Electrochemistry and spectroscopy study on the interaction of microperoxidase-11 with lipid membrane

The interaction of microperoxidase-11 (MP11) with cationic lipid vesicles of didodecyldimethylammonium bromide (DDAB) induces an alpha -helical conformation from random coil conformations in solution and this change then makes heme macrocycle more distorted. DDAB-induced MP11 conformations were investigated by cyclic votammetry (CV), circular dichroism (CD) and UV-vis spectrometry. All results indicate that the binding of MP11 in solution to DDAB vesicles and the ordered structure formation are driven by mostly electrostatic interaction between negatively charged residues in the undecapeptide and positively charged lipid headgroups on the membrane surface. Upon binding to DDAB, its half-peak potential was also changed. The mechanism of the interaction between MP11 and DDAB was also discussed. (C) 2001 Elsevier Science B.V. All rights reserved.

Two dimensional nuclear magnetic resonance analysis of ruthenium-(4,4'-dimethyl-2,2'-bipyridine)(2) (2,2'-bipyridine-4,4'-dicarboxylic acid) (PF6)(2)

The (1) H and C-13 NMR spectra are reported for Ru(4, 4'-dimethyl-2,2'-bipyridene)(2) (2,2'-bipyridine-4,4'-dicarboxylic acid) (PF6)(2) that can be used as a new electrochemiluminescent probe in immunoasssay and nucleic acid hybridization assay. Because of the effect ol:Ru atom ligands and complex steric configuration, it is difficult to attribute spectra of the title molecular, By using 2D (1) H-(1) H COSY and (1) H-C-13 HETCOR method, the proton and C-13 NMR spectra are assigned completely, which provides a satisfactory method to quantitative and qualitative, analysis of the title moleculer in the further study.

Synthesis, electrochemistry, and fluorescence of two Ru(phen)(3)(2+)-based surfactants

Two new Ru(phen)(3)(2+)-based surfactants, Ru(phen)(2)(phenNHCO-C-11)(PF6)(2) and Ru(phen)(2)(phenNHCO-C-17)(PF6)(2), have been designed and synthesized, whose chemical structures were characterized by means of IR, H-1 NMR and MS. Also, electrochemistry and fluorescence of them are reported.

Synthesis, electrochemistry, fluorescence and ECL of Ru (phen)(2) (dcbpy) (PF6)(2)

A new ECL-active species, Ru (phen)(2) (dcbpy) (PF6)(2), has been designed and synthesized. Its structure was confirmed by means of IR, ESI-MS and 2D NMR. Also, its properties of electrochemistry, fluorescence and ECL are reported, which have suggested a good hope of being used in electrochemiluminescent immunoassay and nucleic acid hybridization.

[Ni(C10H8N2)(3)](2)[V4O12].11H(2)O

The crystal structure of the title compound, bis[tris(2,2'-bipyridyl-N,N')nickel(II)] cyclo-tetravanadate undecahydrate, contains a centrosymmetric [V4O12](4-) anion, which has an eight-membered ring structure formed by four VO4 tetrahedra sharing vertices, and two complex cations containing octahedrally-coordinated Ni-II ions. The anion and coordinated Ni-II ions are isolated and make up anion and cation layers, respectively. The Ni-N distances range from 2.077(3) to 2.112(2)Angstrom and the V-O distances range from 1.621(2) to 1.803(2)Angstrom.

Atomic layer deposition of copper for CMOS interconnects

This work concerns the atomic layer deposition (ALD) of copper. ALD is a technique that allows conformal coating of difficult topographies such as narrow trenches and holes or even shadowed regions. However, the deposition of pure metals has so far been less successful than the deposition of oxides except for a few exceptions. Challenges include difficulties associated with the reduction of the metal centre of the precursor at reasonable temperatures and the tendency of metals to agglomerate during the growth process. Cu is a metal of special technical interest as it is widely used for interconnects on CMOS devices. These interconnects are usually fabricated by electroplating, which requires the deposition of thin Cu seed layers onto the trenches and vias. Here, ALD is regarded as potential candidate for replacing the current PVD technique, which is expected to reach its limitations as the critical dimensions continue to shrink. This work is separated into two parts. In the first part, a laboratory-scale ALD reactor was constructed and used for the thermal ALD of Cu. In the second part, the potentials of the application of Cu ALD on industry scale fabrication were examined in a joint project with Applied Materials and Intel. Within this project precursors developed by industrial partners were evaluated on a 300 mm Applied Materials metal-ALD chamber modified with a direct RF-plasma source. A feature that makes ALD a popular technique among researchers is the possibility to produce high- level thin film coatings for micro-electronics and nano-technology with relatively simple laboratory- scale reactors. The advanced materials and surfaces group (AMSG) at Tyndall National Institute operates a range of home-built ALD reactors. In order to carry out Cu ALD experiments, modifications to the normal reactor design had to be made. For example a carrier gas mechanism was necessary to facilitate the transport of the low-volatile Cu precursors. Precursors evaluated included the readily available Cu(II)-diketonates Cu-bis(acetylacetonate), Cu-bis(2,2,6,6-tetramethyl-hepta-3,5-dionate) and Cu-bis(1,1,1,5,5,5-hexafluoacetylacetonate) as well as the Cu-ketoiminate Cu-bis(4N-ethylamino- pent-3-en-2-onate), which is also known under the trade name AbaCus (Air Liquide), and the Cu(I)- silylamide 1,3-diisopropyl-imidazolin-2-ylidene Cu(I) hexamethyldisilazide ([NHC]Cu(hmds)), which was developed at Carleton University Ottawa. Forming gas (10 % H2 in Ar) was used as reducing agent except in early experiments where formalin was used. With all precursors an extreme surface selectivity of the deposition process was observed and significant growth was only achieved on platinum-group metals. Improvements in the Cu deposition process were obtained with [NHC]Cu(hmds) compared with the Cu(II) complexes. A possible reason is the reduced oxidation state of the metal centre. Continuous Cu films were obtained on Pd and indications for saturated growth with a rate of about 0.4 Å/cycle were found for deposition at 220 °C. Deposits obtained on Ru consisted of separated islands. Although no continuous films could be obtained in this work the relatively high density of Cu islands obtained was a clear improvement as compared to the deposits grown with Cu(II) complexes. When ultra-thin Pd films were used as substrates, island growth was also observed. A likely reason for this extreme difference to the Cu films obtained on thicker Pd films is the lack of stress compensation within the thin films. The most likely source of stress compensation in the thicker Pd films is the formation of a graded interlayer between Pd and Cu by inter-diffusion. To obtain continuous Cu films on more materials, reduction of the growth temperature was required. This was achieved in the plasma assisted ALD experiments discussed in the second part of this work. The precursors evaluated included the AbaCus compound and CTA-1, an aliphatic Cu-bis(aminoalkoxide), which was supplied by Adeka Corp.. Depositions could be carried out at very low temperatures (60 °C Abacus, 30 °C CTA-1). Metallic Cu could be obtained on all substrate materials investigated, but the shape of the deposits varied significantly between the substrate materials. On most materials (Si, TaN, Al2O3, CDO) Cu grew in isolated nearly spherical islands even at temperatures as low as 30 °C. It was observed that the reason for the island formation is the coalescence of the initial islands to larger, spherical islands instead of forming a continuous film. On the other hand, the formation of nearly two-dimensional islands was observed on Ru. These islands grew together forming a conductive film after a reasonably small number of cycles. The resulting Cu films were of excellent crystal quality and had good electrical properties; e.g. a resistivity of 2.39 µΩ cm was measured for a 47 nm thick film. Moreover, conformal coating of narrow trenches (1 µm deep 100/1 aspect ratio) was demonstrated showing the feasibility of the ALD process.

Mechanism of Shear Thickening in Reversibly Cross-linked Supramolecular Polymer Networks.

We report here the nonlinear rheological properties of metallo-supramolecular networks formed by the reversible cross-linking of semi-dilute unentangled solutions of poly(4-vinylpyridine) (PVP) in dimethyl sulfoxide (DMSO). The reversible cross-linkers are bis-Pd(II) or bis-Pt(II) complexes that coordinate to the pyridine functional groups on the PVP. Under steady shear, shear thickening is observed above a critical shear rate, and that critical shear rate is experimentally correlated with the lifetime of the metal-ligand bond. The onset and magnitude of the shear thickening depend on the amount of cross-linkers added. In contrast to the behavior observed in most transient networks, the time scale of network relaxation is found to increase during shear thickening. The primary mechanism of shear thickening is ascribed to the shear-induced transformation of intrachain cross-linking to interchain cross-linking, rather than nonlinear high tension along polymer chains that are stretched beyond the Gaussian range.

Self-assembled triple helicates with preferential helicity

The enantiomerically pure ligands LRR and LSS (N,N'-bis(-2,2'-bipyridyl-5-yl)carbonyl-(1S/R,2S/R)-(+/-)-1,2-diaminocyclohexane) have been synthesised by linking two 2,2'-bipyridine units by (R,R)- and (S,S)-1,2-diaminocyclohexane respectively. The crystal structure confirmed that the ligand had a twisted orientation between the two chelating units. The reaction of LRR and LSS with Fe(II), Co(III), Cd(II) and Zn(II) afforded dinuclear complexes confirmed by ES mass spectroscopy. CD spectroscopy indicated that the chiral diaminocyclohexane conferred helicity to the metal centre giving a dominant triple helicate diastereoisomer, with the LRR ligand giving a delta-configuration of each metal centre (P helicate) and the LSS ligand a lambda configuration (M helicate). 1H NMR spectroscopy confirmed a dominant major diastereoisomer with cadmium. The Zn(II) and Cd(II) complexes however were observed to undergo rapid ligand dissociation in solution.

Task-specific ionic liquid for solubilizing metal oxides

Protonated betaine bis(trifluoromethylsulfonyl) imide is an ionic liquid with the ability to dissolve large quantities of metal oxides. This metal-solubilizing power is selective. Soluble are oxides of the trivalent rare earths, uranium(VI) oxide, zinc(II) oxide, cadmium( II) oxide, mercury( II) oxide, nickel( II) oxide, copper(II) oxide, palladium(II) oxide, lead(II) oxide, manganese( II) oxide, and silver( I) oxide. Insoluble or very poorly soluble are iron(III), manganese(IV), and cobalt oxides, as well as aluminum oxide and silicon dioxide. The metals can be stripped from the ionic liquid by treatment of the ionic liquid with an acidic aqueous solution. After transfer of the metal ions to the aqueous phase, the ionic liquid can be recycled for reuse. Betainium bis( trifluoromethylsulfonyl) imide forms one phase with water at high temperatures, whereas phase separation occurs below 55.5 degrees C ( temperature switch behavior). The mixtures of the ionic liquid with water also show a pH-dependent phase behavior: two phases occur at low pH, whereas one phase is present under neutral or alkaline conditions. The structures, the energetics, and the charge distribution of the betaine cation and the bis( trifluoromethylsulfonyl) imide anion, as well as the cation-anion pairs, were studied by density functional theory calculations.

Argilas aniónicas multifuncionais

O presente trabalho aborda a imobilização de vários complexos do tipo dioxomolibdénio(VI), dioxotungsténio(VI) e de cobre(II) em suportes do tipo hidróxidos duplos lamelares (LDHs). Numa primeira parte descrevem-se os suportes LDHs e a síntese e caracterização em solução e estado sólido de complexos catecolato cis-MoO2 e cis-WO2. Investigou-se depois a química de intercalação deste tipo de complexos, nomeadamente a influência dos LDHs percursores, temperatura de intercalação, excesso de anião e mudança de metal no complexo intercalado (M=Mo, W). De seguida foi estudada a imobilização de oxocomplexos de molibdénio(VI) num LDH com pilares de bipiridina dicarboxilato e procedeu-se à avaliação da sua aplicabilidade em reacções catalíticas de oxidação de álcoois e olefinas. Com o objectivo de desenvolver as aplicações dos LDHs com pilares foi estudada a imobilização de um complexo de cobre(II) neste material e avaliada a sua aplicação como catalizador na oxidação de substratos orgânicos.

Síntese e potenciais aplicações de novas porfirinas β-funcionalizadas

Neste trabalho é descrita a síntese de novos derivados porfirínicos com potencial aplicação em terapia fotodinâmica (PDT) e como quimiossensores para o reconhecimento molecular de catiões metálicos. Os novos compostos foram preparados usando como “template” 2-formil-5,10,15,20-tetrafenilporfirina através de diferentes abordagens sintéticas, tais como, reações de cicloadição 1,3-dipolar ou reações do tipo condensação aldólica. Depois de uma breve introdução sobre porfirinas segue-se no capítulo 2 a descrição dos estudos de formilação de Vilsmeier-Haack dos complexos de Ni(II) e Cu(II) de meso-tetra-arilporfirinas realizados usando irradiação de microondas. Utilizando os complexos de Ni(II) e Cu(II) da 5,10,15,20-tetrafenilporfirina foram considerados vários solventes, potências de irradiação e tempos de reação; as melhores condições encontradas foram aplicadas a outras mesotetra- arilporfirinas. Os derivados formilados resultantes da reação de formilação de Vilsmeier-Haack com irradiação de micro-ondas foram isolados em bons rendimentos e com significativa redução no tempo de reação, que passou de horas, em condiçoes clássicas de aquecimento, para minutos sob irradiação de micro-ondas. O “scale-up” da reação, nas condições estabelecidas, mostrou ser eficiente não sendo a reação afetada pelo aumento da quantidade de porfirina. O capítulo 3 descreve a reação de ciclo-adição 1,3-dipolar de meso-tetraarilporfirinas com iminas de nitrilo, geradas in situ por desidrobromação de hidrazono-α-bromoglioxilatos de etilo na presença de base. A reação de iminas de nitrilo com 5,10,15,20-tetraquis(pentafluorofenil)porfirina, na presença de K2CO3 em tolueno a refluxo, permitiu isolar novas pirazoloclorinas em rendimentos moderados. Foram investigadas as propriedades fotofísicas das novas clorinas e os resultados sugerem que duas delas apresentam potencialidades para serem utilizadas em PDT. Este tipo de reações foi estendida ao complexo 2-vinil-5,10,15,20- tetrafenilporfirinatozinco(II); este complexo reagiu com as iminas de nitrilo obtendo-se os correspondentes derivados porfirina-pirazolina em rendimentos que variaram entre valores de bom e de excelente. A regioquímica dos derivados porfirina-pirazolina formados foi elucidada por RMN e confirmada por difração de raios-X. O tratamento dos derivados porfirina-pirazolina com DDQ proporciona os correspondentes derivados porfirina-pirazol com rendimentos de moderados a excelentes. Quando os derivados porfirina-pirazolina foram submetidos a condições de hidrólise básica, observou-se não só a hidrólise do grupo éster presente no anel pirazolínico mas também a concomitante oxidação desta unidade heterocíclica, isolando-se assim, num único passo reacional, novos derivados de tipo porfirinapirazol com um grupo carboxílico. A descomplexação dos complexos de Zn(II) foi realizada na presença de TFA, tendo-se isolado quantitativamente os respetivos derivados na forma de bases livres.Foram estudadas algumas das propriedades fotofísicas de todos os compostos obtidos, quer na forma de complexos de Zn(II), quer na forma de base livre. Duma forma geral, todos os compostos preparados mostraram ser bons geradores de oxigénio singleto, o que os torna interessantes para possível utilização como fotossensibilizadores em PDT. No capítulo 4 é descrita a reação de 2-formil-5,10,15,20-tetrafenilporfirina com aril-cetonas e acetato de amónio, na presença de La(OTf)3, o que permitiu isolar novas benzoporfirinas e 2-(2,6-diarilpiridina-4-il)porfirinas. Esta metodologia foi utilizada para preparar, pela primeira vez, uma 2-(2,2':6,2''- terpiridin-4-il)porfirina. As estruturas de duas das 2-(2,6-diarilpiridin-4- il)porfirinas foram confirmadas por difração de raios-X de cristal único. A metodologia descrita permite ainda preparar novos derivados de tipo porfirinacalcona, apenas com pequenos ajustes nas condições reacionais através de uma reação do tipo condensação aldólica. Os derivados do tipo porfirinacalcona foram posteriormente usados para preparar derivados do tipo porfirinapirazol 1,3,5-tri-substituídos em bons rendimentos, através de reação de condensação com fenil-hidrazina. Em cada um dos capítulos é descrito os procedimentos experimentais e a caracterização espectroscópica (RMN, UV-vis e massa) dos novos compostos isolados. Em alguns casos foi necessário o recurso a técnicas de RMN bidimensionais como COSY, NOESY, HSQC e HMBC. Os compostos preparados neste trabalho foram ainda objecto de estudos de avaliação das respetivas potencialidades para actuarem como quimiossensores para o reconhecimento de catiões metálicos, nomeadamente, Cu(II), Ag(I), Zn(II), Cd(II) e Hg(II). Assim no capítulo 5 é descrita a caracterização fotofísica dos compostos preparados no capítulo 4 e, os estudos destes como potenciais quimiossensores. Os estudos para verificar a potencialidade dos compostos como quimiossensores foram efectuados: i) em solução, através de titulações espectrofotométricas e espectrofluorimétricas, ii) no estado sólido, recorrendo à preparação de filmes de PMMA dopados com os ligandos porfirínicos em estudo e, iii) na fase gasosa, seguindo as titulações dos ligandos com metais por espectrometria de massa (MALDI-TOF-MS). Os compostos estudados mostraram ter capacidade para atuarem como quimiossensores de catiões metálicos capazes de distinguirem entre os iões Zn(II) e Hg(II).

Ditopic molecular architectures for the recognition of anionic species

Dissertation presented to obtain the Ph.D degree in Chemistry

Arsenic and germanium determination by hydride generation in the D.C. plasma optical emission spectrometer

Modifications to the commercial hydride generator, manufactured by Spectrametrics, resulted in improved operating procedure and enhancement of the arsenic and germanium signals. Experiments with arsenic(III) and arsenic(V) showed that identical reiults could be produced from both oxidation states. However, since arsenic(V) is reduced more slowly than arsenic(III), peak areas and not peak heights must be measured when the arsine is immediately stripped from the system (approximately 5 seconds reaction). When the reduction is allowed to proceed for 20 seconds before the arsine is stripped, peak heights may be used. For a 200 ng/mL solution, the relative standard deviation is 2.8% for As(III) and 3.8% for As(V). The detection limit for arsenic using the modified system is 0.50 ng/mL. Studies performed on As(V) standards show that the interferences from 1000 mg/L of nickel(II), cobalt(II), iron(III), copper(II), cadmium(II), and zinc(II) can be eliminated with the aid of 5 M Hel and 3% L-cystine. Conditions for the reduction of germanium to the corresponding hydride were investigated. The effect of different concentrations of HCl on the reduction of germanium to the covalent hydride in aqueous media by means of NaBH 4 solutions was assessed. Results show that the best response is accomplished at a pH of 1.7. The use of buffer solutions was similarly characterized. In both cases, results showed that the element is best reduced when the final pH of the solution after reaction is almost neutral. In addition, a more sensitive method, which includes the use of (NH4)2S208' has been developed. A 20% increase in the germanium signal is registered when compared to the signal achieved with Hel alone. Moreover, under these conditions, reduction of germanium could be accomplished, even when the solution's pH is neutral. For a 100 ng/mL germanium standard the rsd is 3%. The detection limit for germanium in 0.05 M Hel medium (pH 1.7) is 0.10 ng/mL and 0.09 ng/mL when ammonium persulphate is used in conjunction with Hel. Interferences from 1000 mg/L of iron(III), copper(II), cobalt(II), nickel(II), cadmium(II), lead(II), mercury(II), aluminum(III), tin(IV), arsenic(III), arsenic(V) and zinc(II) were studied and characterized. In this regard, the use of (NH4)ZS20S and Hel at a pH of 1.7 proved to be a successful mixture in the sbppression of the interferences caused by iron, copper, aluminum, tin, lead, and arsenic. The method was applied to the determination of germanium in cherts and iron ores. In addition, experiments with tin(IV) showed that a 15% increase in the tin signal can be accomplished in the presence of 1 mL of (NH4)2S20S 10% (m/V).

Investigation into the determination of arsenic by direct current plasma atomic emission spectrometer

Improvements have been made on the currently available hydride generator system manufactured by SpectraMetrics Incorporated, because the system was found to be unsatisfactory with respect to the following: 1. the drying agent, anhydrous calcium chloride, 2. the special sample tube, 3. the direction of argon flow through the Buchner funnel when it came to dealing with real sample, that is, with reference only to aqueous extracts of soil samples. Changes that were made on the system included the replacement of anhydrous calcium chloride with anhydrous calcium sulphate and the replacement of the special sample tube with a modified one made from silica. Re-directing the flow of argon through the top of the Buchner funnel appeared to make the system compatible with aqueous extracts of soil samples. The interferences from 1000 ~g/mL of nickel(II) , cobalt(II), iron(III), copper(II) have been eliminated with the aid of 1.4 M hydrochloric acid and 1% (weight/volume) L-cystine. Greater than 90% recovery of 0.3 ~g/mL arsenic signal was achieved in each case. Furthermore, 103% of arsenic signal was accomplished in the presence of 1000 ~g/mL cadmium with 5 M Hel. tVhen each of the interferents was present in solution at 1000 ppm, a recovery of 85% was achieved by using 5 M hydrochloric acid and 3% (weight/volume) L-cystine. Without L-cystine and when 1.4 M hydrochloric acid was used, the recoveries were 0% (Ni), 0% (Co), 88% (Fe), 15% (Cu), 18% (Cd). Similarly, a solution containing 1000 ppm of each interferent gave a zero percent recovery of arsenic. The reduction of trivalent and pentavalent arsenic at a pH less than one has also been investigated and shown to be quantitative if peak areas are measured. The reproducibility determination of a 0.3 Vg/mL standard arsenic solution by hydride generation shows a relative standard deviation of 3.4%. The detection limits with and without Porapak Q have been found to be 0.6 ng/mL and 1.0 ng/mL, respectively.

Spin labile conducting metallopolymers : a new architecture for hybrid multifunctional materials

The synthesis of 3-ethynylthienyl- (2.07), 3-ethynylterthienyl- (2.19) substituted qsal [qsalH = N-(8-quinolyl)salicylaldimine] and 3,3' -diethynyl-2,2' -bithienyl bridging bisqsal (5.06) ligands are described along with the preparation and characterization of eight cationic iron(III) complexes containing these ligands with a selection of counteranions [(2.07) with: SCN- (2.08), PF6- (2.09), and CI04- (2.10); (2.19) with PF6 - (2.20); (5.06) with: cr (5.07), SeN- (5.08), PF6- (5.09), and CI04- (5.10)]. Spin-crossover is observed in the solid state for (2.08) - (2.10) and (5.07) - (5.10), including a ve ry rare S = 5/2 to 3/2 spin-crossover in complex (2.09). The unusal reduction of complex (2.10) produces a high-spin iron(I1) complex (2.12). Six iron(II) complexes that are derived from thienyl analogues of bispicen [bispicen = bis(2-pyridylmethyl)-diamine] [2,5-thienyl substituents = H- (3.11), Phenyl- (3.12), 2- thienyl (3.13) or N-phenyl-2-pyridinalimine ligands [2,5-phenyl substituents = diphenyl (3.23), di(2-thienyl) (3.24), 4-phenyl substituent = 3-thienyl (3.25)] are reported Complexes (3.11), (3.23) and (3.25) display thermal spin-crossover in the solid state and (3.12) remains high-spin at all temperatures. Complex (3.13) rearranges to form an iron(II) complex (3.14) with temperature dependent magnetic properties be s t described as a one-dimensional ferromagnetic chain, with interchain antiferromagnetic interactions and/or ZFS dominant at low temperatures. Magnetic succeptibility and Mossbauer data for complex (3.24) display a temperature dependent mixture of spin isomers. The preparation and characterization of two cobalt(II) complexes containing 3- ethynylthienyl- (4.04) and 3-ethynylterhienyl- (4.06) substituted bipyridine ligands [(4.05): [Co(dbsqh(4.04)]; (4.07): [Co(dbsq)2(4.06)]] [dbsq = 3,5-dbsq=3,5-di-tert-butylI ,2-semiquinonate] are reported. Complexes (4.05) and (4.07) exhibit thermal valence tautomerism in the solid state and in solution. Self assembly of complex (2.10) into polymeric spheres (6.11) afforded the first spincrossover, polydisperse, micro- to nanoscale material of its kind. . Complexes (2.20), (3.24) and (4.07) also form polymers through electrochemical synthesis to produce hybrid metaUopolymer films (6.12), (6.15) and (6.16), respectively. The films have been characterized by EDX, FT-IR and UV-Vis spectroscopy. Variable-temperature magnetic susceptibility measurements demonstrate that spin lability is operative in the polymers and conductivity measurements confirm the electron transport properties. Polymer (6.15) has a persistent oxidized state that shows a significant decrease in electrical resistance.