipitates a rapid increase in depressive symptoms which influence longer term belongingness cognitions. Congruent with interpersonal descriptions of depression such as the social-cognitive interpersonal process model, results further suggest that belongingness cognitions are the proximal antecedent of a depressive response. Practitioners should monitor both a general sense of belonging as well as perceived relational value cues in specific contexts.

Validation of the dietetic confidence scale

Dietitians have reported a lack of confidence in counselling clients with mental health issues. Standardised tools are needed to evaluate programs aiming to improve confidence. The Dietetic Confidence Scale (DCS) was developed to assess dietitians’perception of their capability about working with clients experiencing depression. Exploratory research revealed a 13-item, two-factor model. Dietetic confidence was associated with: 1) Confidence using the Nutrition Care Process; and 2) Confidence in Advocacy for Self-care and Client-care. This study aimed to validate the DCS using this two-factor model.The DCS was administered to 458 dietitians. Confirmatory factor analysis (CFA) assessed the scale’s psychometric validity. Reliability was measured using Cronbach’s alpha (α) co-efficient. CFA results supported the hypothesised two-factor, 13-item model. The Good Fit Index (GFI = 0.95) indicated a strong fit. Item-factor correlations ranged from r = 0.50 to 0.89. The overall scale and subscales showed good reliability (α = 0.93 to 0.76). This is the first study to validate an instrument that measures dietetic confidence about working with clients experiencing depression. The DCS can be used to measure changes in perceived confidence and identify where further training, mentoring or experience is needed. The findings also suggest that initiatives aimed at building dietitians' confidence about working with clients experiencing depression, should focus on improving client-focused nutrition care, foster advocacy, reflective practice, mentoring and encourage professional support networks. Avenues for future research include further validity and reliability testing to expand the generalisability of results; and modifying the scale for other disease or client populations.