Overall Feasibility of Low Cost Conversion from PV to PVTw

La ponencia presenta una comparación entre el rendimiento energético que se obtiene con un módulo fotovoltaico convencional, sin utilizar ningún medio para reducir la temperatura de sus células, y el rendimiento global que resulta si se incorpora a dicho módulo un intercambiador de calor en su parte trasera para reducir la temperatura de sus células y a la vez elevar la temperatura del agua proveniente de la red urbana de abastecimiento. El estudio muestra que el incremento de energia total que se logra mediante la solución propuesta supone una tasa de retorno con un plazo de amortización razonable para este tipo de instalaciones.

Restauración virtual del patrimonio sonoro. Aplicación al antiguo rito hispánico

Una de las aplicaciones más interesantes de las tecnologías de Realidad Acústica Virtual es la posibilidad de recuperar el patrimonio cultural del sonido de los recintos históricos que se han perdido o cuyas características se han modificado a lo largo de los siglos. En este trabajo, las tecnologías de realidad acústica virtual se utilizan para tratar de reconstruir virtualmente el sonido producido en las actividades litúrgicas del antiguo rito hispánico. Bajo este nombre se conoce a la liturgia que celebraban los cristianos de la península ibérica hasta su prohibición, en favor del culto romano, a mediados del siglo XI. El rito hispánico -también conocido como rito visigótico-mozárabe- es una de las manifestaciones culturales más interesantes de la Alta Edad Media en occidente. Se trata de un patrimonio cultural desaparecido, tanto desde el punto de vista de las señales sonoras que lo integraban -ya que la mayoría de las melodías que conformaban el rito se han perdido- como desde el punto de vista de los espacios en los que se desarrollaba, debido a que las iglesias conservadas de la época han experimentado modificaciones a lo largo de los siglos que alteran sus condiciones acústicas con respecto a las que tenían en el periodo de vigencia de esta liturgia. Para llevar a cabo este proyecto, se han realizado modelos acústicos digitales de un grupo representativo de iglesias prerrománicas de la Península Ibérica en su estado primitivo. Se ha procurado que las iglesias seleccionadas representen la variedad de comportamientos acústicos esperables en este tipo de edificios. Con este objetivo, se han elegido cinco iglesias prerrománicas que presentan diferencias sustanciales en los parámetros que, a priori, van a influir en mayor manera a su comportamiento acústico: el volumen del recinto, la forma de la planta y el tipo de cubierta. El proceso de creación de los modelos acústicos digitales de las iglesias se ha dividido en dos fases: en la primera se han creado modelos de los edificios en su estado actual, que se han validado a partir de los datos obtenidos en mediciones acústicas realizadas in situ; a partir de los modelos validados de las iglesias en su estado actual, en la segunda fase se han generado los modelos acústicos digitales correspondientes al estado primitivo de las mismas, modificando los modelos anteriores de acuerdo con las hipótesis de reconstrucción propuestas en las investigaciones arqueológicas más recientes. Se han realizado grabaciones en cámara anecoica de una serie de piezas del repertorio original del canto mozárabe. Las grabaciones se han llevado a cabo con un array esférico compuesto por 32 micrófonos, con objeto de obtener información sobre la directividad de la emisión sonora de los cantantes, que se aplicará en las auralizaciones. Finalmente, se han realizado diversas auralizaciones, teniendo en cuenta diferentes configuraciones litúrgicas que eran usuales en este rito. ABSTRACT One of the most interesting applications of the Acoustic Virtual Reality technologies is the possibility to recover the cultural heritage of the sound of the historical sites that have been lost or whose characteristics have been modified through time. In this work, Acoustic Virtual Reality technologies are used to try to reconstruct virtually the sound produced in the liturgical activities of the Hispanic Rite. This is the name given to the liturgy celebrated by Christians of the Iberian Peninsula prior to the introduction of the Roman cult in the mid-eleventh century. The Hispanic Rite (also known as Visigothic or Mozarabic rite) is one of the most interesting cultural manifestations of the Middle Ages. It is a lost cultural heritage, both from the point of view of the sound signals that were used since the majority of the melodies that conformed the rite have been lost, and from the point of view of the spaces in which this liturgy was celebrated, because the churches preserved from that era have changed over the centuries altering its acoustic conditions respect to which they were in the period in which this liturgy was in effect. To carry out this project, acoustic models of a representative group of the pre-Romanesque churches in the Iberian Peninsula have been made in his primitive state. To select the sample of buildings to study, efforts have been made to ensure that the selected churches were representative of the range of expected acoustic behaviors in this type of buildings. Five churches have been selected, showing differences in the parameters that have the greatest influence on their acoustic behavior: the enclosure volume, the shape of the floor plan and the type of roof. The process of creating digital acoustic models of the churches has been divided into two phases. In the first phase acoustic models of the churches in its current state have been created. These models have been validated with the data obtained from in situ acoustic measurements. From the validated models of churches in its current state, in the second phase, changes in the acoustic models have been performed in order to represent the primitive state of the churches, according to the historical reconstruction hypothesis that have been proposed in the most recent archaeological investigations. Anechoic recordings of a series of pieces of the original Mozarabic Chant repertoire have been recorded. The recordings were made with a spherical array composed of 32 microphones, in order to obtain information on the directivity of the sound emission of the singers. These directivity data will be used to simulate the directional radiation of the sound sources in the auralizations. Finally, auralizations were produced corresponding to different liturgical configurations which were common in this rite.

PV power forecast using a nonparametric PV model

Forecasting the AC power output of a PV plant accurately is important both for plant owners and electric system operators. Two main categories of PV modeling are available: the parametric and the nonparametric. In this paper, a methodology using a nonparametric PV model is proposed, using as inputs several forecasts of meteorological variables from a Numerical Weather Forecast model, and actual AC power measurements of PV plants. The methodology was built upon the R environment and uses Quantile Regression Forests as machine learning tool to forecast AC power with a confidence interval. Real data from five PV plants was used to validate the methodology, and results show that daily production is predicted with an absolute cvMBE lower than 1.3%.

A wind tunnel two-dimensional parametric investigation of biplane configurations

This paper presents an experimental and systematic investigation about how geometric parameters on a biplane configuration have an influence on aerodynamic parameters. This experimental investigation has been developed in a two-dimensional approach. Theoretical studies about biplanes configurations have been developed in the past, but there is not enough information about experimental wind tunnel data at low Reynolds number. This two-dimensional study is a first step to further tridimensional investigations about the box wing configuration. The main objective of the study is to find the relationships between the geometrical parameters which present the best aerodynamic behavior: the highest lift, the lowest drag and the lowest slope of the pitching moment. A tridimensional wing-box model will be designed following the pattern of the two dimensional study conclusions. It will respond to the geometrical relationships that have been considered to show the better aerodynamic behavior. This box-wing model will be studied in the aim of comparing the advantages and disadvantages between this biplane configuration and the plane configuration, looking for implementing the box-wing in the UAV?s field. Although the box wing configuration has been used in a small number of existing UAV, prestigious researchers have found it as a field of high aerodynamic and structural potential.

Optical characterisation of semi-transparent PV modules for building integration

A complete characterisation of PV modules for building integration is needed in order to know their influence on the building’s global energy balance. Specifically, certain characteristic parameters should be obtained for each different PV module suitable for building integrated photovoltaics (BIPV), some by direct or indirect measurements at the laboratory, and others by monitoring the element performance mounted in real operating conditions. In the case of transparent building envelopes it is particularly important to perform an optical and thermal characterization of the PV modules that would be integrated in them. This paper addresses the optical characterization of some commercial thin-film PV modules having different degrees of transparency, suitable for building integration in façades. The approach is based on the measurement of the spectral UV/Vis/NIR reflectance and transmittance of the different considered samples, both at normal incidence and as a function of the angle of incidence. With the obtained results, the total and zoned UV, visible and NIR transmission and reflection values are calculated, enabling the correct characterization of the PV modules integrated in façades and the subsequent evaluation of their impact over the electrical, thermal and lighting performance in a building.

Storage requirements for PV power ramp-rate control

Short-term variability in the power generated by large grid-connected photovoltaic (PV) plants can negatively affect power quality and the network reliability. New grid-codes require combining the PV generator with some form of energy storage technology in order to reduce short-term PV power fluctuation. This paper proposes an effective method in order to calculate, for any PV plant size and maximum allowable ramp-rate, the maximum power and the minimum energy storage requirements alike. The general validity of this method is corroborated with extensive simulation exercises performed with real 5-s one year data of 500 kW inverters at the 38.5 MW Amaraleja (Portugal) PV plant and two other PV plants located in Navarra (Spain), at a distance of more than 660 km from Amaraleja.

A comparative analysis of configurations of linear Fresnel collectors for concentrating solar power

Linear Fresnel collector arrays present some relevant advantages in the domain of concentrating solar power because of their simplicity, robustness and low capital cost. However, they also present important drawbacks and limitations, notably their average concentration ratio, which seems to limit significantly the performance of these systems. First, the paper addresses the problem of characterizing the mirror field configuration assuming hourly data of a typical year, in reference to a configuration similar to that of Fresdemo. For a proper comparative study, it is necessary to define a comparison criterion. In that sense, a new variable is defined, the useful energy efficiency, which only accounts for the radiation that impinges on the receiver with intensities above a reference value. As a second step, a comparative study between central linear Fresnel reflectors and compact linear Fresnel reflectors is carried out. This analysis shows that compact linear Fresnel reflectors minimize blocking and shading losses compared to a central configuration. However this minimization is not enough to overcome other negative effects of the compact Fresnel collectors, as the greater dispersion of the rays reaching the receiver, caused by the fact that mirrors must be located farther from the receiver, which yields to lower efficiencies.

Fast ignition driven by quasi-monoenergetic ions: Optimal ion type and reduction of ignition energies with an ion beam array

Fast ignition of inertial fusion targets driven by quasi-monoenergetic ion beams is investigated by means of numerical simulations. Light and intermediate ions such as lithium, carbon, aluminum and vanadium have been considered. Simulations show that the minimum ignition energies of an ideal configuration of compressed Deuterium-Tritium are almost independent on the ion atomic number. However, they are obtained for increasing ion energies, which scale, approximately, as Z2, where Z is the ion atomic number. Assuming that the ion beam can be focused into 10 ?m spots, a new irradiation scheme is proposed to reduce the ignition energies. The combination of intermediate Z ions, such as 5.5 GeV vanadium, and the new irradiation scheme allows a reduction of the number of ions required for ignition by, roughly, three orders of magnitude when compared with the standard proton fast ignition scheme.

Translocation and Functional Analysis of Pseudomonas savastanoi pv. savastanoi NCPPB 3335 Type III Secretion System Effectors Reveals Two Novel Effector Families of the Pseudomonas syringae Complex

Pseudomonas savastanoi pv. savastanoi NCPPB 3335 causes olive knot disease and is a model pathogen for exploring bacterial infection of woody hosts. The type III secretion system (T3SS) effector repertoire of this strain includes 31 effector candidates plus two novel candidates identified in this study which have not been reported to translocate into plant cells. In this work, we demonstrate the delivery of seven NCPPB 3335 effectors into Nicotiana tabacum leaves, including three proteins from two novel families of the P. syringae complex effector super-repertoire (HopBK and HopBL), one of which comprises two proteins (HopBL1 and HopBL2) that harbor a SUMO protease domain. When delivered by P. fluorescens heterologously expressing a P. syringae T3SS, all seven effectors were found to suppress the production of defense-associated reactive oxygen species. Moreover, six of these effectors, including the truncated versions of HopAA1 and HopAZ1 encoded by NCPPB 3335, suppressed callose deposition. The expression of HopAZ1 and HopBL1 by functionally effectorless P. syringae pv. tomato DC3000D28E inhibited the hypersensitive response in tobacco and, additionally, expression of HopBL2 by this strain significantly increased its competitiveness in N. benthamiana. DNA sequences encoding HopBL1 and HopBL2 were uniquely detected in a collection of 31 P. savastanoi pv. savastanoi strains and other P. syringae strains isolated from woody hosts, suggesting a relevant role of these two effectors in bacterial interactions with olive and other woody plants.

An autostereoscopic device for mobile applications based on a liquid crystal microlens array and an OLED display

In recent years, many experimental and theoretical research groups worldwide have actively worked on demonstrating the use of liquid crystals (LCs) as adaptive lenses for image generation, waveform shaping, and non-mechanical focusing applications. In particular, important achievements have concerned the development of alternative solutions for 3D vision. This work focuses on the design and evaluation of the electro-optic response of a LC-based 2D/3D autostereoscopic display prototype. A strategy for achieving 2D/3D vision has been implemented with a cylindrical LC lens array placed in front of a display; this array acts as a lenticular sheet with a tunable focal length by electrically controlling the birefringence. The performance of the 2D/3D device was evaluated in terms of the angular luminance, image deflection, crosstalk, and 3D contrast within a simulated environment. These measurements were performed with characterization equipment for autostereoscopic 3D displays (angular resolution of 0.03 ).

Broadband active differential array for the mid-frequency SKA band

This paper presents the design and characterization process of an active array demonstrator for the mid-frequency range (i.e., 300 MHz-1000 MHz) of the future Square Kilometre Array (SKA) radio telescope. This demonstrator, called FIDA3 (FG-IGN: Fundación General Instituto Geográfico Nacional - Differential Active Antenna Array), is part of the Spanish contribution for the SKA project. The main advantages provided by this design include the use of a dielectric-free structure, and the use of a fully-differential receiver in which differential low-noise amplifiers (LNAs) are directly connected to the balanced tapered-slot antennas (TSAs). First, the radiating structure and the differential low-noise amplifiers were separately designed and measured, obtaining good results (antenna elements with low voltage standing-wave ratios, array scanning capabilities up to 45°, and noise temperatures better than 52 K with low-noise amplifiers at room temperature). The potential problems due to the differential nature of the proposed solution are discussed, so some effective methods to overcome such limitations are proposed. Second, the complete active antenna array receiving system was assembled, and a 1 m2 active antenna array tile was characterized.

Virtual restoration of the sound of the Hispanic Rite

The virtual acoustic reality techniques are powerful tools for the recovery of acoustical heritage of historic buildings. Through the acoustic modeling and auralization techniques it´s possible to reconstruct the sound of disappeared buildings or the ones with significant modifications over the years, knowing the original geometry and the acoustic characteristics of their surfaces. This paper shows the results of a research project whose goal is the virtual recovery of the sound of the Hispanic Rite, the rite celebrated by Christians of the Iberian Peninsula before the imposition of the Roman Rite in the mid-eleventh century. For this purpose, acoustic models of a series of Pre-Romanesque churches were made. These acoustic models represent the churches in their original state, following the reconstruction hypothesis proposed by leading researchers in medieval liturgical archeology. Multichannel anechoic recordings of several pieces of the music of the Hispanic Rite have been carried out using a spherical array composed of 31 microphones. Finally, static and dynamic auralizations have been developed, involving the different liturgical configurations which were usual in this rite.

Equipment and procedures for ON-SITE testing of PV plants and BIPV

Actual system performance of a PV system can differ from its expected behaviour.. This is the main reason why the performance of PV systems should be monitored, analyzed and, if needed, improved on. Some of the current testing procedures relating to the electrical behaviour of PV systems are appropriated for detecting electrical performance losses, but they are not well-suited to reveal hidden defects in the modules of PV plants and BIPV, which can lead to future losses. This paper reports on the tests and procedures used to evaluate the performance of PV systems, and especially on a novel procedure for quick on-site measurements and defect recognition caused by overheating in PV modules located in operating PV installations.

3D simulation of complex shading affecting PV systems taking benefit from the power of graphics cards developed for the video game industry

Shading reduces the power output of a photovoltaic (PV) system. The design engineering of PV systems requires modeling and evaluating shading losses. Some PV systems are affected by complex shading scenes whose resulting PV energy losses are very difficult to evaluate with current modeling tools. Several specialized PV design and simulation software include the possibility to evaluate shading losses. They generally possess a Graphical User Interface (GUI) through which the user can draw a 3D shading scene, and then evaluate its corresponding PV energy losses. The complexity of the objects that these tools can handle is relatively limited. We have created a software solution, 3DPV, which allows evaluating the energy losses induced by complex 3D scenes on PV generators. The 3D objects can be imported from specialized 3D modeling software or from a 3D object library. The shadows cast by this 3D scene on the PV generator are then directly evaluated from the Graphics Processing Unit (GPU). Thanks to the recent development of GPUs for the video game industry, the shadows can be evaluated with a very high spatial resolution that reaches well beyond the PV cell level, in very short calculation times. A PV simulation model then translates the geometrical shading into PV energy output losses. 3DPV has been implemented using WebGL, which allows it to run directly from a Web browser, without requiring any local installation from the user. This also allows taken full benefits from the information already available from Internet, such as the 3D object libraries. This contribution describes, step by step, the method that allows 3DPV to evaluate the PV energy losses caused by complex shading. We then illustrate the results of this methodology to several application cases that are encountered in the world of PV systems design. Keywords: 3D, modeling, simulation, GPU, shading, losses, shadow mapping, solar, photovoltaic, PV, WebGL

Cross Ventilation CFD Modeling: Characterization and Study of Different Façade Openings Configurations at the Refurbishment of a Residential Building in Málaga (Spain)

The opening of new windows on the façade is proposed as a refurbishment strategy in an existing building in Málaga to facilitate cross ventilation of dwellings. The building is a residential block of 140 public housing units for rent for people with low income in Málaga (Spain), property of the City Council. By modeling with Computational Fluid Dynamics (CFD), eleven configurations of openings are studied in two different areas of the main housing type of the building. The quantity of introduced/extracted air into/from the room and the generated airflow patterns are obtained. The modeling allows comparing the different openings configurations to determine the most appropriate ventilation option for every room.