Methodology of image analysis for study of the vertisols moisture content

The main problem to study vertical drainage from the moisture distribution, on a vertisol profile, is searching for suitable methods using these procedures. Our aim was to design a digital image processing methodology and its analysis to characterize the moisture content distribution of a vertisol profile. In this research, twelve soil pits were excavated on a ba re Mazic Pellic Vertisols ix of them in May 13/2011 and the rest in May 19 /2011 after a moderate rainfall event. Digital RGB images were taken from each vertisol pit using a Kodak? camera selecting a size of 1600x945 pixels. Each soil image was processed to homogenized brightness and then a spatial filter with several window sizes was applied to select the optimum one. The RGB image obtained were divided in each matrix color selecting the best thresholds for each one, maximum and minimum, to be applied and get a digital binary pattern. This one was analyzed by estimating two fractal scaling exponents box counting dimension D BC) and interface fractal dimension (D) In addition, three pre-fractal scaling coefficients were determinate at maximum resolution: total number of boxes intercepting the foreground pattern (A), fractal lacunarity (?1) and Shannon entropy S1). For all the images processed the spatial filter 9x9 was the optimum based on entropy, cluster and histogram criteria. Thresholds for each color were selected based on bimodal histograms.

Optoelectronic tweezers under arbitrary illumination patterns: theoretical simulations and comparison to experiment

Photovoltaic tweezers are a promising tool to place and move particles on the surface of a photovoltaic material in a controlled way. To exploit this new technique it is necessary to accurately know the electric field created by a specific illumination on the surface of the crystal and above it. This paper describes a numerical algorithm to obtain this electric field generated by several relevant light patterns, and uses them to calculate the electrophoretic potential acting over neutral, polarizable particles in the proximity of the crystal. The results are compared to experiments carried out in LiNbO3 with good overall agreement.

Particle Patterning on Lithium Niobate waveguides via photovoltaic tweezers

Successful micro and nano-particle patterning on iron doped lithium niobate waveguides using photovoltaic fields is reported. This technique previously used in bulk crystals is here applied to waveguide configuration. Well defined particle patterns are obtained using two types of planar waveguides (by proton exchanged and swift heavy ion irradiation) and metallic and dielectric neutral particles. The use of waveguide configuration has allowed a reduction of the light exposure time until 3 s, two orders of magnitude smaller than typical values used in bulk.

1D and 2D neutral particle patterning by dielectrophoretic forces on z-cut Fe:LiNbO3 crystals

1D and 2D patterning of uncharged micro- and nanoparticles via dielectrophoretic forces on photovoltaic z-cut Fe:LiNbO3 have been investigated for the first time. The technique has been successfully applied with dielectric micro-particles of CaCO3 (diameter d = 1-3 μm) and metal nanoparticles of Al (d = 70 nm). At difference with previous experiments in x- and y-cut, the obtained patterns locally reproduce the light distribution with high fidelity. A simple model is provided to analyse the trapping process. The results show the remarkably good capabilities of this geometry for high quality 2D light-induced dielectrophoretic patterning overcoming the important limitations presented by previous configurations.

Comparative theoretical analysis between parallel and perpendicular geometries for 2D particle patterning in photovoltaic ferroelectric substrates

This paper describes the dielectrophoretic potential created by the evanescent electric field acting on a particle near a photovoltaic crystal surface depending on the crystal cut. This electric field is obtained from the steady state solution of the Kukhtarev equations for the photovoltaic effect, where the diffusion term has been disregarded. First, the space charge field generated by a small, square, light spot where d _ l (being d a side of the square and l the crystal thickness) is studied. The surface charge density generated in both geometries is calculated and compared as their relation determines the different properties of the dielectrophoretic potential for both cuts. The shape of the dielectrophoretic potential is obtained and compared for several distances to the sample. Afterwards other light patterns are studied by the superposition of square spots, and the resulting trapping profiles are analysed. Finally the surface charge densities and trapping profiles for different d/l relations are studied.

Architecture to Support Automatic Grading Processes in Programming Teaching

La calificación automática de tareas de programación es un tema importante dentro del campo de la innovación educativa que se enfoca en mejorar las habilidades de programación de los estudiantes y en optimizar el tiempo que el profesorado dedica a ello. Uno de los principales problemas vigentes está relacionado con la diversidad de criterios para calificar las tareas de programación. El presente trabajo propone e implementa una arquitectura, basada en el concepto de orquestación de servicios, para soportar varios procesos de calificación automática de tareas de programación. Esto es obtenido a través de las características de modularidad, extensibilidad y flexibilidad que la arquitectura provee al proceso de calificación. La arquitectura define como pieza clave un elemento llamado Grading-submodule, el mismo que provee un servicio de evaluación del código fuente considerando un criterio de calificación. La implementación se ha llevado a cabo sobre la herramienta Virtual Programming Lab; y los resultados demuestran la factibilidad de realización, y la utilidad tanto para el profesorado como para los estudiantes.

JEFFFREY SACHS versus SALA i MARTÍN : revisión crítica a las propuestas de acción económica para la erradicación de la pobreza

El objetivo del presente trabajo es el de realizar una revisión crítica de dos planteamientos distintos para conseguir erradicar de la pobreza. Los dos planteamientos están desarrollados por dos economistas: Jeffrey Sachs y Sala i Martín. El primero escribe un libro titulado “El fin de la pobreza”, en el cual el capítulo 13 explica “qué inversiones hay que realizar para acabar con la pobreza”. Los planteamientos de Sala i Martín los recoge Guy Sorman en su libro “La economía no miente”, en el cual, hay un capítulo titulado “El fin de la pobreza masiva” con citas constantes a Sala i Martín y en el que Sorman se posiciona claramente a favor de los argumentos de éste. Los dos planteamientos son expuestos durante la clase por el alumno y se espera conocer la opinión que tengan los compañeros/as del curso y el profesor sobre los textos. Sería incluso deseable poder llegar durante la clase a una conclusión de consenso para tratar de dlucidar qué vía es la más apropiada para el objetivo último de erradicación de la pobreza.

Una mirada integral al África Negra. Metodología de análisis, diagnóstico y estrategias para la ordenación del territorio en África Sursahariana

"El objetivo de esta guía es facilitar el enfoque integral del planeamiento para poder planificar y enmarcar las potenciales intervenciones de los distintos actores dentro de las estrategias territoriales definidas para un territorio, considerando todos sus aspectos de manera global y simultánea. Tras la fase de análisis completo y sistemático, que evita que se pasen por alto aspectos clave del territorio, para las fases de diagnóstico y propuesta se ofrece la rueda como un instrumento gráfico que permite representar y visualizar simultáneamente los problemas, y posteriormente los objetivos y estrategias aplicables a un territorio. En consecuencia, la guía de trabajo está diseñada específicamente para afrontar una serie de cuestiones clave de carácter urgente: La explotación de recursos naturales y su relación con los medios de vida; La vulnerabilidad ante los riesgos naturales y antrópicos; la insostenibilidad territorial y la falta de gestión de la ocupación del suelo (dispersión urbana, informalidad…); El Cambio climático; La Habitabilidad Precaria"

Approaching unbanked people: a person-to-person payment application on Facebook

More than 2.5 billion people are still unbanked and they do not access or use financial services. In this paper, we present an innovative service that allows Santander University Smart Card holders to make person-to-person payments to their friends, using different social channels, such as Telegram, Facebook or Twitter. Our first implementation is based on Facebook, one of the most used social networks. This approach allows the service to reach a great number of potential users but the delivery and stability of the service depends on an external provider. We include the description of the service architecture, its implementation, tests, and the lessons learned from the development. We also discuss pros and cons of the third party service dependency from the technical and business viewpoints.

Extracting knowledge through friendsourcing: application to new financial services

Personalization has become a key factor for the success of new ICT services. However, the personal information required is not always available in a single site, but scattered in heterogeneous sources, and extracting knowledge from raw information is not an easy job. As a result, many organizations struggle to obtain knowledge on their users useful enough for their business purposes. This paper introduces a comprehensive personal data framework that opens the knowledge extraction process up to collaboration by the involvement of new actors, while enabling users to monitor and control it. The contributions have been validated in a financial services scenario where socioeconomic knowledge on some users is generated by tapping into their social network and used to assists them in raising money from their friends.

Electro y dielectroforesis de nanopartículas por efecto fotovoltaico

El objetivo de esta tesis doctoral es la investigación del nuevo concepto de pinzas fotovoltaicas, es decir, del atrapamiento, ordenación y manipulación de partículas en las estructuras generadas en la superficie de materiales ferroeléctricos mediante campos fotovoltaicos o sus gradientes. Las pinzas fotovoltaicas son una herramienta prometedora para atrapar y mover las partículas en la superficie de un material fotovoltaico de una manera controlada. Para aprovechar esta nueva técnica es necesario conocer con precisión el campo eléctrico creado por una iluminación específica en la superficie del cristal y por encima de ella. Este objetivo se ha dividido en una serie de etapas que se describen a continuación. La primera etapa consistió en la modelización del campo fotovoltaico generado por iluminación no homogénea en substratos y guías de onda de acuerdo al modelo de un centro. En la segunda etapa se estudiaron los campos y fuerzas electroforéticas y dielectroforéticas que aparecen sobre la superficie de substratos iluminados inhomogéneamente. En la tercera etapa se estudiaron sus efectos sobre micropartículas y nanopartículas, en particular se estudió el atrapamiento superficial determinando las condiciones que permiten el aprovechamiento como pinzas fotovoltaicas. En la cuarta y última etapa se estudiaron las configuraciones más eficientes en cuanto a resolución espacial. Se trabajó con distintos patrones de iluminación inhomogénea, proponiéndose patrones de iluminación al equipo experimental. Para alcanzar estos objetivos se han desarrollado herramientas de cálculo con las cuales obtenemos temporalmente todas las magnitudes que intervienen en el problema. Con estas herramientas podemos abstraernos de los complicados mecanismos de atrapamiento y a partir de un patrón de luz obtener el atrapamiento. Todo el trabajo realizado se ha llevado a cabo en dos configuraciones del cristal, en corte X ( superficie de atrapamiento paralela al eje óptico) y corte Z ( superficie de atrapamiento perpendicular al eje óptico). Se ha profundizado en la interpretación de las diferencias en los resultados según la configuración del cristal. Todas las simulaciones y experimentos se han realizado utilizando como soporte un mismo material, el niobato de litio, LiNbO3, con el f n de facilitar la comparación de los resultados. Este hecho no ha supuesto una limitación en los resultados pues los modelos no se limitan a este material. Con respecto a la estructura del trabajo, este se divide en tres partes diferenciadas que son: la introducción (I), la modelización del atrapamiento electroforético y dielectroforético (II) y las simulaciones numéricas y comparación con experimentos (III). En la primera parte se fijan las bases sobre las que se sustentarán el resto de las partes. Se describen los efectos electromagnéticos y ópticos a los que se hará referencia en el resto de los capítulos, ya sea por ser necesarios para describir los experimentos o, en otros casos, para dejar constancia de la no aparición de estos efectos para el caso en que nos ocupa y justificar la simplificación que en muchos casos se hace del problema. En esta parte, se describe principalmente el atrapamiento electroforético y dielectroforético, el efecto fotovoltaico y las propiedades del niobato de litio por ser el material que utilizaremos en experimentos y simulaciones. Así mismo, como no debe faltar en ninguna investigación, se ha analizado el state of the art, revisando lo que otros científicos del campo en el que estamos trabajando han realizado y escrito con el fin de que nos sirva de cimiento a la investigación. Con el capítulo 3 finalizamos esta primera parte describiendo las técnicas experimentales que hoy en día se están utilizando en los laboratorios para realizar el atrapamiento de partículas mediante el efecto fotovoltaico, ya que obtendremos ligeras diferencias en los resultados según la técnica de atrapamiento que se utilice. En la parte I I , dedicada a la modelización del atrapamiento, empezaremos con el capítulo 4 donde modelizaremos el campo eléctrico interno de la muestra, para a continuación modelizar el campo eléctrico, los potenciales y las fuerzas externas a la muestra. En capítulo 5 presentaremos un modelo sencillo para comprender el problema que nos aborda, al que llamamos Modelo Estacionario de Separación de Carga. Este modelo da muy buenos resultados a pesar de su sencillez. Pasamos al capítulo 6 donde discretizaremos las ecuaciones que intervienen en la física interna de la muestra mediante el método de las diferencias finitas, desarrollando el Modelo de Distribución de Carga Espacial. Para terminar esta parte, en el capítulo 8 abordamos la programación de las modelizaciones presentadas en los anteriores capítulos con el fn de dotarnos de herramientas para realizar las simulaciones de una manera rápida. En la última parte, III, presentaremos los resultados de las simulaciones numéricas realizadas con las herramientas desarrolladas y comparemos sus resultados con los experimentales. Fácilmente podremos comparar los resultados en las dos configuraciones del cristal, en corte X y corte Z. Finalizaremos con un último capítulo dedicado a las conclusiones, donde resumiremos los resultados que se han ido obteniendo en cada apartado desarrollado y daremos una visión conjunta de la investigación realizada. ABSTRACT The aim of this thesis is the research of the new concept of photovoltaic or optoelectronic tweezers, i.e., trapping, management and manipulation of particles in structures generated by photovoltaic felds or gradients on the surface of ferroelectric materials. Photovoltaic tweezers are a promising tool to trap and move the particles on the surface of a photovoltaic material in a monitored way. To take advantage of this new technique is necessary to know accurately the electric field created by a specifc illumination in the crystal surface and above it. For this purpose, the work was divided into the stages described below. The first stage consisted of modeling the photovoltaic field generated by inhomogeneous illumination in substrates and waveguides according to the one-center model. In the second stage, electrophoretic and dielectrophoretic fields and forces appearing on the surface of substrates and waveguides illuminated inhomogeneously were studied. In the third stage, the study of its effects on microparticles and nanoparticles took place. In particular, the trapping surface was studied identifying the conditions that allow its use as photovoltaic tweezers. In the fourth and fnal stage the most efficient configurations in terms of spatial resolution were studied. Different patterns of inhomogeneous illumination were tested, proposing lightning patterns to the laboratory team. To achieve these objectives calculation tools were developed to get all magnitudes temporarily involved in the problem . With these tools, the complex mechanisms of trapping can be simplified, obtaining the trapping pattern from a light pattern. All research was carried out in two configurations of crystal; in X section (trapping surface parallel to the optical axis) and Z section (trapping surface perpendicular to the optical axis). The differences in the results depending on the configuration of the crystal were deeply studied. All simulations and experiments were made using the same material as support, lithium niobate, LiNbO3, to facilitate the comparison of results. This fact does not mean a limitation in the results since the models are not limited to this material. Regarding the structure of this work, it is divided into three clearly differentiated sections, namely: Introduction (I), Electrophoretic and Dielectrophoretic Capture Modeling (II) and Numerical Simulations and Comparison Experiments (III). The frst section sets the foundations on which the rest of the sections will be based on. Electromagnetic and optical effects that will be referred in the remaining chapters are described, either as being necessary to explain experiments or, in other cases, to note the non-appearance of these effects for the present case and justify the simplification of the problem that is made in many cases. This section mainly describes the electrophoretic and dielectrophoretic trapping, the photovoltaic effect and the properties of lithium niobate as the material to use in experiments and simulations. Likewise, as required in this kind of researches, the state of the art have been analyzed, reviewing what other scientists working in this field have made and written so that serve as a foundation for research. With chapter 3 the first section finalizes describing the experimental techniques that are currently being used in laboratories for trapping particles by the photovoltaic effect, because according to the trapping technique in use we will get slightly different results. The section I I , which is dedicated to the trapping modeling, begins with Chapter 4 where the internal electric field of the sample is modeled, to continue modeling the electric field, potential and forces that are external to the sample. Chapter 5 presents a simple model to understand the problem addressed by us, which is called Steady-State Charge Separation Model. This model gives very good results despite its simplicity. In chapter 6 the equations involved in the internal physics of the sample are discretized by the finite difference method, which is developed in the Spatial Charge Distribution Model. To end this section, chapter 8 is dedicated to program the models presented in the previous chapters in order to provide us with tools to perform simulations in a fast way. In the last section, III, the results of numerical simulations with the developed tools are presented and compared with the experimental results. We can easily compare outcomes in the two configurations of the crystal, in section X and section Z. The final chapter collects the conclusions, summarizing the results that were obtained in previous sections and giving an overview of the research.

A proposal for enhancing the motivation in students of computer programming

Computer programming is known to be one of the most difficult courses for students in the first year of engineering. They are faced with the challenge of abstract thinking and gaining programming skills for the first time. These skills are acquired by continuous practicing from the start of the course. In order to enhance the motivation and dynamism of the learning and assessment processes, we have proposed the use of three educational resources namely screencasts, self-assessment questionnaires and automated grading of assignments. These resources have been made available in Moodle which is a Learning Management System widely used in education environments and adopted by the Telecommunications Engineering School at the Universidad Politécnica de Madrid (UPM). Both teachers and students can enhance the learning and assessment processes through the use of new educational activities such as self-assessment questionnaires and automated grading of assignments. On the other hand, multimedia resources such as screencasts can guide students in complex topics. The resources proposed allow teachers to improve their tutorial actions since they provide immediate feedback and comments to students without the enormous effort of manual correction and evaluation by teachers specially taking into account the large number of students enrolled in the course. In this paper we present the case study where three proposed educational resources were applied. We describe the special features of the course and explain why the use of these resources can both enhance the students? motivation and improve the teaching and learning processes. Our research work was carried out on students attending the "Computer programming" course offered in the first year of a Telecommunications Engineering degree at UPM. This course is mandatory and has more than 450 enrolled students. Our purpose is to encourage the motivation and dynamism of the learning and assessment processes.

A personal data framework for exchanging knowledge about users in new financial services

Personal data is a key asset for many companies, since this is the essence in providing personalized services. Not all companies, and specifically new entrants to the markets, have the opportunity to access the data they need to run their business. In this paper, we describe a comprehensive personal data framework that allows service providers to share and exchange personal data and knowledge about users, while facilitating users to decide who can access which data and why. We analyze the challenges related to personal data collection, integration, retrieval, and identity and privacy management, and present the framework architecture that addresses them. We also include the validation of the framework in a banking scenario, where social and financial data is collected and properly combined to generate new socio-economic knowledge about users that is then used by a personal lending service.

Convento para religiosas clarisas, en Zamora

Convento para religiosas clarisas, en Zamora

Capilla de las Escuelas profesionales Salesianas de San José, en Zamora

Capilla de las Escuelas profesionales Salesianas de San José, en Zamora