Contribución a la Podología al estudio de la intervención del Hallux Valgus

Técnica de Mc. Bride modificada por el Dr. José Ma. Soler Minoves. - Paciente en QUIROFANO. - Anestesia de la extremidad...

Caractéristiques des femmes victimes de violences graves dans un échantillon clinique

Bien que la violence contre les femmes en général soit actuellement reconnue comme un problème de santé publique, la sévérité des violences subies par les femmes est une problématique encore peu étudiée. Cette recherche vise à identifier le profil des femmes victimes des violences les plus graves parmi les patientes ayant consulté auprès d'une Unité de Médecine des Violences d'un hôpital Universitaire Suisse. Les données ont été récoltées à partir des dossiers complétés par l'infirmière pour chaque patiente ayant consulté à l'Unité durant l'année 2006. Une quinzaine de caractéristiques relatives à la victime elle-même ainsi qu'à l'évènement violent ont été systématiquement documentées par le consultant. Les résultats montrent que parmi les 183 cas de femmes analysés, 28% ont subi des violences graves et 72% des violences modérées. Si aucune différence significative entre les deux groupes de femmes n'a été relevée concernant l'âge, la nationalité, les expériences de violence dans l'enfance et la religion, les femmes victimes de leur partenaire (actuel ou ex) étaient plus à risque de subir des violences graves que celles victimes d'un autre agresseur. Les programmes de prévention devraient se centrer sur la gravité potentielle des actes de violence dans la sphère conjugale.

Differences in pandemic influenza vaccination policies for pregnant women in Europe.

BACKGROUND: An important component of the policy to deal with the H1N1 pandemic in 2009 was to develop and implement vaccination. Since pregnant women were found to be at particular risk of severe morbidity and mortality, the World Health Organization and the European Centers for Disease Control advised vaccinating pregnant women, regardless of trimester of pregnancy. This study reports a survey of vaccination policies for pregnant women in European countries. METHODS: Questionnaires were sent to European competent authorities of 27 countries via the European Medicines Agency and to leaders of registries of European Surveillance of Congenital Anomalies in 21 countries. RESULTS: Replies were received for 24 out of 32 European countries of which 20 had an official pandemic vaccination policy. These 20 countries all had a policy targeting pregnant women. For two of the four countries without official pandemic vaccination policies, some vaccination of pregnant women took place. In 12 out of 20 countries the policy was to vaccinate only second and third trimester pregnant women and in 8 out of 20 countries the policy was to vaccinate pregnant women regardless of trimester of pregnancy. Seven different vaccines were used for pregnant women, of which four contained adjuvants. Few countries had mechanisms to monitor the number of vaccinations given specifically to pregnant women over time. Vaccination uptake varied. CONCLUSIONS: Differences in pandemic vaccination policy and practice might relate to variation in perception of vaccine efficacy and safety, operational issues related to vaccine manufacturing and procurement, and vaccination campaign systems. Increased monitoring of pandemic influenza vaccine coverage of pregnant women is recommended to enable evaluation of the vaccine safety in pregnancy and pandemic vaccination campaign effectiveness.

A evolução da indústria petroquímica brasileira

The Brazilian Petrochemical Industry is about to turn fifty years old, and endures profound changes. In less than four years, it has moved from a system of centralized decisions and a national lever of planning, to another which is spread, without massive actions and with less integration with the raw material supplying company. On this issue it is presented, briefly, a small history of the development of this industrial type, including issues on how the growth of this activity, so important to the development of Brazil, shall be lead.

Muutosilmiöt soodakattilakeossa

Soodakattilan sulakeon epästationaarinen käyttäytyminen sekä keon pitkä jäähtymisaika alasajon jälkeen ovat aiheuttaneet ongelmia kattilan taloudellisessa käytettävyydessä. Keon käyttäytymisestä on luotu CFD-malleja, joiden tavoitteena on havainnollistaa keon lämpötilajakaumaa ja rakennetta. Mallien ongelmana on se, että niissä huomioidaan vain keon aktiivinen pintakerros. Keon sisäosan rakennetta ja siinä tapahtuvia prosesseja ei toistaiseksi tunneta kunnolla luotettavan, koko keon kattavan mallin luomiseen. Tässä työssä tutkittiin sulakeon käytön aikana havaittuja muutosilmiöitä, jotka vaikuttavat keon rakenteeseen ja ominaisuuksiin sekä tutkittiin ilmiöiden taustalla olevia tekijöitä. Näitä tekijöitä ovat keon sisässä tapahtuvat kemialliset ja fyysiset prosessit, jotka aiheuttavat muutoksia niin lämpöteknisesti kuin fyysisesti sekä ulkoapäin tulevat tekijät, jotka aiheutuvat ajotilanteiden seurauksena tapahtuvista muutoksista. Työn kokeellisena osana luotiin sulakeon jäähtymismalli käyttäen 1-dimensionaalista ADL-mallia. Mallin pohjana käytettiin StoraEnso Oy:ltä Oulun soodakattilan sulakeosta saatua mittausraporttia. ADL-mallin avulla luotiin keon jäähtymiskäyrät lämpötilan ja syvyyden funktiona. Saadut käyrät täsmäsivät hyvin mittausraportin tuloksiin. Mallin avulla keolle saatiin muodostettua energiatase, jonka tuloksena keosta 12 tunnin aikana poistuva lämpövirta pinnalla oli noin 9.8kW/m2 ja pinnan lämmönsiirtokerroin 58.3W/m²°C. Pohjan poistuvaksi lämpövirraksi saatiin 14.1kW/m2 ja lämmönsiirtokertoimeksi 75.4W/m²°C. Termiseksi diffuusiokertoimeksi saatiin 3.9•10-7m²/s.

An octree isosurface codification based on discrete planes

Describes a method to code a decimated model of an isosurface on an octree representation while maintaining volume data if it is needed. The proposed technique is based on grouping the marching cubes (MC) patterns into five configurations according the topology and the number of planes of the surface that are contained in a cell. Moreover, the discrete number of planes on which the surface lays is fixed. Starting from a complete volume octree, with the isosurface codified at terminal nodes according to the new configuration, a bottom-up strategy is taken for merging cells. Such a strategy allows one to implicitly represent co-planar faces in the upper octree levels without introducing any error. At the end of this merging process, when it is required, a reconstruction strategy is applied to generate the surface contained in the octree intersected leaves. Some examples with medical data demonstrate that a reduction of up to 50% in the number of polygons can be achieved

Water circulations for effective bleaching of high-brightness mechanical pulps

The amount of water available is usually restricted, which leads to a situation where a complete understanding of the process, including water circulations and the influence of water components, is essential. The main aim of this thesis was to clarify the possibilities for the efficient use of residual peroxide by means of water circulation rearrangements. Rearranging water circulations and the reduction of water usage may cause new problems, such as metal induced peroxide decomposition that needs to be addressed. This thesis introduces theoretical methods of water circulations to combine two variables; effective utilization of residual peroxide and avoiding manganese in the alkaline peroxide bleaching stage. Results are mainly based on laboratory and mill site experiments concerning the utilization of residual peroxide. A simulation model (BALAS) was used to evaluate the manganese contents and residual peroxide doses. It was shown that with optimum recirculation of residual peroxide the brightness can be improved or chemical costs can be decreased. From the scientific perspective, it was also very important to discover that recycled peroxide was more effective pre-bleaching agent compared to fresh peroxide. This can be due to the organic acids i.e. per acetic acid in wash press filtrate that have been formed in alkaline bleaching stage. Even short retention time was adequate and the activation of residual peroxide using sodium hydroxide was not necessary. There are several possibilities for using residual peroxide in practice regarding bleaching. A typical modern mechanical pulping process line consist of defibering, screening, a disc filter, a bleach press, high consistency (HC) peroxide bleaching and a wash press. Furthermore there usually is not a particular medium consistency (MC) pre-bleaching stage that includes additional thickening equipment. The most advisable way to utilize residual peroxide in this kind of process is to recycle the wash press filtrate to the dilution of disc filter pulp (low MC pre-bleaching stage). An arrangement such as this would be beneficial in terms of the reduced convection of manganese to the alkaline bleaching stage. Manganese originates from wood material and will be removed to the water phase already in the early stages of the process. Recycling residual peroxide prior to the disc filter is not recommended because of low consistencies. Regarding water circulations, the novel point of view is that, it would be beneficial to divide water circulations into two sections and the critical location for the division is the disc filter. Both of these two sections have their own priority. Section one before the disc filter: manganese removal. Section two after the disc filter: brightening of pulp. This division can be carried out if the disc filter pulp is diluted only by wash press filtrate before the MC storage tower. The situation is even better if there is an additional press after the disc filter, which will improve the consistency of the pulp. This has a significant effect on the peroxide concentration in the MC pre-bleaching stage. In terms of manganese content, it is essential to avoid the use of disc filter filtrate in the bleach press and wash press showers. An additional cut-off press would also be beneficial for manganese removal. As a combination of higher initial brightness and lower manganese content, the typical brightness increase varies between approximately 0.5 and 1% ISO units after the alkaline peroxide bleaching stage. This improvement does not seem to be remarkable, but as it is generally known, the final brightness unit is the most expensive and difficult to achieve. The estimation of cost savings is not unambiguous. For example in GW/TMP mill case 0.6% ISO units higher final brightness gave 10% savings in the costs of bleaching chemicals. With an hypothetical 200 000 ton annual production, this means that the mill could save in the costs of bleaching chemicals more than 400 000 euros per year. In general, it can be said that there were no differences between the behavior of different types of processes (GW, PGW, TMP and BCTMP). The enhancement of recycling gave a similar response in all cases. However, we have to remember that the utilization of residual peroxide in older mills depends a great deal on the process equipment, the amount of water available and existing pipeline connections. In summary, it can be said that processes are individual and the same solutions cannot be applied to all cases.

O comportamento do elétron: uma análise do efeito compton e da relação de Broglie

The De Broglie's relation was a fundamental step in the development of a wave nature for matter. Therefore, we have examined it from the perspective of the new atomic theory. This relation makes successful predictions of the stable energy levels for electrons orbiting a nucleus. The formulation of the de Broglie's relation is a fundamental application of the theory of wave-particle duality for a material particle. In this work, the direct demonstration employing the equations E = mc² and E = hcλ, was avoided. We provide a complete analysis of this relation considering features of the special theory of relativity.

Correlação entre parâmetros da cinética de intumescimento com características estruturais e hidrofílicas de hidrogéis de poliacrilamida e metilcelulose

In this paper, the effects of acrylamide (AAm), methylcellulose (MC) contents, pH and ionic strength on kinetic, network and hydrophilic properties of polyacrylamide and methylcellulose hydrogels were investigated. The hydrogels were characterized by evaluating of network [average molecular weight between crosslinks (M C), crosslink density (q) and the number of elastically effective chains (Ve)], and kinetic parameters [diffusional exponent (n), diffusion constant (k) and diffusion coefficient (D)]. Such properties were controlled by adjusting of the AAm, MC contents, pH and ionic strength factors. Due to high hydrophilicity and fast water-uptake, the PAAm-MC hydrogels can be considered as materials for potential applications in agricultural fields, mainly in controlled release of water or pesticides.

Preliminary study of insect attraction by a mixture of semiochemicals containing 1,2,4-Trimethoxybenzene in domestic citric-culture

In this work we describe a new efficient strategy for the preparation of 1,2,4-trimethoxybenzene (3) in 56% overall yield. The compound 3 was used in a preliminary study of insect attraction by a mixture of semiochemicals called TIV, composed of indol (1), vanillin (2) and 1,2,4-trimethoxybenzene (3), in eight Mc Phail style traps installed at a domestic orchard of citric-culture, containing 120 trees not infected by plagues in Bom Jesus Farm, located next to a patch of the Atlantic Forest, at Silva Jardim, Rio de Janeiro, Brazil.

Fe (ii) adsorption on Ucides Cordatus crab shells

In this study Ucides cordatus crab shells were utilized as Fe (II) sorbent as material of low cost and simple preparation. Values of pH of standard solution, biosorbent mass, particles size, contact time (t c) and initial concentration of the standard solution were optimized. The best conditions were pH = 2.00, t c = 840 min and Mc = 0.25 g. The kinetic pseudo first-order model displayed the best description of the adsorption process and the equilibrium study showed that the Langmuir model better describes the adsorption of the Fe (II). There is great affinity between the Fe (II) and the biosorbent.