The comparative impact of privatisation and regulation on productivity growth in the English and Welsh water and sewerage industry, 1985-99

After the 10 regional water authorities of England and Wales were privatized in November 1989, the successor WASCs (water and sewerage companies) faced a new regulatory regime that was designed to promote productivity growth while simultaneously improving drinking water and environmental quality. As legally mandated quality improvements necessitated a costly capital investment programme, the industry's economic regulator – the Office of Water Services – implemented a RPI + K pricing system, designed to compensate the WASCs for their capital investment programme while also encouraging faster rates of productivity growth. This paper considers the relative effects of privatization and regulation on productivity growth in the industry using both non-parametric and parametric methods to provide a crosscheck on the robustness of the results. While there is evidence that labour productivity improved after privatization, there is no evidence that privatization led to a growth in TFP (total factor productivity). However, there is some evidence of a small increase in the rate of TFP growth in the aftermath of a substantial tightening of the regulatory regime that took place in 1995. These results, therefore, are consistent with evidence from other research that privatization, in the absence of effective competition and/or regulation, is not necessarily associated with improved economic performance.

Is there a trade-off between quality and productivity? The case of diagnostic technologies in Portugal

The purpose of this paper is twofold: first, we compute quality-adjusted measures of productivity change for the three most important diagnostic technologies (i.e., the Computerised Tomography Scan, Electrocardiogram and Echocardiogram) in the major Portuguese hospitals. We use the Malmquist–Luenberger index, which allows to measure productivity growth while controlling for the quality of the production. Second, using non-parametric tests, we analyse whether the implementation of the Prospective Payment System may have had a positive impact on the movements of productivity over time. The results show that the PPS has helped hospitals to use these tools more efficiently and to improve their effectiveness.

Patterns of corporate governance and technical efficiency in Italian manufacturing

The purpose of this paper is to analyse the relationship between the corporate governance system and technical efficiency in Italian manufacturing. We use a non-parametric frontier technique (DEA) to derive technical efficiency measures for a sample of Italian firms taken from nine manufacturing industries. These measures are then related to the characteristics of the corporate governance system. Two of these characteristics turn out to have a positive impact on technical efficiency: the percentage of the company shares owned by the largest shareholder and the fact that a firm belongs to a pyramidal group. Interestingly, a trade-off emerges between these influences, in the sense that one is stronger in industries where the other is weaker. Copyright © 2007 John Wiley & Sons, Ltd.

Public capital and total factor productivity:new evidence from the Italian regions, 1970-98

This paper analyses the relationship between industrial total factor productivity and public capital across the 20 Italian administrative regions. It adds upon the existing literature in a number of ways: it analyses a longer period (1970-98); it allows for the role of human capital accumulation; it tests for the existence of a long-run relationship between total factor productivity and public capital (through previously suggested panel techniques) and for weak exogeneity of public capital; and it assesses the significance of public capital within a non-parametric set-up based on the Free Disposal Hull. The results confirm that public capital has a significant impact on the evolution of total factor productivity, particularly in the Southern regions. This impact is mainly ascribed to the core infrastructures (road and airports, harbours, railroads, water and electricity, telecommunications). Also, core infrastructures are weakly exogenous. © 2005 Regional Studies Association.

A cautionary note on methods of comparing programmatic efficiency between two or more groups of DMUs in data envelopment analysis

In some applications of data envelopment analysis (DEA) there may be doubt as to whether all the DMUs form a single group with a common efficiency distribution. The Mann-Whitney rank statistic has been used to evaluate if two groups of DMUs come from a common efficiency distribution under the assumption of them sharing a common frontier and to test if the two groups have a common frontier. These procedures have subsequently been extended using the Kruskal-Wallis rank statistic to consider more than two groups. This technical note identifies problems with the second of these applications of both the Mann-Whitney and Kruskal-Wallis rank statistics. It also considers possible alternative methods of testing if groups have a common frontier, and the difficulties of disaggregating managerial and programmatic efficiency within a non-parametric framework. © 2007 Springer Science+Business Media, LLC.

Programmatic efficiency comparisons between unequally sized groups of DMUs in DEA

Data envelopment analysis (DEA) is a popular non-parametric technique for determining the efficiency of a homogeneous set of decision-making units (DMUs). In many practical cases, there is some doubt if the all the DMUs form a single group with a common efficiency distribution. The Mann-Whitney rank statistic has been used in DEA both to test if two groups of DMUs come from a common efficiency distribution and also to test if the two groups have a common frontier, each of which are likely to have important but different policy implications for the management of the groups. In this paper it is demonstrated that where the Mann-Whitney rank statistic is used for the second of these it is likely to overestimate programmatic inefficiency, particularly of the smaller group. A new non-parametric statistic is proposed for the case of comparing the efficient frontiers of two groups, which overcomes the problems we identify in the use of the Mann-Whitney rank statistic for this purpose. © 2005 Operational Research Society Ltd. All rights reserved.

On the existence of visual technical patterns in the UK stock market

The aim in this paper is to replicate and extend the analysis of visual technical patterns by Lo et al. (2000) using data on the UK market. A non-parametric smoother is used to model a nonlinear trend in stock price series. Technical patterns, such as the 'head-and-shoulders' pattern, that are characterised by a sequence of turning points are identified in the smoothed data. Statistical tests are used to determine whether returns conditioned on the technical patterns are different from random returns and, in an extension to the analysis of Lo et al. (2000), whether they can outperform a market benchmark return. For the stocks in the FTSE 100 and FTSE 250 indices over the period 1986 to 2001, we find that technical patterns occur with different frequencies to each other and in different relativities to the frequencies found in the US market. Our extended statistical testing indicates that UK stock returns are less influenced by technical patterns than was the case for US stock returns.

Measurement of productivity index with dynamic DEA

Fare, Grosskopf, Norris and Zhang developed a non-parametric productivity index, Malmquist index, using data envelopment analysis (DEA). The Malmquist index is a measure of productivity progress (regress) and it can be decomposed to different components such as 'efficiency catch-up' and 'technology change'. However, Malmquist index and its components are based on two period of time which can capture only a part of the impact of investment in long-lived assets. The effects of lags in the investment process on the capital stock have been ignored in the current model of Malmquist index. This paper extends the recent dynamic DEA model introduced by Emrouznejad and Thanassoulis and Emrouznejad for dynamic Malmquist index. This paper shows that the dynamic productivity results for Organisation for Economic Cooperation and Development countries should reflect reality better than those based on conventional model.

Profitability of a sample of Portuguese bank branches and its decomposition into technical and allocative components

The efficiency literature, both using parametric and non-parametric methods, has been focusing mainly on cost efficiency analysis rather than on profit efficiency. In for-profit organisations, however, the measurement of profit efficiency and its decomposition into technical and allocative efficiency is particularly relevant. In this paper a newly developed method is used to measure profit efficiency and to identify the sources of any shortfall in profitability (technical and/or allocative inefficiency). The method is applied to a set of Portuguese bank branches first assuming long run and then a short run profit maximisation objective. In the long run most of the scope for profit improvement of bank branches is by becoming more allocatively efficient. In the short run most of profit gain can be realised through higher technical efficiency. © 2003 Elsevier B.V. All rights reserved.

Exchanging uncertainty: interoperable geostatistics?

Traditionally, geostatistical algorithms are contained within specialist GIS and spatial statistics software. Such packages are often expensive, with relatively complex user interfaces and steep learning curves, and cannot be easily integrated into more complex process chains. In contrast, Service Oriented Architectures (SOAs) promote interoperability and loose coupling within distributed systems, typically using XML (eXtensible Markup Language) and Web services. Web services provide a mechanism for a user to discover and consume a particular process, often as part of a larger process chain, with minimal knowledge of how it works. Wrapping current geostatistical algorithms with a Web service layer would thus increase their accessibility, but raises several complex issues. This paper discusses a solution to providing interoperable, automatic geostatistical processing through the use of Web services, developed in the INTAMAP project (INTeroperability and Automated MAPping). The project builds upon Open Geospatial Consortium standards for describing observations, typically used within sensor webs, and employs Geography Markup Language (GML) to describe the spatial aspect of the problem domain. Thus the interpolation service is extremely flexible, being able to support a range of observation types, and can cope with issues such as change of support and differing error characteristics of sensors (by utilising descriptions of the observation process provided by SensorML). XML is accepted as the de facto standard for describing Web services, due to its expressive capabilities which allow automatic discovery and consumption by ‘naive’ users. Any XML schema employed must therefore be capable of describing every aspect of a service and its processes. However, no schema currently exists that can define the complex uncertainties and modelling choices that are often present within geostatistical analysis. We show a solution to this problem, developing a family of XML schemata to enable the description of a full range of uncertainty types. These types will range from simple statistics, such as the kriging mean and variances, through to a range of probability distributions and non-parametric models, such as realisations from a conditional simulation. By employing these schemata within a Web Processing Service (WPS) we show a prototype moving towards a truly interoperable geostatistical software architecture.

A cost Malmquist productivity index

This paper develops a productivity index applicable when producers are cost minimisers and input prices are known. The index is inspired by the Malmquist index as extended to productivity measurement. The index developed here is defined in terms of input cost rather than input quantity distance functions. Hence, productivity change is decomposed into overall efficiency and cost technical change. Furthermore, overall efficiency change is decomposed into technical and allocative efficiency change and cost technical change into a part capturing shifts of input quantities and shifts of relative input prices. These decompositions provide a clearer picture of the root sources of productivity change. They are illustrated here in a sample of hospitals; results are computed using non-parametric mathematical programming. © 2003 Elsevier B.V. All rights reserved.

Statnote 4: what if the data are not normal?

When testing the difference between two groups, if previous data indicate non-normality, then either transform the data if they comprise percentages, integers or scores or use a non-parametric test. If there is uncertainty whether the data are normally distributed, then deviations from normality are likely to be small if the data are measurements to three significant figures. Unless there is clear evidence that the distribution is non-normal, it is more efficient to use the conventional t-tests. It is poor statistical practice to carry out both the parametric and non-parametric tests on a set of data and then choose the result that is most convenient to the investigator!

Statnote 5: Is one set of data more variable than another?

There may be circumstances where it is necessary for microbiologists to compare variances rather than means, e,g., in analysing data from experiments to determine whether a particular treatment alters the degree of variability or testing the assumption of homogeneity of variance prior to other statistical tests. All of the tests described in this Statnote have their limitations. Bartlett’s test may be too sensitive but Levene’s and the Brown-Forsythe tests also have problems. We would recommend the use of the variance-ratio test to compare two variances and the careful application of Bartlett’s test if there are more than two groups. Considering that these tests are not particularly robust, it should be remembered that the homogeneity of variance assumption is usually the least important of those considered when carrying out an ANOVA. If there is concern about this assumption and especially if the other assumptions of the analysis are also not likely to be met, e.g., lack of normality or non additivity of treatment effects then it may be better either to transform the data or to carry out a non-parametric test on the data.

Statnote 14: the correlation of two variables (Pearson's 'r')

Pearson's correlation coefficient (‘r’) is one of the most widely used of all statistics. Nevertheless, care needs to be used in interpreting the results because with large numbers of observations, quite small values of ‘r’ become significant and the X variable may only account for a small proportion of the variance in Y. Hence, ‘r squared’ should always be calculated and included in a discussion of the significance of ‘r’. The use of ‘r’ also assumes that the data follow a bivariate normal distribution (see Statnote 17) and this assumption should be examined prior to the study. If the data do not conform to such a distribution, the use of a non-parametric correlation coefficient should be considered. A significant correlation should not be interpreted as indicating ‘causation’ especially in observational studies, in which the two variables may be correlated because of their mutual correlations with other confounding variables.

Data analysis methods in optometry. Part 5: correlation

1. Pearson's correlation coefficient only tests whether the data fit a linear model. With large numbers of observations, quite small values of r become significant and the X variable may only account for a minute proportion of the variance in Y. Hence, the value of r squared should always be calculated and included in a discussion of the significance of r. 2. The use of r assumes that a bivariate normal distribution is present and this assumption should be examined prior to the study. If Pearson's r is not appropriate, then a non-parametric correlation coefficient such as Spearman's rs may be used. 3. A significant correlation should not be interpreted as indicating causation especially in observational studies in which there is a high probability that the two variables are correlated because of their mutual correlations with other variables. 4. In studies of measurement error, there are problems in using r as a test of reliability and the ‘intra-class correlation coefficient’ should be used as an alternative. A correlation test provides only limited information as to the relationship between two variables. Fitting a regression line to the data using the method known as ‘least square’ provides much more information and the methods of regression and their application in optometry will be discussed in the next article.