Coping and adaptation against decreasing fish resources : case study of fishermen in Lake Inle, Myanmar

Fishermen depend on Lake Inle in Myanmar for their livelihood. However, the lake has been undergoing environmental degradation over the years. Adding to the long-term decrease in the catch because of this degradation, these fishermen faced extremely low water levels in 2010, which they had previously not experienced. Based on field surveys, this paper aims to reveal how fishermen adapted and coped with the changing environment as well as the sudden shock of the abnormally low water levels.

Balancing groundwater conservation and rural livelihoods under water and climate uncertainties: An integrated hydro-economic modeling framework

In arid countries worldwide, social conflicts between irrigation-based human development and the conservation of aquatic ecosystems are widespread and attract many public debates. This research focuses on the analysis of water and agricultural policies aimed at conserving groundwater resources and maintaining rurallivelihoods in a basin in Spain's central arid region. Intensive groundwater mining for irrigation has caused overexploitation of the basin's large aquifer, the degradation of reputed wetlands and has given rise to notable social conflicts over the years. With the aim of tackling the multifaceted socio-ecological interactions of complex water systems, the methodology used in this study consists in a novel integration into a common platform of an economic optimization model and a hydrology model WEAP (Water Evaluation And Planning system). This robust tool is used to analyze the spatial and temporal effects of different water and agricultural policies under different climate scenarios. It permits the prediction of different climate and policy outcomes across farm types (water stress impacts and adaptation), at basin's level (aquifer recovery), and along the policies’ implementation horizon (short and long run). Results show that the region's current quota-based water policies may contribute to reduce water consumption in the farms but will not be able to recover the aquifer and will inflict income losses to the rural communities. This situation would worsen in case of drought. Economies of scale and technology are evidenced as larger farms with cropping diversification and those equipped with modern irrigation will better adapt to water stress conditions. However, the long-term sustainability of the aquifer and the maintenance of rurallivelihoods will be attained only if additional policy measures are put in place such as the control of illegal abstractions and the establishing of a water bank. Within the policy domain, the research contributes to the new sustainable development strategy of the EU by concluding that, in water-scarce regions, effective integration of water and agricultural policies is essential for achieving the water protection objectives of the EU policies. Therefore, the design and enforcement of well-balanced region-specific polices is a major task faced by policy makers for achieving successful water management that will ensure nature protection and human development at tolerable social costs. From a methodological perspective, this research initiative contributes to better address hydrological questions as well as economic and social issues in complex water and human systems. Its integrated vision provides a valuable illustration to inform water policy and management decisions within contexts of water-related conflicts worldwide.

Perspectiva jurídica de la gestión y conservación de los recursos pesqueros en España. La pesca-turismo como opción de futuro

El objetivo de la presente Tesis está dirigido a analizar diversas opciones de diversificación que la pesca marítima profesional puede tener, poniendo el acento en el respeto al medio ambiente. En concreto la Pesca-turismo aparece como una de las alternativas más viables tanto por su respeto al medio ambiente como por su relativamente sencilla posibilidad de implantación en España. A fin de poder desarrollar la misma se proponen los cambios legislativos necesarios para su implantación en nuestro país procediéndose, para ello, al estudio de la situación actual de la actividad pesquera en nuestro país desde un punto de vista jurídico, con una especial consideración de la gestión y conservación de los recursos pesqueros. El estudio de su posible implantación en España, comienza analizando cuáles son las diferentes administraciones que influyen en dicha actividad y en qué medida lo hacen, tanto en el ámbito nacional como en el supranacional, con una especial referencia a la Unión Europea, así como la organización de las mismas. Acto seguido se procede al examen, tanto de la normativa sobre la materia, como de la jurisprudencia y la doctrina aplicables a la actividad de pesca marítima en España para, una vez llevado a cabo dicho estudio, comenzar con el examen de los requisitos exigidos, ya sean éstos de índole material o humana, a aquéllos que quieran llevarla a cabo. A continuación, se estudia el régimen de infracciones y sanciones, entrando, por último, en el terreno más propiamente de conservación de los recursos, donde se examinan las medidas que, a tal fin, se encuentran en nuestro ordenamiento jurídico. Más adelante se analiza, siquiera sea brevemente, la pesca deportiva, que, aunque con una incidencia muy inferior, no deja de ser otra forma de actividad extractiva. La existencia de otras experiencias parecidas a la propuesta de pesca-turismo en el ámbito internacional es objeto de estudio a fin de determinar cuál es la situación en otros países donde se hayan implantado con anterioridad. Para ello se lleva a cabo un análisis de las distintas soluciones que a este mismo problema se han dado en otros países también con amplia tradición en este campo procediendo, a tal fin, a un estudio de la legislación sobre la pesca-turismo, fundamentalmente en Italia, pero también en Francia y Portugal. A la vista de cuanto antecede es posible concluir que al día de hoy no es factible la realización de las actividades de Pesca-turismo con los instrumentos jurídicos de los que se dispone en España, dado que existen puntos sustanciales en los mismos que o bien impiden o bien no permiten su desarrollo. Por tanto el planteamiento de tales actividades necesariamente conlleva una serie de modificaciones normativas. El siguiente paso y en relación con las modificaciones normativas a efectuar, se ofrece un texto alternativo al texto legal a modificar (Ley 3/2001 de Pesca Marítima del Estado) y al Real Decreto 1027/1989, mientras que se dejan efectuados los apuntes precisos de cual debería de ser el marco reglamentario que, en desarrollo de las modificaciones anteriores, posibilitasen el ejercicio de la Pesca-turismo en España. Por último se ha optado por efectuar un análisis de la opinión del sector, tendente a verificar si los datos obtenidos empíricamente quedaban asimismo reflejados en las actitudes de los destinatarios finales de tales normas, que no serían otros que los pescadores profesionales. A tal fin se ha procedido a recoger las opiniones de diversos colectivos del sector, a través tanto de las cofradías de pescadores como de las Federaciones, acerca de las actividades de pesca-turismo, buscando la representación de todas las zonas geográficas. Fruto de tal investigación se ha llegado a la conclusión de que el desarrollo de las actividades propuesta de pescaturismo cuenta con una opinión favorable dentro del sector que, con una mayoría aplastante se manifestó a favor de desarrollar la posibilidad de ejercicio de la mismas. SUMMARY The objective of this thesis is aimed to analyze various options of diversification that commercial maritime fishing can have, with an emphasis on respect for the environment. Specifically, fishing-tourism appears as one of the most viable alternatives because of its environmental friendliness as well by its relatively simple possibility of implementation in Spain In order to develop it, it is proposed the necessary changes legislative for implementation in our country proceeding to study of the current situation of fisheries in our country from a legal perspective, with special consideration of the management and conservation of fisheries resources. The study of their possible implementation in Spain, begins by analyzing which are the different administrations that influence in that activity and to what extent they do, both at the national field as well at the supranational field, with special reference to the European Union and organization of thereof. Then proceeds to an examination, both of the relevant legislation as well as of the jurisprudence and doctrine applicable to maritime fishing in Spain for, once conducted this study, to begin with the consideration of the requirements, be they human or material, to those who want to carry out. Then studies the regime of offences and penalties, entering, finally, in the field conservation of resources, where discusses measures which, to this end, are in our legal system Later analyzes, even briefly, sport fishing, which, although with a much lower incidence, it is another form of extractive activity. The existence of other similar experiences to the proposal of fishing-tourism in the international arena is object of study in order to determine which is the situation in other countries where it has been implemented previously. For that it is carried out an analysis of the different solutions that to this same problem have been given in other countries with long tradition in this field, to proceed to study about legislation on fishing-tourism, fundamentally in Italy, but also in France and Portugal In view of the above it can be concluded that today is not feasible to implement the fishing-tourism activities with the legal instruments that are available in Spain, as there are substantial points which prevent them or not allows its development. Therefore the approach to such activities necessarily entails a series of normatives changes. The next step and in relation to normatives changes to do, it is offered an alternative text to the legal text to modify (Law 3/2001 of the State Marine Fisheries) and to the Royal Decree No. 1027 / 1989, while we leave made accurate notes about which ought be the reglamentary framework that, in developing of the above modifications, can be enable exercise of fishing-tourism in Spain. Finally, it is been opted to carry out an analysis of the opinion of the sector, aimed at verifying if data obtained empirically were also reflected in the attitudes of the final recipients of such standards, who would not be other than the professional fishermen. For this purpose it has been collected the opinions of various groups of the sector, through of fishermen's associations and federations, about of the activities of tourism-fishing, looking for the representation of all geographical areas. The result of such an investigation has concluded that the development of this proposed activities fishing-tourism has a positive opinion within the sector because an overwhelming majority was in favor of developing the possibility of exercise of the same.

Habitat management for conservation of pollinators in agro-ecosystems of Central Spain

La gestión de hábitat orientada a la conservación de polinizadores en los agro-ecosistemas requiere una selección de especies vegetales atendiendo fundamentalmente a dos criterios: i) el potencial atractivo de sus flores a los polinizadores; y ii) la simplicidad en su manejo agronómico. Además de estas premisas, es necesario considerar la capacidad invasora de estas especies vegetales, debido a que algunas de las más atractivas pueden resultar invasoras en determinados agro-ecosistemas. Por lo tanto, es preciso determinar qué especies vegetales son las más indicadas para ser implementadas en cada agro-ecosistema. En la presente tesis doctoral se plantea la búsqueda de las especies vegetales adecuadas para atraer polinizadores en los agro-ecosistemas del centro de España. En una primera aproximación, se ha evaluado la atracción y expansión espacial (potencial invasivo) de seis plantas perennes de la familia Lamiaceae (aromáticas), elegidas por ser nativas de la región mediterránea. La elección de las especies vegetales se ha llevado a cabo con el fin de crear márgenes funcionales basados en la mezcla de especies vegetales con distintos periodos de floración, de modo que prolonguen la disponibilidad de recursos florales en el tiempo. Tras un primer año dedicado al establecimiento de las especies aromáticas, en los dos años siguientes se ha estudiado la atracción individual y combinada de las especies vegetales sobre los polinizadores, y como ésta se ve afectada por la densidad y la morfología floral, utilizando para ello un diseño experimental en bloques al azar. Los resultados de este estudio han puesto de manifiesto que la morfología floral no tuvo influencia sobre la atracción de las especies vegetales, pero si la densidad floral, puesto que las especies vegetales con mayor densidad de flores (Nepeta tuberosa e Hyssopus officinalis) han mostrado mayor atracción a polinizadores. Cabe destacar que de las seis especies consideradas, dos especies de verano (Melissa officinalis y Thymbra capitata) no han contribuido de forma efectiva a la atracción de la mezcla hacia los polinizadores, mostrando una reducción significativa de este parámetro respecto a las otras especies aromáticas a lo largo del verano. Se ha observado que ninguna de las especies aromáticas evaluadas ha mostrado tendencia invasora a lo largo del estudio. En base a estos resultados, se puede concluir que entre las especies aromáticas estudiadas, N. tuberosa, H. officinalis y Salvia verbenaca son las que ofrecen mayor potencial para ser utilizadas en la conservación de polinizadores. De forma similar al caso de las plantas aromáticas, se ha llevado a cabo una segunda experimentación que incluía doce plantas anuales con floración de primavera, en la que se evaluó la atracción a polinizadores y su comportamiento agronómico. Este estudio con especies herbáceas se ha prolongado durante dos años, utilizando un diseño experimental de bloques aleatorios. Las variables analizadas fueron: el atractivo de las distintas especies vegetales a los polinizadores, su eficiencia de atracción (calculada como una combinación de la duración de la floración y las visitas de insectos), su respuesta a dos tipos de manejo agronómico (cultivo en mezcla frente a monocultivo; laboreo frente a no-laboreo) y su potencial invasivo. Los resultados de esta segunda experimentación han mostrado que las flores de Borago officinalis, Echium plantagineum, Phacelia tanacetifolia y Diplotaxis tenuifolia son atractivas a las abejas, mientras que las flores de Calendula arvensis, Coriandrum sativum, D. tenuifolia y Lobularia maritima son atractivas a los sírfidos. Con independencia del tipo de polinizadores atraídos por cada especie vegetal, se ha observado una mayor eficiencia de atracción en parcelas con monocultivo de D. tenuifolia respecto a las parcelas donde se cultivó una mezcla de especies herbáceas, si bien en estas últimas se observó mayor eficiencia de atracción que en la mayoría de parcelas mono-específicas. Respecto al potencial invasivo de las especies herbáceas, a pesar de que algunas de las más atractivas a polinizadores (P. tanacetifolia and C. arvensis) mostraron tendencia a un comportamiento invasor, su capacidad de auto-reproducción se vio reducida con el laboreo. En resumen, D. tenuifolia es la única especie que presentó una alta eficiencia de atracción a distintos tipos de polinizadores, conjuntamente con una alta capacidad de auto-reproducción pero sin mostrar carácter invasor. Comparando el atractivo de las especies vegetales utilizadas en este estudio sobre los polinizadores, D. tenuifolia es la especie más recomendable para su cultivo orientado a la atracción de polinizadores en agro-ecosistemas en el centro de España. Esta especie herbácea, conocida como rúcula, tiene la ventaja añadida de ser una especie comercializada para el consumo humano. Además de su atractivo a polinizadores, deben considerarse otros aspectos relacionados con la fisiología y el comportamiento de esta especie vegetal en los agro-ecosistemas antes de recomendar su cultivo. Dado que el cultivo en un campo agrícola de una nueva especie vegetal implica unos costes de producción, por ejemplo debidos a la utilización de agua de riego, es necesario evaluar el incremento en dichos costes en función de demanda hídrica específica de esa especie vegetal. Esta variable es especialmente importante en zonas dónde se presentan sequías recurrentes como es el caso del centro y sur-este de la península Ibérica. Este razonamiento ha motivado un estudio sobre los efectos del estrés hídrico por sequía y el estrés por déficit moderado y severo de riego sobre el crecimiento y floración de la especie D. tenuifolia, así como sobre la atracción a polinizadores. Los resultados muestran que tanto el crecimiento y floración de D. tenuifolia como su atracción a polinizadores no se ven afectados si la falta de riego se produce durante un máximo de 4 días. Sin embargo, si la falta de riego se extiende a lo largo de 8 días o más, se observa una reducción significativa en el crecimiento vegetativo, el número de flores abiertas, el área total y el diámetro de dichas flores, así como en el diámetro y longitud del tubo de la corola. Por otro lado, el estudio pone de manifiesto que un déficit hídrico regulado permite una gestión eficiente del agua, la cual, dependiendo del objetivo final del cultivo de D. tenuifolia (para consumo o solo para atracción de polinizadores), puede reducir su consumo entre un 40 y un 70% sin afectar al crecimiento vegetativo y desarrollo floral, y sin reducir significativamente el atractivo a los polinizadores. Finalmente, esta tesis aborda un estudio para determinar cómo afecta el manejo de hábitat a la producción de los cultivos. En concreto, se ha planteado una experimentación que incluye márgenes mono-específicos y márgenes con una mezcla de especies atractivas a polinizadores, con el fin de determinar su efecto sobre la producción del cultivo de cilantro (C. sativum). La elección del cultivo de cilantro se debe a que requiere la polinización de insectos para su reproducción (aunque, en menor medida, puede polinizarse también por el viento), además de la facilidad para estimar su producción en condiciones semi-controladas de campo. El diseño experimental consistía en la siembra de márgenes mono-específicos de D. tenuifolia y márgenes con mezcla de seis especies anuales situados junto al cultivo de cilantro. Estos cultivos con márgenes florales fueron comparados con controles sin margen floral. Además, un segundo grupo de plantas de cilantro situadas junto a todos los tratamientos, cuyas flores fueron cubiertas para evitar su polinización, sirvió como control para evaluar la influencia de los polinizadores en la producción del cultivo. Los resultados muestran que la presencia de cualquiera de los dos tipos de margen floral mejora el peso y el porcentaje de germinación de las semillas de cilantro frente al control sin margen. Si se comparan los dos tipos de margen, se ha observado un mayor número de semillas de cilantro junto al margen con mezcla de especies florales respecto al margen mono-específico, probablemente debido al mayor número visitas de polinizadores. Puesto que el experimento se realizó en condiciones de campo semi-controladas, esto sugiere que las visitas de polinizadores fueron el factor determinante en los resultados. Por otro lado, los resultados apuntan a que la presencia de un margen floral (ya sea mono-especifico o de mezcla) en cultivos de pequeña escala puede aumentar la producción de cilantro en más de un 200%, al tiempo que contribuyen a la conservación de los polinizadores. ABSTRACT Habitat management, aimed to conserve pollinators in agro-ecosystems, requires selection of the most suitable plant species in terms of their attractiveness to pollinators and simplicity of agronomic management. However, since all flowers are not equally attractive to pollinators and many plant species can be weedy or invasive in the particular habitat, it is important to test which plant species are the most appropriate to be implemented in specific agro-ecosystems. For that reason, this PhD dissertation has been focused on determination of the most appropriate aromatic and herbaceous plants for conservation of pollinators in agro-ecosystems of Central Spain. Therefore, in a first approximation, spatial expansion (i.e. potential weediness) and attractiveness to pollinators of six aromatic perennial plants from the Lamiaceae family, native and frequent in the Mediterranean region, were evaluated. Preliminary plant selection was based on designing a functional mixed margins consisting of plants attractive to pollinators and with different blooming periods, in order to extend the availability of floral resources in the field. After a year of vegetative growth, the next two years the plant species were studied in a randomized block design experiment in order to estimate their attractiveness to pollinators in Central Spain and to investigate whether floral morphology and density affect attractiveness to pollinators. The final aim of the study was to evaluate how their phenology and attractiveness to pollinators can affect the functionality of a flowering mixture of these plants. In addition, the spatial expansion, i.e. potential weediness, of the selected plant species was estimated under field conditions, as the final purpose of the studied plants is to be implemented within agro-ecosystems. The results of the experiment showed that floral morphology did not affect the attractiveness of plants to pollinators, but floral density did, as plant species with higher floral density (i.e. Nepeta tuberosa and Hyssopus officinalis) showed significantly higher attractiveness to pollinators. In addition, of six plant species, two summer species (Melissa officinalis and Thymbra capitata) did not efficiently contribute to the attractiveness of the mixture to pollinators, which reduced its attractiveness during the summer period. Finally, as none of the plants showed weedy behaviour under field conditions, the attractive plant species, i.e. N. tuberosa, H. officinalis and the early spring flowering Salvia verbenaca, showed good potential to conserve the pollinators. Similarly, in a second approximation, the attractiveness to pollinators and agronomic behaviour of twelve herbaceous plants blooming in spring were studied. This experiment was conducted over two years in a randomized block design in order to evaluate attractiveness of preselected plant species to pollinators, as well as their attractiveness efficiency (a combination of duration of flowering and insect visitation), their response to two different agronomic management practices (growing in mixed vs. mono-specific plots; tillage vs. no-tillage), and their potential weediness. The results of this experiment showed that the flowers of Borago officinalis, Echium plantagineum, Phacelia tanacetifolia and Diplotaxis tenuifolia were attractive to bees, while Calendula arvensis, Coriandrum sativum, D. tenuifolia and Lobularia maritima were attractive to hoverflies. In addition, floral mixture resulted in lower attractiveness efficiency to pollinators than mono-specific D. tenuifolia, but higher than most of the mono-specific stands. On the other hand, although some of the most attractive plant species (e.g. P. tanacetifolia and C. arvensis) showed potential weediness, their self-seeding was reduced by tillage. After comparing attractiveness efficiency of various herbaceous species to pollinators and their potential weediness, the results indicated that D. tenuifolia showed the highest attractiveness efficiency to pollinators and efficient self-reproduction, making it highly recommended to attract bees and hoverflies in agro-ecosystems of Central Spain. In addition, this plant, commonly known as wild rocket, has a supplementary economic value as a commercialized crop. The implementation of a new floral margin in agro-ecosystems means increased production costs, especially in regions with frequent and long droughts (as it is Central and South-East area of Iberian Peninsula), where the principal agricultural cost is irrigation. Therefore, before recommending D. tenuifolia for sustainable habitat management within agro-ecosystems, it is necessary to study the effect of drought stress and moderate and severe deficit irrigation on its growth, flower development and attractiveness to pollinators. The results of this experiment showed that in greenhouse conditions, potted D. tenuifolia could be without irrigation for 4 days without affecting its growth, flowering and attractiveness to pollinators. However, lack of irrigation for 8 days or longer significantly reduced the vegetative growth, number of open flowers, total floral area, flower diameter, corolla tube diameter and corolla tube length of D. tenuifolia. This study showed that regulated deficit irrigation can improve water use efficiency, and depending on the purpose of growing D. tenuifolia, as a crop or as a beneficial plant to attract pollinators, it can reduce water consumption by 40% to 70% without affecting its vegetative and floral development and without reducing its attractiveness to pollinators. Finally, the following experiment was developed in order to understand how habitat management can influence on the agricultural production. For this purpose, it was evaluated if the vicinity of mixed and mono-specific field margins, preselected to conserve pollinators within agro-ecosystems, can improve seed production in coriander (C. sativum). The selection of this plant species for the experiment was based on its necessity for insect pollination for production of seeds (even though some pollen can be transmitted from one flower to another by wind) and the fact that under semi-controlled field conditions established in the field it is possible to estimate its total seed production. Since D. tenuifolia is attractive for both bees and hoverflies in Central Spain, the main objective of this experiment was to estimate the impact of two different types of field margins, i.e. mono-specific margin with D. tenuifolia and mixed margin with six herbaceous species, on the seed production of potted coriander. For that reason, it was tested: i) if open pollination (control without proximate field margin and treatments with nearby mono-specific and mixed margin) increases the seed production of coriander when compared with no-pollination (covered inflorescences of coriander) under field conditions; ii) if frequency of pollinator visitation to the flowers of coriander was higher in the presence of field margins than in the control without field margin; and iii) if seed production was higher in the presence of field margins than in control plants of coriander without field margin. The results showed that the proximity of both types of floral margins (mixed and mono-specific) improved the seed quality of coriander plants, as seed weight and germination rate were higher than in control plants without field margin. Furthermore, the number of seeds produced was significantly higher in coriander plants grown near mixed margins than near mono-specific margin, probably due to an increase in pollinator visits. Since the experiment was conducted under semi-controlled field conditions, it can be concluded that pollinator visits was the main factor that biased the results, and that presence of both mixed or mono-specific (D. tenuifolia) margins can improve the production of coriander for more than 200% in small-scale gardens and, in addition, conserve the local pollinators.

LiDAR remote sensing applied to forest resources assessment

Disponer de información precisa y actualizada de inventario forestal es una pieza clave para mejorar la gestión forestal sostenible y para proponer y evaluar políticas de conservación de bosques que permitan la reducción de emisiones de carbono debidas a la deforestación y degradación forestal (REDD). En este sentido, la tecnología LiDAR ha demostrado ser una herramienta perfecta para caracterizar y estimar de forma continua y en áreas extensas la estructura del bosque y las principales variables de inventario forestal. Variables como la biomasa, el número de pies, el volumen de madera, la altura dominante, el diámetro o la altura media son estimadas con una calidad comparable a los inventarios tradicionales de campo. La presente tesis se centra en analizar la aplicación de los denominados métodos de masa de inventario forestal con datos LIDAR bajo diferentes condiciones y características de masa forestal (bosque templados puros y mixtos) y utilizando diferentes bases de datos LiDAR (información proveniente de vuelo nacionales e información capturada de forma específica). Como consecuencia de lo anterior, se profundiza en la generación de inventarios forestales continuos con LiDAR en grandes áreas. Los métodos de masa se basan en la búsqueda de relaciones estadísticas entre variables predictoras derivadas de la nube de puntos LiDAR y las variables de inventario forestal medidas en campo con el objeto de generar una cartografía continua de inventario forestal. El rápido desarrollo de esta tecnología en los últimos años ha llevado a muchos países a implantar programas nacionales de captura de información LiDAR aerotransportada. Estos vuelos nacionales no están pensados ni diseñados para fines forestales por lo que es necesaria la evaluación de la validez de esta información LiDAR para la descripción de la estructura del bosque y la medición de variables forestales. Esta información podría suponer una drástica reducción de costes en la generación de información continua de alta resolución de inventario forestal. En el capítulo 2 se evalúa la estimación de variables forestales a partir de la información LiDAR capturada en el marco del Plan Nacional de Ortofotografía Aérea (PNOA-LiDAR) en España. Para ello se compara un vuelo específico diseñado para inventario forestal con la información de la misma zona capturada dentro del PNOA-LiDAR. El caso de estudio muestra cómo el ángulo de escaneo, la pendiente y orientación del terreno afectan de forma estadísticamente significativa, aunque con pequeñas diferencias, a la estimación de biomasa y variables de estructura forestal derivadas del LiDAR. La cobertura de copas resultó más afectada por estos factores que los percentiles de alturas. Considerando toda la zona de estudio, la estimación de la biomasa con ambas bases de datos no presentó diferencias estadísticamente significativas. Las simulaciones realizadas muestran que las diferencias medias en la estimación de biomasa entre un vuelo específico y el vuelo nacional podrán superar el 4% en áreas abruptas, con ángulos de escaneo altos y cuando la pendiente de la ladera no esté orientada hacia la línea de escaneo. En el capítulo 3 se desarrolla un estudio en masas mixtas y puras de pino silvestre y haya, con un enfoque multi-fuente empleando toda la información disponible (vuelos LiDAR nacionales de baja densidad de puntos, imágenes satelitales Landsat y parcelas permanentes del inventario forestal nacional español). Se concluye que este enfoque multi-fuente es adecuado para realizar inventarios forestales continuos de alta resolución en grandes superficies. Los errores obtenidos en la fase de ajuste y de validación de los modelos de área basimétrica y volumen son similares a los registrados por otros autores (usando un vuelo específico y parcelas de campo específicas). Se observan errores mayores en la variable número de pies que los encontrados en la literatura, que pueden ser explicados por la influencia de la metodología de parcelas de radio variable en esta variable. En los capítulos 4 y 5 se evalúan los métodos de masa para estimar biomasa y densidad de carbono en bosques tropicales. Para ello se trabaja con datos del Parque Nacional Volcán Poás (Costa Rica) en dos situaciones diferentes: i) se dispone de una cobertura completa LiDAR del área de estudio (capitulo 4) y ii) la cobertura LiDAR completa no es técnica o económicamente posible y se combina una cobertura incompleta de LiDAR con imágenes Landsat e información auxiliar para la estimación de biomasa y carbono (capitulo 5). En el capítulo 4 se valida un modelo LiDAR general de estimación de biomasa aérea en bosques tropicales y se compara con los resultados obtenidos con un modelo ajustado de forma específica para el área de estudio. Ambos modelos están basados en la variable altura media de copas (TCH por sus siglas en inglés) derivada del modelo digital LiDAR de altura de la vegetación. Los resultados en el área de estudio muestran que el modelo general es una alternativa fiable al ajuste de modelos específicos y que la biomasa aérea puede ser estimada en una nueva zona midiendo en campo únicamente la variable área basimétrica (BA). Para mejorar la aplicación de esta metodología es necesario definir en futuros trabajos procedimientos adecuados de medición de la variable área basimétrica en campo (localización, tamaño y forma de las parcelas de campo). La relación entre la altura media de copas del LiDAR y el área basimétrica (Coeficiente de Stock) obtenida en el área de estudio varía localmente. Por tanto es necesario contar con más información de campo para caracterizar la variabilidad del Coeficiente de Stock entre zonas de vida y si estrategias como la estratificación pueden reducir los errores en la estimación de biomasa y carbono en bosques tropicales. En el capítulo 5 se concluye que la combinación de una muestra sistemática de información LiDAR con una cobertura completa de imagen satelital de moderada resolución (e información auxiliar) es una alternativa efectiva para la realización de inventarios continuos en bosques tropicales. Esta metodología permite estimar altura de la vegetación, biomasa y carbono en grandes zonas donde la captura de una cobertura completa de LiDAR y la realización de un gran volumen de trabajo de campo es económica o/y técnicamente inviable. Las alternativas examinadas para la predicción de biomasa a partir de imágenes Landsat muestran una ligera disminución del coeficiente de determinación y un pequeño aumento del RMSE cuando la cobertura de LiDAR es reducida de forma considerable. Los resultados indican que la altura de la vegetación, la biomasa y la densidad de carbono pueden ser estimadas en bosques tropicales de forma adecuada usando coberturas de LIDAR bajas (entre el 5% y el 20% del área de estudio). ABSTRACT The availability of accurate and updated forest data is essential for improving sustainable forest management, promoting forest conservation policies and reducing carbon emissions from deforestation and forest degradation (REDD). In this sense, LiDAR technology proves to be a clear-cut tool for characterizing forest structure in large areas and assessing main forest-stand variables. Forest variables such as biomass, stem volume, basal area, mean diameter, mean height, dominant height, and stem number can be thus predicted with better or comparable quality than with costly traditional field inventories. In this thesis, it is analysed the potential of LiDAR technology for the estimation of plot-level forest variables under a range of conditions (conifer & broadleaf temperate forests and tropical forests) and different LiDAR capture characteristics (nationwide LiDAR information vs. specific forest LiDAR data). This study evaluates the application of LiDAR-based plot-level methods in large areas. These methods are based on statistical relationships between predictor variables (derived from airborne data) and field-measured variables to generate wall to wall forest inventories. The fast development of this technology in recent years has led to an increasing availability of national LiDAR datasets, usually developed for multiple purposes throughout an expanding number of countries and regions. The evaluation of the validity of nationwide LiDAR databases (not designed specifically for forest purposes) is needed and presents a great opportunity for substantially reducing the costs of forest inventories. In chapter 2, the suitability of Spanish nationwide LiDAR flight (PNOA) to estimate forest variables is analyzed and compared to a specifically forest designed LiDAR flight. This study case shows that scan angle, terrain slope and aspect significantly affect the assessment of most of the LiDAR-derived forest variables and biomass estimation. Especially, the estimation of canopy cover is more affected than height percentiles. Considering the entire study area, biomass estimations from both databases do not show significant differences. Simulations show that differences in biomass could be larger (more than 4%) only in particular situations, such as steep areas when the slopes are non-oriented towards the scan lines and the scan angles are larger than 15º. In chapter 3, a multi-source approach is developed, integrating available databases such as nationwide LiDAR flights, Landsat imagery and permanent field plots from SNFI, with good resultos in the generation of wall to wall forest inventories. Volume and basal area errors are similar to those obtained by other authors (using specific LiDAR flights and field plots) for the same species. Errors in the estimation of stem number are larger than literature values as a consequence of the great influence that variable-radius plots, as used in SNFI, have on this variable. In chapters 4 and 5 wall to wall plot-level methodologies to estimate aboveground biomass and carbon density in tropical forest are evaluated. The study area is located in the Poas Volcano National Park (Costa Rica) and two different situations are analyzed: i) available complete LiDAR coverage (chapter 4) and ii) a complete LiDAR coverage is not available and wall to wall estimation is carried out combining LiDAR, Landsat and ancillary data (chapter 5). In chapter 4, a general aboveground biomass plot-level LiDAR model for tropical forest (Asner & Mascaro, 2014) is validated and a specific model for the study area is fitted. Both LiDAR plot-level models are based on the top-of-canopy height (TCH) variable that is derived from the LiDAR digital canopy model. Results show that the pantropical plot-level LiDAR methodology is a reliable alternative to the development of specific models for tropical forests and thus, aboveground biomass in a new study area could be estimated by only measuring basal area (BA). Applying this methodology, the definition of precise BA field measurement procedures (e.g. location, size and shape of the field plots) is decisive to achieve reliable results in future studies. The relation between BA and TCH (Stocking Coefficient) obtained in our study area in Costa Rica varied locally. Therefore, more field work is needed for assessing Stocking Coefficient variations between different life zones and the influence of the stratification of the study areas in tropical forests on the reduction of uncertainty. In chapter 5, the combination of systematic LiDAR information sampling and full coverage Landsat imagery (and ancillary data) prove to be an effective alternative for forest inventories in tropical areas. This methodology allows estimating wall to wall vegetation height, biomass and carbon density in large areas where full LiDAR coverage and traditional field work are technically and/or economically unfeasible. Carbon density prediction using Landsat imaginery shows a slight decrease in the determination coefficient and an increase in RMSE when harshly decreasing LiDAR coverage area. Results indicate that feasible estimates of vegetation height, biomass and carbon density can be accomplished using low LiDAR coverage areas (between 5% and 20% of the total area) in tropical locations.

Conservation of Computational Scientific Execution Environments for Workflow-based Experiments Using Ontologies

La reproducibilidad de estudios y resultados científicos es una meta a tener en cuenta por cualquier científico a la hora de publicar el producto de una investigación. El auge de la ciencia computacional, como una forma de llevar a cabo estudios empíricos haciendo uso de modelos matemáticos y simulaciones, ha derivado en una serie de nuevos retos con respecto a la reproducibilidad de dichos experimentos. La adopción de los flujos de trabajo como método para especificar el procedimiento científico de estos experimentos, así como las iniciativas orientadas a la conservación de los datos experimentales desarrolladas en las últimas décadas, han solucionado parcialmente este problema. Sin embargo, para afrontarlo de forma completa, la conservación y reproducibilidad del equipamiento computacional asociado a los flujos de trabajo científicos deben ser tenidas en cuenta. La amplia gama de recursos hardware y software necesarios para ejecutar un flujo de trabajo científico hace que sea necesario aportar una descripción completa detallando que recursos son necesarios y como estos deben de ser configurados. En esta tesis abordamos la reproducibilidad de los entornos de ejecución para flujos de trabajo científicos, mediante su documentación usando un modelo formal que puede ser usado para obtener un entorno equivalente. Para ello, se ha propuesto un conjunto de modelos para representar y relacionar los conceptos relevantes de dichos entornos, así como un conjunto de herramientas que hacen uso de dichos módulos para generar una descripción de la infraestructura, y un algoritmo capaz de generar una nueva especificación de entorno de ejecución a partir de dicha descripción, la cual puede ser usada para recrearlo usando técnicas de virtualización. Estas contribuciones han sido aplicadas a un conjunto representativo de experimentos científicos pertenecientes a diferentes dominios de la ciencia, exponiendo cada uno de ellos diferentes requisitos hardware y software. Los resultados obtenidos muestran la viabilidad de propuesta desarrollada, reproduciendo de forma satisfactoria los experimentos estudiados en diferentes entornos de virtualización. ABSTRACT Reproducibility of scientific studies and results is a goal that every scientist must pursuit when announcing research outcomes. The rise of computational science, as a way of conducting empirical studies by using mathematical models and simulations, have opened a new range of challenges in this context. The adoption of workflows as a way of detailing the scientific procedure of these experiments, along with the experimental data conservation initiatives that have been undertaken during last decades, have partially eased this problem. However, in order to fully address it, the conservation and reproducibility of the computational equipment related to them must be also considered. The wide range of software and hardware resources required to execute a scientific workflow implies that a comprehensive description detailing what those resources are and how they are arranged is necessary. In this thesis we address the issue of reproducibility of execution environments for scientific workflows, by documenting them in a formalized way, which can be later used to obtain and equivalent one. In order to do so, we propose a set of semantic models for representing and relating the relevant information of those environments, as well as a set of tools that uses these models for generating a description of the infrastructure, and an algorithmic process that consumes these descriptions for deriving a new execution environment specification, which can be enacted into a new equivalent one using virtualization solutions. We apply these three contributions to a set of representative scientific experiments, belonging to different scientific domains, and exposing different software and hardware requirements. The obtained results prove the feasibility of the proposed approach, by successfully reproducing the target experiments under different virtualization environments.

Enhancing Conservation Options: An Argument for Statutory Recognition of Options to Purchase Conservation Easements (OPCEs)

The most dynamic component of the conservation movement in the United States for the past three decades has been land conservation transactions. In the United States, land conservation organizations have protected roughly 40 million acres of land through transactions. Most of these acres have been protected using conservation easements. Climate change threatens the vast conservation edifice created by land conservation transactions. The tools of land conservation transactions are, traditionally, stationary. Climate change means that the resources that land conservation transactions were intended to protect may no longer remain on the land protected. Options to purchase conservation easements (OPCEs) have long played a modest but important role in conservation law practice. In the world climate change is creating, with its substantial uncertainties and shifting windows of opportunity, OPCEs can serve more complicated and strategic purposes. The ability of OPCEs to serve important roles in protecting land in the context of uncertainty would be significantly increased if state legislatures amend current conservation easement statutes to (1) specifically recognize OPCEs, (2) immunize OPCEs from a range of potential common law challenges, (3) guarantee the durability and transferability of OPCEs, and (4) integrate OPCEs into the burgeoning body of conservation easement law. These statutory amendments would do for OPCEs what conservation easement statutes have done for conservation easements: transform them into an essential multi-purpose tool for conservation in a changing world.

Recommendations for Soil and Water Conservation Programs

The United States Department of Agriculture employs soil and water conservation programs to assist with the sustainable use of natural resources in balance with economic vitality in rural America. This capstone project analyzed soil and water conservation programs to identify strengths, weaknesses, and methods to maximize environmental benefits. There are many requirements for participation in these programs which are difficult for most agricultural producers to comprehend. Research indicates in order to accomplish the goals of federal conservation programs and assist individuals, a method must be developed to effectively present information in a concise manner. This capstone project created a communicative measure, a template, to disseminate pertinent knowledge on soil and water conservation programs, thereby filling a void in existing literature.

Candidate Conservation Agreements to Minimize Military Conflicts with Wildlife Laws: The Gopher Tortoise (Gopherus polyphemus)

The proposed Endangered Species Act listing of the gopher tortoise has the potential to impact the military mission at installations in the southeastern United States. Candidate Conservation Agreements with the U.S. Fish and Wildlife Service could be a tool to promote conservation and potentially preclude listing. This project identified military activities that could be affected and determined that military natural resources managers are unsure if such an agreement would prevent impacts to the military mission or impose the same restrictions as federal listing. This project found that if a gopher tortoise Candidate Conservation Agreement can be developed such that it benefits the species as well as the military, it should be used as a model for other species.

Trees as Tools in Environmental Improvement; An Analysis of the Contribution of Vegetation to Energy and Water Conservation in the Front Range of Colorado

The Denver metropolitan area is facing rapid population growth that increases the stress on already limited resources. Research and advanced computer modeling show that trees, especially those in urban areas, have significant environmental benefits. These benefits include air quality improvements, energy savings, greenhouse gas reduction, and possible water conservation. This Capstone Project applies statistical methods to analyze a small data set of residential homes and their energy and water consumption, as a function of their individual landscape. Results indicate that tree shade can influence water conservation, and that irrigation methods can be an influential factor as well. The Capstone is a preliminary analysis for future study to be performed by the Institute for Environmental Solutions in 2007.

Annual report of the Conservation Commission.

1914

Local community perception towards bats (Mammalia: Chiroptera) in Caves in South central Mindanao, Philippines: Threats and Implication for conservation

In the tropics, bats are an essential component of many native ecosystems, through providing various ecological services including pollination and insect pest control, in addition to seed dispersal. Many Philippine bat species roost in caves and underground habitats. However, many caves are disturbed by people, to exploit resources for food, recreation, and mineral and guano extraction. The misunderstanding of the importance of bats to the ecosystem is also considered a threat to many cave roosting species. Understanding the conflicts between humans and ecosystems which provide essential services is important to maintain ecosystem service provision. A total of 100 local respondents from the village of Pisan, Kabacan North Cotabato in south central Mindanao were interviewed through semi-structured interviews and focus group discussions. Respondents were asked about their views, levels of knowledge, use, interaction, and awareness towards both the caves and bats in their locality. Our survey found that most of the respondents are aware of the presence of bats from the caves in their locality. Unfortunately, a large proportion of the respondents noted that bats are hunted in caves for bush meat and trade, and most people perceived bats as pest to fruit crops such as durian. These factors are among the main factors of the execution of many bat colonies in caves of south central Mindanao. In general, cave bats are under appreciated species in caves. The unregulated tourism, hunting for bush meat and trade, and guano extraction are among the alarming threats occurring for both caves and bats in the locality and possibly to other localities in the country. Furthermore, the establishment of strong and effective model conservation education programs and the strengthening the participation of local government, academic, and community are essential steps to preserve the current state of cave bats in the area.

The autonomy of the EU legal order and the law-making activities of international organizations. Some examples regarding the Council most recent practice. Research Papers in Law 03/2012

[Introduction.] It is generally believed that while the principle of the autonomy of the EU legal order, in the sense of constitutional and institutional autonomy that is to say what concerns the autonomous decision-making of the EU, has been clearly strengthened by the most recent jurisprudence of the Court of Justice (eg. Moxplant3, Intertanko or the Kadi/Al Baraakat judgements or the Opinion 1/2009 of the CJEU etc.) as well as, in my opinion, in many aspects by the Treaty of Lisbon, it is still valid to add that the principle of a favourable approach, stemming from the Court jurisprudence, for the enhanced openness of the EU legal order to international law has remained equally important for the EU4. On the other hand, it should be also seen that in a globalized world, and following the increased role of the EU as an international actor, its indispensable and crucial role concerning the creation of world (legal) order in many policy fields ( for example let's think about the G20 issues, the global economic and financial crisis, the role of the EU in promoting and protecting human rights worldwide, the implementation of the multilateral or regional conventional law, developed in the framework the UN (e.g. in the field of agriculture or environment etc) or what concerns the Kyoto process on climate change or the conservation of marine biological resources at international level etc), it seems reasonable and justified to submit that the influence, for example, of the law-making activities of the main stakeholder international organizations in the mentioned policy-areas on the EU (especially on the development of its constantly evolving legal order) or vice-versa the influence of the EU law-making practice on these international organizations is significant, in many aspects mutually interdependent and more and more remarkable. This tendency of the 21st century doesn't mean, however, in my view, that the notion of the autonomy of the EU legal order would have been weakened by this increasing interaction between international law and EU law over the passed years. This contribution is going to demonstrate and prove these departuring points by giving some concrete examples from the most recent practice of the Council (all occuring either in the second half of 2009 or after the entry into force of the Lisbon Treaty), and which relate to two very important policy areas in the EU, namely the protection of human rights and the Common Fishery Policy.

Assessment of Socio-Economic and Climate Change Effects on Water Resources and Agriculture in Southern and Eastern Mediterranean countries. MEDPRO Technical Paper No. 28/March 2013

This study aims at assessing the socio-economic and environmental effects of different societal and human development scenarios and climate change in the water-scarce southern and eastern Mediterranean. The study develops a two-stage modelling methodology that includes an econometric analysis for the southern and eastern Mediterranean region as a whole and a detailed, integrated socioecological assessment focusing on Jordan, Syria and Morocco. The results show that water resources will be under increasing stress in future years. In spite of country differences, a future path of sustainable development is possible in the region. Water withdrawals could decrease, preserving renewable water resources and reversing the negative effects on agricultural production and rural society. This, however, requires a combination across the region of technical, managerial, economic, social and institutional changes that together foster a substantive structural change. A balanced implementation of water supply-enhancing and demand-management measures along with improved governance are key to attaining a cost-effective sustainable future in which economic growth, a population increase and trade expansion are compatible with the conservation of water resources.