Molecular discrimination of pouched four-eyed opossums from the Mamirauá Reserve in the Brazilian Amazon

Previous cytochrome B (CytB) mtDNA studies have suggested four species for the opossum genus Philander (four-eyed opossums), three (P. mcilhennyi, P. andersoni and P. opossum) from the Amazon and one (P. frenata) from the Brazilian Atlantic forest. During a faunal survey nine specimens of Philander sp. and four of Didelphis marsupialis were collected in the Mamirauá Sustainable Reserve, Amazonas State, Brazil. Preliminary analyses based on morphology and geographical distributions were not conclusive, suggesting that Philander specimens could belong to either P. andersoni or P. opossum. In order to elucidate the relationship of this taxon to the remaining Amazonian taxa, seven Philander and two Didelphis specimens animals were sequenced for the cytB mtDNA gene and compared to other previously studied taxa. The maximum likelihood (ML), neighbor-Joining (NJ) and maximum parsimony (MP) consensus bootstrap trees depicted six groups: Didelphis., P. frenata, P andersoni, P. mcilhennyi, P.o. opossum and Philander sp. and Philander canus in a common assemblage supported by significant bootstrap values, suggesting that the Philander sp. from Mamiraua in fact belongs to the species Philander canus.

Mercury toxicity in the Amazon: contrast sensitivity and color discrimination of subjects exposed to mercury

We measured visual performance in achromatic and chromatic spatial tasks of mercury-exposed subjects and compared the results with norms obtained from healthy individuals of similar age. Data were obtained for a group of 28 mercury-exposed subjects, comprising 20 Amazonian gold miners, 2 inhabitants of Amazonian riverside communities, and 6 laboratory technicians, who asked for medical care. Statistical norms were generated by testing healthy control subjects divided into three age groups. The performance of a substantial proportion of the mercury-exposed subjects was below the norms in all of these tasks. Eleven of 20 subjects (55%) performed below the norms in the achromatic contrast sensitivity task. The mercury-exposed subjects also had lower red-green contrast sensitivity deficits at all tested spatial frequencies (9/11 subjects; 81%). Three gold miners and 1 riverine (4/19 subjects, 21%) performed worse than normal subjects making more mistakes in the color arrangement test. Five of 10 subjects tested (50%), comprising 2 gold miners, 2 technicians, and 1 riverine, performed worse than normal in the color discrimination test, having areas of one or more MacAdam ellipse larger than normal subjects and high color discrimination thresholds at least in one color locus. These data indicate that psychophysical assessment can be used to quantify the degree of visual impairment of mercury-exposed subjects. They also suggest that some spatial tests such as the measurement of red-green chromatic contrast are sufficiently sensitive to detect visual dysfunction caused by mercury toxicity.

Comparison of two computerized procedures for the assessment of color discrimination in Cebus apella

Color vision consists of the discrimination of objects based on their spectral composition. Among primates, the majority of Platyrrhini monkeys are estimated to have polymorphic and sex-linked dichromacy. The objective of this study was to compare the results produced by different equipment and software for the assessment of tri- and dichromatic conditions in one male and two female Cebus apella. Three experiments were programmed. In Experiment 1, verifying the trichromatic condition of one female subject and dichromatic condition of the remainder of the subjects was possible using an adapted version of the Cambridge Colour Test. Experiment 2 confirmed the results of Experiment 1 using a different array of stimuli of the same test. Experiment 3, which produced results similar to Experiment 2, consisted of a test developed for a standard computer system using stimuli with color properties similar to the ones used in the previous experiment. Favorable conditions for the assessment of color vision in Platyrrhini can be built with low-cost equipment and software. Once data have been gathered with additional subjects and new stimulus arrangements have been tested and confirmed, the procedure can be used for the evaluation of other Platyrrhini species for which behavioral color discrimination data are currently lacking.

Discrimination of soybean seed lots by multivariate exploratory techniques

Physiological potential characterization of seed lots is usually performed by germination and vigor tests; however, the choice of a single test does not reflect such potential, once each test assesses seeds of differentiated mode. Multivariate techniques allow understanding structural dependence contained in each variable, as well as characterize groups of seed lots according to specific standards. The study aimed at evaluating variability among soybean seed lots and discriminate these lots by multivariate exploratory techniques as function of seed vigor. Experiment was performed with 20 soybean seed lots (10 lots cv. BRS Valiosa RR and 10 lots cv. M-SOY 7908 RR). Seed physiological potential was assessed by testing for: germination (standard, and under different water availability); vigor (accelerated aging and electrical conductivity); and field seedling emergence. Cluster analysis of seed lots, as well as Principal Component Analysis was performed using data obtained on all tests. Multivariate techniques allowed stratifying seed lots into two distinct groups. Principal Component Analysis showed that values obtained for variables: field seedling emergence, accelerated aging, and germination under different water availability were linked to BRS Valiosa RR; while to variables germination and electrical conductivity, were linked to M-SOY 7908 RR.

Determination of reactivity rates of silicate particle-size fractions

The efficiency of sources used for soil acidity correction depends on reactivity rate (RR) and neutralization power (NP), indicated by effective calcium carbonate (ECC). Few studies establish relative efficiency of reactivity (RER) for silicate particle-size fractions, therefore, the RER applied for lime are used. This study aimed to evaluate the reactivity of silicate materials affected by particle size throughout incubation periods in comparison to lime, and to calculate the RER for silicate particle-size fractions. Six correction sources were evaluated: three slags from distinct origins, dolomitic and calcitic lime separated into four particle-size fractions (2, 0.84, 0.30 and <0.30-mm sieves), and wollastonite, as an additional treatment. The treatments were applied to three soils with different texture classes. The dose of neutralizing material (calcium and magnesium oxides) was applied at equal quantities, and the only variation was the particle-size material. After a 90-day incubation period, the RER was calculated for each particle-size fraction, as well as the RR and ECC of each source. The neutralization of soil acidity of the same particle-size fraction for different sources showed distinct solubility and a distinct reaction between silicates and lime. The RER for slag were higher than the limits established by Brazilian legislation, indicating that the method used for limes should not be used for the slags studied here.

Particle swarm optimization aplicada ao planejamento da expansão de sistemas de transmissão

Pós-graduação em Engenharia Elétrica - FEIS

Desenvolvimento de software utilizando a técnica sph (smoothed particle hydrodynamics) na geração de ondas de submersão

Pós-graduação em Engenharia Elétrica - FEIS

Jet and underlying event properties as a function of charged-particle multiplicity in proton-proton collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Pattern recognition issues on anisotropic smoothed particle hydrodynamics

This is a preliminary theoretical discussion on the computational requirements of the state of the art smoothed particle hydrodynamics (SPH) from the optics of pattern recognition and artificial intelligence. It is pointed out in the present paper that, when including anisotropy detection to improve resolution on shock layer, SPH is a very peculiar case of unsupervised machine learning. On the other hand, the free particle nature of SPH opens an opportunity for artificial intelligence to study particles as agents acting in a collaborative framework in which the timed outcomes of a fluid simulation forms a large knowledge base, which might be very attractive in computational astrophysics phenomenological problems like self-propagating star formation.

Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

Objectives: This study evaluated the influence of air-particle abrasion protocols on the surface roughness (SR) of zirconia and the shear bond strength (SBS) of dual-polymerized resin cement to this ceramic. Materials and methods. Sintered zirconia blocks (n = 115) (Lava, 3M ESPE) were embedded in acrylic resin and polished. The specimens were divided according to the 'particle type' (Al: 110 mu m Al2O3; Si: 110 mu m SiO2) and 'pressure' factors (2.5 or 3.5 bar) (n = 3 per group): (a) Control (no air-abrasion); (b) Al2.5; (c) Si2.5; (d) Al3.5; (e) Si3.5. SR (Ra) was measured 3-times from each specimen after 20 s of air-abrasion (distance: 10 mm) using a digital optical profilometer. Surface topography was evaluated under SEM analyses. For the SBS test, 'particle type', 'pressure' and 'thermocycling' (TC) factors were considered (n = 10; n = 10 per group): Control (no air-abrasion); Al2.5; Si2.5; Al3.5; Si3.5; Control(TC); Al2.5(TC); Si2.5(TC); Al3.5(TC); Si3.5(TC). After silane application, resin cement (Panavia F2.0) was bonded and polymerized. Specimens were thermocycled (6.000 cycles, 5-55 degrees C) and subjected to SBS (1 mm/min). Data were analyzed using ANOVA, Tukey's and Dunnett tests (5%). Results. 'Particle' (p = 0.0001) and 'pressure' (p = 0.0001) factors significantly affected the SR. All protocols significantly increased the SR (Al2.5: 0.45 +/- 0.02; Si2.5: 0.39 +/- 0.01; Al3.5: 0.80 +/- 0.01; Si3.5: 0.64 +/- 0.01 mu m) compared to the control group (0.16 +/- 0.01 mu m). For SBS, only 'particle' factor significantly affected the results (p = 0.015). The SiO2 groups presented significantly higher SBS results than Al2O3 (Al2.5: 4.78 +/- 1.86; Si2.5: 7.17 +/- 2.62; Al3.5: 4.97 +/- 3.74; Si3.5: 9.14 +/- 4.09 MPa) and the control group (3.67 +/- 3.0 MPa). All TC specimens presented spontaneous debondings. SEM analysis showed that Al2O3 created damage in zirconia in the form of grooves, different from those observed with SiO2 groups. Conclusions. Air-abrasion with 110 mu m Al2O3 resulted in higher roughness, but air-abrasion protocols with SiO2 promoted better adhesion.

Phase space properties and chaotic transport for a particle moving in a time dependent step potential well

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Particle-vortex and Maxwell duality in the AdS(4) x CP3/ABJM correspondence

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Single-Particle Momentum Distributions for Bosonic Trimer States in Two and Three Dimensions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Particle creation in a f(R) theory with cosmological constraints

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

EVALUATION OF ROUGHNESS, WETTABILITY, AND MORPHOLOGY OF AN YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTAL CERAMIC AFTER DIFFERENT AIRBORNE-PARTICLE ABRASION PROTOCOL

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)