Help needed in medication self-management for people with visual impairment: case-control study

Background: Visual impairment (VI) is rising in prevalence and contributing to increasing morbidity, particularly among older people. Understanding patients' problems is fundamental to achieving optimal health outcomes but little is known about how VI impacts on self-management of medication.

Aim: To compare issues relating to medication self-management between older people with and without VI.

Design and setting: Case-control study with participants aged =65 years, prescribed at least two long-term oral medications daily, living within the community.

Method: The study recruited 156 patients with VI (best corrected visual acuity [BCVA] 6/18 to 3/60) at low-vision clinics; community optometrists identified 158 controls (BCVA 6/9 or better). Researchers visited participants in their homes, administered two validated questionnaires to assess medication adherence (Morisky; Medication Adherence Report Scale [MARS]), and asked questions about medication self-management, beliefs, and support.

Results: Approximately half of the participants in both groups reported perfect adherence on both questionnaires (52.5% Morisky; 43.3%, MARS). Despite using optical aids, few (3%) with VI could read medication information clearly; 24% had difficulty distinguishing different tablets. More people with VI (29%) than controls (13%) (odds ratio [OR] = 2.8; 95% confidence interval [CI] = 1.6 to 5.0) needed help managing their medication, from friends (19% versus 10%) or pharmacists (10% versus 2.5%; OR = 4.4, 95% CI = 1.4 to 13.5); more received social service support (OR = 7.1; 95% CI = 3.9 to 12.9).

Conclusion: Compared to their peers without VI, older people with VI are more than twice as likely to need help in managing medication. In clinical practice in primary care, patients' needs for practical support in taking prescribed treatment must be recognised. Strategies for effective medication self-management should be explored.

Obesity associated severe asthma represents a distinct clinical phenotype - Analysis of the British Thoracic Society Difficult Asthma Registry patient cohort according to body mass index

BACKGROUND: Obesity has emerged as a risk factor for the development of asthma and it may also influence asthma control and airways inflammation. However, the role of obesity in severe asthma remains unclear. OBJECTIVE: To explore the association between obesity (defined by BMI) and severe asthma. METHODS: Data from the National Registry for dedicated UK Difficult Asthma Services were used to compare patient demographics, disease characteristics and healthcare utilisation between three body mass index (BMI) categories (normal weight: 18.5 -24.99, overweight: 25 -29.99, obese: =30) in a well characterised group of severe asthmatic adults. RESULTS: The study population consisted of 666 severe asthmatics with a median BMI of 29.8 (interquartile range 22.5 -34.0). The obese group exhibited greater asthma medication requirements in terms of maintenance corticosteroid therapy (48.9% versus 40.4% and 34.5% in the overweight and normal weight groups, respectively), steroid burst therapy and short-acting ß2-agonist (SABA) use per day. Significant differences were seen with gastro-oesophageal reflux disease (GORD) (53.9% versus 48.1% and 39.7% in the overweight and normal weight groups, respectively) and proton pump inhibitor (PPI) use. Bone density scores were higher in the obese group, whilst pulmonary function testing revealed a reduced FVC and raised Kco. Serum IgE levels decreased with increasing BMI and the obese group were more likely to report eczema, but less likely to have a history of nasal polyps. CONCLUSIONS: Severe asthmatics display particular characteristics according to BMI that support the view that obesity associated severe asthma may represent a distinct clinical phenotype.1Royal Brompton Hospital, London, UK;2Department of Computing, Imperial College, UK3Airways Disease, National Heart & Lung Institute, Imperial College, UK;4Centre for infection and immunity, Queen's University of Belfast, UK;5University of Leicester, UK;6The University of Manchester and University Hospital of South Manchester, UK;7Birmingham Heartlands Hospital, University of Birmingham, UK;8Gartnavel General Hospital, University of Glasgow, UK;9Glasgow Royal Infirmary, Glasgow, UKCorrespondence: Dr Andrew N. Menzies-Gow, Royal Brompton Hospital, Fulham Road, London SW3 6HP.

Breast Cancer Risk in Relation to Occupations with Exposure to Carcinogens and Endocrine Disruptors:a Canadian Case-Control Study

Background

Endocrine disrupting chemicals and carcinogens, some of which may not yet have been classified as such, are present in many occupational environments and could increase breast cancer risk. Prior research has identified associations with breast cancer and work in agricultural and industrial settings. The purpose of this study was to further characterize possible links between breast cancer risk and occupation, particularly in farming and manufacturing, as well as to examine the impacts of early agricultural exposures, and exposure effects that are specific to the endocrine receptor status of tumours.

Methods

1005 breast cancer cases referred by a regional cancer center and 1147 randomly-selected community controls provided detailed data including occupational and reproductive histories. All reported jobs were industry- and occupation-coded for the construction of cumulative exposure metrics representing likely exposure to carcinogens and endocrine disruptors. In a frequency-matched case?control design, exposure effects were estimated using conditional logistic regression.

Results

Across all sectors, women in jobs with potentially high exposures to carcinogens and endocrine disruptors had elevated breast cancer risk (OR = 1.42; 95% CI, 1.18-1.73, for 10 years exposure duration). Specific sectors with elevated risk included: agriculture (OR = 1.36; 95% CI, 1.01-1.82); bars-gambling (OR = 2.28; 95% CI, 0.94-5.53); automotive plastics manufacturing (OR = 2.68; 95% CI, 1.47-4.88), food canning (OR = 2.35; 95% CI, 1.00-5.53), and metalworking (OR = 1.73; 95% CI, 1.02-2.92). Estrogen receptor status of tumors with elevated risk differed by occupational grouping. Premenopausal breast cancer risk was highest for automotive plastics (OR = 4.76; 95% CI, 1.58-14.4) and food canning (OR = 5.70; 95% CI, 1.03-31.5).

Conclusions

These observations support hypotheses linking breast cancer risk and exposures likely to include carcinogens and endocrine disruptors, and demonstrate the value of detailed work histories in environmental and occupational epidemiology.

The two-way relationship between the Balanced Scorecard and Management Control Systems in organizations:Lessons from a Case Study

This paper reports a case study conducted in Quinta da Aveleda, one of
the three largest Portuguese wine companies. Our aim was to explore the
relationship established between a newly implemented Balanced Scorecard
(BSC) and the elements of the Management Control System (MCS) in the
organization. Thus, two specific objectives were pursued. Firstly, to identify
the influences (barriers, opportunities) of the existing MCS on the implementation
of the BSC. Secondly, to identify the impacts the BSC implementation
was able to exert on the configuration of the organization’s MCS.
We found that the budgeting process, the planning system, the information
infrastructure, and the organizational structure and culture were the elements
of the previous MCS that influenced the BSC implementation process.
Eventually, the BSC implementation led to important changes in the budgeting,
planning, reporting systems and processes. In order to explain these
findings, we briefly explored the main issues and factors accounting for the
scope and nature of the BSC’s impacts on Quinta da Aveleda. These issues
and factors were the mobilized organizational resources, the implementation
approach, the communication, and the organizational support.

Effect of intensive glycemic control on levels of markers of inflammation in type 1 diabetes mellitus in the diabetes control and complications trial

Type 1 diabetes mellitus is associated with an increased risk of cardiovascular disease (CVD) that is not fully explained by conventional risk factors. The Diabetes Control and Complications Trial (DCCT) showed that intensive diabetes therapy reduced levels of LDL cholesterol and triglycerides but increased the risk of major weight gain, which might adversely affect CVD risk. The present study examined the effect of intensive therapy on levels of several markers of inflammation that have been linked to risk of CVD.

A Framework for Context-Driven End-to-End QoS Control in Converged Next Generation Networks”

This paper presents a framework for context-driven policy-based QoS control and end-to-end resource management in converged next generation networks. The Converged Networks QoS Framework (CNQF) is being developed within the IU-ATC project, and comprises distributed functional entities whose instances co-ordinate the converged network infrastructure to facilitate scalable and efficient end-to-end QoS management. The CNQF design leverages aspects of TISPAN, IETF and 3GPP policy-based management architectures whilst also introducing important innovative extensions to support context-aware QoS control in converged networks. The framework architecture is presented and its functionalities and operation in specific application scenarios are described.

Buffer Management for Multimedia QoS control over HSDPA Downlink

HSDPA specifications include support for a flexible framework for QoS management. In this paper, it is shown how buffer management could be incorporated into HSDPA QoS framework for 'multimedia' traffic QoS control in the MAC-hs of the Node-B. A time-space-priority (TSP) scheme is proposed as viable buffer management scheme to this effect. Comparative simulation study with other schemes is presented, demonstrating the effectiveness of the TSP buffer management scheme for 'multimedia' service QoS control in HSDPA Node-B data buffers

Multi-Objective Reactive Power Support from Wind farms for Network Performance Enhancement

This paper examines the ability of the doubly fed induction generator (DFIG) to deliver multiple reactive power objectives during variable wind conditions. The reactive power requirement is decomposed based on various control objectives (e.g. power factor control, voltage control, loss minimisation, and flicker mitigation) defined around different time frames (i.e. seconds, minutes, and hourly), and the control reference is generated by aggregating the individual reactive power requirement for each control strategy. A novel coordinated controller is implemented for the rotor-side converter and the grid-side converter considering their capability curves and illustrating that it can effectively utilise the aggregated DFIG reactive power capability for system performance enhancement. The performance of the multi-objective strategy is examined for a range of wind and network conditions, and it is shown that for the majority of the scenarios, more than 92% of the main control objective can be achieved while introducing the integrated flicker control scheme with the main reactive power control scheme. Therefore, optimal control coordination across the different control strategies can maximise the availability of ancillary services from DFIG-based wind farms without additional dynamic reactive power devices being installed in power networks.

Capability Curve Based Enhanced Reactive Power Control Strategy for Stability Enhancement and Network Voltage Management

Reactive power has become a vital resource in modern electricity networks due to increased penetration of distributed generation. This paper examines the extended reactive power capability of DFIGs to improve network stability and capability to manage network voltage profile during transient faults and dynamic operating conditions. A coordinated reactive power controller is designed by considering the reactive power capabilities of the rotor-side converter (RSC) and the grid-side converter (GSC) of the DFIG in order to maximise the reactive power support from DFIGs. The study has illustrated that, a significant reactive power contribution can be obtained from partially loaded DFIG wind farms for stability enhancement by using the proposed capability curve based reactive power controller; hence DFIG wind farms can function as vital dynamic reactive power resources for power utilities without commissioning additional dynamic reactive power devices. Several network adaptive droop control schemes are also proposed for network voltage management and their performance has been investigated during variable wind conditions. Furthermore, the influence of reactive power capability on network adaptive droop control strategies has been investigated and it has also been shown that enhanced reactive power capability of DFIGs can substantially improve the voltage control performance.

Control of morphological properties of porous biodegradable scaffolds processed by supercritical CO2 foaming

A low cost supercritical CO foaming rig with a novel design has been used to prepare fully interconnected and highly porous biodegradable scaffolds with controllable pore size and structure that can promote cancellous bone regeneration. Porous polymer scaffolds have been produced by plasticising the polymer with high pressure CO and by the formation of a porous structure following the escape of CO from the polymer. Although, control over pore size and structure has been previously reported as difficult with this process, the current study shows that control is possible. The effects of processing parameters such as CO saturation pressure, time and temperature and depressurisation rate on the morphological properties, namely porosity, pore interconnectivity, pore size and wall thickness- of the scaffolds have been investigated. Poly(d,l)lactic acid was used as the biodegradable polymer. The surfaces and internal morphologies of the poly(d,l)lactic acid scaffolds were examined using optical microscope and micro computed tomography. Preosteoblast human bone cells were seeded on the porous scaffolds in vitro to assess cell attachment and viability. The scaffolds showed a good support for cell attachment, and maintained cell viability throughout 7 days in culture. This study demonstrated that the morphology of the porous structure can be controlled by varying the foaming conditions, allowing the porous scaffolds to be used in various tissue engineering applications.

Mechanisms and sources of passive intermodulation in printed circuits

Modern wireless systems are expected to operate in multiple frequency bands and support diverse communications standards to provide the high volume and speed of data transmission. Today's major limitations of their performance are imposed by interference, spurious emission and noise generated by high-power carriers in antennas and passive components of the RF front-end. Passive Intermodulation (PIM), which causes the combinatorial frequency generation in the operational bands, presents a primary challenge to signal integrity, system efficacy and data throughput. © 2013 IEEE.

Energy monitoring and quality control of a single screw extruder

Polymer extrusion, in which a polymer is melted and conveyed to a mould or die, forms the basis of most polymer processing techniques. Extruders frequently run at non-optimised conditions and can account for 15–20% of overall process energy losses. In times of increasing energy efficiency such losses are a major concern for the industry. Product quality, which depends on the homogeneity and stability of the melt flow which in turn depends on melt temperature and screw speed, is also an issue of concern of processors. Gear pumps can be used to improve the stability of the production line, but the cost is usually high. Likewise it is possible to introduce energy meters but they also add to the capital cost of the machine. Advanced control incorporating soft sensing capabilities offers opportunities to this industry to improve both quality and energy efficiency. Due to strong correlations between the critical variables, such as the melt temperature and melt pressure, traditional decentralized PID (Proportional–Integral–Derivative) control is incapable of handling such processes if stricter product specifications are imposed or the material is changed from one batch to another. In this paper, new real-time energy monitoring methods have been introduced without the need to install power meters or develop data-driven models. The effects of process settings on energy efficiency and melt quality are then studied based on developed monitoring methods. Process variables include barrel heating temperature, water cooling temperature, and screw speed. Finally, a fuzzy logic controller is developed for a single screw extruder to achieve high melt quality. The resultant performance of the developed controller has shown it to be a satisfactory alternative to the expensive gear pump. Energy efficiency of the extruder can further be achieved by optimising the temperature settings. Experimental results from open-loop control and fuzzy control on a Killion 25 mm single screw extruder are presented to confirm the efficacy of the proposed approach.

Distribution Network Voltage Support Using Sensitivity-based Dispatch of Distributed Generation

This paper is concerned with the voltage and reactive power issues surrounding the connection of Distributed Generation (DG) on the low-voltage (LV) distribution network. The presented system-wide voltage control algorithm consists of three stages. Firstly available reactive power reserves are utilized. Then, if required, DG active power output is curtailed. Finally, curtailment of non-critical site demand is considered. The control methodology is tested on a variant of the 13-bus IEEE Node Radial Distribution Test Feeder. The presented control algorithm demonstrated that the distribution system operator (DSO) can maintain voltage levels within a desired statutory range by dispatching reactive power from DG or network devices. The practical application of the control strategy is discussed.

Self-Feedback Motion Control for Cable-Driven Parallel Manipulators

This article proposes a closed-loop control scheme based on joint-angle feedback for cable-driven parallel manipulators (CDPMs), which is able to overcome various difficulties resulting from the flexible nature of the driven cables to achieve higher control accuracy. By introducing a unique structure design that accommodates built-in encoders in passive joints, the seven degrees of freedom (7-DOF) CDPM can obtain joint angle values without external sensing devices, and it is used for feedback control together with a proper closed-loop control algorithm. The control algorithm has been derived from the time differential of the kinematic formulation, which relates the joint angular velocities to the time derivative of cable lengths. In addition, the Lyapunov stability theory and Monte Carlo method have been used to mathematically verify the self-feedback control law that has tolerance for parameter errors. With the aid of co-simulation technique, the self-feedback closed-loop control is applied on a 7-DOF CDPM and it shows higher motion accuracy than the one with an open-loop control. The trajectory tracking experiment on the motion control of the 7-DOF CDPM demonstrated a good performance of the self-feedback control method.

A predictive maintenance system for integral type faults based on support vector machines:An application to ion implantation

In semiconductor fabrication processes, effective management of maintenance operations is fundamental to decrease costs associated with failures and downtime. Predictive Maintenance (PdM) approaches, based on statistical methods and historical data, are becoming popular for their predictive capabilities and low (potentially zero) added costs. We present here a PdM module based on Support Vector Machines for prediction of integral type faults, that is, the kind of failures that happen due to machine usage and stress of equipment parts. The proposed module may also be employed as a health factor indicator. The module has been applied to a frequent maintenance problem in semiconductor manufacturing industry, namely the breaking of the filament in the ion-source of ion-implantation tools. The PdM has been tested on a real production dataset. © 2013 IEEE.