Characterisation factors for life cycle impact assessment of sound emissions

abstract to be added by authors

Modeled uncertainties in marine N2O emissions with links to source files (52 MB, zipped)

The ocean is responsible for up to a third of total global nitrous oxide (N2O) emissions, but uncertainties in emission rates of this potent greenhouse gas are high (>100%). Here we use a marine biogeochemical model to assess six major uncertainties in estimates of N2O production, thereby providing guidance in how future studies may most effectively reduce uncertainties in current and future marine N2O emissions. Potential surface N2O production from nitrification causes the largest uncertainty in N2O emissions (estimated up to ~1.6 Tg N/yr, or 48% of modeled values), followed by the unknown oxygen concentration at which N2O production switches to N2O consumption (0.8 Tg N/yr, or 24% of modeled values). Other uncertainties are minor, cumulatively changing regional emissions by <15%. If production of N2O by surface nitrification could be ruled out in future studies, uncertainties in marine N2O emissions would be halved.

Anthropogenic aerosol emissions and rainfall decline in South-West Australia - accompanying model results in NetCDF format

It is commonly understood that the observed decline in precipitation in South-West Australia during the 20th century is caused by anthropogenic factors. Candidates therefore are changes to large-scale atmospheric circulations due to global warming, extensive deforestation and anthropogenic aerosol emissions - all of which are effective on different spatial and temporal scales. This contribution focusses on the role of rapidly rising aerosol emissions from anthropogenic sources in South-West Australia around 1970. An analysis of historical longterm rainfall data of the Bureau of Meteorology shows that South-West Australia as a whole experienced a gradual decline in precipitation over the 20th century. However, on smaller scales and for the particular example of the Perth catchment area, a sudden drop in precipitation around 1970 is apparent. Modelling experiments at a convection-resolving resolution of 3.3km using the Weather and Research Forecasting (WRF) model version 3.6.1 with the aerosol-aware Thompson-Eidhammer microphysics scheme are conducted for the period 1970-1974. A comparison of four runs with different prescribed aerosol emissions and without aerosol effects demonstrates that tripling the pre-1960s atmospheric CCN and IN concentrations can suppress precipitation by 2-9%, depending on the area and the season. This suggests that a combination of all three processes is required to account for the gradual decline in rainfall seen for greater South-West Australia and for the sudden drop observed in areas along the West Coast in the 1970s: changing atmospheric circulations, deforestation and anthropogenic aerosol emissions.

Carbon dioxide emissions and international trade at the turn of the millennium

We present a new dataset of geographical production-, final (embodied) production-, and consumption-based carbon dioxide emission inventories, covering 78 regions and 55 sectors from 1997 to 2011. We extend previous work both in terms of time span and in bridging from geographical to embodied production and, ultimately, to consumption. We analyse the recent evolution of emissions, the development of carbon efficiency of the global economy, and the role of international trade. As the distribution of responsibility for emissions across countries is key to the adoption and implementation of international environmental agreements and regulations, the final production- and consumption-based inventories developed here provide a valuable extension to more traditional geographical production-based criteria.

China's inter-regional spillover of carbon emissions and domestic supply chains

In this study, we apply the inter-regional input–output model to explain the relationship between China’s inter-regional spillover of CO2 emissions and domestic supply chains for 2002 and 2007. Based on this model, we propose alternative indicators such as the trade in CO2 emissions, CO2 emissions in trade, regional trade balances, and comparative advantage of CO2 emissions. The empirical results not only reveal the nature and significance of inter-regional environmental spillover within China’s domestic regions but also demonstrate how CO2 emissions are created and distributed across regions via domestic production networks. The main finding shows that a region’s CO2 emissions depend on not only its intra-regional production technique, energy use efficiency but also its position and participation degree in domestic and global supply chains.

Tracing CO2 emissions in global value chains

This paper integrates two lines of research into a unified conceptual framework: trade in global value chains and embodied emissions. This allows both value added and emissions to be systematically traced at the country, sector, and bilateral levels through various production network routes. By combining value-added and emissions accounting in a consistent way, the potential environmental cost (amount of emissions per unit of value added) along global value chains can be estimated. Using this unified accounting method, we trace CO2 emissions in the global production and trade network among 41 economies in 35 sectors from 1995 to 2009, basing our calculations on the World Input–Output Database, and show how they help us to better understand the impact of cross-country production sharing on the environment.

Production sharing, demand spillovers and CO2 emissions : the case of Chinese regions in GVCs

This study adopts the perspective of demand spillovers to provide new insights regarding Chinese domestic-regions' production position in global value chains and their associated CO2 emissions. To this end, we constructed a new type of World Input-Output Database in which China's domestic interregional input-output table for 2007 is endogenously embedded. Then, the pattern of China's regional demand spillovers across both domestic regions and countries are revealed by employing this new database. These results were further connected to endowments theory, which help to make sense of the empirical results. It is found that China's regions locate relatively upstream in GVCs, and had CO2 emissions in net exports, which were entirely predicted by the environmental extended HOV model. Our study points to micro policy instruments to combat climate change, for example, the tax reform for energy inputs that helps to change the production pattern thus has impact on trade pattern and so forth.

A unified framework of trade in value added : physical, monetary, exchange rates, and GHG emissions

Koopman et al. (2014) developed a method to consistently decompose gross exports in value-added terms that accommodate infinite repercussions of international and inter-sector transactions. This provides a better understanding of trade in value added in global value chains than does the conventional gross exports method, which is affected by double-counting problems. However, the new framework is based on monetary input--output (IO) tables and cannot distinguish prices from quantities; thus, it is unable to consider financial adjustments through the exchange market. In this paper, we propose a framework based on a physical IO system, characterized by its linear programming equivalent that can clarify the various complexities relevant to the existing indicators and is proved to be consistent with Koopman's results when the physical decompositions are evaluated in monetary terms. While international monetary tables are typically described in current U.S. dollars, the physical framework can elucidate the impact of price adjustments through the exchange market. An iterative procedure to calculate the exchange rates is proposed, and we also show that the physical framework is also convenient for considering indicators associated with greenhouse gas (GHG) emissions.

How does firm heterogeneity information impact the estimation of embodied carbon emissions in Chinese exports?

Using an augmented Chinese input–output table in which information about firm ownership and type of traded goods are explicitly reported, we show that ignoring firm heterogeneity causes embodied CO2 emissions in Chinese exports to be overestimated by 20% at the national level, with huge differences at the sector level, for 2007. This is because different types of firm that are allocated to the same sector of the conventional Chinese input–output table vary greatly in terms of market share, production technology and carbon intensity. This overestimation of export-related carbon emissions would be even higher if it were not for the fact that 80% of CO2 emissions embodied in exports of foreign-owned firms are, in fact, emitted by Chinese-owned firms upstream of the supply chain. The main reason is that the largest CO2 emitter, the electricity sector located upstream in Chinese domestic supply chains, is strongly dominated by Chinese-owned firms with very high carbon intensity.

Consumption-based accounting of U.S. CO2 emissions from 1990 to 2010

To tackle global climate change, it is desirable to reduce CO2 emissions associated with household consumption in particular in developed countries, which tend to have much higher per capita household carbon footprints than less developed countries. Our results show that carbon intensity of different consumption categories in the U.S. varies significantly. The carbon footprint tends to increase with increasing income but at a decreasing rate due to additional income being spent on less carbon intensive consumption items. This general tendency is frequently compensated by higher frequency of international trips and higher housing related carbon emissions (larger houses and more space for consumption items). Our results also show that more than 30% of CO2 emissions associated with household consumption in the U.S. occur outside of the U.S. Given these facts, the design of carbon mitigation policies should take changing household consumption patterns and international trade into account.

Evaluation of the influence of toll systems on energy consumption and CO2 emissions: A case study of a Spanish highway

This paper studies the energy consumption and subsequent CO2 emissions of road highway transportation under three toll systems in Spain for four categories of vehicles: cars, vans, buses and articulated trucks. The influence of toll systems is tested for a section of AP-41 highway between Toledo and Madrid. One system is free flow, other is traditional stop and go and the last toll system operates with an electronic toll collection (ETC) technology. Energy consumption and CO2 emissions were found to be closely related to vehicle mass, wind exposure, engine efficiency and acceleration rate. These parameters affect, directly or indirectly, the external forces which determine the energy consumption. Reducing the magnitude of these forces through an appropriate toll management is an important way of improving the energy performance of vehicles. The type of toll system used can have a major influence on the energy efficiency of highway transportation and therefore it is necessary to consider free flow.

Environmental analysis of residential building facades through energy consumption, GHG emissions and costs

This paper provides some results on the potential to minimize environmental impacts in residential buildings life cycle, through façade design strategies, analyzing also their impact on costs from a lifecycle perspective. On one hand, it assesses the environmental damage produced by the materials of the building envelope, and on the other, the benefits they offer in terms of habitability and liveability in the use phase. The analysis includes several design parameters used both for rehabilitation of existing facades, as for new facades, trying to cover various determinants and proposing project alternatives. With this study we intended to contribute to address the energy challenges for the coming years, trying also to propose pathways for innovative solutions for the building envelope.

Influence of driving style on fuel consumption and Emissions in diesel-powered passenger car

This paper presents the main results of a study on the influence of driving style on fuel consumption and pollutant emissions of diesel passenger car in urban traffic. Driving styles (eco, normal or aggressive) patterns were based on the “eco-driving” criteria. The methodology is based on on-board emission measurements in real urban traffic in the city of Madrid. Five diesel passenger cars, have been tested. Through a statistical analysis, a Dynamic Performance Index was defined for diesel passenger cars. Likewise, the CO, NOX and HC emissions were compared for each driving style for the tested vehicles. Eco-driving reduces by 14% fuel consumption and CO2 emissions, but aggressive driving increase consumption by 40%. Aggressive driving increases NOX emission by more than 40%. CO and HC, show different trends, but being increased in eco-driving style.

Proposal of a dynamic performance index to analyze driving pattern effect on car emissions

The contributions of driver behaviour as well as surrounding infrastructure are decisive on pollutant emissions from vehicles in real traffic situations. This article deals with the preliminary study of the interaction between the dynamic variables recorded in a vehicle (driving pattern) and pollutant emissions produced over a given urban route. It has been established a “dynamic performance index”-DPI, which is calculated from some driving pattern parameters, which in turn depends on traffic congestion level and route characteristics, in order to determine whether the driving has been aggressive, normal or calm. Two passenger cars instrumented with a portable activity measurement system -to record dynamic variables- and on-board emission measurement equipment have been used. This study has shown that smooth driving patterns can reduce up to 80% NOX emissions and up to 20% of fuel in the same route