Numerical modelling of unsteady mixed flows

This thesis concerns mixed flows (which are characterized by the simultaneous occurrence of free-surface and pressurized flow in sewers, tunnels, culverts or under bridges), and contributes to the improvement of the existing numerical tools for modelling these phenomena. The classic Preissmann slot approach is selected due to its simplicity and capability of predicting results comparable to those of a more recent and complex two-equation model, as shown here with reference to a laboratory test case. In order to enhance the computational efficiency, a local time stepping strategy is implemented in a shock-capturing Godunov-type finite volume numerical scheme for the integration of the de Saint-Venant equations. The results of different numerical tests show that local time stepping reduces run time significantly (between −29% and −85% CPU time for the test cases considered) compared to the conventional global time stepping, especially when only a small region of the flow field is surcharged, while solution accuracy and mass conservation are not impaired. The second part of this thesis is devoted to the modelling of the hydraulic effects of potentially pressurized structures, such as bridges and culverts, inserted in open channel domains. To this aim, a two-dimensional mixed flow model is developed first. The classic conservative formulation of the 2D shallow water equations for free-surface flow is adapted by assuming that two fictitious vertical slots, normally intersecting, are added on the ceiling of each integration element. Numerical results show that this schematization is suitable for the prediction of 2D flooding phenomena in which the pressurization of crossing structures can be expected. Given that the Preissmann model does not allow for the possibility of bridge overtopping, a one-dimensional model is also presented in this thesis to handle this particular condition. The flows below and above the deck are considered as parallel, and linked to the upstream and downstream reaches of the channel by introducing suitable internal boundary conditions. The comparison with experimental data and with the results of HEC-RAS simulations shows that the proposed model can be a useful and effective tool for predicting overtopping and backwater effects induced by the presence of bridges and culverts.

Stratigrafia fisica ed analisi di facies dei depositi torbiditici della Formazione delle Arenarie del Monte Cervarola tra la Val Secchia e la Val Scoltenna (Aquitaniano-Burdigaliano, Appennino Settentrionale)

The Cervarola Sandstones Formation (CSF), Aquitanian-Burdigalian in age, was deposited in an elongate, NW-stretched foredeep basin formed in front of the growing Northern Apennines orogenic wedge. The stratigraphic succession of the CSF, in the same way of other Apennine foredeep deposits, records the progressive closure of the basin due to the propagation of thrust fronts toward north-east, i.e. toward the outer and shallower foreland ramp. This process produce a complex foredeep characterized by synsedimentary structural highs and depocenters that can strongly influence the lateral and vertical turbidite facies distribution. Of consequence the main aim of this work is to describe and discuss this influence on the basis of a new high-resolution stratigraphic framework performed by measuring ten stratigraphic logs, for a total thickness of about 2000m, between the Secchia and Scoltenna Valleys (30km apart). In particular, the relationship between the turbidite sedimentation and the ongoing tectonic activity during the foredeep evolution has been describe through various stratigraphic cross sections oriented parallel and perpendicular to the main tectonic structures. On the basis of the high resolution physical stratigraphy of the studied succession, we propose a facies tract and an evolutionary model for the Cervarola Sandstones in the studied area. Thanks to these results and the analogies with others foredeep deposits of the northern Apennines, such as the Marnoso-arenacea Formation, the Cervarola basin has been interpreted as a highly confined foredeep controlled by an intense synsedimentary tectonic activity. The most important evidences supporting this hypothesis are: 1) the upward increase, in the studied stratigraphic succession (about 1000m thick), of sandstone/mudstone ratio, grain sizes and Ophiomorpha-type trace fossils testifying the high degree of flow deceleration related to the progressive closure and uplift of the foredeep. 2) the occurrence in the upper part of the stratigraphic succession of coarse-grained massive sandstones overlain by tractive structures such as megaripples and traction carpets passing downcurrent into fine-grained laminated contained-reflected beds. This facies tract is interpreted as related to deceleration and decoupling of bipartite flows with the deposition of the basal dense flows and bypass of the upper turbulent flows. 3) the widespread occurrence of contained reflected beds related to morphological obstacles created by tectonic structures parallel and perpendicular to the basin axis (see for example the Pievepelago line). 4) occurrence of intra-formational slumps, constituted by highly deformed portion of fine-grained succession, indicating a syn-sedimentary tectonic activity of the tectonic structures able to destabilize the margins of the basin. These types of deposits increase towards the upper part of the stratigraphic succession (see points 1 and 2) 5) the impressive lateral facies changes between intrabasinal topographic highs characterized by fine-grained and thin sandstone beds and marlstones and depocenters characterized by thick to very thick coarse-grained massive sandstones. 6) the common occurrence of amalgamation surfaces, flow impact structures and mud-draped scours related to sudden deceleration of the turbidite flows induced by the structurally-controlled confinement and morphological irregularities. In conclusion, the CSF has many analogies with the facies associations occurring in other tectonically-controlled foredeeps such as those of Marnoso-arenacea Formation (northern Italy) and Annot Sandstones (southern France) showing how thrust fronts and transversal structures moving towards the foreland, were able to produce a segmented foredeep that can strongly influence the turbidity current deposition.

AS LUZES DA COMUNICAÇÃO NA ERA DO ESPETÁCULO: Olhares em tempo de novas interações midiáticas

O estudo propõe uma reflexão teórica sobre a produção de imagens na era do espetáculo e sua relação com a comunicação. A sistematização da pesquisa bibliográfica sobre a teoria da Sociedade do Espetáculo em Guy Debord leva em conta as questões que decorrem do excesso de luz na produção de imagens, tratada por esta pesquisa por meio do termo luzes da comunicação e apontada como uma das bases da incomunicação. O trabalho pontua a evolução das teorias da comunicação em uma releitura da noção de Sociedade do Espetáculo à luz das novas interações midiáticas. A pesquisa explora as relações sociais e a imagem na dimensão do imaginário e estuda o mito no contexto comunicacional. O esforço da pesquisa trata o mito do espetáculo como o inverso do mito da caverna de Platão onde a caverna seria o próprio espetáculo, lugar das muitas luzes, lugar da incomunicabilidade. A reflexão se depara com novos desafios no mapeamento teórico e na análise dessas novas formas de cultura do espetáculo e de sociedade e de como elas podem conter outras formas de poder nessa relação entre comunicação e suas conexões midiáticas. Por fim, a pesquisa trabalha a possibilidade da prática de alteridade nas relações humanas pela luz da comunicação.

O brincar e o bem-estar da criança abrigada: sua influência no combate à depressão e ao baixo rendimento escolar

Este estudo verifica a eficácia de intervenções lúdicas junto a crianças abrigadas com problemas de aprendizagem e quadros de depressão, analisando a influência do brincar em seu bem-estar e qualidade de vida. Realiza-se através de metodologia clínica-interventiva, junto a oito crianças de ambos os sexos, de 8 anos, de classe de baixa renda, abrigadas há dois anos, cursando a 1ª. série de escola pública, com queixa escolar. Após caracterização da instituição, avalia-se individualmente o nível cognitivo das crianças através das Matrizes Progressivas Coloridas de Raven, das Provas Piagetianas de conservação, classificação e seriação e verifica o material escolar. Aplica a seguir o Inventário de Depressão Infantil CDI, normatizado para o Brasil. Com base nesses dados, realiza oito sessões lúdicas grupais, semanais, de noventa minutos cada, através de estratégias sensório-motoras, simbólicas e sociais, com espaço para atividades espontâneas. Após as intervenções lúdicas, reavalia as crianças com os mesmos instrumentos da avaliação anterior. Os resultados indicam melhora no desempenho escolar e diminuição dos sintomas depressivos, com aumento da auto-estima e da segurança emocional, com reflexos em sua vida em geral, inclusive na escolar. As experiências vivenciadas nas situações lúdicas contribuíram para uma auto-avaliação subjetiva mais positiva pelas crianças, assim como para uma avaliação escolar melhor, em seus aspectos cognitivos e afetivo-emocionais integrados. Os dados apontam a importância da equipe técnica ao reconhecer precocemente os sintomas depressivos para realização de programas interventivos, utilizando o lúdico como facilitador para superação das dificuldades cognitivas e afetivas das crianças abrigadas

Computer aided form roll design

Cold roll forming is an extremely important but little studied sheet metal forming process. In this thesis, the process of cold roll forming is introduced and it is seen that form roll design is central to the cold roll forming process. The conventional design and manufacture of form rolls is discussed and it is observed that surrounding the design process are a number of activities which although peripheral are time consuming and a possible source of error. A CAD/CAM system is described which alleviates many of the problems traditional to form roll design. New techniques for the calculation of strip length and controlling the means of forming bends are detailed. The CAD/CAM system's advantages and limitations are discussed and, whilst the system has numerous significant advantages, its principal limitation can be said to be the need to manufacture form rolls and test them on a mill before a design can be stated satisfactory. A survey of the previous theoretical and experimental analysis of cold roll forming is presented and is found to be limited. By considering the previous work, a method of numerical analysis of the cold roll forming process is proposed based on a minimum energy approach. Parallel to the numerical analysis, a comprehensive range of software has been developed to enhance the designer's visualisation of the effects of his form roll design. A complementary approach to the analysis of form roll design is the generation of form roll design, a method for the partial generation of designs is described. It is suggested that the two approaches should continue in parallel and that the limitation of each approach is knowledge of the cold roll forming process. Hence, an initial experimental investigation of the rolling of channel sections is described. Finally, areas of potential future work are discussed.

Combination of altimetry data from different satellite missions

Substantial altimetry datasets collected by different satellites have only become available during the past five years, but the future will bring a variety of new altimetry missions, both parallel and consecutive in time. The characteristics of each produced dataset vary with the different orbital heights and inclinations of the spacecraft, as well as with the technical properties of the radar instrument. An integral analysis of datasets with different properties offers advantages both in terms of data quantity and data quality. This thesis is concerned with the development of the means for such integral analysis, in particular for dynamic solutions in which precise orbits for the satellites are computed simultaneously. The first half of the thesis discusses the theory and numerical implementation of dynamic multi-satellite altimetry analysis. The most important aspect of this analysis is the application of dual satellite altimetry crossover points as a bi-directional tracking data type in simultaneous orbit solutions. The central problem is that the spatial and temporal distributions of the crossovers are in conflict with the time-organised nature of traditional solution methods. Their application to the adjustment of the orbits of both satellites involved in a dual crossover therefore requires several fundamental changes of the classical least-squares prediction/correction methods. The second part of the thesis applies the developed numerical techniques to the problems of precise orbit computation and gravity field adjustment, using the altimetry datasets of ERS-1 and TOPEX/Poseidon. Although the two datasets can be considered less compatible that those of planned future satellite missions, the obtained results adequately illustrate the merits of a simultaneous solution technique. In particular, the geographically correlated orbit error is partially observable from a dataset consisting of crossover differences between two sufficiently different altimetry datasets, while being unobservable from the analysis of altimetry data of both satellites individually. This error signal, which has a substantial gravity-induced component, can be employed advantageously in simultaneous solutions for the two satellites in which also the harmonic coefficients of the gravity field model are estimated.

A cross-national investigation into the marketing department's influence within the firm

Both marketing academics and practitioners are debating the diminished role of marketing as a separate function within firms. In this study, which expands on previous research on Dutch companies, the authors focus on how the marketing department’s capabilities relate to business performance across countries. The authors collected data in seven Western countries—the Netherlands, Germany, Sweden, United Kingdom, United States, Australia, and Israel. They surveyed top marketing and financial executives, CEOs, and other top employees of profit-based middle-sized and large firms. Their findings show that accountability provides the most consistent predictor of influence, whereas the marketing department’s innovativeness and customer connection show less consistent results. Across the seven countries, the department’s integration with the finance department has a consistent but negative effect on the department’s perceived influence. The influences of marketing departments clearly differ across countries. Perceived influence is substantially higher in the United States and Israel than in other countries, whereas top management respect for the marketing department is substantially higher in Israel than in any other country. The study also found that the marketing department is well represented on the boards of companies in Sweden, Israel, and the United States. In most countries, marketing tends not to be organized as a line function. Some differences among countries emerge in the relationships between the marketing department’s influence and business performance. In Israel, the United States, the United Kingdom, Germany, and Australia, influence relates positively to business performance, whereas in the Netherlands, it has no influence. The results for Sweden suggest a negative influence. The authors conclude that a strong marketing department appears to benefit firms in most of the countries studied. The results imply that the marketing department should have input into boardroom considerations.

Mesoporous silicas as versatile supports to tune the palladium-catalyzed selective aerobic oxidation of allylic alcohols

Surfactant templating offers a simple route to synthesize high-surface area silicas with ordered, tunable mesopore architectures. The use of these materials as versatile catalyst supports for palladium nanoparticles has been explored in the aerobic selective oxidation (selox) of allylic alcohols under mild conditions. Families of Pd/mesoporous silicas, synthesized through incipient wetness impregnation of SBA-15, SBA-16, and KIT-6, have been characterized by using nitrogen porosimetry, CO chemisorption, diffuse reflection infrared Fourier transform spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and high-resolution TEM and benchmarked in liquid phase allylic alcohol selox against a Pd/amorphous SiO2 standard. The transition from amorphous to two-dimensional parallel and three-dimensional interpenetrating porous silica networks conferred significant selox rate enhancements associated with higher surface densities of active palladium oxide sites. Dissolved oxygen was essential for insitu stabilization of palladium oxide, and thus maintenance of high activity on-stream, whereas selectivity to the desired aldehyde selox product over competing hydrogenolysis pathways was directed by using palladium metal. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Hydrogen embrittlement contributions to fatigue crack growth in a structural steel

The detrimental effects of a hydrogen atmosphere on the fatigue resistance of BS 4360 steel have been assessed by a comparison of crack growth rates in air and hydrogen at a low cycling frequency (0.1Hz), and at a number of temperature (25, 50 and 80 °C). The crack propagation rates in air are almost independent of temperature over this range, but those measured in hydrogen differ by more than an order of magnitude between 25 and 80 °C. The greatest enhancement is seen at 25 °C and at high values of ΔK, the maximum occurring between 40–45 MPa √m at each temperature. There is little hydrogen contribution to crack growth at values of ΔK below 20 MPa √m for R = 0.1. The enhancement of crack growth rates is reflected by the presence of ‘quasi-cleavage’ facets on the fatigue fracture surfaces of specimens tested in hydrogen. These are most apparent where the greatest increases in growth rate are recorded. The facets show linear markings, which run both parallel and perpendicular to the direction of crack growth. The former are analogous to the ‘river’ lines noted on brittle cleavage facets, and reflect the propagation direction. The latter are more unusual, and indicate that facet formation by hydrogen embrittlement during fatigue is a step-wise process.

Static Analysis of Usefulness States in Transition P Systems

Transition P Systems are a parallel and distributed computational model based on the notion of the cellular membrane structure. Each membrane determines a region that encloses a multiset of objects and evolution rules. Transition P Systems evolve through transitions between two consecutive configurations that are determined by the membrane structure and multisets present inside membranes. Moreover, transitions between two consecutive configurations are provided by an exhaustive non-deterministic and parallel application of evolution rules. But, to establish the rules to be applied, it is required the previous calculation of useful, applicable and active rules. Hence, computation of useful evolution rules is critical for the whole evolution process efficiency, because it is performed in parallel inside each membrane in every evolution step. This work defines usefulness states through an exhaustive analysis of the P system for every membrane and for every possible configuration of the membrane structure during the computation. Moreover, this analysis can be done in a static way; therefore membranes only have to check their usefulness states to obtain their set of useful rules during execution.

Decision Trees for Applicability of Evolution Rules in Transition P Systems

Transition P Systems are a parallel and distributed computational model based on the notion of the cellular membrane structure. Each membrane determines a region that encloses a multiset of objects and evolution rules. Transition P Systems evolve through transitions between two consecutive configurations that are determined by the membrane structure and multisets present inside membranes. Moreover, transitions between two consecutive configurations are provided by an exhaustive non-deterministic and parallel application of active evolution rules subset inside each membrane of the P system. But, to establish the active evolution rules subset, it is required the previous calculation of useful and applicable rules. Hence, computation of applicable evolution rules subset is critical for the whole evolution process efficiency, because it is performed in parallel inside each membrane in every evolution step. The work presented here shows advantages of incorporating decision trees in the evolution rules applicability algorithm. In order to it, necessary formalizations will be presented to consider this as a classification problem, the method to obtain the necessary decision tree automatically generated and the new algorithm for applicability based on it.

HW Implementation of a Optimized Algorithm for the Application of Active Rules in a Transition P-system

P systems or Membrane Computing are a type of a distributed, massively parallel and non deterministic system based on biological membranes. They are inspired in the way cells process chemical compounds, energy and information. These systems perform a computation through transition between two consecutive configurations. As it is well known in membrane computing, a configuration consists in a m-tuple of multisets present at any moment in the existing m regions of the system at that moment time. Transitions between two configurations are performed by using evolution rules which are in each region of the system in a non-deterministic maximally parallel manner. This work is part of an exhaustive investigation line. The final objective is to implement a HW system that evolves as it makes a transition P-system. To achieve this objective, it has been carried out a division of this generic system in several stages, each of them with concrete matters. In this paper the stage is developed by obtaining the part of the system that is in charge of the application of the active rules. To count the number of times that the active rules is applied exist different algorithms. Here, it is presents an algorithm with improved aspects: the number of necessary iterations to reach the final values is smaller than the case of applying step to step each rule. Hence, the whole process requires a minor number of steps and, therefore, the end of the process will be reached in a shorter length of time.

Fuzzy Membership Functions in a Fuzzy Decision Making Problem

Authors analyses questions of the subjective uncertainty and inexactness situations in the moment of using expert information and another questions which are connected with expert information uncertainty by fuzzy sets with rough membership functions in this article. You can find information about integral problems of individual expert marks and about connection among total marks “degree of inexactness” with sensibility of measurement scale. A lot of different situation which are connected with distribution of the function accessory significance and orientation of the concrete take to task decision making are analyses here.

On Compositions in Equiaffine Space

In an equiaffine space q N E using the connection define with projective tensors na and ma the connections 1 , 2 and 3 . For the spaces N N 1A ,2A and N 3A , with coefficient of connection 1 , 2 and 3 respectively, we proved that the affinor of composition and the projective affinors have equal covariant derivatives. It follows that the connection 3 is equaffine as well, and the connections and 3 are projective to each other. In the case where q N E and N 3A have equal Ricci tensors, we find the fundamental nvector . In [4] compositions with structural affinor a are studied. Space containing compositions with symmetric connection and Weyl connection are studied in [6] and [7] respectively.

On Compositions in Equiaffine Space

In an equiaffine space q N E using the connection define with projective tensors na and ma the connections 1 , 2 and 3 . For the spaces N N 1A ,2A and N 3A , with coefficient of connection 1 , 2 and 3 respectively, we proved that the affinor of composition and the projective affinors have equal covariant derivatives. It follows that the connection 3 is equaffine as well, and the connections and 3 are projective to each other. In the case where q N E and N 3A have equal Ricci tensors, we find the fundamental nvector . In [4] compositions with structural affinor a are studied. Space containing compositions with symmetric connection and Weyl connection are studied in [6] and [7] respectively.