Road Life Perspectives and Experiences Among Iranian Truck Drivers: a Qualitative Study

Truck drivers are one of the largest occupational groups in Iran. Evidence from previous studies suggests that working and living conditions on the road engender many concerns for truck drivers, and their families and communities. This research aimed to explore the experiences of Iranian truck drivers regarding life on the road. This qualitative study was conducted among Iranian truck drivers working in the inter-state transportation sector. A purposeful sample of 20 truck drivers took part in this research. Data were collected through semi-structured interviews and analyzed based on qualitative content analysis. After analysis of the data, three main themes emerged: "Individual impacts related to the hardships of life on the road life", "Family impacts related to the hardships of road life", and "Having positive attitude towards work and road". These findings represent the dimensions of perspectives in the road-life of truck drivers. Although truck drivers possess positive beliefs about their occupation and life on the road, they and their families face many hardships which should be well understood. They also need support to be better able to solve the road-life concerns they face. This study's findings are useful for occupational programming and in the promotion of health for truck drivers.

Testing a linear propagation module on some acoustic scattering problems

Abstract not available

A study of drivers in major accidents, September, 1935-April, 1936, by Harold L. Gaunt [and] Laurence W. Murray, 1936

This preliminary study of the drivers involved in major accidents in Iowa and their subsequent examination was undertaken by the State Planning Board. All personal injury and fatal accidents, and those property damage accidents of such serious nature as to indicate the suspension or revocation of the drivers license, occurring in the state from 1935 to April 1036 are included.

Cross-sectoral differences in the drivers of innovation: evidence from the Irish Community Innovation Survey

Purpose: The purpose of this paper is to analyse differences in the drivers of firm innovation performance across sectors. The literature often makes the assumption that firms in different sectors differ in their propensity to innovate but not in the drivers of innovation. The authors empirically assess whether this assumption is accurate through a series of econometric estimations and tests. Design/methodology/approach: The data used are derived from the Irish Community Innovation Survey 2004-2006. A series of multivariate probit models are estimated and the resulting coefficients are tested for parameter stability across sectors using likelihood ratio tests. Findings: The results indicate that there is a strong degree of heterogeneity in the drivers of innovation across sectors. The determinants of process, organisational, new to firm and new to market innovation varies across sectors suggesting that the pooling of sectors in an innovation production function may lead to biased inferences. Research limitations/implications: The implications of the results are that innovation policies targeted at stimulating innovation need to be tailored to particular industries. One size fits all policies would seem inappropriate given the large degree of heterogeneity observed across the drivers of innovation in different sectors. Originality/value: The value of this paper is that it provides an empirical test as to whether it is suitable to group sectoral data when estimating innovation production functions. Most papers simply include sectoral dummies, implying that only the propensity to innovate differs across sectors and that the slope of the coefficient estimates are in fact consistent across sectors.

From crime to court - an experience report of a digital forensics group project module.

This paper discusses the large-scale group project undertaken by BSc Hons Digital Forensics students at Abertay University in their penultimate year. The philosophy of the project is to expose students to the full digital crime "life cycle", from commission through investigation, preparation of formal court report and finally, to prosecution in court. In addition, the project is novel in two aspects; the "crimes" are committed by students, and the moot court proceedings, where students appear as expert witnesses for the prosecution, are led by law students acting as counsels for the prosecution and defence. To support students, assessments are staged across both semesters with staff feedback provided at critical points. Feedback from students is very positive, highlighting particularly the experience of engaging with the law students and culminating in the realistic moot court, including a challenging cross-examination. Students also commented on the usefulness of the final debrief, where the whole process and the student experience is discussed in an informal plenary meeting between DF students and staff, providing an opportunity for the perpetrators and investigators to discuss details of the "crimes", and enabling all groups to learn from all crimes and investigations. We conclude with a reflection on the challenges encountered and a discussion of planned changes.

Ecological drivers of a vector borne pathogen: distribution and abundance of Borrelia burgdorferi sensu lato and its vector Ixodes ricinus in Scotland

Vector-borne disease emergence in recent decades has been associated with different environmental drivers including changes in habitat, hosts and climate. Lyme borreliosis is among the most important vector-borne diseases in the Northern hemisphere and is an emerging disease in Scotland. Transmitted by Ixodid tick vectors between large numbers of wild vertebrate host species, Lyme borreliosis is caused by bacteria from the Borrelia burgdorferi sensu lato species group. Ecological studies can inform how environmental factors such as host abundance and community composition, habitat and landscape heterogeneity contribute to spatial and temporal variation in risk from B. burgdorferi s.l. In this thesis a range of approaches were used to investigate the effects of vertebrate host communities and individual host species as drivers of B. burgdorferi s.l. dynamics and its tick vector Ixodes ricinus. Host species differ in reservoir competence for B. burgdorferi s.l. and as hosts for ticks. Deer are incompetent transmission hosts for B. burgdorferi s.l. but are significant hosts of all life-stages of I. ricinus. Rodents and birds are important transmission hosts of B. burgdorferi s.l. and common hosts of immature life-stages of I. ricinus. In this thesis, surveys of woodland sites revealed variable effects of deer density on B. burgdorferi prevalence, from no effect (Chapter 2) to a possible ‘dilution’ effect resulting in lower prevalence at higher deer densities (Chapter 3). An invasive species in Scotland, the grey squirrel (Sciurus carolinensis), was found to host diverse genotypes of B. burgdorferi s.l. and may act as a spill-over host for strains maintained by native host species (Chapter 4). Habitat fragmentation may alter the dynamics of B. burgdorferi s.l. via effects on the host community and host movements. In this thesis, there was lack of persistence of the rodent associated genospecies of B. burgdorferi s.l. within a naturally fragmented landscape (Chapter 3). Rodent host biology, particularly population cycles and dispersal ability are likely to affect pathogen persistence and recolonization in fragmented habitats. Heterogeneity in disease dynamics can occur spatially and temporally due to differences in the host community, habitat and climatic factors. Higher numbers of I. ricinus nymphs, and a higher probability of detecting a nymph infected with B. burgdorferi s.l., were found in areas with warmer climates estimated by growing degree days (Chapter 2). The ground vegetation type associated with the highest number of I. ricinus nymphs varied between studies in this thesis (Chapter 2 & 3) and does not appear to be a reliable predictor across large areas. B. burgdorferi s.l. prevalence and genospecies composition was highly variable for the same sites sampled in subsequent years (Chapter 2). This suggests that dynamic variables such as reservoir host densities and deer should be measured as well as more static habitat and climatic factors to understand the drivers of B. burgdorferi s.l. infection in ticks. Heterogeneity in parasite loads amongst hosts is a common finding which has implications for disease ecology and management. Using a 17-year data set for tick infestations in a wild bird community in Scotland, different effects of age and sex on tick burdens were found among four species of passerine bird (Chapter 5). There were also different rates of decline in tick burdens among bird species in response to a long term decrease in questing tick pressure over the study. Species specific patterns may be driven by differences in behaviour and immunity and highlight the importance of comparative approaches. Combining whole genome sequencing (WGS) and population genetics approaches offers a novel approach to identify ecological drivers of pathogen populations. An initial analysis of WGS from B. burgdorferi s.s. isolates sampled 16 years apart suggests that there is a signal of measurable evolution (Chapter 6). This suggests demographic analyses may be applied to understand ecological and evolutionary processes of these bacteria. This work shows how host communities, habitat and climatic factors can affect the local transmission dynamics of B. burgdorferi s.l. and the potential risk of infection to humans. Spatial and temporal heterogeneity in pathogen dynamics poses challenges for the prediction of risk. New tools such as WGS of the pathogen (Chapter 6) and blood meal analysis techniques will add power to future studies on the ecology and evolution of B. burgdorferi s.l.

Strategic tillage in no-till farming systems in Australia's northern grains-growing regions: I. Drivers and implementation

Development of no-tillage (NT) farming has revolutionized agricultural systems by allowing growers to manage greater areas of land with reduced energy, labour and machinery inputs to control erosion, improve soil health and reduce greenhouse gas emission. However, NT farming systems have resulted in a build-up of herbicide-resistant weeds, an increased incidence of soil- and stubble-borne diseases and enrichment of nutrients and carbon near the soil surface. Consequently, there is an increased interest in the use of an occasional tillage (termed strategic tillage, ST) to address such emerging constraints in otherwise-NT farming systems. Decisions around ST uses will depend upon the specific issues present on the individual field or farm, and profitability and effectiveness of available options for management. This paper explores some of the issues with the implementation of ST in NT farming systems. The impact of contrasting soil properties, the timing of the tillage and the prevailing climate exert a strong influence on the success of ST. Decisions around timing of tillage are very complex and depend on the interactions between soil water content and the purpose for which the ST is intended. The soil needs to be at the right water content before executing any tillage, while the objective of the ST will influence the frequency and type of tillage implement used. The use of ST in long-term NT systems will depend on factors associated with system costs and profitability, soil health and environmental impacts. For many farmers maintaining farm profitability is a priority, so economic considerations are likely to be a primary factor dictating adoption. However, impacts on soil health and environment, especially the risk of erosion and the loss of soil carbon, will also influence a grower's choice to adopt ST, as will the impact on soil moisture reserves in rainfed cropping systems. © 2015 Elsevier B.V.

RestrictionDigest: A powerful Perl module for simulating genomic restriction digests

Background: Reduced-representation sequencing technology iswidely used in genotyping for its economical and efficient features. A popular way to construct the reduced-representation sequencing libraries is to digest the genomic DNA with restriction enzymes. A key factor of this method is to determine the restriction enzyme(s). But there are few computer programs which can evaluate the usability of restriction enzymes in reduced-representation sequencing. SimRAD is an R package which can simulate the digestion of DNA sequence by restriction enzymes and return enzyme loci number as well as fragment number. But for linkage mapping analysis, enzyme loci distribution is also an important factor to evaluate the enzyme. For phylogenetic studies, comparison of the enzyme performance across multiple genomes is important. It is strongly needed to develop a simulation tool to implement these functions. Results: Here, we introduce a Perl module named RestrictionDigest with more functions and improved performance. It can analyze multiple genomes at one run and generate concise comparison of enzyme performance across the genomes. It can simulate single-enzyme digestion, double-enzyme digestion and size selection process and generate comprehensive information of the simulation including enzyme loci number, fragment number, sequences of the fragments, positions of restriction sites on the genome, the coverage of digested fragments on different genome regions and detailed fragment length distribution. Conclusions: RestrictionDigest is an easy-to-use Perl module with flexible parameter settings.With the help of the information produced by the module, researchers can easily determine the most appropriate enzymes to construct the reduced-representation libraries to meet their experimental requirements.

Drivers of revenues and expenses in higher-education non-profit institutions

Double Degree

The bacterial helicase-primase interaction: a common structural/functional module

The lack of a high-resolution structure for the bacterial helicase-primase complex and the fragmented structural information for the individual proteins have been hindering our detailed understanding of this crucial binary protein interaction. Two new structures for the helicase-interacting domain of the bacterial primases from Escherichia coli and Bacillus stearothermophilus have recently been solved and both revealed a unique and surprising structural similarity to the amino-terminal domain of the helicase itself. In this minireview, the current data are discussed and important new structural and functional aspects of the helicase-primase interaction are highlighted. An attractive structural model with direct biological significance for the function of this complex and also for the development of new antibacterial compounds is examined.

TORP: The Open Robot Project A Framework for Module-Based Robots

The development of robots has shown itself as a very complex interdisciplinary research field. The predominant procedure for these developments in the last decades is based on the assumption that each robot is a fully personalized project, with the direct embedding of hardware and software technologies in robot parts with no level of abstraction. Although this methodology has brought countless benefits to the robotics research, on the other hand, it has imposed major drawbacks: (i) the difficulty to reuse hardware and software parts in new robots or new versions; (ii) the difficulty to compare performance of different robots parts; and (iii) the difficulty to adapt development needs-in hardware and software levels-to local groups expertise. Large advances might be reached, for example, if physical parts of a robot could be reused in a different robot constructed with other technologies by other researcher or group. This paper proposes a framework for robots, TORP (The Open Robot Project), that aims to put forward a standardization in all dimensions (electrical, mechanical and computational) of a robot shared development model. This architecture is based on the dissociation between the robot and its parts, and between the robot parts and their technologies. In this paper, the first specification for a TORP family and the first humanoid robot constructed following the TORP specification set are presented, as well as the advances proposed for their improvement.

Exergy analysis of a solar photovoltaic module

PV energy is the direct conversion of solar radiation into electricity. In this paper, an analysis of the influence of parameters such as global irradiance or temperature in the performance of a PV installation has been carried out. A PV module was installed in a building at the University of Málaga, and these parameters were experimentally determined for different days and different conditions of irradiance and temperature. Moreover, IV curves were obtained under these conditions to know the open-circuit voltage and the short-circuit current of the module. With this information, and using the first law of thermodynamics, an energy analysis was performed to determine the energy efficiency of the installation. Similarly, using the second law of thermodynamics, an exergy analysis is used to obtain the exergy efficiency. The results show that the energy efficiency varies between 10% and 12% and the exergy efficiency between 14% and 17%. It was concluded that the exergy analysis is more suitable for studying the performance, and that only electric exergy must be considered as useful exergy. This exergy efficiency can be improved if heat is removed from the PV module surface, and an optimal temperature is reached.

Protótipo de um microgerador termoelétrico de estado sólido: cogeração a gás

The thermoelectric energy conversion can be performed directly on generators without moving parts, using the principle of SEEBECK effect, obtained in junctions of drivers' thermocouples and most recently in semiconductor junctions type p-n which have increased efficiency of conversion. When termogenerators are exposed to the temperature difference (thermal gradient) eletromotriz a force is generated inducing the appearance of an electric current in the circuit. Thus, it is possible to convert the heat of combustion of a gas through a burner in power, being a thermoelectric generator. The development of infrared burners, using porous ceramic plate, is possible to improve the efficiency of heating, and reduce harmful emissions such as CO, CO2, NOx, etc.. In recent years the meliorate of thermoelectric modules semiconductor (TEG's) has stimulated the development of devices generating and recovery of thermal irreversibility of thermal machines and processes, improving energy efficiency and exergy these systems, especially processes that enable the cogeneration of energy. This work is based on the construction and evaluation of a prototype in a pilot scale, for energy generation to specific applications. The unit uses a fuel gas (LPG) as a primary energy source. The prototype consists of a porous plate burner infrared, an adapter to the module generator, a set of semiconductor modules purchased from Hi-Z Inc. and a heat exchanger to be used as cold source. The prototype was mounted on a test bench, using a system of acquisition of temperature, a system of application of load and instrumentation to assess its functioning and performance. The prototype had an efficiency of chemical conversion of 0.31% for electrical and heat recovery for cogeneration of about 33.2%, resulting in an overall efficiency of 33.51%. The efficiency of energy exergy next shows that the use of primary energy to useful fuel was satisfactory, although the proposed mechanism has also has a low performance due to underuse of the area heated by the small number of modules, as well as a thermal gradient below the ideal informed by the manufacturer, and other factors. The test methodology adopted proved to be suitable for evaluating the prototype