Flexão e análise dinâmico-mecânica de compósitos 5HS e NCF com resina epóxi monocomponente produzidos por RTM

In order to study resin distribution and homogeneity of composite laminates manufactured by RTM, it was used CYCOM 890 monolithic toughened epoxy as a matrix with two different configurations of intermediated modulus (IM) carbon fibers: Satin Weave (5HS) and non crimp fabric (NCF). The injection parameters were defined based on Thermo Gravimetric Analysis (TG), Differential Scanning Calorimetry (DSC) and rheological analysis. After processing the material, the resin/fiber impregnation was studied using ultrasonic test, Thermo Gravimetric Analysis, Differential Scanning Calorimetry, Dynamic Mechanical Analysis (DMA) and flexural tests. Therefore, it was able to observe an internal residual stress during the cooling process in both laminates, higher in the composite using NCF fabric due to the lack of symmetry, although a good proportion of fiber/matrix has been verified by the lower values of flexural modulus deviation. The DMA enabled the visualization of glass transition and its association with the inter and intra molecular interaction and movement, in which the NCF composite presented better permeability due to the lowest temperature of glass transition, when compared to the Satin Weave composite

Estudo dos fatores de virulência e resistência à oxacilina em Staphylococcus spp. isolados de aspirado traqueal de pacientes em ventilação mecânica internados em UTI

Patients that are mechanically ventilated in ICUs are constantly exposed to different pathogens, which present multiantibiotic resistance. Among these microorganisms, is MRSA (Meticillin-Resistant Staphylococcus aureus) considered to be a therapeutic challenge due to its resistance to β-lactam antibiotics. Therefore, this study proposed to identify species of Staphylococcus spp. isolated from mechanically ventilated patients in ICU, the gene mecA detection and the genes of the enterotoxins A (sea), B (seb), C (sec-1) and D (sed) in samples of S. aureus, as well as the phenotypic resistance determination to oxacillin using the disc-diffusion method with discs of oxacillin and cefoxitin. The samples collection occurred during in a period of 19 months, obtaining samples from 232 patients. A percentage of 39% (70) of Gram-positive cocci were found; which 82,8% (58) were identified as Staphylococcus spp,. among these, 75,8% (44) corresponded to S. aureus species and 47,7% were identified as MRSA. It was found resistance to both drugs in 31,8% of the S. aureus samples, 16 (36,3%) had the gene sea and 11 (25%) had the sec-1 gene. Among the coagulase-negative staphylococci obtained, the species most found was S. epidermidis, corresponding to 43% (6). The results revealed that one of the most important etiologic agents of VAP amid the Gram-positive cocci is the species S. aureus, with special attention to MRSA. The presence of enterotoxins genes in S. aureus did not showed determinant role in VAP, but the presence of these superantigens can contribute worsening the patient’s prognosis, since they are associated with intense inflammatory response

Efeito do tratamento alcalino da fibra na resistência mecânica do compósito epóxi/capim-sapê

Due to growing concerns for reducing environmental damage caused by the use of non-renewable raw materials, there is a growing demand for research related to aggregate technology with environmental preservation. Thus, the use of non-renewable materials and less aggressive materials has been gaining attention. About composite materials, the exchange of synthetic fibers by natural fibers, especially vegetable fiber as reinforcement, has been increasing, due to its physical-chemical properties such as mechanical strength, nontoxic, low cost, low density, processing flexibility, non-abrasive to the process equipment, requiring simple surface treatments, etc. This objective was to process composites reinforced with long fibers of sapegrass in epoxy matrix and characterize the composites through mechanical tests. Three groups of composites were prepared according to the treatment received by the reinforcement: without treatment, alkali treatment at concentration of 5% w/v and alkali treatment at 10% w/v concentration. The materials were analyzed by tensile and flexural, and tests also optical microscopy and scanning electron microscopy (SEM). The results were statistically analyzed. As the main result, the alkali treatment of 5% in the sapegrass fibers increases the tensile and flexural strength, as a consequence of the improve adhesion between matrix and reinforcement

Decisão making or buying: uma aplicação em células de manufatura de uma indústria de produção mecânica

In order to maintain the competitiveness the companies seek for cost reduction and resource optimization. A product or service price is calculated considering direct and indirect costs involved in its fabrication, which means that if an intern indirect process is optimized, the final price of the product is also reduced and becomes more interesting to the final costumer. Considering this reasoning, the companies must evaluate each of their processes and optimize them. It is common to outsource intern products manufacturing as a cost reduction strategy, nevertheless when there are already resources and capability to produce the own goods, it becomes necessary to evaluate the economic gain that each strategy - make or buy - generates. This paper aims to evaluate the necessary support to take a decision regarding making or buying in a production cell of hoses based in the value of economic cost, system cost and decision process

Transformada de Fourier: teoria como base para aplicações em mecânica celeste

Pós-graduação em Matemática Universitária - IGCE

Sistema de avaliação e tratamento da coluna lombar com o uso de tração mecânica

Pós-graduação em Engenharia Mecânica - FEG

Identificação de patógenos da cavidade bucal no lavado broncoalveolar de pacientes sob ventilação mecânica

Pós-graduação em Odontologia Restauradora - ICT

Peptídeos cíclicos hepatotóxicos: MALDI-TOF como uma ferramenta analítica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Validação de metodologia analítica para determinação de residual de detergente alcalino

O presente trabalho foi realizado nas dependências da FURP (Fundação para o Remédio Popular) de Américo Brasiliense - SP, com o objetivo de validar o método de determinação para residual de detergente alcalino nos equipamentos de revestimento de comprimidos. O trabalho foi desenvolvido no laboratório do Controle de Qualidade da FURP. A validação de limpeza é um tema pouco visto durante o curso de graduação em Farmácia - Bioquímica, porém bastante importante dentro da Indústria Farmacêutica. O processo de limpeza dos equipamentos utilizados na indústria farmacêutica deve ser validado para garantir a qualidade dos produtos. Determinar o residual de um produto de limpeza em um equipamento assegura que o agente de limpeza usado no processo, no caso o detergente alcalino, esteja em uma quantidade dentro do limite aceitável após a limpeza do equipamento. Primeiramente, validou-se o método analítico utilizado para determinar a quantidade de resíduo através da condutividade. Foram analisados os parâmetros linearidade, precisão e especificidade, que se encontraram dentro do limite permitido. Também foi realizado o estudo de recuperação (recovery) do resíduo de detergente do equipamento para confirmar a eficácia da técnica de amostragem juntamente com o método analítico quantitativo escolhido. Após a validação da metodologia analítica quantitativa e o estudo de recuperação foi possível definir um procedimento adequado para a análise do residual de detergente alcalino nos equipamentos submetidos ao processo de limpeza. Juntamente com o setor de Garantia da Qualidade, também foi realizado o estudo de validação da limpeza dos equipamentos da linha de sólidos da FURP (unidade Américo Brasiliense), neste estudo foi avaliado se o procedimento de limpeza estava sendo eficiente e também foi possível fazer a determinação de residual de detergente alcalino presente no equipamento após amostragem com swab, ...

A dominação masculina de Pierre Bourdieu: críticas e reflexões a partir da psicologia analítica

This bibliographical article aimed to analyze the work Masculine domination of Pierre Bourdieu, considering the concepts of Analytical Psychology from C. G. Jung. Among other issues, this psychological theory is based on the analysis of the masculine and feminine principles in order to bring a different apparatus for discussion of the ideas brought by Bourdieu that involves masculine domination. The Analytical Psychology concepts understand this domination from the patriarchal view of society, according to Bourdieu in submission question that this culture imposes on women. However, there were counterpoints regarding the quality and validation of female reference that Bourdieu’s theory seems to disqualify. Among the permanencies and changes of the structures that reproduce the masculine order, both theories show agreement with updates regarding the patriarchal structure.

Resistência à flexão em porcelana feldspática: efeito da ciclagem mecânica e limite de fadiga pelo método escada

This study evaluated the fatigue limit (FL) by the staircase method and the effect of mechanical cycling on the flexural strength (FS) of Duceragold feldspathic porcelain. Specimens (25 x 5 x 2 mm) were made according to manufacturer’s directions and submitted to three-point flexural strength test (n = 10). To determine FL (n = 30; 10,000 cycles; 2 Hz), an initial loading of 60% of the FS and an incremental loading (step) of 3% of the FS were used. Data were analyzed by Anova and Tukey´s test (p < 0.05). Although the proposed cycles have not reduced FS significantly, fractography analysis showed striation, characteristic signs of mechanical fatigue.

Comportamento biomecânico do sistema prótese/implante em região anterior de maxila: análise pelo método de ciclagem mecânica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Energia mecânica, energia térmica e moagem na extrusão de alimentos para cães e gatos

Pós-graduação em Medicina Veterinária - FCAV