Effects of hydrocarbons on reproductive physiology of the pearl oyster, Pinctada fucata

There are a lot of evidence that show hvdrocarbones cause some defect in reproduction and growth of bivalves. Bivalves are filter-feeder, thus accumulate more hydrocarbones in their tissue. In this study adult pearl producing oysters (Pinctada fucata) are used for all experimens. Samples of oysters, water and sediment from four natural beds; Nakhiloo (clean), Hendurabi (semipolluted), Lavan 1 (semipolluted) and Lavan 2 (polluted) were gatherd for 13 succesive months. Temperature, salinity, pH, oxygen and turbidity were recorded in each sampling. Oysters were kept in laboratory for adapation and then their length (DVM) were measured. Hemolymph samples were collected by insuline syring. Sediments and soft tissues of oysters were dissolved in carbon tetrachloride and when heated to extract oil hydrocarbones. UV, GC and IR were used to assay oil hydrocarbones. Accumulation of hydrocabones in soft tissue were as follows : Kakhiloo

Empowerment through filleting

Women’s labour adds value to the fish supply chain in Petatán, Mexico, and brings independence and hope to their lives. Located in the central-western part of the country, Lake Chapala is Mexico’s largest lake, and one of the many fishing villages bordering the lake is Petatán, with a population of only 423 inhabitants. However, what makes Petatán special is that most fish caught in Lake Chapala—tilapia and carp—as well as other water bodies in the region is processed here. There are no official statistics for how much fish is filleted and packed in ice every day, but Petatán houses the second largest fish processing industry in the region. The fish filleted here goes to El Mercado del Mar, the second largest fish market in the country, from where it is distributed to restaurants, smaller markets and other parts of the country.

Management of water hyacinth, Eichhornia crassipes, in Lake Victoria Basin

Water hyacinth is a free-floating waterweed native to the Amazon River Basin in South America. In its native range, water hyacinth is not an environmental problem, although the weed is one of the most invasive alien plants in freshwater environments. Water hyacinth has the potential to become invasive through fast vegetative reproduction and rapid growth to accumulate huge biomass and extensive cover in freshwater environments. Over the last 150 years water hyacinth has invaded most countries in the tropics and sub-tropics, introduced by man, mainly for ornamental purposes. Such introductions led to the infestation of most freshwater-ways in the southern United States of America, parts of Australia, the pacific islands, and most countries in Asia and Africa. The extensive tightly packed mats of water hyacinth are often associated with devastating socio-economic and environmental impacts. Invasion by the weed has, therefore, often generated urgent costly problems associated with the weed biomass and its management. A classic example of such problems was triggered by the invasion and proliferation of water hyacinth in the Lake Victoria Basin during the 1980s (Freilink 1989, Taylor 1993, Twongo et al., 1995). The weed infestation marked the beginning of a decade of intensive and systematic campaign by the three riparian states (Kenya, Tanzania and Uganda) to bring weed proliferation under control. The discussions in this Chapter span over ten years of dealing with the challenges paused by the imperative to manage infestations of water hyacinth in the Lake Victoria Basin. The challenges included the need to understand the dynamics of water hyacinth infestation; its distribution, proliferation and impact modalities; and the development and implementation of appropriate weed control strategies and options. Most specific examples were taken from the Ugandan experience (NARO, 2002).

Increase in fish production achieved by stocking exotic species (Lake Kyoga, Uganda)

The Lake Kyoga complex lies towards the north of Uganda, at 311 altitude of 3,400 feet, between 10 and 2° north of the Equator. The lake is extremely elongate and digitate, shallow (1 metre-7 metres), and almost all the coast-line is swampy, with many papyrus beds. Floating islands of sud are a feature. At its eastern extremity, it breaks up into many swampy, isolated lakes. The Nile from its source at Jinja enters Lake Kyoga on its southern side, and leaves the lake at its western extremity, and winds on through to Lake Albert and the Sudan. The Kyoga/Salisbury /Kwania complex covers 2,354 sq. km. of water. Geologically, the lake is a series of flooded river valleys, probably resulting from the uplifting of the western edge of the basin in the Pliocene and the Pleistocene ages aud the endemic fish fauna is very similar to that of Lake Victoria, although Kyoga has not developed the species flocks of haplochromis which characterise the larger lake. The Victoria fauna extends down-stream of Lake Kyoga to the Murchison Falls on the Nile, which forms an almost complete barrier between Kyoga and the typical nilotic fauna of the Nile below Murchison and Lake Albert.

A report of the gillnet survey in the Ugandan waters of Lake Victoria under IFMP (January to March 2006)

Under the Implementation of the Fisheries Management Plan (IFMP) for Lake Victoria Result area 4, quarterly gillnet surveys are undertaken to monitor changes in fish stocks and environmental parameters in the shallow nontrawlable areas of the lake For purposes of monitoring surveys, the Ugandan sector of Lake Victoria is divided into 3 zones as shown in Figure 1. During the second quarter of APE2, two gillnet surveys were undertaken in zones 1 and 3 in February and March 2006 respectively. The purpose of the surveys was to monitor changes in the fish stocks and their biological characteristics, water quality, algal dynamics and invertebrate communities; as detailed in the various sections of the report. The surveys followed those conducted in November and December 2006 in the same zones. Results of the surveys showed that the number of fish taxa was higher in the near-shore fleets (0-100m) decreasing towards offshore. The near-shore areas were also associated with high primary productivity and hence secondary production to which Caridina and other invertebrates are part. These organisms are an important source of food for the fish and this may partly account for the high number of fish species recorded in this area of the lake. It was also observed that although Nile perch was the most dominant fish species recorded in all the stations during the surveys, haplochromines, Brycinus sadleri, Brycinus jacksonii Oreochromis niloticus and various mormyrid species contributed significantly to the fish biomass. The presence of many fish species and their coexistence with the predator, Nile perch is attributed to the presence of macrophyte cover and rocky habitats which serve as refugia in the shallow inshore habitats of Lake Victoria. In addition, the vegetated habitats are an important source of food for the fishes. As reported in macro-invertebrate studies, big populations of Caridina and other invertebrates were recorded among macrophyte beds. Caridina is an important source of food for juvenile Nile perch and other fish species so are the other invertebrates especially chironomid larvae, odonata nymphs and molluscs. Resurgence in haplochromine cichlids was observed during the surveys. The presence of haplochromines cichlids in all the sites especially Thruston Bay where it ranked the second by percentage contribution in number, is evidence of the recovery of this group of fishes which had declined largely due to predation by L. niloticus. Caridina nilotica has also increased in biomass and is a major component of the Nile perch diet. This could have reduced predation pressure on the haplochromines by Nile perch and has possibly contributed to recent resurgence in haplochromines cichlids in the lake in the shallow nontrawlable areas of the lake Rastrineobola argentea was found to be an important prey item for Nile perch and other fish species such as Clarias gariepinus. Measures should therefore be taken to ensure sustainable harvesting of Dagaa so that there is enough left to sustain the fishery of Nile perch and other species.

Ultra-structural defects cause low bone matrix stiffness despite high mineralization in osteogenesis imperfecta mice.

Bone is a complex material with a hierarchical multi-scale organization from the molecule to the organ scale. The genetic bone disease, osteogenesis imperfecta, is primarily caused by mutations in the collagen type I genes, resulting in bone fragility. Because the basis of the disease is molecular with ramifications at the whole bone level, it provides a platform for investigating the relationship between structure, composition, and mechanics throughout the hierarchy. Prior studies have individually shown that OI leads to: 1. increased bone mineralization, 2. decreased elastic modulus, and 3. smaller apatite crystal size. However, these have not been studied together and the mechanism for how mineral structure influences tissue mechanics has not been identified. This lack of understanding inhibits the development of more accurate models and therapies. To address this research gap, we used a mouse model of the disease (oim) to measure these outcomes together in order to propose an underlying mechanism for the changes in properties. Our main finding was that despite increased mineralization, oim bones have lower stiffness that may result from the poorly organized mineral matrix with significantly smaller, highly packed and disoriented apatite crystals. Using a composite framework, we interpret the lower oim bone matrix elasticity observed as the result of a change in the aspect ratio of apatite crystals and a disruption of the crystal connectivity.

Validation of a lattice Boltzmann model for gas-solid reactions with experiments

A lattice Boltzmann method is used to model gas-solid reactions where the composition of both the gas and solid phase changes with time, while the boundary between phases remains fixed. The flow of the bulk gas phase is treated using a multiple relaxation time MRT D3Q19 model; the dilute reactant is treated as a passive scalar using a single relaxation time BGK D3Q7 model with distinct inter- and intraparticle diffusivities. A first-order reaction is incorporated by modifying the method of Sullivan et al. [13] to include the conversion of a solid reactant. The detailed computational model is able to capture the multiscale physics encountered in reactor systems. Specifically, the model reproduced steady state analytical solutions for the reaction of a porous catalyst sphere (pore scale) and empirical solutions for mass transfer to the surface of a sphere at Re=10 (particle scale). Excellent quantitative agreement between the model and experiments for the transient reduction of a single, porous sphere of Fe 2O 3 to Fe 3O 4 in CO at 1023K and 10 5Pa is demonstrated. Model solutions for the reduction of a packed bed of Fe 2O 3 (reactor scale) at identical conditions approached those of experiments after 25 s, but required prohibitively long processor times. The presented lattice Boltzmann model resolved successfully mass transport at the pore, particle and reactor scales and highlights the relevance of LB methods for modelling convection, diffusion and reaction physics. © 2012 Elsevier Inc.

Hydrogen-induced morphotropic phase transformation of single-crystalline vanadium dioxide nanobeams.

We report a morphotropic phase transformation in vanadium dioxide (VO2) nanobeams annealed in a high-pressure hydrogen gas, which leads to the stabilization of metallic phases. Structural analyses show that the annealed VO2 nanobeams are hexagonal-close-packed structures with roughened surfaces at room temperature, unlike as-grown VO2 nanobeams with the monoclinic structure and with clean surfaces. Quantitative chemical examination reveals that the hydrogen significantly reduces oxygen in the nanobeams with characteristic nonlinear reduction kinetics which depend on the annealing time. Surprisingly, the work function and the electrical resistance of the reduced nanobeams follow a similar trend to the compositional variation due mainly to the oxygen-deficiency-related defects formed at the roughened surfaces. The electronic transport characteristics indicate that the reduced nanobeams are metallic over a large range of temperatures (room temperature to 383 K). Our results demonstrate the interplay between oxygen deficiency and structural/electronic phase transitions, with implications for engineering electronic properties in vanadium oxide systems.

Bending of nanoscale filament assemblies by elastocapillary densification

We report a mechanism by which nanoscale filaments self-assemble into asymmetric aggregates by elastocapillary action. Specifically, capillary rise of liquid into an asymmetric pattern of vertically aligned filaments causes the filaments to deflect laterally during elastocapillary densification. We quantitatively show that the lateral deflection can be controlled precisely by the pattern shape and the coupling strength among the filaments. We exploit this mechanism to fabricate asymmetric micropillars and multidirectional bridges of densely packed carbon nanotubes. Analogous behavior occurs as biological filaments interact with liquids, and these findings enable scalable fabrication of anisotropic filament assemblies for manipulating surface interactions between solids and liquids. © 2010 The American Physical Society.

Comparison of square and hexagonal fuel lattices for high conversion PWRs

This paper reports on an investigation into fuel design choices of a pressurized water reactor operating in a self-sustainable Th- 233U fuel cycle. In order to evaluate feasibility of this concept, two types of fuel assembly lattices were considered: square and hexagonal. The hexagonal lattice may offer some advantages over the square one. For example, the fertile blanket fuel can be packed more tightly reducing the blanket volume fraction in the core and potentially allowing to achieve higher core average power density. The calculations were carried out with Monte-Carlo based BGCore code system and the results were compared to those obtained with Serpent Monte-Carlo code and deterministic transport code BOXER. One of the major design challenges associated with the SB concept is high power peaking due to the high concentration of fissile material in the seed region. The second objective of this work is to estimate the maximum achievable core power density by evaluation of limiting thermal hydraulic parameters. The analysis showed that both fuel assembly designs have a potential of achieving net breeding. Although hexagonal lattice was found to be somewhat more favorable because it allows achieving higher power density, while having breeding performance comparable to the square lattice case. © Carl Hanser Verlag München.

Novel ZnO nanorod films by chemical solution deposition for planar device applications.

Smooth and continuous ZnO films consisting of densely packed ZnO nanorods (NRs), which can be used for electronic device fabrication, were synthesized using a hydro-thermo-chemical solution deposition method. Such devices would have the novelty of high performance, benefiting from the inherited unique properties of the nanomaterials, and can be fabricated on these smooth films using a conventional, low cost planar process. Photoluminescence measurements showed that the NR films have much stronger shallow donor to valence band emissions than those from discrete ZnO NRs, and hence have the potential for the development of ZnO light emission diodes and lasers, etc. The NR films have been used to fabricate large area surface acoustic wave devices by conventional photolithography. These demonstrated two well-defined resonant peaks and their potential for large area device applications. The chemical solution deposition method is simple, reproducible, scalable and economic. These NR films are suitable for large scale production on cost-effective substrates and are promising for various fields such as sensing systems, renewable energy and optoelectronic applications.

Adapting data processing to compare model and experiment accurately: A discrete element model and magnetic resonance measurements of a 3d cylindrical fluidized bed

Discrete element modeling is being used increasingly to simulate flow in fluidized beds. These models require complex measurement techniques to provide validation for the approximations inherent in the model. This paper introduces the idea of modeling the experiment to ensure that the validation is accurate. Specifically, a 3D, cylindrical gas-fluidized bed was simulated using a discrete element model (DEM) for particle motion coupled with computational fluid dynamics (CFD) to describe the flow of gas. The results for time-averaged, axial velocity during bubbling fluidization were compared with those from magnetic resonance (MR) experiments made on the bed. The DEM-CFD data were postprocessed with various methods to produce time-averaged velocity maps for comparison with the MR results, including a method which closely matched the pulse sequence and data processing procedure used in the MR experiments. The DEM-CFD results processed with the MR-type time-averaging closely matched experimental MR results, validating the DEM-CFD model. Analysis of different averaging procedures confirmed that MR time-averages of dynamic systems correspond to particle-weighted averaging, rather than frame-weighted averaging, and also demonstrated that the use of Gaussian slices in MR imaging of dynamic systems is valid. © 2013 American Chemical Society.

Dry oxidation and vacuum annealing treatments for tuning the wetting properties of carbon nanotube arrays.

In this article, we describe a simple method to reversibly tune the wetting properties of vertically aligned carbon nanotube (CNT) arrays. Here, CNT arrays are defined as densely packed multi-walled carbon nanotubes oriented perpendicular to the growth substrate as a result of a growth process by the standard thermal chemical vapor deposition (CVD) technique.(1,2) These CNT arrays are then exposed to vacuum annealing treatment to make them more hydrophobic or to dry oxidation treatment to render them more hydrophilic. The hydrophobic CNT arrays can be turned hydrophilic by exposing them to dry oxidation treatment, while the hydrophilic CNT arrays can be turned hydrophobic by exposing them to vacuum annealing treatment. Using a combination of both treatments, CNT arrays can be repeatedly switched between hydrophilic and hydrophobic.(2) Therefore, such combination show a very high potential in many industrial and consumer applications, including drug delivery system and high power density supercapacitors.(3-5) The key to vary the wettability of CNT arrays is to control the surface concentration of oxygen adsorbates. Basically oxygen adsorbates can be introduced by exposing the CNT arrays to any oxidation treatment. Here we use dry oxidation treatments, such as oxygen plasma and UV/ozone, to functionalize the surface of CNT with oxygenated functional groups. These oxygenated functional groups allow hydrogen bond between the surface of CNT and water molecules to form, rendering the CNT hydrophilic. To turn them hydrophobic, adsorbed oxygen must be removed from the surface of CNT. Here we employ vacuum annealing treatment to induce oxygen desorption process. CNT arrays with extremely low surface concentration of oxygen adsorbates exhibit a superhydrophobic behavior.

An integrated 2-D model of a lithium ion battery: The effect of material parameters and morphology on storage particle stress

An integrated 2-D model of a lithium ion battery is developed to study the mechanical stress in storage particles as a function of material properties. A previously developed coupled stress-diffusion model for storage particles is implemented in 2-D and integrated into a complete battery system. The effect of morphology on the stress and lithium concentration is studied for the case of extraction of lithium in terms of previously developed non-dimensional parameters. These non-dimensional parameters include the material properties of the storage particles in the system, among other variables. We examine particles functioning in isolation as well as in closely-packed systems. Our results show that the particle distance from the separator, in combination with the material properties of the particle, is critical in predicting the stress generated within the particle. © 2012 Springer-Verlag.

Porous boron-doped diamond/carbon nanotube electrodes.

Nanostructuring boron-doped diamond (BDD) films increases their sensitivity and performance when used as electrodes in electrochemical environments. We have developed a method to produce such nanostructured, porous electrodes by depositing BDD thin film onto a densely packed "forest" of vertically aligned multiwalled carbon nanotubes (CNTs). The CNTs had previously been exposed to a suspension of nanodiamond in methanol causing them to clump together into "teepee" or "honeycomb" structures. These nanostructured CNT/BDD composite electrodes have been extensively characterized by scanning electron microscopy, Raman spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. Not only do these electrodes possess the excellent, well-known characteristics associated with BDD (large potential window, chemical inertness, low background levels), but also they have electroactive areas and double-layer capacitance values ∼450 times greater than those for the equivalent flat BDD electrodes.