963 resultados para Mangaba - Armazenamento
Resumo:
Este trabajo tubo como objetivo estudiar el efecto combinado de la deshidratación osmótica y la influencia del cloruro de calcio en rodajas de kivi sometidos al proceso mínimo. Muestras con y sin deshidratación osmótica fueron almacenadas a 5 °C en embalajes PET. La adición de cloruro de calcio fue realizada durante la deshidratación osmótica. Se evaluaron la pérdida de peso, acidez, sólidos solubles, pH, humedad, coliformes, hongos y levaduras en las muestras hasta 15 días de almacenamiento. La deshidratación osmótica consistió en la inmersión de las rodajas de kivi en solución de sacarosa a 60% y en solución de sacarosa (60%) con adición de cloruro de calcio (0,1 M), ambos tratamientos se realizaron a temperatura ambiente (25 °C) por 24 horas y relación fruta:solución de 1:5. Los resultados mostraron que el pré-tratamiento osmótico con adición de cloruro de calcio aumentó la vida útil hasta 15 días, en cuanto las rodajas tratadas por osmodeshidratación sin adición de sal presentaron vida útil de 12 días. Sensorialmente, los consumidores prefirieron las rodajas de kivi procesadas con pré-tratamiento osmótico y adición de cloruro de calcio.
Resumo:
Brazil is one of the major centers of diversity for polyploid cotton plants; these plants belong to the genus Gossypium, which has three known species: G. hirsutum, G. barbadense and G. mustelinum. The Northeast is the only region where the three species occur, the last group being endemic. Northeast s cotton plants can be important sources of variability for genetic breeding. It is believed that great part of local diversity is being lost, due to economic, political, cultural and agricultural problems. In an attempt to mitigate this loss and delineate conservation strategies it is necessary to know how the species are found where they occur. The objective was to characterize and determine how plants are maintained in situ in the states of Maranhão, Piauí, Ceará, Rio Grande do Norte and Paraíba at the beginning of the XXI century. The in situ characterization of G. hirsutum and G. barbadense was conducted through structured interviews with the cotton plants owners and through the analysis of the environment. The data were collected during expeditions undertaken between the years 2004 to 2005. Twenty-two plants were collected in the state of Paraíba, forty-four in the state of Rio Grande do Norte, one hundred and forty-six in the state of Ceará, forty in the state of Maranhão and ninety-one plants in the state of Piauí. All plants collected in the states of Paraíba and Rio Grande do Norte belonged to moco type. Moco cotton plants also predominated in the other states, representing 92%, 62% and 78% of plants collected in Ceará, Piauí and Maranhão, respectively. The other cotton plants collected belong to the species G. barbadense. The cotton plants were found in situ as dooryard plants, roads side, feral populations, cultivation or local varieties. Great part were dooryard plants (45.2%), being major in Piauí and Maranhão. Cultivation predominated in Ceará; in Rio Grande do Norte feral populations were the most frequent and, in Paraíba, local varieties. The maintenance of moco plants is related, mainly, to the phytotherapic domestic use (20.9%) and to confection of lamp wicks (29.7%). Few inhabitants in Paraíba, Rio Grande do Norte, Piauí and none in Maranhão used harvest the plants, storage the seeds or gin; however, in Ceará, 40.5% of owners affirmed that they harvested and commercialized the fiber. It was found that the maintenance of species is dependent of the fragile cultural habits of local inhabitants, therefore the maintenance in situ is not a suitable way to conservation of genetic resources. The efforts must be directed to the continuity of collections, maintenance and characterization ex situ
Resumo:
Brazil has been considered one of the diversity centers of Gossypium barbadense species. It is believed that a relatively big erosion genetic process occurs with the species, due to economic, cultural and agricultural problems. A local diagnostic about species situation is the first step for reducing the diversity loss and establishing conservation strategies in situ. This research aimed the identification of the presence of Gossypium populations, characterization, determination of the main risks and collection of the accesses to store in germoplam banks, in Para and Amapa States. Expeditions were conducted in November 2004. An interview was carried out with the plant proprietor for characterizing in situ of G. barbadense species and of the environment where the plants were inserted. On hundred seventy nine plants in 22 municipal districts were collected in Para State and 117 plants in nine municipal districts in Amapa State. The majority of plants belong to G. barbadense species (98% in Amapa and 94% in Para). Plants occur in back yards, beside roads and spontaneously. That ones from back yards were more abundant (97% in Amapa and 95% in Para) and maintained as medicinal plants as the principal reason. Plants in natural environments in both states evaluated were not found, therefore, the creation of reserves and the application of others conventional methods of maintenance in situ are not applicable. The plant proprietors do not use to store or process seeds. Seed storage was reported as a practice by only 1% of the plant proprietors from Para and 11% from Amapa. The most plants collected were from two to three years of age (58% in Amapa and 93% in Para). As conclusions G. barbadense is the species most spread in the two studied states and are found in back yards. In Amapa State the botanical variety barbadense or Quebradinho is predominant, whereas in Para State the predominant variety is brasiliense or Rim-de-boi. Adequate conservation of thestudied species must be carried out in germoplasm collections maintained ex situ
Resumo:
Neuropeptide S (NPS) is an endogenous 20-aminoacid peptide which binds a G protein-coupled receptor named NPSR. This peptidergic system is involved in the modulation of several biological functions, such as locomotion, anxiety, nociception, food intake and motivational behaviors. Studies have shown the participation of NPSR receptors in mediating the hyperlocomotor effects of NPS. A growing body of evidence suggests the participation of adenosinergic, dopaminergic and CRF systems on the hyperlocomotor effects of NPS. Considering that little is known about the role of dopaminergic system in mediating NPS-induced hyperlocomotion, the present study aims to investigate the locomotor actions of intracerebroventricular (icv) NPS in mice pretreated with α-metil-p-tirosine (AMPT, inhibitor of dopamine synthesis), reserpine (inhibitor of dopamine vesicle storage) or sulpiride (D2 receptor antagonist) in the open field test. A distinct group of animals received the same pretreatments described above (AMPT, reserpine or sulpiride) and the hyperlocomotor effects of methylphenidate (dopamine reuptake inhibitor) were investigated in the open field. NPS and methylphenidate increased the mouse locomotor activity. AMPT per se did not change the locomotion of the animals, but it partially reduced the hyperlocomotion of methylphenidate. The pretreatment with AMPT did not affect the psychostimulant effects of NPS. Both reserpine and sulpiride inhibited the stimulatory actions of NPS and methylphenidate. These findings show that the hyperlocomotor effects of methylphenidate, but not NPS, were affected by the pretreatment with AMPT. Furthermore, methylphenidate- and NPS-induced hyperlocomotion was impaired by reserpine and sulpiride pretreatments. Together, data suggests that NPS can increase locomotion even when the synthesis of catecholamines was impaired. Additionally, the hyperlocomotor effects of NPS and methylphenidate depend on monoamines vesicular storaged, mainly dopamine, and on the activation of D2 receptors. The psychostimulant effects of NPS via activation of dopaminergic system display clinical significance on the treatment of diseases which involves dopaminergic pathways, such as Parkinson s disease and drug addiction
Resumo:
Learning strategies can be understood as a planned sequence of procedures or activities, selected in order to facilitate the acquisition, storage and use of information. Although important to the learning process, the knowledge on these strategies is still insufficient, especially with regard to students with visual impairments. Therefore, this study aimed to characterize learning strategies used by blind and sighted students, registered in elementary education in schools and special institutions. Were participants 23 teachers, male and female, aged between 26 and 51 years, and 102 students, of whom 25 were blind and 77 seers, of both genders, registered on the 3rd to the 9th grade of elementary school, aged 7 to 16 years old. The instruments used were: field diary (students and teachers); structured questionnaire (teachers); sociodemographic questionnaire, interview and Assessment Scale of Learning Strategies for Elementary School (students). Initially were made observations in the classroom and the teachers received the questionnaires, with instructions for completion. Then were made the interviews with blind students and the scale was administered with these and with the seers. All instruments were administered individually. We conducted content analysis of the questionnaires with teachers and the interviews with blind students. The scale of strategies and sociodemographic questionnaire were analyzed with the help of descriptive and inferential statistics. It was noticed that the blind students use few learning strategies in the classroom, regardless of city, series, sex or age. It was found that teachers didn t receive training to deal with blind students, either during graduation or after have completed it, in such a way that few of them were able to inform about the learning strategies the students use, and demonstrated low ability to deal with these inefficiencies. It was also found that the blind and the sighted use cognitive and metacognitive strategies during learning, but those used by the blind seem to be more basic, low complexity, given that the seers have achieved higher scores on all subscales. We conclude that the repertoire of learning strategies for blind students is inflexible, requiring increments so that they can achieve significant results. It is important that teachers receive training to understand the learning strategies and how they positively influence learning
Resumo:
The biodiesel is defined as the mono-alkyl ester derived from long-chain fatty acids, from renewable sources such as vegetable oils or animal fat, whose use is associated with the replacement of fossil fuels in diesel engine cycle. The biodiesel is susceptible to oxidation when exposed to air and this process of oxidation affects the quality of fuel, mainly due to long periods of storage. Because of this, the oxidation stability has been the focus of numerous researches since it directly affects the producers, distributors and users of fuel. One of the possibilities to increase the resistance of biodiesel is the autoxidation treatment with inhibitors of oxidation. The antioxidants can be used as potential inhibitors of the effects of oxidation on the kinematic viscosity and the index of acidity of biodiesel, thereby increasing oxidative stability. This work aims to examine the efficiency of antioxidants, α-tocopherol and butylated hydroxy-toluene (BHT), added the biodiesel content of remembrance through Pressurized-Differential Scanning Calorimetry (P-DSC), Thermogravimetry (TG) and Petrology. The results showed that the use of antioxidant BHT, at the concentration of 2000ppm, increased resistance to oxidation of the biodiesel and oxidative induction time (OIT), which is a better result as antioxidant than the α-tocopherol. With the thermogravimetric analysis, it was observed that the biodiesel presented an initial decomposition temperature of lower tendency than that of oil, demonstrating to be more volatile, bearing great similarity to the diesel and being characterized as an alternative fuel. The rheological analysis indicated that each sample of biodiesel behaved as a Newtonian fluid
Resumo:
During the storage of oil, sludge is formed in the bottoms of tanks, due to decantation, since the sludge is composed of a large quantity of oil (heavy petroleum fractions), water and solids. The oil sludge is a complex viscous mixture which is considered as a hazardous waste. It is then necessary to develop methods and technologies that optimize the cleaning process, oil extraction and applications in industry. Therefore, this study aimed to determine the composition of the oil sludge, to obtain and characterize microemulsion systems (MES), and to study their applications in the treatment of sludge. In this context, the Soxhlet extraction of crude oil sludge and aged sludge was carried out, and allowing to quantify the oil (43.9 % and 84.7 % - 13 ºAPI), water (38.7 % and 9.15 %) and solid (17.3 % and 6.15 %) contents, respectively. The residues were characterized using the techniques of X-ray fluorescence (XRF), Xray diffraction (XRD) and transmission Infrared (FT-IR). The XRF technique determined the presence of iron and sulfur in higher proportions, confirming by XRD the presence of the following minerals: Pyrite (FeS2), Pyrrhotite (FeS) and Magnetite (Fe3O4). The FT-IR showed the presence of heavy oil fractions. In parallel, twelve MES were prepared, combining the following constituents: two nonionic surfactants (Unitol L90 and Renex 110 - S), three cosurfactants (butanol, sec-butanol and isoamyl alcohol - C), three aqueous phase (tap water - ADT, acidic solution 6 % HCl, and saline solution - 3.5 % NaCl - AP) and an oil phase (kerosene - OP). From the obtained systems, a common point was chosen belonging to the microemulsion region (25 % [C+S] 5 % OP and AP 70 %), which was characterized at room temperature (25°C) by viscosity (Haake Rheometer Mars), particle diameter (Zeta Plus) and thermal stability. Mixtures with this composition were applied to oil sludge solubilization under agitation at a ratio of 1:4, by varying time and temperature. The efficiencies of solubilization were obtained excluding the solids, which ranged between 73.5 % and 95 %. Thus, two particular systems were selected for use in storage tanks, with efficiencies of oil sludge solubilization over 90 %, which proved the effectiveness of the MES. The factorial design delimited within the domain showed how the MES constituents affect the solubilization of aged oil sludge, as predictive models. The MES A was chosen as the best system, which solubilized a high amount of aged crude oil sludge (~ 151.7 g / L per MES)
Resumo:
Oxygen carriers are metal oxides which have the ability to oxidize and reduce easily by various cycles. Due to this property these materials are widely usedin Chemical-Looping Reforming processes to produce H2 and syngas. In this work supports based on MCM-41 and La-SiO2 were synthesized by hydrothermal method. After the synthesis step they were calcined at 550°C for 2 hours and characterized by TG, XRD, surface area using the BET method and FTIR spectroscopy. The deposition of active phase, in this case Nickel, took place in the proportions of 5, 10 and 20% by weight of metallic nickel, for use as oxygen carriers.The XRD showed that increasing in the content of Ni supported on MCM-41 resulted in a decrease in spatial structure and lattice parameter of the material. The adsorption and desorption curves of the MCM-41 samples exhibited variations with the increase of Ni deposited. Surface area, average pore diameter and wall density of silica showed significant changes , due to the increase of the active phase on the mesoporous material. By other hand, in the samples with La-SiO2 composition was not observed peaks characteristic of hexagonal structure, in the XRD diffractogram. The adsorption/desorption isotherms of nitrogen observed are type IV, characteristic of mesoporous materials. The catalytic test indicates that the supports have no influence in the process, but the nickel concentration is very important, because the results for minor concentration of nickel are not good. The ratio H2/O2 was close to 2, for all 15 cycles involving the test storage capacity of O2, indicating that the materials are effective for oxygen transport
Resumo:
The pulps are products that add economic value enjoy the fruits of the surplus productions of the same. Have good market acceptance because of its practicality and diversity of flavors available year round. In order to assess the quality of the fruit pulp through the physical and chemical parameters and the characteristics of manufacturing industry, we analyzed 36 samples of frozen fruit pulp of three brands marketed in RIO Grande do Norte, 14 brand A, 12 of 10 brand B and brand C, which corresponded to 14 different flavors, of which 10 have identity Standards and Quality (ISQ S) established by the Ministério da Agricultura, Pecuária e Abastecimento (MAPA), totaling 27 samples with ISQ s. We conducted the following physicalchemical analyzes on samples of fruit pulp: Total solids, total soluble solids, pH, titratable acidity, total sugars and the determination of ascorbic acid. The percentage of failure for each parameter evaluated was 37, 04% in total soluble solids, 22,22% for total solids and titratable acidity, 7,40% in relation to pH. The total sugars were within the requirements demanded by the MAPA and ascorbic acid content, determined only in the pulp of acerola and cashew, presented a non compliance in the pulp of brand B. The percentage of failures of the pulps with ISQ S was 59% with brand A, B and C accounted for 3,70%, 33,33% and 22,22% respectively. The pulps which have no established atandards such as pineapple pulp, showed similar values between brands and literature data unlike the pulp of plum, jackfruit and tamarind which diverged greatly in parameters such as total solids and total soluble solids. The study demonstrates the need for greater quality control by the producers with respect to raw materials, processing, packing, stored and the importance of ISQ S to establish the flavors have not yet covered by existing legislation, but already highly commercialized
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Statistics of environmental protection agencies show that the soil has been contaminated with problems often resulting from leaks, spills and accidents during exploration, refining, transportation and storage oil operations and its derivatives. These, gasoline noteworthy, verified by releasing, to get in touch with the groundwater, the compounds BTEX (benzene, toluene, ethylbenzene and xylenes), substances which are central nervous system depressants and causing leukemia. Among the processes used in remediation of soil and groundwater contaminated with organic pollutants, we highlight those that use hydrogen peroxide because they are characterized by the rapid generation of chemical species of high oxidation power, especially the hydroxyl radical ( OH), superoxide (O2 -) and peridroxil (HO2 ), among other reactive species that are capable of transforming or decomposing organic chemicals. The pH has a strong effect on the chemistry of hydrogen peroxide because the formation of different radicals directly depends on the pH of the medium. In this work, the materials MCM-41 and Co-MCM-41 were synthesized and used in the reaction of BTEX removal in aqueous media using H2O2. These materials were synthesized by the hydrothermal method and the techniques used to characterize were: XRD, TG/DTG, adsorption/desorption N2, TEM and X-Ray Fluorescence. The catalytic tests were for 5 h of reaction were carried out in reactors of 20 mL, which was accompanied by the decomposition of hydrogen peroxide by molecular absorption spectrophotometry in the UV-Vis, in addition to removal of organic compounds BTEX was performed as gas chromatography with detection photoionization and flame ionization and by static headspace sampler. The characterizations proved that the materials were successfully synthesized. The catalytic tests showed satisfactory results, and the reactions containing BTEX + Co-MCM-41 + H2O2 at pH = 12.0 had the highest percentages of removal for the compounds studied
Resumo:
Dental pulp stem cells have been widely investigated because of their ability to differentiate into both dental and non-dental cells, with potential use in therapies involving tissue engineering. The technique of cell cryopreservation represents a viable alternative for the conservation of these cells, since it stops reversibly, in a controlled manner, all of cell biological functions in an ultra low temperature. The present study aimed to evaluate, using in vitro experiments, the influence of a cryopreservation protocol on the biologic acti vity of stem cells from human exfoliated deciduous teeth (SHED). Cells obtained from the pulp of three deciduous teeth on end-stage exfoliation or with indicated extraction were expanded in α-MEM culture medium supplemented with antibiotics and 15% fetal bovine serum. At second subculture (P2), a group of cells were submitted to cryopreservation for 30 days in 10% DMSO diluted in fetal bovine serum, at -80º C, while the remind cells continued under normal conditions of cell culture. Cell proliferation was evaluated in both groups (not cryopreserved or cryopreserved) by Trypan blue stain essay at intervals of 24, 48 and 72h after plating. Cell cycle analysis of SHEDs submitted or not to the cryopreservation protocol was performed in the same intervals. Events related to cell death were studied by Annexyn V and PI expression under flow cytometry at the intervals of 24 and 72h. The presence of nuclear morphological changes was evaluated by DAPI staining at 72h interval. It was observed that both groups exhibited an upward cell proliferation curve, without considerable changes in cell viability throughout the experiment. The distribution of cell in the cell cycle phasis was consistent with cell proliferation in both groups. There were no nuclear morphological damages in the end range of the experiment. therefore, it is concluded that the proposed cryopreservation protocol is efficient for storing the studied cell type, allowing its use in future experimental studies
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Accelerated aging test is an important procedure to be used, beyond other aim, for breeding programs to select cultivars with storage and development potential under high relative humidity and temperature. At accelerated aging test in soybean seeds, the temperature and time of exhibition they were not still totally established, factors that cause divergence among the researchers, mainly with relationship to the most appropriate periods. The aim was to evaluate the behavior of soybean seeds submitted to accelerated aging test. Seeds of the varieties IAC-15, CAC-1, FT-Estrela and IAC-Foscarin 31 were submitted to germination test, electrical conductivity and accelerated aging (41 degrees C, during 44, 48, 52, 56, 60, 64, 68, 72 and 76 hours). There are differences among cultivars evaluated in relation to accelerated aging test sensibilility; the cultivars are sensibles to increasing the exposition time; the accelerated aging test can be used to select cultivars in breeding programs; the cultivar FT-Estrela can be sowed at regions with high temperature and humidity.
Resumo:
O objetivo do trabalho foi avaliar comparativamente as características de carcaça e a composição corporal de machos jovens da raça Nelore não-castrados, filhos de touros com diferencial positivo (Linhagem Seleção) ou nulo (Linhagem Controle) para ganho de peso aos 378 dias de idade. Utilizaram-se informações de 92 zebuínos Nelore, com peso de abate médio de 456,00 kg, sendo 51 animais pertencentes à Linhagem Seleção e 41 animais da Linhagem Controle, foram criados em pastagens cultivadas até os 18 meses, quando foram alocados nos dois sistemas de terminação, de forma a compor grupos homogêneos quanto ao peso e filiação. Os animais de confinamento receberam, em baias individuais, ração para possibilitar ganhos de 1,0 kg/cab/dia. Antes do abate, os animais foram submetidos a jejum e pesados, quando se obteve o peso de abate. Após o armazenamento das carcaças em câmara fria, obteve-se a seção da 9ª-10ª-11ª costelas. Não houve efeito significativo de linhagem para nenhuma das características analisadas, exceto para a porcentagem de ossos, sendo que os animais da Linhagem Seleção superaram os animais da Linhagem Controle. O regime de terminação apresentou efeito significativo para a quase totalidade das características estudadas, com exceção para as características de composição corporal. Não houve efeito significativo de interação entre linhagem e terminação. As classes de idade apresentaram efeito significativo para as características peso de abate, peso de carcaça quente, peso da gordura renal-pélvica-ingüinal, porcentagem de músculo, gordura e osso.