FEM based Virtual Prototyping and Design of Third Harmonic Excitation System for Low Voltage Brushless Alternators

Salient pole brushless alternators coupled to IC engines are extensively used as stand-by power supply units for meeting in- dustrial power demands. Design of such generators demands high power to weight ratio, high e ciency and low cost per KVA out- put. Moreover, the performance characteristics of such machines like voltage regulation and short circuit ratio (SCR) are critical when these machines are put into parallel operation and alterna- tors for critical applications like defence and aerospace demand very low harmonic content in the output voltage. While designing such alternators, accurate prediction of machine characteristics, including total harmonic distortion (THD) is essential to mini- mize development cost and time. Total harmonic distortion in the output voltage of alternators should be as low as possible especially when powering very sophis- ticated and critical applications. The output voltage waveform of a practical AC generator is replica of the space distribution of the ux density in the air gap and several factors such as shape of the rotor pole face, core saturation, slotting and style of coil disposition make the realization of a sinusoidal air gap ux wave impossible. These ux harmonics introduce undesirable e ects on the alternator performance like high neutral current due to triplen harmonics, voltage distortion, noise, vibration, excessive heating and also extra losses resulting in poor e ciency, which in turn necessitate de-rating of the machine especially when connected to non-linear loads. As an important control unit of brushless alternator, the excitation system and its dynamic performance has a direct impact on alternator's stability and reliability. The thesis explores design and implementation of an excitation i system utilizing third harmonic ux in the air gap of brushless al- ternators, using an additional auxiliary winding, wound for 1=3rd pole pitch, embedded into the stator slots and electrically iso- lated from the main winding. In the third harmonic excitation system, the combined e ect of two auxiliary windings, one with 2=3rd pitch and another third harmonic winding with 1=3rd pitch, are used to ensure good voltage regulation without an electronic automatic voltage regulator (AVR) and also reduces the total harmonic content in the output voltage, cost e ectively. The design of the third harmonic winding by analytic methods demands accurate calculation of third harmonic ux density in the air gap of the machine. However, precise estimation of the amplitude of third harmonic ux in the air gap of a machine by conventional design procedures is di cult due to complex geome- try of the machine and non-linear characteristics of the magnetic materials. As such, prediction of the eld parameters by conven- tional design methods is unreliable and hence virtual prototyping of the machine is done to enable accurate design of the third har- monic excitation system. In the design and development cycle of electrical machines, it is recognized that the use of analytical and experimental methods followed by expensive and in exible prototyping is time consum- ing and no longer cost e ective. Due to advancements in com- putational capabilities over recent years, nite element method (FEM) based virtual prototyping has become an attractive al- ternative to well established semi-analytical and empirical design methods as well as to the still popular trial and error approach followed by the costly and time consuming prototyping. Hence, by virtually prototyping the alternator using FEM, the important performance characteristics of the machine are predicted. Design of third harmonic excitation system is done with the help of results obtained from virtual prototype of the machine. Third harmonic excitation (THE) system is implemented in a 45 KVA ii experimental machine and experiments are conducted to validate the simulation results. Simulation and experimental results show that by utilizing third harmonic ux in the air gap of the ma- chine for excitation purposes during loaded conditions, triplen harmonic content in the output phase voltage is signi cantly re- duced. The prototype machine with third harmonic excitation system designed and developed based on FEM analysis proved to be economical due to its simplicity and has the added advan- tage of reduced harmonics in the output phase voltage.

Low-Cost Micromechanically Tunable Optical Devices: Strained Resonator Engineering, Technological Implementation and Characterization

The rapid growth of the optical communication branches and the enormous demand for more bandwidth require novel networks such as dense wavelength division multiplexing (DWDM). These networks enable higher bitrate transmission using the existing optical fibers. Micromechanically tunable optical microcavity devices like VCSELs, Fabry-Pérot filters and photodetectors are core components of these novel DWDM systems. Several air-gap based tunable devices were successfully implemented in the last years. Even though these concepts are very promising, two main disadvantages are still remaining. On the one hand, the high fabrication and integration cost and on the other hand the undesired adverse buckling of the suspended membranes. This thesis addresses these two problems and consists of two main parts: • PECVD dielectric material investigation and stress control resulting in membranes shape engineering. • Implementation and characterization of novel tunable optical devices with tailored shapes of the suspended membranes. For this purposes, low-cost PECVD technology is investigated and developed in detail. The macro- and microstress of silicon nitride and silicon dioxide are controlled over a wide range. Furthermore, the effect of stress on the optical and mechanical properties of the suspended membranes and on the microcavities is evaluated. Various membrane shapes (concave, convex and planar) with several radii of curvature are fabricated. Using this resonator shape engineering, microcavity devices such as non tunable and tunable Fabry-Pérot filters, VCSELs and PIN photodetectors are succesfully implemented. The fabricated Fabry-Pérot filters cover a spectral range of over 200nm and show resonance linewidths down to 1.5nm. By varying the stress distribution across the vertical direction within a DBR, the shape and the radius of curvature of the top membrane are explicitely tailored. By adjusting the incoming light beam waist to the curvature, the fundamental resonant mode is supported and the higher order ones are suppressed. For instance, a tunable VCSEL with 26 nm tuning range, 400µW maximal output power, 47nm free spectral range and over 57dB side mode suppresion ratio (SMSR) is demonstrated. Other technologies, such as introducing light emitting organic materials in microcavities are also investigated.

Noise Reduction Using Low Weight and Constant Weight Coding Techniques

Signalling off-chip requires significant current. As a result, a chip's power-supply current changes drastically during certain output-bus transitions. These current fluctuations cause a voltage drop between the chip and circuit board due to the parasitic inductance of the power-supply package leads. Digital designers often go to great lengths to reduce this "transmitted" noise. Cray, for instance, carefully balances output signals using a technique called differential signalling to guarantee a chip has constant output current. Transmitted-noise reduction costs Cray a factor of two in output pins and wires. Coding achieves similar results at smaller costs.

A Reinforcement-Learning Approach to Power Management

We describe an adaptive, mid-level approach to the wireless device power management problem. Our approach is based on reinforcement learning, a machine learning framework for autonomous agents. We describe how our framework can be applied to the power management problem in both infrastructure and ad~hoc wireless networks. From this thesis we conclude that mid-level power management policies can outperform low-level policies and are more convenient to implement than high-level policies. We also conclude that power management policies need to adapt to the user and network, and that a mid-level power management framework based on reinforcement learning fulfills these requirements.

Actuación de UNAMID (operación híbrida de la Unión Africana y las Naciones Unidas en Darfur) en la defensa de los Derechos Humanos de las mujeres en el conflicto en Darfur (2008 – 2012)

El interés de esta monografía es analizar los alcances y las limitaciones de la actuación de UNAMID en la defensa de los Derechos Humanos de las mujeres en el conflicto en Darfur (2008-2012). Lo anterior, para dar cuenta de que si bien UNAMID ha tenido avances significativos en el aumento de denuncias por violación sexual, en la educación y en la inclusión de la mujer en Darfur, la intervención tardía, la falta de personal cualificado y el lento despliegue ha limitado su actuación para erradicar la violencia sexual como arma de guerra. Sin embargo, la baja internalización de la norma por parte del Estado de Sudán ha sido el mayor limitante para la Misión de Paz. Este análisis se realiza mediante el concepto de Responsabilidad de proteger y el enfoque de Alexander Wendt y Nicholas Onuf.

Características fenotípicas de personalidad y neuropsicológicas en padres no afectados de pacientes esquizofrénicos

Introducció. Actualment, està àmpliament acceptat que l'esquizofrènia posseeix una etiologia multifactorial i que existeix una complexa interacció entre factors genètics i factors ambientals. Amb l'objectiu de coneixerà quins són els mecanismes etiològics i patofisiològics que determinen el trastorn una part de la investigaci6 s 'ha centrat, en els últims anys, en la detecció de marcadors de vulnerabilitat en subjectes amb risc al trastorn. Aquesta vulnerabilitat, denominada 'esquizotipia', es pot identificar en subjectes clínicament no afectats. Objectiu. L'objectiu d'aquesta investigació s'ha dirigit a intentar contestar a alguns interrogants que encara no tenen resposta. Per exemple, per què alguns familiars, essent portadors del genotip esquizofrènic, no han presentat mai la malaltia?, existeixen formes esquizotípiques de menor risc per a la presentació del trastorn?, poden alguns patrons esquizotípics 'ajudar' a que la vulnerabilitat es mantingui latent i no es manifesti en forma de trastorn? En termes generals, l'estudi s'ha centrat en la identificació de marcadors de vulnerabilitat dels trastorns de l'espectre esquizofrènic en pares no afectats de pacients amb esquizofrènia (subjectes d'edats avançades amb poca probabilitat de presentar el trastorn) comparats amb pares normals de subjectes normals. Metodologia. S' han avaluat 26 parelles de pares no afectats de pacients amb esquizofrènia i 26 parelles de pares normals de subjectes normals (n= 104) en variables de personalitat i comportamentals (esquizotipia psicomètrica -O-LIFE-, trastorns de personalitat -Qüestionari d'avaluació IPDE-, psicopatologia general -SCL-90- i lloc de control -MHLC-) i variables neuropsicològiques (dèficit atencional -CPT-IP-, funció executiva -TMT part B- i memòria i aprenentatge verbal -CVLT-). Resultats. Els pares dels pacients esquizofrènics, comparats amb els controls, mostren significativament puntuacions mes altes al factor d'anhedònia introvertida, al trastorn paranoide de la personalitat i al trastorn per evitació de la personalitat, més característiques de psicopatologia general i un major lloc de control intern relacionat amb la salut. També realitzen mes errors d'omissió en la tasca atencional, presenten una major interferència proactiva al test de memòria i aprenentatge verbal i mostren una tendència a dedicar mes temps a completar la tasca executiva. Els resultats mostren que les associacions entre les variables de personalitat i les neuropsicològiques són de poca magnitud i les diferències entre ambdós grups no segueixen un patró clarament determinat. Conclusions. Els pares dels pacients esquizofrènics presenten més trets esquizotípics negatius que els pares del subjectes normals. L'anhedònia introvertida podria considerar-se com una forma de menor risc a l'esquizofrènia ja que s'evidencia en subjectes (pares) d'edats avançades que ja han superat l'edat de risc i amb poca probabilitat de presentar mai el trastorn. Tanmateix, es confirma que el trastorn paranoide de la personalitat forma part dels trastorns de l'espectre esquizofrènic. Els pares dels pacients atribueixen un major pes i la internalització i al poder dels altres en relació a l'estat de salut, i en general, presenten més característiques psicopatològiques que el grup control. Quant a les variables neuropsicològiques, els pares dels pacients realitzen pitjor la tasca atencional, són més lents en l'anticipació, planificació i flexibilitat de les respostes en el test executiu. Els indicadors de memòria i aprenentatge verbal no discriminen a ambdós grups, i únicament els pares dels pacients presenten una major interferència proactiva. Finalment, el patró de personalitat i el neuropsicològic corresponen a dos fenotips diferents relacionats amb l'esquizofrènia que no es troben íntimament units en subjectes amb aquestes característiques.

Trends in aerosol optical depth in the Russian Arctic and their links with synoptic climatology

Temporal and spatial variability of aerosol optical depth (AOD) are examined using observations of direct solar radiation in the Eurasian Arctic for 1940-1990. AOD is estimated using empirical methods for 14 stations located between 66.2 degrees N and 80.6 degrees N, from the Kara Sea to the Chukchi Sea. While AOD exhibits a well-known springtime maximum and summertime minimum at all stations, atmospheric turbidity is higher in spring in the western (Kara-Laptev) part of the Eurasian Arctic. Between June and August, the eastern (East Siberian-Chukchi) sector experiences higher transparency than the western part. A statistically significant positive trend in AOD was observed in the Kara-Laptev sector between the late 1950s and the early 1930s predominantly in spring when pollution-derived aerosol dominates the Arctic atmosphere but not in the eastern sector. Although all stations are remote, those with positive trends are located closer to the anthropogenic sources of air pollution. By contrast, a widespread decline in AOD was observed between 1982 and 1990 in the eastern Arctic in spring but was limited to two sites in the western Arctic. These results suggest that the post-1982 decline in anthropogenic emissions in Europe and the former Soviet Union has had a limited effect on aerosol load in the Arctic. The post-1982 negative trends in AOD in summer, when marine aerosol is present in the atmosphere, were more common in the west. The relationships between AOD and atmospheric circulation are examined using a synoptic climatology approach. In spring, AOD depends primarily on the strength and direction of air flow. Thus strong westerly and northerly flows result in low AOD values in the East Siberian-Chukchi sector. By contrast, strong southerly flow associated with the passage of depressions results in high A OD in the Kara-Laptev sector and trajectory analysis points to the contribution of industrial regions of the sub-Arctic. In summer, low pressure gradient or anticyclonic conditions result in high atmospheric turbidity. The frequency of this weather type has declined significantly since the early 1980s in the Kara-Laptev sector, which partly explains the decline in summer AOD values. (c) 2004 Elsevier B.V. All rights reserved.

Formation of dityrosine cross-links during breadmaking

To establish its significance during commercial breadmaking, dityrosine formation was quantified in flours and doughs of six commercial wheat types at various stages of the Chorleywood Bread Process. Dityrosine was formed mainly during mixing and baking, at the levels of nmol/g dry weight. Good breadmaking flours tended to exhibit higher dityrosine content in the final bread than low quality ones, but no relationship was found for dityrosine as a proportion of flour protein content, indicating that the latter was still a dominant factor in the analysis. There was no correlation between gluten yield of the six wheat types and their typical dityrosine concentrations, suggesting that dityrosine crosslinks were not a determinant factor for gluten formation. Ascorbic acid was found to inhibit dityrosine formation during mixing and proving, and have no significant effect on dityrosine in the final bread. Hydrogen peroxide promoted dityrosine formation, which suggests a radical mechanism involving endogenous peroxidases might be the responsible for dityrosine formation during breadmaking.

Assembly rules for protein networks derived from phylogenetic-statistical analysis of whole genomes

Background: We report an analysis of a protein network of functionally linked proteins, identified from a phylogenetic statistical analysis of complete eukaryotic genomes. Phylogenetic methods identify pairs of proteins that co-evolve on a phylogenetic tree, and have been shown to have a high probability of correctly identifying known functional links. Results: The eukaryotic correlated evolution network we derive displays the familiar power law scaling of connectivity. We introduce the use of explicit phylogenetic methods to reconstruct the ancestral presence or absence of proteins at the interior nodes of a phylogeny of eukaryote species. We find that the connectivity distribution of proteins at the point they arise on the tree and join the network follows a power law, as does the connectivity distribution of proteins at the time they are lost from the network. Proteins resident in the network acquire connections over time, but we find no evidence that 'preferential attachment' - the phenomenon of newly acquired connections in the network being more likely to be made to proteins with large numbers of connections - influences the network structure. We derive a 'variable rate of attachment' model in which proteins vary in their propensity to form network interactions independently of how many connections they have or of the total number of connections in the network, and show how this model can produce apparent power-law scaling without preferential attachment. Conclusion: A few simple rules can explain the topological structure and evolutionary changes to protein-interaction networks: most change is concentrated in satellite proteins of low connectivity and small phenotypic effect, and proteins differ in their propensity to form attachments. Given these rules of assembly, power law scaled networks naturally emerge from simple principles of selection, yielding protein interaction networks that retain a high-degree of robustness on short time scales and evolvability on longer evolutionary time scales.

Conversations around homework: links to parental mental health, family characteristics and child psychological functioning

Parents are increasingly expected to supplement their children's school-based learning by providing support for children's homework. However, parents' capacities to provide such support may vary and may be limited by the experience of depression. This may have implications for child development. In the course of a prospective, longitudinal study of children of postnatally depressed and healthy mothers, we observed mothers (N = 88) and fathers (N = 78) at home during maths homework interactions with their 8-year-old children. The quality of parental communication was rated and analysed in relation to child functioning. The quality of communication of each of the parents was related to their mental state, social class and IQ. While postnatal depression was not directly related to child development, there was some evidence of the influence of maternal depression occurring in the child's school years. Different aspects of parental communication with the child showed specific associations with different child outcomes, over and above the influence of family characteristics. In particular, child school attainment and IQ were associated with parental strategies to encourage representational thinking and mastery motivation, whereas child behavioural adjustment at school and self-esteem were linked to the degree of parental emotional support and low levels of coercion. Notably, the influence of maternal homework support was more strongly related to child outcome than was paternal support, a pattern reflected in mothers' greater involvement in children's schools and school-related activities. Some parents may need guidance in how to support their children's homework if it is to be of benefit to child functioning.

Geodetic mass balance of Azarova glacier, Kodar Mountains, eastern Siberia, and its links to observed and projected climatic change

The Kodar Mountains in eastern Siberia accommodate 30 small, cold-based glaciers with a combined surface area of about 19 km2. Very little is known about these glaciers, with the first survey conducted in the late 1950s. In this paper, we use terrestrial photogrammetry to calculate changes in surface area, elevation, volume and geodetic mass balance of the Azarova Glacier between 1979 and 2007 and relate these to meteorological data from nearby Chara weather station (1938-2007). The glacier surface area declined by 20±6.9% and surface lowered on average by 20±1.8 m (mean thinning: 0.71 m a-1) resulting in a strongly negative cumulative and average mass balance of -18±1.6 m w.e. and -640±60 mm w.e.a-1 respectively. The July-August air temperature increased at a rate of 0.036oC a-1 between 1979 and 2007 and the 1980-2007 period was, on average, around 1oC warmer than 1938-1979. The regional climate projections for A2 and B2 CO2 emission scenarios developed using PRECIS regional climate model indicate that summer temperatures will increase in 2071–2100 by 2.6-4.7°C and 4.9-6.2°C respectively in comparison with 1961–1990. The annual total of solid precipitation will increase by 20% under B2 scenario but decline by 3% under A2 scenario. The length of the ablation season will extend from July–August to June-September. The Azarova Glacier exhibits high sensitivity to climatic warming due to its low elevation, exposure to comparatively high summer temperatures, and the absence of a compensating impact of cold season precipitation. Further summer warming and decline of solid precipitation projected under the A2 scenario will force Azarova to retreat further while impacts of an increase in solid precipitation projected under the B2 scenario require further investigation.

The impact of large scale atmospheric circulation patterns on wind power generation and its potential predictability: a case study over the UK

Over recent years there has been an increasing deployment of renewable energy generation technologies, particularly large-scale wind farms. As wind farm deployment increases, it is vital to gain a good understanding of how the energy produced is affected by climate variations, over a wide range of time-scales, from short (hours to weeks) to long (months to decades) periods. By relating wind speed at specific sites in the UK to a large-scale climate pattern (the North Atlantic Oscillation or "NAO"), the power generated by a modelled wind turbine under three different NAO states is calculated. It was found that the wind conditions under these NAO states may yield a difference in the mean wind power output of up to 10%. A simple model is used to demonstrate that forecasts of future NAO states can potentially be used to improve month-ahead statistical forecasts of monthly-mean wind power generation. The results confirm that the NAO has a significant impact on the hourly-, daily- and monthly-mean power output distributions from the turbine with important implications for (a) the use of meteorological data (e.g. their relationship to large scale climate patterns) in wind farm site assessment and, (b) the utilisation of seasonal-to-decadal climate forecasts to estimate future wind farm power output. This suggests that further research into the links between large-scale climate variability and wind power generation is both necessary and valuable.

Metal cluster expansion by addition of low valent group 14 reagents: III. Reaction of bis[bis(trimethylsilyl)methyl]tin with M3(CO)12 or its derivatives (M = Fe, Ru, or Os): the crystal and molecular structures of M3(μ-SnR2)2(CO)10(R = CH(SiMe3)2; M = Ru or Os)

The stannylene [SnR2] (R = CH(SiMe3)2) reacts in different ways with the three dodecacarbonyls of the iron triad: [Fe3(CO)12] gives [Fe2(CO)8(μ-SnR2)], [Ru3(CO)12] gives the planar pentametallic cluster [Ru3(CO)10(μ-SnR2)2], for which a full structural analysis is reported, while [Os3(CO)12] fails to react. Different products are also obtained from three nitrile derivatives: [Fe3-(CO)11(MeCN)] gives [Fe2(CO)6(μ-SnR2)2], which has a structure significantly different from that of known Fe2Sn2 clusters, [Ru3(CO)10(MeCN)2] gives the pentametallic cluster described above, while [Os3(CO)10(MeCN)2] gives the isostructural osmium analogue, which shows the unusual feature of a CO group bridging two osmium atoms.

Metal cluster expansion by addition of low-valent group 4B reagents: crystal and molecular structure of [Os3SnH2(CO)10{CH(SiMe3)2}2]; a compound with hydrogen bridging osmium and tin

Cluster expansion of [Os3H2(CO)10] with [SnR2][R = CH(SiMe3)2] take place in high yield to give [Os3SnH2(CO)10R2], the first closed triosmium–main-group metal cluster to be structurally characterized; a novel feature is the presence of a hydrogen atom bridging the tin atom and one of the osmium atoms.

Symmetry breaking, mixing, instability, and low frequency variability in a minimal Lorenz-like system

Starting from the classical Saltzman two-dimensional convection equations, we derive via a severe spectral truncation a minimal 10 ODE system which includes the thermal effect of viscous dissipation. Neglecting this process leads to a dynamical system which includes a decoupled generalized Lorenz system. The consideration of this process breaks an important symmetry and couples the dynamics of fast and slow variables, with the ensuing modifications to the structural properties of the attractor and of the spectral features. When the relevant nondimensional number (Eckert number Ec) is different from zero, an additional time scale of O(Ec−1) is introduced in the system, as shown with standard multiscale analysis and made clear by several numerical evidences. Moreover, the system is ergodic and hyperbolic, the slow variables feature long-term memory with 1/f3/2 power spectra, and the fast variables feature amplitude modulation. Increasing the strength of the thermal-viscous feedback has a stabilizing effect, as both the metric entropy and the Kaplan-Yorke attractor dimension decrease monotonically with Ec. The analyzed system features very rich dynamics: it overcomes some of the limitations of the Lorenz system and might have prototypical value in relevant processes in complex systems dynamics, such as the interaction between slow and fast variables, the presence of long-term memory, and the associated extreme value statistics. This analysis shows how neglecting the coupling of slow and fast variables only on the basis of scale analysis can be catastrophic. In fact, this leads to spurious invariances that affect essential dynamical properties (ergodicity, hyperbolicity) and that cause the model losing ability in describing intrinsically multiscale processes.