Constraint solving over multi-valued logics - application to digital circuits

Due to usage conditions, hazardous environments or intentional causes, physical and virtual systems are subject to faults in their components, which may affect their overall behaviour. In a ‘black-box’ agent modelled by a set of propositional logic rules, in which just a subset of components is externally visible, such faults may only be recognised by examining some output function of the agent. A (fault-free) model of the agent’s system provides the expected output given some input. If the real output differs from that predicted output, then the system is faulty. However, some faults may only become apparent in the system output when appropriate inputs are given. A number of problems regarding both testing and diagnosis thus arise, such as testing a fault, testing the whole system, finding possible faults and differentiating them to locate the correct one. The corresponding optimisation problems of finding solutions that require minimum resources are also very relevant in industry, as is minimal diagnosis. In this dissertation we use a well established set of benchmark circuits to address such diagnostic related problems and propose and develop models with different logics that we formalise and generalise as much as possible. We also prove that all techniques generalise to agents and to multiple faults. The developed multi-valued logics extend the usual Boolean logic (suitable for faultfree models) by encoding values with some dependency (usually on faults). Such logics thus allow modelling an arbitrary number of diagnostic theories. Each problem is subsequently solved with CLP solvers that we implement and discuss, together with a new efficient search technique that we present. We compare our results with other approaches such as SAT (that require substantial duplication of circuits), showing the effectiveness of constraints over multi-valued logics, and also the adequacy of a general set constraint solver (with special inferences over set functions such as cardinality) on other problems. In addition, for an optimisation problem, we integrate local search with a constructive approach (branch-and-bound) using a variety of logics to improve an existing efficient tool based on SAT and ILP.

An improved preemption delay upper bound for floating non-preemptive region

In embedded systems, the timing behaviour of the control mechanisms are sometimes of critical importance for the operational safety. These high criticality systems require strict compliance with the offline predicted task execution time. The execution of a task when subject to preemption may vary significantly in comparison to its non-preemptive execution. Hence, when preemptive scheduling is required to operate the workload, preemption delay estimation is of paramount importance. In this paper a preemption delay estimation method for floating non-preemptive scheduling policies is presented. This work builds on [1], extending the model and optimising it considerably. The preemption delay function is subject to a major tightness improvement, considering the WCET analysis context. Moreover more information is provided as well in the form of an extrinsic cache misses function, which enables the method to provide a solution in situations where the non-preemptive regions sizes are small. Finally experimental results from the implementation of the proposed solutions in Heptane are provided for real benchmarks which validate the significance of this work.

Multi-criteria optimization manipulator trajectory planning

In the last twenty years genetic algorithms (GAs) were applied in a plethora of fields such as: control, system identification, robotics, planning and scheduling, image processing, and pattern and speech recognition (Bäck et al., 1997). In robotics the problems of trajectory planning, collision avoidance and manipulator structure design considering a single criteria has been solved using several techniques (Alander, 2003). Most engineering applications require the optimization of several criteria simultaneously. Often the problems are complex, include discrete and continuous variables and there is no prior knowledge about the search space. These kind of problems are very more complex, since they consider multiple design criteria simultaneously within the optimization procedure. This is known as a multi-criteria (or multiobjective) optimization, that has been addressed successfully through GAs (Deb, 2001). The overall aim of multi-criteria evolutionary algorithms is to achieve a set of non-dominated optimal solutions known as Pareto front. At the end of the optimization procedure, instead of a single optimal (or near optimal) solution, the decision maker can select a solution from the Pareto front. Some of the key issues in multi-criteria GAs are: i) the number of objectives, ii) to obtain a Pareto front as wide as possible and iii) to achieve a Pareto front uniformly spread. Indeed, multi-objective techniques using GAs have been increasing in relevance as a research area. In 1989, Goldberg suggested the use of a GA to solve multi-objective problems and since then other researchers have been developing new methods, such as the multi-objective genetic algorithm (MOGA) (Fonseca & Fleming, 1995), the non-dominated sorted genetic algorithm (NSGA) (Deb, 2001), and the niched Pareto genetic algorithm (NPGA) (Horn et al., 1994), among several other variants (Coello, 1998). In this work the trajectory planning problem considers: i) robots with 2 and 3 degrees of freedom (dof ), ii) the inclusion of obstacles in the workspace and iii) up to five criteria that are used to qualify the evolving trajectory, namely the: joint traveling distance, joint velocity, end effector / Cartesian distance, end effector / Cartesian velocity and energy involved. These criteria are used to minimize the joint and end effector traveled distance, trajectory ripple and energy required by the manipulator to reach at destination point. Bearing this ideas in mind, the paper addresses the planning of robot trajectories, meaning the development of an algorithm to find a continuous motion that takes the manipulator from a given starting configuration up to a desired end position without colliding with any obstacle in the workspace. The chapter is organized as follows. Section 2 describes the trajectory planning and several approaches proposed in the literature. Section 3 formulates the problem, namely the representation adopted to solve the trajectory planning and the objectives considered in the optimization. Section 4 studies the algorithm convergence. Section 5 studies a 2R manipulator (i.e., a robot with two rotational joints/links) when the optimization trajectory considers two and five objectives. Sections 6 and 7 show the results for the 3R redundant manipulator with five goals and for other complementary experiments are described, respectively. Finally, section 8 draws the main conclusions.

Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures

This work reports on an experimental and finite element method (FEM) parametric study of adhesively-bonded single and double-strap repairs on carbon-epoxy structures under buckling unrestrained compression. The influence of the overlap length and patch thickness was evaluated. This loading gains a particular significance from the additional characteristic mechanisms of structures under compression, such as fibres microbuckling, for buckling restrained structures, or global buckling of the assembly, if no transverse restriction exists. The FEM analysis is based on the use of cohesive elements including mixed-mode criteria to simulate a cohesive fracture of the adhesive layer. Trapezoidal laws in pure modes I and II were used to account for the ductility of most structural adhesives. These laws were estimated for the adhesive used from double cantilever beam (DCB) and end-notched flexure (ENF) tests, respectively, using an inverse technique. The pure mode III cohesive law was equalled to the pure mode II one. Compression failure in the laminates was predicted using a stress-based criterion. The accurate FEM predictions open a good prospect for the reduction of the extensive experimentation in the design of carbon-epoxy repairs. Design principles were also established for these repairs under buckling.

Content validity and reliability of test of gross motor development in Chilean children

ABSTRACT OBJECTIVE To validate a Spanish version of the Test of Gross Motor Development (TGMD-2) for the Chilean population. METHODS Descriptive, transversal, non-experimental validity and reliability study. Four translators, three experts and 92 Chilean children, from five to 10 years, students from a primary school in Santiago, Chile, have participated. The Committee of Experts has carried out translation, back-translation and revision processes to determine the translinguistic equivalence and content validity of the test, using the content validity index in 2013. In addition, a pilot implementation was achieved to determine test reliability in Spanish, by using the intraclass correlation coefficient and Bland-Altman method. We evaluated whether the results presented significant differences by replacing the bat with a racket, using T-test. RESULTS We obtained a content validity index higher than 0.80 for language clarity and relevance of the TGMD-2 for children. There were significant differences in the object control subtest when comparing the results with bat and racket. The intraclass correlation coefficient for reliability inter-rater, intra-rater and test-retest reliability was greater than 0.80 in all cases. CONCLUSIONS The TGMD-2 has appropriate content validity to be applied in the Chilean population. The reliability of this test is within the appropriate parameters and its use could be recommended in this population after the establishment of normative data, setting a further precedent for the validation in other Latin American countries.

Analysis and recognition of similar environmental sounds

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Informática

Anti-vibration gloves and the forearm efforts during tools operations

The objective of this paper is to analyze the forearm muscular contraction levels associated to the use of anti-vibration gloves, by comparing the contraction levels with gloves and without gloves. Two different vibration tools were used in a simulated work environment: (1) A compact Duty Multi-Cutter Bosch and (2) and a Percussion Drill with a drill bit Ø20 mm. Standard operations were performed by each subject in the following materials: (1) Performing cross- sectional cuts in 80x40 mm pine section and (2) performing 20 mm diameter holes in a concrete slab 2 x 2 m, 70 mm thick. The forearm contraction level were measured by surface electromyography in four different muscles: Flexor Digitorum Superficialis (FDS), Flexor Carpi Ulnaris (FCU), Extensor Carpi Radialis Longus (ECRL) e Extensor Carpi Ulnaris (ECU). For the flexor muscles (FDS, FCU), an increase tendency in muscular contraction was observed when the operations are performed without gloves (2-5% MVE increase in the FDS and 3-9% MVE increase in the FCU). For the extensor muscles ECU a decrease tendency in muscular contraction was observed when the operations are performed without gloves (1-10% MVE decrease). Any tendency was found in the ECRL muscle. ECU was the muscle with the highest contraction level for 79% and 71% of the operators, during the operations respectively with the multi-cutter (P50= 27-30%MVE) and with the percussion drill (P50=46-55%MVE). As a final conclusion from this study, anti- vibration gloves may increase the forearm fatigue in the posterior region of the forearm (ECU muscle) during operations with the mentioned tools

Environmental Decision Support: a Multi-Agent Approach

The environmental management domain is vast and encompasses many identifiable activities: impact assessment, planning, project evaluation, etc. In particular, this paper focusses on the modelling of the project evaluation activity. The environmental decision support system under development aims to provide assistance to project developers in the selection of adequate locations, guaranteeing the compliance with the applicable regulations and the existing development plans as well as satisfying the specified project requirements. The inherent multidisciplinarity features of this activity lead to the adoption of the Multi-Agent paradigm, and, in particular, to the modelling of the involved agencies as a community of cooperative autonomous agents, where each agency contributes with its share of problem solving to the final system’s recommendation. To achieve this behaviour the many conclusions of the individual agencies have to be justifiably accommodated: not only they may differ, but can be interdependent, complementary, irreconcilable, or simply, independent. We propose different solutions (involving both local and global consistency) to support the adequate merge of the distinct perspectives that inevitably arise during this type of decision making.

Analysis of pesticide residues in strawberries and soils by GC-MS/MS, LC-MS/MS and two-dimensional GC-timeof- flight MS comparing organic and integrated pest management farming

This study analysed 22 strawberry and soil samples after their collection over the course of 2 years to compare the residue profiles from organic farming with integrated pest management practices in Portugal. For sample preparation, we used the citrate-buffered version of the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method. We applied three different methods for analysis: (1) 27 pesticides were targeted using LC-MS/MS; (2) 143 were targeted using low pressure GC-tandem mass spectrometry (LP-GC-MS/MS); and (3) more than 600 pesticides were screened in a targeted and untargeted approach using comprehensive, two-dimensional gas chromatography time-of-flight mass spectrometry (GC × GC-TOF-MS). Comparison was made of the analyses using the different methods for the shared samples. The results were similar, thereby providing satisfactory confirmation of both similarly positive and negative findings. No pesticides were found in the organic-farmed samples. In samples from integrated pest management practices, nine pesticides were determined and confirmed to be present, ranging from 2 μg kg−1 for fluazifop-pbutyl to 50 μg kg−1 for fenpropathrin. Concentrations of residues in strawberries were less than European maximum residue limits.

Distributed controllers modeling through Petri nets with multi-asynchronous-channels

This paper proposes the concept of multi-asynchronous-channel for Petri nets. Petri nets extended with multi-asynchronous-channels and time-domains support the specification of distributed controllers, where each controller has a synchronous execution but the global system is asynchronous (globally-asynchronous locally-synchronous systems). Each multi-asynchronous-channel specify the interaction between two or more distributed controllers. These channels, together with the time-domain concept, ensure the creation of network-independent models to support implementations using heterogeneous communication networks. The created models support not only the systems documentation but also their validation and implementation through simulation tools, verification tools, and automatic code generators. An application example illustrates the use of a Petri net class extended with the proposed channels. © 2015 IEEE.

Multi-agent management system for electric vehicle charging

This paper proposes an implementation, based on a multi-agent system, of a management system for automated negotiation of electricity allocation for charging electric vehicles (EVs) and simulates its performance. The widespread existence of charging infrastructures capable of autonomous operation is recognised as a major driver towards the mass adoption of EVs by mobility consumers. Eventually, conflicting requirements from both power grid and EV owners require automated middleman aggregator agents to intermediate all operations, for example, bidding and negotiation, between these parts. Multi-agent systems are designed to provide distributed, modular, coordinated and collaborative management systems; therefore, they seem suitable to address the management of such complex charging infrastructures. Our solution consists in the implementation of virtual agents to be integrated into the management software of a charging infrastructure. We start by modelling the multi-agent architecture using a federated, hierarchical layers setup and as well as the agents' behaviours and interactions. Each of these layers comprises several components, for example, data bases, decision-making and auction mechanisms. The implementation of multi-agent platform and auctions rules, and of models for battery dynamics, is also addressed. Four scenarios were predefined to assess the management system performance under real usage conditions, considering different types of profiles for EVs owners', different infrastructure configurations and usage and different loads on the utility grid (where real data from the concession holder of the Portuguese electricity transmission grid is used). Simulations carried with the four scenarios validate the performance of the modelled system while complying with all the requirements. Although all of these have been performed for one charging station alone, a multi-agent design may in the future be used for the higher level problem of distributing energy among charging stations. Copyright (c) 2014 John Wiley & Sons, Ltd.

Exposição a fungos dos trabalhadores dos ginásios com piscina

RESUMO - Os trabalhadores dos ginásios com piscinas apresentam maior prevalência de lesões fúngicas, como a Tinea pedis e a onicomicose, devido às características intrínsecas da sua actividade profissional, pois apresentam mais horas por dia de exposição à contaminação fúngica das superfícies. Esta situação verifica-se não só por serem os que mais frequentam os locais possíveis de estarem contaminados, como é o caso de balneários, vestiários e zona envolvente às piscinas, mas também porque algumas das actividades desenvolvidas são realizadas com os pés descalços. Além disso, a utilização de roupa sintética e de calçado ocluso, que retêm a sudação excessiva, favorece o desenvolvimento fúngico. Constituiu objectivo deste trabalho conhecer o risco de infecção e/ou lesão (Tinea pedis e onicomicose) nos trabalhadores dos ginásios com piscina e a sua eventual relação com a exposição à contaminação fúngica (ar e superfícies) dos locais de trabalho. Foram descritas as variáveis ambientais e biológicas que influenciam a infecção e/ou lesão fúngica em ambiente profissional e exploradas eventuais associações entre essas mesmas variáveis. Foram também conhecidas as diferenças da contaminação fúngica das superfícies entre as duas principais estações do ano (Verão e Inverno) e entre antes e depois da lavagem e desinfecção. O estudo realizado possui uma componente transversal, em que se pretendeu descrever os fenómenos ambientais e biológicos da contaminação fúngica em ambiente profissional e explorar eventuais associações entre variáveis; uma componente longitudinal, em que foram conhecidas as diferenças sazonais da contaminação fúngica das superfícies; e, ainda, uma componente quase experimental, em que foi analisada a distribuição fúngica nas superfícies antes e depois da lavagem e desinfecção. Na vertente transversal foi considerada uma amostra de 10 ginásios com piscina e outra amostra de, pelo menos, 10 profissionais de cada estabelecimento, perfazendo um total de 124 trabalhadores (75 Homens - 60,48% e 49 Mulheres - 39,52%). Foram realizadas 258 colheitas biológicas aos pés dos trabalhadores, efectuada a avaliação ambiental da contaminação fúngica dos estabelecimentos através de 50 colheitas de amostras de ar e 120 colheitas de amostras de superfícies (60 antes e 60 depois da lavagem e desinfecção) e efectuados os respectivos processamento laboratorial e identificação fúngica. Foram também avaliadas as variáveis ambientais temperatura, humidade relativa e velocidade do ar, preenchidas 10 grelhas de observação, com o objectivo de efectuar o registo de informação sobre as variáveis que xx influenciam a exposição ocupacional às espécies fúngicas e, ainda, completadas 124 grelhas de observação inerentes à colheita de material biológico, de modo a realizar o registo dos profissionais com lesão e outras informações pertinentes para a análise laboratorial. Todos os 124 trabalhadores responderam a um questionário, em simultâneo à realização das colheitas biológicas, de modo a conhecer algumas das variáveis individuais e profissionais com pertinência para o presente estudo. Num dos estabelecimentos, foram também estudadas as diferenças da contaminação fúngica das superfícies entre antes e depois da lavagem e desinfecção e, ainda, entre as duas estações do ano (Verão e Inverno). Nesse estabelecimento, foram realizadas 36 colheitas de superfícies antes e 36 colheitas depois da lavagem e desinfecção, em 6 dias diferentes da semana, durante 6 semanas sequenciais em cada estação do ano, completando um total de 72 colheitas de superfícies. Foi ainda criado e aplicado um método para estabelecer um padrão de exposição profissional a fungos nas superfícies, de modo a permitir definir níveis semi-quantitativos de estimação do risco de infecção fúngica dos trabalhadores dos ginásios com piscinas. Para o critério da Gravidade, considerou-se que a gravidade da contaminação e, consequentemente, da possível lesão, está intimamente relacionada com a espécie fúngica envolvida. Foram calculadas as médias da contaminação fúngica por cada estabelecimento antes da lavagem e desinfecção, de modo a estabelecer os níveis de Frequência e, em relação à Exposição, foram estabelecidos intervalos para agrupar as horas semanais de trabalho. Dos 124 trabalhadores que participaram no estudo, 58 (46,8%) possuíam lesões visíveis. Nesses 58, as Leveduras foram as mais isoladas (41,4%), seguidas dos Dermatófitos (24,1%) e de Fungos Filamentosos Não Dermatófitos (6,9%). Candida parapsilosis e Rhodotorula sp. foram as Leveduras mais frequentemente isoladas (20,2%); no caso dos Dermatófitos, Trichophyton rubrum foi a espécie mais frequente (55,5%) e, relativamente aos Fungos Filamentosos Não Dermatófitos, Penicillium sp. foi o mais isolado (15,6%), seguido do género Fusarium (12,5%). No que concerne à contaminação fúngica das superfícies, 37 fungos filamentosos foram isolados. Fusarium foi o género mais frequente, antes e depois da lavagem e desinfecção (19,1% - 17,2%). Em relação aos fungos leveduriformes, 12 leveduras diferentes foram identificadas, tendo sido os géneros Cryptococcus (40,6%) e Candida (49,3%) os mais frequentes antes e depois da lavagem e desinfecção, respectivamente. Em relação à contaminação fúngica do ar, foram identificados 25 fungos filamentosos diferentes, em que os 3 géneros mais frequentemente isolados foram Cladosporium (36,6%), Penicillium (19,0%) e Aspergillus (10,2%). Relativamente às leveduras, foi identificado o género xxi Rhodotorula (87,5%) e as espécies Trichosporon mucoides e Cryptococcus unigutulattus (12,5%). Verificou-se associação, ao nível de significância de 5%, entre lesão visível e horas semanais e entre lesão visível e tempo de profissão, comprovando a influência da duração da exposição ao factor de risco (contaminação fúngica do ambiente profissional), para a presença de lesão visível nos trabalhadores expostos (Tinea pedis e onicomicose), ficando demonstrada a relação entre a exposição ao factor de risco em estudo – exposição profissional a fungos – com os efeitos para a saúde. As variáveis ambientais avaliadas (temperatura, humidade relativa e velocidade do ar) não influenciaram a contaminação fúngica do ar e das superfícies, não tendo sido evidenciada nenhuma relação estatisticamente significativa (p>0,05). Contudo, verificou-se influência do número de ocupantes que frequentaram cada um dos estabelecimentos nas médias das unidades formadoras de colónias por metro quadrado nas superfícies antes da lavagem e desinfecção. Não se verificou correlação entre os resultados quantitativos da contaminação fúngica do ar e a das superfícies dos 10 estabelecimentos monitorizados. No entanto, verificaram-se diferenças significativas, ao nível de significância de 10%, entre a contaminação fúngica das superfícies e a contaminação fúngica do ar (p<0,1), tendo-se constatado que apesar de 50% dos valores mais baixos terem sido superiores na contaminação fúngica do ar, a contaminação fúngica das superfícies apresentou-se com maior variabilidade quantitativa. Em relação às diferenças significativas na contaminação fúngica das superfícies nos 10 estabelecimentos entre antes e depois da lavagem e desinfecção, apenas se verificou redução significativa (p<0,05) da contaminação fúngica depois da lavagem e desinfecção nos balneários e vestiários masculinos em relação aos fungos leveduriformes. No estabelecimento seleccionado, verificou-se que a relação entre a contaminação fúngica e a temperatura e humidade relativa não foi significativa (p>0,05) em ambas as estações do ano e também não se constatou influência dos ocupantes nos valores médios das unidades formadoras de colónias por metro quadrado das superfícies antes da lavagem e desinfecção em ambas as estações de ano. Em quase todas as situações em que se verificaram diferenças significativas entre as duas estações do ano, verificou-se um aumento das unidades formadoras de colónias por metro quadrado no Inverno, com excepção do total das unidades formadoras de colónias por metro quadrado antes da lavagem e desinfecção nos balneários e vestiários masculinos em que se verificou aumento no Verão. Constatou-se também que apenas ocorreu redução da xxii contaminação fúngica depois da lavagem e desinfecção nas escadas de acesso no Inverno e nos balneários e vestiários masculinos no Verão. Com a aplicação do método para estabelecer um padrão de exposição profissional a fungos nas superfícies obteve-se, nos 10 estabelecimentos, com Nível de Risco Mínimo 65 locais (54,2%), com Nível de Risco Médio 23 locais (19,2%) e com Nível de Risco Elevado 32 locais (26,6%). Próximo do jacuzzi e junto ao tanque foram os locais com mais classificações de Nível de Risco Elevado. No estabelecimento seleccionado verificou-se que, no Verão, depois da lavagem e desinfecção, ocorreu um maior número de locais classificados no Nível de Risco Elevado e, no Inverno, constatou-se a situação inversa, tendo sido observado maior número de locais com Nível de Risco Elevado antes da lavagem e desinfecção. Junto ao tanque e nas escadas de acesso à zona envolvente ao jacuzzi e tanque foram os locais com mais classificações de Nível de Risco Elevado, no Verão e no Inverno. Foram isolados nas superfícies fungos comuns aos isolados nos trabalhadores. Antes da lavagem e desinfecção, 30,3% dos fungos foram isolados nas superfícies e nos trabalhadores e depois desses procedimentos 45,5% dos fungos foram também isolados comummente. As Leveduras foram as mais isoladas comummente e as que se verificaram mais frequentes antes e depois da lavagem e desinfecção da superfícies e, também, nos resultados das colheitas biológicas realizadas aos trabalhadores, foram o género Rhodotorula e a espécie Candida parapsilosis, permitindo confirmar que a infecção fúngica dos trabalhadores está relacionada com a contaminação fúngica das superfícies. Concluiu-se que é necessária a intervenção em Saúde Ocupacional no âmbito da vigilância ambiental e da vigilância da saúde, com o intuito de diminuir a prevalência das infecções fúngicas. Para a prossecução desse objectivo, sugere-se a implementação de medidas preventivas, nomeadamente: o controlo da contaminação fúngica das superfícies mediante procedimentos de lavagem e desinfecção eficazes, de modo a minimizar a contaminação fúngica das superfícies; a identificação precoce da infecção através da realização de colheitas biológicas periódicas aos trabalhadores, inseridas num protocolo de vigilância da saúde; e, ainda, a sensibilização para a aplicação de medidas de higiene pessoal e o tratamento das patologias. A aplicação do método criado para estabelecer um padrão de exposição profissional a fungos nas superfícies servirá não só para a estimação do risco de infecção fúngica dos trabalhadores de ginásios com piscinas, mas também para facilitar o estabelecimento de valores fúngicos de referência, a implementação de medidas correctivas adequadas e imediatas e, ainda, a prevenção de infecções fúngicas, não só nos ginásios com piscina, mas também noutros contextos profissionais. ------------ SUMMARY - Gyms with swimming pools workers have higher prevalence of fungal injuries, such as Tinea pedis and onychomycosis. This is due to their work intrinsic characteristics, since they have more hours per day of exposure to surfaces fungal contamination. This occurs not only because they attend sites most likely to be contaminated, such as showers, changing rooms and pool surrounding area, but also because some of the activities are done barefoot. Furthermore, synthetic clothing and occluded footwear use, which retain the excessive sweating, promotes fungal development. The aim of this study was to know gymnasiums with swimming pool workers infection and/or injury (Tinea pedis and onychomycosis) risk, and its possible relationship with exposure to workplace fungal contamination (air and surfaces). This study describes environmental and biological variables that influence infection and/or fungal injury in a professional setting and explored possible associations between these variables. Differences in surfaces fungal contamination between the two main seasons (summer and winter), as well between before and after cleaning and disinfection were known. It was developed a study with an cross-sectional perspective, that aimed to describe the biological and environmental phenomena of fungal contamination in a professional environment and explore possible associations between variables; an longitudinal perspective in which were known surfaces fungal contamination seasonal differences; and also with an almost experimental perspective that analyzed surfaces fungal distribution before and after cleaning and disinfection. The cross-sectional perspective comprised 10 gyms with swimming pool sample, and another sample of, at least, 10 professionals in each establishment totalling 124 workers (75 men – 60,48%, and 49 women – 39,52%). Were performed 258 biological samples at workers feet, environmental fungal contamination evaluation from the establishments through 50 air samples and 120 surfaces samples (60 before and 60 after cleaning and disinfection) and conducted their laboratory processing and fungal identification. Were also evaluated environmental variables, such as temperature, relative humidity and air velocity completed 10 observation grids, in order to obtain data about variables that affect occupational exposure to fungal species, and also completed 124 observation grids inherent to biological material collection, in order to know the professionals with injury and other relevant information for laboratory analysis. All 124 workers answered to a questionnaire at the same time that occur biological samples collection, in order to xxv obtain information about some of the individual and professional variables with relevance to this study. In one of the establishments were also studied differences concerning surfaces fungal contamination between before and after cleaning and disinfection, and also between two main seasons (summer and winter). In this setting, there were performed 36 surfaces samples before and 36 surfaces samples after cleaning and disinfection on 6 different week days for 6 sequential weeks in each season, totalling 72 surfaces samples. It was also created and implemented a method to establish a pattern for surfaces fungal occupational exposure, in order to help define semi-quantitative levels estimation to fungal infection risk in gyms with swimming pools workers. For Gravity criterion it was considered that contamination severity and, thus, the possible injury are closely related to implicate fungal species. Was calculated fungal contamination average by each establishment prior cleaning and disinfection, in order to establish Frequency levels. Regarding Exposure, were established weekly hours group intervals spent in professional activity. From the 124 professionals tested, 58 (46,8%) had visible injuries. In the 58 workers, Yeasts were the most isolated (41,4%), followed by Dermatophytes (24,1%) and Other Filamentous Fungi Besides Dermatophytes (6,9%). Candida parapsilosis and Rhodotorula sp. were the most frequently isolated Yeasts (20,2% for each), from Dermatophytes, Trichophyton rubrum was the most frequently isolated species (55,5%) and from Other Filamentous Fungi Besides Dermatophytes, Penicillium sp. was the most frequent (15,6%), followed by Fusarium genera (12,5%). Regarding surfaces fungal contamination, 37 filamentous fungi were isolated. Fusarium genera was the most frequent, before and after cleaning and disinfection (19,1% - 17,2%). Considering yeasts, 12 different yeasts were identified, being Cryptococcus (40,6%) and Candida (49,3%) genera the more frequent before and after cleaning and disinfection, respectively. In relation to air fungal contamination, 25 different filamentous fungi were identified and the 3 most frequently isolated genera were Cladosporium (36,6%), Penicillium (19,0%) and Aspergillus (10,2%). For yeasts, were identified Rhodotorula genera (87,5%), and also the species Trichosporon mucoides and Cryptococcus unigutulattus (12,5%). Was found association with 5% significance level, between visible injury and weekly hours and between visible injury and occupation time, confirming exposure duration influence to risk factor (work environment fungal contamination) for the visible injury presence in exposed workers (Tinea pedis and onychomycosis), being confirmed the relation between the study exposure risk - occupational exposure to fungi - with health effects. xxvi Environmental variables evaluated (temperature, relative humidity and air velocity) did not affect air and surfaces fungal contamination and wasn’t found no statistically significant relation (p>0,05). However, there was evidence that occupant’s number influence surfaces colony forming units mean per square meter before cleaning and disinfection. There was no correlation between quantitative data from air fungal contamination and surfaces fungal contamination from the 10 establishments monitored. However, there were significant differences with 10% significance level, between surfaces and air fungal contamination (p<0,1), and despite 50% of the lowest rates were higher in air fungal contamination, it was found that surfaces fungal contamination had more quantitative variability. Regarding differences from the 10 establishments surfaces fungal contamination, between before and after cleaning and disinfection, there was only a significant reduction (p<0,05) in fungal contamination after cleaning and disinfection in male changing rooms for yeasts. In the selected establishment, it was found that relation between fungal contamination and temperature and relative humidity was not significant (p>0,05) in both seasons, and also there wasn’t no influence observed from occupants in surfaces colony forming units mean per square meters before cleaning and disinfection in both seasons. In almost all situations where significant differences between the two seasons were shown, there was a colony-forming units per square meter increase in winter. There was an exception in total colony forming units per square meter before cleaning and disinfection in male changing room’s exception, where there was an increase in summer. Furthermore, was found that only occur a reduction in fungal contamination after cleaning and disinfection, on access stairs in winter, as well as in male changing rooms in summer. With application from the method to establish pattern for surfaces fungal occupational exposure, it was obtained, in the 10 establishments, 65 sites with Low Risk Level (54,2%), 23 sites with Average Risk Level (19,2%) and 32 sites with High Risk Level (26,6%). Near swimming pool and jacuzzi were the places with more High Risk Level classifications. In the selected establishment, was found that in the summer, after cleaning and disinfection, there were a greater number of sites classified as High Risk Level, and in winter it was found the opposite situation, being noted more places with High Risk Level before cleaning and disinfection. Next to swimming pool and access stairs to swimming pool and jacuzzi were the places with more High Risk Level classifications in Summer and Winter. Were isolated common fungi in surfaces and in workers. Prior to cleaning and disinfection 30,3% of fungi were isolated on surfaces and workers, and after 45,5% of fungi were also xxvii commonly isolated. The Yeasts were the most commonly isolated and the most frequent before and after surfaces cleaning and disinfection, and also in workers biological samples, were Rhodotorula genera and Candida parapsilosis, allowing confirming that workers fungal infection is related with surfaces fungal contamination. It was concluded that Occupational Health intervention it is necessary, in environmental monitoring and health surveillance perspective, in order to reduce fungal infections prevalence. To achieve this objective, preventive measures implementation it’s recommended, including: surfaces fungal contamination control, through effective cleaning and disinfecting in order to minimize surfaces fungal contamination; early infection identification by performing periodic biological sampling from workers, included in a health surveillance protocol; and also personal hygiene and diseases treatment awareness. Application of the created method to establish pattern for surfaces fungal occupational exposure, will be useful not only for estimating workers from gymnasiums with swimming pools fungal infection risk, but also to facilitate fungal reference values stipulation, effective and corrective measures implementation, and also, fungal infections prevention, not only in gymnasiums with swimming pool, but also in other professional settings.----------------- RÉSUMÉ - Les travailleurs des gymnases avec des piscines présentent souvent des infections fongiques, telles que Tinea pedis et aussi des onychomycoses, dues à leur activité professionnel, parce qu’ils restent plus longtemps tout prés des surfaces avec une certaine contamination fongique. Toute cette situation est due non seulement parce qu’ils sont ceux qui fréquentent plus souvent les places plus contaminées: des balnéaires, des vestiaires et des zones autour des piscines, mais aussi ils réalisent des activités aux pieds nus ou avec des chaussures très fermés et encore quelques fois avec des vêtements synthétiques. Tout cela emmène à une grande sudation ce qui aidera au développement fongique. Un objective de ce travaille a été connaître le risque d’infection et/ou présence de lésion (Tinea pedis et des onychomycoses) dans les travailleurs des gymnases avec des piscines et leur éventuel rapport avec l’exposition à la contamination fongique (de l’air et des surfaces) dans leurs locaux de travaille. On a décrit aussi des variables d’environnement et biologiques qui ont une certaine influence dans les infections fongiques dans tout l’environnement professionnel et aussi approfondir des éventuels associations entre ces même variables. On a encore reconnu des différences de la contamination fongique avant et après des lavages et désinfection de ces surfaces. Aussi on a trouvé des différences de contamination en Été et en Hiver. Cet étude a un composante transversale, en visant la description des phénomènes de contamination fongique biologique et de l'environnement dans un environnement professionnel et l’étude des associations possibles entre les variables; une composante longitudinale dans laquelle ils étaient connus comme des variations saisonnières de la contamination fongique des surfaces, et même; un quasi-composante expérimentale, où elle a examiné la répartition des champignons surfaces avant et après le lavage et la désinfection. Dans la composante transversale on été considérés 1 échantillons de 10 gymnases avec des piscines et un autre échantillon de au moins 10 professionnels de chaque établissement dans un total 124 travailleurs (75 hommes - 60,48% et 49 femmes - 39,52%). On a réalisé 258 prélèvements aux pieds des travailleurs et on a effectué en simultané la validation par contamination fongique de l’environnement par 50 prélèvements de l’air et par 120 prélèvements de surfaces (60 avant et 60 après des lavages et des désinfections) et on a effectué leur traitement en laboratoire et l’identification fongique. On a fait aussi l’évaluation des variables de l’environnement, la température, l’humidité relative et la vitesse de l’air. On a remplie 10 tableaux xxix d’observation, avec l’objective d’obtenir des informations sur les variables qu’influenceront l’exposition occupationnel aux souches fongiques, et encore 124 tableaux d’observation liée au prélèvement du matériel biologique, pour réaliser le registre des professionnels avec des lésions et des autres informations pertinentes pour une analyse laboratoire. Tous ces 124 travailleurs ont rempli un questionnaire au même temps que les prélèvements biologiques, afin de connaître quelques variables individuels et professionnels importants pour cet étude. Dans un des établissements on a aussi étudié les différences fongiques des surfaces parmi avant et après les lavages et de la désinfection et encore parmi l’Été et l’Hiver. Dans ce même établissement on a réalisé 36 prélèvements des surfaces avant et 36 après des lavages et de la désinfection, pendant 6 jours différents de la semaine, pendant 6 semaines en chaque saison de l’année, dans un total de 72 prélèvements des surfaces. On a encore crié et appliqué une méthode pour établir un standard d’exposition professionnelle au fungi sur les surfaces, afin de permettre la définition des niveaux semi quantitative d’estimation des risques d’infection fongique des travailleurs des gymnases avec des piscines. Pour le critère de Gravité, il a été considéré que la gravité de la contamination, et donc les possibles dommages, est étroitement liée aux espèces fongiques impliquées. Nous avons calculé la moyenne de la contamination fongique par chaque établissement avant le lavage et la désinfection afin d'établir les niveaux de Fréquence et, par rapport à l'Exposition, ont été crées pour regrouper les intervalles d'heures hebdomadaires consacrées à l'activité professionnelle en question. Sur les 124 travailleurs qui ont participé à l'étude, 58 (46,8%) avaient des lésions visibles. Parmi ces 58, les Levures ont été les plus isolées (41,4%), suivis par des Dermatophytes (24,1%) et des Filamenteux Non Dermatophytes (6,9%). Candida parapsilosis and Rhodotorula sp. ont été les Levures les plus fréquemment isolées (20,2%); dans le cas des Dermatophytes, Trichophyton rubrum est le plus fréquent (55,5%) et pour les Filamenteux Non Dermatophytes, Penicillium sp. a été le plus isolé (15,6%), suivi par Fusarium sp. (12,5%). En ce qui concerne la contamination fongique des surfaces, 37 champignons filamenteux ont été isolés. Le genre Fusarium est le plus fréquent avant et après le lavage et la désinfection (19,1% - 17,2%). Pour la levure, 12 levures différentes ont été identifiées, ayant été Cryptococcus sp. (40,6%) et Candida sp. (49,3%) les plus fréquents avant et après le lavage et la désinfection, respectivement. En ce qui concerne la contamination fongique de l'air, on a identifié 25 différents champignons filamenteux, où les 3 genres les plus fréquemment isolés étaient Cladosporium (36,6%), Penicillium (19,0%) et Aspergillus (10,2%). Pour les levures, il a été identifié le genre xxx Rhodotorula (87,5%) et les espèces Trichosporon mucoides et Cryptococcus unigutulattus (12,5%). On a vérifié une association, au niveau de signification de 5%, entre les lésions visibles et les heures hebdomadaires et entre les lésions visibles et la durée d’occupation, ce qui confirme l'influence de la durée de l'exposition aux facteurs de risque (contamination fongique dans le milieu de travail) pour la présence des lésions visibles chez les travailleurs exposés (Tinea pedis et onychomycose), en démontrant une relation entre l'exposition au facteur de risque dans ces études - l'exposition professionnelle aux champignons - avec les effets sur la santé. Les variables environnementales évalué (température, humidité relative et la vitesse de l'air) ne modifient pas la contamination fongique de l'air et des surfaces; donc, n'a pas été démontré aucune relation statistiquement significative (p>0,05). Cependant, il y a une influence du nombre d'occupants qui ont participé à chacun des établissements en moyenne des unités formant colonie par mètre carré sur la surface avant le lavage et la désinfection. Il n'y avait pas de corrélation entre les résultats quantitatifs de la contamination fongique de l'air et des surfaces des 10 établissements surveillés, cependant il existe des différences importantes, au niveau de signification de 10% entre la contamination fongique des surfaces et de la contamination fongique de l'air (p <0,1), on a constaté que malgré 50% des niveaux les plus bas étaient plus élevés dans la contamination fongique de l'air, la contamination fongique des surfaces présentée une plus grande variabilité quantitativement. En ce qui concerne les différences de la contamination fongique des surfaces dans les 10 établissements entre avant et après le lavage et la désinfection, il y avait seulement une réduction significative (p<0,05) de la contamination fongique après le lavage et la désinfection dans les balnéaires et vestiaires pour les hommes par rapport aux levures. Lors de l'établissement choisi, on a constaté que le rapport entre la contamination fongique et la température et l'humidité relative n'était pas significatif (p>0,05) dans les deux saisons et aussi on n’a pas observé l'influence des occupants en moyenne des unités formant colonie par mètres carrés de surfaces avant le lavage et la désinfection dans les deux saisons de l'année. Dans presque toutes les situations ou on a vérifié des différences significatives entre les deux saisons, il ya eu une augmentation des unités formant des colonies par mètre carré en Hiver, à l'exception du total des unités formant des colonies par mètre carré avant le lavage et désinfection dans les balnéaires et vestiaires des hommes où il y a eu une augmentation en Été. On a également été constaté que seulement a eu une réduction de la contamination des xxxi champignons après la désinfection de l'escalier d'accès en Hiver et dans les balnéaires et vestiaires des hommes en Été. Avec la méthode pour établir standard d’exposition professionnelle au fungi sur les surfaces on a obtenu dans les 10 établissements, avec le Niveau de Risque Faible de 65 places (54,2%), avec le Niveau de Risque Moyen 23 places (19,2%) et 32 places avec le Niveau de Risque Élevé (26,6%). Près du jacuzzi et près de la piscine sont les lieux avec des plus évaluations de Niveau de Risque Élevé. Lors de l'établissement choisi, il a été constaté que, dans l'Été, après le lavage et la désinfection, un plus grand nombre de places évaluées comme présentant un Niveau de Risque Élevé et en Hiver on a constaté la situation inverse avec de nombreux points de Niveau de Risque Élevé avant le lavage et la désinfection. A côté de la piscine et les escaliers ont été les lieux avec plus grands classifications de Niveau de Risque Élevé en Été et en Hiver. On a isolé, chez les travailleurs, des champignons communs aux isolés sur les surfaces. Avant le lavage et la désinfection, 30,3% des champignons ont été isolés sur les travailleurs et sur les surfaces et, après ces procédures, 45,5% des champignons ont été isolés fréquemment. Les levures les plus souvent isolées et les plus fréquentes avant et après le lavage et la désinfection des surfaces, et aussi dans les résultats d'échantillons biologiques prélevés sur les travailleurs, étaient du genre Rhodotorula et les espèces de Candida parapsilosis, ce qui permet confirmer que l'infection fongique des travailleurs est liée à la contamination fongique des surfaces. On a conclu qu’il est nécessaire l'intervention en Santé Occupationnelle sous la surveillance de l'environnement et sous la surveillance de la santé, afin de réduire la prévalence des infections fongiques. Pour atteindre cet objectif, nous suggérons la mise en oeuvre de mesures préventives, y compris: le contrôle de la contamination fongique des surfaces par des méthodes de lavage et de désinfection afin de minimiser la contamination fongique des surfaces, l'identification précoce de l'infection avec des prélèvements biologiques périodiques, notamment un protocole pour la surveillance de la santé, et aussi la conscience du sens de l'hygiène personnelle et le traitement des pathologies. La méthode mise en place pour l’établissement d’un standard d’exposition professionnelle au fungi sur les surfaces, servira à estimer non seulement le risque d'infection fongique des travailleurs dans les gymnases avec des piscines, mais aussi pour faciliter l'établissement de valeurs de référence de champignons, l'application des mesures correctives immédiates et appropriées, et aussi la prévention des infections fongiques, non seulement dans les gymnases avec piscine, mais aussi dans d'autres contextes professionnels.

Estudo da exposição profissional a formaldeído em laboratórios hospitalares de anatomia patológica

RESUMO - A exposição a formaldeído é reconhecidamente um dos mais importantes factores de risco presente nos laboratórios hospitalares de anatomia patológica. Neste contexto ocupacional, o formaldeído é utilizado em solução, designada comummente por formol. Trata-se de uma solução comercial de formaldeído, normalmente diluída a 10%, sendo pouco onerosa e, por esse motivo, a eleita para os trabalhos de rotina em anatomia patológica. A solução é utilizada como fixador e conservante do material biológico, pelo que as peças anatómicas a serem processadas são previamente impregnadas. No que concerne aos efeitos para a saúde do formaldeído, os efeitos locais parecem apresentar um papel mais importante comparativamente com os efeitos sistémicos, devido à sua reactividade e rápido metabolismo nas células da pele, tracto gastrointestinal e pulmões. Da mesma forma, a localização das lesões correspondem principalmente às zonas expostas às doses mais elevadas deste agente químico, ou seja, o desenvolvimento dos efeitos tóxicos dependerá mais da intensidade da dose externa do que da duração da exposição. O efeito do formaldeído no organismo humano mais facilmente detectável é a acção irritante, transitória e reversível sobre as mucosas dos olhos e aparelho respiratório superior (naso e orofaringe), o que acontece em geral para exposições frequentes e superiores a 1 ppm. Doses elevadas são citotóxicas e podem conduzir a degenerescência e necrose das mucosas e epitélios. No que concerne aos efeitos cancerígenos, a primeira avaliação efectuada pela International Agency for Research on Cancer data de 1981, actualizada em 1982, 1987, 1995 e 2004, considerando-o como um agente cancerígeno do grupo 2A (provavelmente carcinogénico). No entanto, a mais recente avaliação, em 2006, considera o formaldeído no Grupo 1 (agente carcinogénico) com base na evidência de que a exposição a este agente é susceptível de causar cancro nasofaríngeo em humanos. Constituiu objectivo principal deste estudo caracterizar a exposição profissional a formaldeído nos laboratórios hospitalares de anatomia patológica Portugueses. Pretendeu-se, ainda, descrever os fenómenos ambientais da contaminação ambiental por formaldeído e explorar eventuais associações entre variáveis. Considerou-se uma amostra de 10 laboratórios hospitalares de anatomia patológica, avaliada a exposição dos três grupos profissionais por comparação com os dois referenciais de exposição e, ainda, conhecidos os valores de concentração máxima em 83 actividades. Foram aplicados simultaneamente dois métodos distintos de avaliação ambiental: um dos métodos (Método 1) fez uso de um equipamento de leitura directa com o princípio de medição por Photo Ionization Detection, com uma lâmpada de 11,7 eV e, simultaneamente, realizou-se o registo da actividade. Este método disponibilizou dados para o referencial de exposição da concentração máxima; o outro método (Método 2) traduziu-se na aplicação do método NIOSH 2541, implicando o uso de bombas de amostragem eléctricas de baixo caudal e posterior processamento analítico das amostras por cromatografia gasosa. Este método, por sua vez, facultou dados para o referencial de exposição da concentração média ponderada. As estratégias de medição de cada um dos métodos e a definição dos grupos de exposição existentes neste contexto ocupacional, designadamente os Técnicos de Anatomia Patológica, os Médicos Anatomo-Patologistas e os Auxiliares, foram possíveis através da informação disponibilizada pelas técnicas de observação da actividade da análise (ergonómica) do trabalho. Estudaram-se diversas variáveis independentes, nomeadamente a temperatura ambiente e a humidade relativa, a solução de formaldeído utilizada, as condições de ventilação existentes e o número médio de peças processadas por dia em cada laboratório. Para a recolha de informação sobre estas variáveis foi preenchida, durante a permanência nos laboratórios estudados, uma Grelha de Observação e Registo. Como variáveis dependentes seleccionaram-se três indicadores de contaminação ambiental, designadamente o valor médio das concentrações superiores a 0,3 ppm em cada laboratório, a Concentração Média Ponderada obtida para cada grupo de exposição e o Índice do Tempo de Regeneração de cada laboratório. Os indicadores foram calculados e definidos através dos dados obtidos pelos dois métodos de avaliação ambiental aplicados. Baseada no delineado pela Universidade de Queensland, foi ainda aplicada uma metodologia de avaliação do risco de cancro nasofaríngeo nas 83 actividades estudadas de modo a definir níveis semi-quantitativos de estimação do risco. Para o nível de Gravidade considerou-se a informação disponível em literatura científica que define eventos biológicos adversos, relacionados com o modo de acção do agente químico e os associa com concentrações ambientais de formaldeído. Para o nível da Probabilidade utilizou-se a informação disponibilizada pela análise (ergonómica) de trabalho que permitiu conhecer a frequência de realização de cada uma das actividades estudadas. A aplicação simultânea dos dois métodos de avaliação ambiental resultou na obtenção de resultados distintos, mas não contraditórios, no que concerne à avaliação da exposição profissional a formaldeído. Para as actividades estudadas (n=83) verificou-se que cerca de 93% dos valores são superiores ao valor limite de exposição definido para a concentração máxima (VLE-CM=0,3 ppm). O “exame macroscópico” foi a actividade mais estudada e onde se verificou a maior prevalência de resultados superiores ao valor limite (92,8%). O valor médio mais elevado da concentração máxima (2,04 ppm) verificou-se no grupo de exposição dos Técnicos de Anatomia Patológica. No entanto, a maior amplitude de resultados observou-se no grupo dos Médicos Anatomo-Patologistas (0,21 ppm a 5,02 ppm). No que respeita ao referencial da Concentração Média Ponderada, todos os valores obtidos nos 10 laboratórios estudados para os três grupos de exposição foram inferiores ao valor limite de exposição definido pela Occupational Safety and Health Administration (TLV-TWA=0,75 ppm). Verificou-se associação estatisticamente significativa entre o número médio de peças processadas por laboratório e dois dos três indicadores de contaminação ambiental utilizados, designadamente o valor médio das concentrações superiores a 0,3 ppm (p=0,009) e o Índice do Tempo de Regeneração (p=0,001). Relativamente à temperatura ambiente não se observou associação estatisticamente significativa com nenhum dos indicadores de contaminação ambiental utilizados. A humidade relativa apresentou uma associação estatisticamente significativa apenas com o indicador de contaminação ambiental da Concentração Média Ponderada de dois grupos de exposição, nomeadamente com os Médicos Anatomo-Patologistas (p=0,02) e os Técnicos de Anatomia Patológica (p=0,04). A aplicação da metodologia de avaliação do risco nas 83 actividades estudadas permitiu verificar que, em cerca de dois terços (35%), o risco foi classificado como (pelo menos) elevado e, ainda, constatar que 70% dos laboratórios apresentou pelo menos 1 actividade com a classificação de risco elevado. Da aplicação dos dois métodos de avaliação ambiental e das informações obtidas para os dois referenciais de exposição pode concluir-se que o referencial mais adequado é a Concentração Máxima por estar associado ao modo de actuação do agente químico. Acresce, ainda, que um método de avaliação ambiental, como o Método 1, que permite o estudo das concentrações de formaldeído e simultaneamente a realização do registo da actividade, disponibiliza informações pertinentes para a intervenção preventiva da exposição por permitir identificar as actividades com a exposição mais elevada, bem como as variáveis que a condicionam. As peças anatómicas apresentaram-se como a principal fonte de contaminação ambiental por formaldeído neste contexto ocupacional. Aspecto de particular interesse, na medida que a actividade desenvolvida neste contexto ocupacional e, em particular na sala de entradas, é centrada no processamento das peças anatómicas. Dado não se perspectivar a curto prazo a eliminação do formaldeído, devido ao grande número de actividades que envolvem ainda a utilização da sua solução comercial (formol), pode concluir-se que a exposição a este agente neste contexto ocupacional específico é preocupante, carecendo de uma intervenção rápida com o objectivo de minimizar a exposição e prevenir os potenciais efeitos para a saúde dos trabalhadores expostos. ---------------- ABSTRACT - Exposure to formaldehyde is recognized as one of the most important risk factors present in anatomy and pathology laboratories from hospital settings. In this occupational setting, formaldehyde is used in solution, typically diluted to 10%, and is an inexpensive product. Because of that, is used in routine work in anatomy and pathology laboratories. The solution is applied as a fixative and preservative of biological material. Regarding formaldehyde health effects, local effects appear to have a more important role compared with systemic effects, due to his reactivity and rapid metabolism in skin, gastrointestinal tract and lungs cells. Likewise, lesions location correspond mainly to areas exposed to higher doses and toxic effects development depend more on external dose intensity than exposure duration. Human body formaldehyde effect more easily detectable is the irritating action, transient and reversible on eyes and upper respiratory tract (nasal and throat) membranes, which happen in general for frequent exposure to concentrations higher than 1 ppm. High doses are cytotoxic and can lead to degeneration, and also to mucous membranes and epithelia necrosis. With regard to carcinogenic effects, first assessment performed by International Agency for Research on Cancer in 1981, updated in 1982, 1987, 1995 and 2004, classified formaldehyde in Group 2A (probably carcinogenic). However, most recent evaluation in 2006, classifies formaldehyde carcinogenic (Group 1), based on evidence that exposure to this agent is likely to cause nasopharyngeal cancer in humans. This study principal objective was to characterize occupational exposure to formaldehyde in anatomy and pathology hospital laboratories, as well to describe formaldehyde environmental contamination phenomena and explore possible associations between variables. It was considered a sample of 10 hospital pathology laboratories, assessed exposure of three professional groups for comparison with two exposure metrics, and also knows ceiling concentrations in 83 activities. Were applied, simultaneously, two different environmental assessment methods: one method (Method 1) using direct reading equipment that perform measure by Photo Ionization Detection, with 11,7 eV lamps and, simultaneously, make activity description and film. This method provided data for ceiling concentrations for each activity study (TLV-C). In the other applied method (Method 2), air sampling and formaldehyde analysis were performed according to NIOSH method (2541). This method provided data average exposure concentration (TLV-TWA). Measuring and sampling strategies of each methods and exposure groups definition (Technicians, Pathologists and Assistants) was possible by information provided by activities (ergonomic) analysis. Several independent variables were studied, including temperature and relative humidity, formaldehyde solution used, ventilation conditions, and also anatomic pieces mean value processed per day in each laboratory. To register information about these variables was completed an Observation and Registration Grid. Three environmental contamination indicators were selected has dependent variables namely: mean value from concentrations exceeding 0,3 ppm in each laboratory, weighted average concentration obtained for each exposure group, as well each laboratory Time Regeneration Index. These indicators were calculated and determined through data obtained by the two environmental assessment methods. Based on Queensland University proposal, was also applied a methodology for assessing nasopharyngeal cancer risk in 83 activities studied in order to obtain risk levels (semi-quantitative estimation). For Severity level was considered available information in scientific literature that defines biological adverse events related to the chemical agent action mode, and associated with environment formaldehyde concentrations. For Probability level was used information provided by (ergonomic) work analysis that helped identifies activity frequency. Environmental assessment methods provide different results, but not contradictory, regarding formaldehyde occupational exposure evaluation. In the studied activities (n=83), about 93% of the values were above exposure limit value set for ceiling concentration in Portugal (VLE-CM = 0,3 ppm). "Macroscopic exam" was the most studied activity, and obtained the higher prevalence of results superior than 0,3 ppm (92,8%). The highest ceiling concentration mean value (2,04 ppm) was obtain in Technicians exposure group, but a result wider range was observed in Pathologists group (0,21 ppm to 5,02 ppm). Concerning Method 2, results from the three exposure groups, were all lower than limit value set by Occupational Safety and Health Administration (TLV-TWA=0,75ppm). There was a statistically significant association between anatomic pieces mean value processed by each laboratory per day, and two of the three environmental contamination indicators used, namely average concentrations exceeding 0,3 ppm (p=0,009) and Time Regeneration Index (p=0,001). Temperature was not statistically associated with any environmental contamination used indicators. Relative humidity had a statistically significant association only with one environmental contamination indicator, namely weighted average concentration, particularly with Pathologists group (p=0,02) and Technicians group (p=0,04). Risk assessment performed in the 83 studied activities showed that around two thirds (35%) were classified as (at least) high, and also noted that 70% of laboratories had at least 1 activity with high risk rating. The two environmental assessment methods application, as well information obtained from two exposure metrics, allowed to conclude that most appropriate exposure metric is ceiling concentration, because is associated with formaldehyde action mode. Moreover, an environmental method, like Method 1, which allows study formaldehyde concentrations and relates them with activity, provides relevant information for preventive information, since identifies the activity with higher exposure, as well variables that promote exposure. Anatomic pieces represent formaldehyde contamination main source in this occupational setting, and this is of particular interest because all activities are focused on anatomic pieces processing. Since there is no prospect, in short term, for formaldehyde use elimination due to large number of activities that still involve solution use, it can be concluded that exposure to this agent, in this particular occupational setting, is preoccupant, requiring an rapid intervention in order to minimize exposure and prevent potential health effects in exposed workers.

Realistic Multi-Agent Simulation of Competitive Electricity Markets

The dynamism and ongoing changes that the electricity markets sector is constantly suffering, enhanced by the huge increase in competitiveness, create the need of using simulation platforms to support operators, regulators, and the involved players in understanding and dealing with this complex environment. This paper presents an enhanced electricity market simulator, based on multi-agent technology, which provides an advanced simulation framework for the study of real electricity markets operation, and the interactions between the involved players. MASCEM (Multi-Agent Simulator of Competitive Electricity Markets) uses real data for the creation of realistic simulation scenarios, which allow the study of the impacts and implications that electricity markets transformations bring to different countries. Also, the development of an upper-ontology to support the communication between participating agents, provides the means for the integration of this simulator with other frameworks, such as MAN-REM (Multi-Agent Negotiation and Risk Management in Electricity Markets). A case study using the enhanced simulation platform that results from the integration of several systems and different tools is presented, with a scenario based on real data, simulating the MIBEL electricity market environment, and comparing the simulation performance with the real electricity market results.

Contextual and Environmental Awareness Laboratory for Energy Consumption Management

The recent changes on power systems paradigm requires the active participation of small and medium players in energy management. With an electricity price fluctuation these players must manage the consumption. Lowering costs and ensuring adequate user comfort levels. Demand response can improve the power system management and bring benefits for the small and medium players. The work presented in this paper, which is developed aiming the smart grid context, can also be used in the current power system paradigm. The proposed system is the combination of several fields of research, namely multi-agent systems and artificial neural networks. This system is physically implemented in our laboratories and it is used daily by researchers. The physical implementation gives the system an improvement in the proof of concept, distancing itself from the conventional systems. This paper presents a case study illustrating the simulation of real-time pricing in a laboratory.