899 resultados para Location of Zeros
Resumo:
Estimou-se a prevalência e a incidência de parasitas intestinais em crianças e funcionários de 5 creches municipais em Botucatu/SP. Foram realizados dois estudos seccionais em 2002 (N=379) e 2003 (N=397) e um estudo longitudinal observacional, onde as crianças de 2002 e 2003 foram seguidas por um ano. Foram aplicados questionários nos funcionários e nos pais das crianças, onde foram coletadas as seguintes variáveis: nível sócio-econômico, hábitos sanitários, moradia, idade, sexo e presença de animais domésticos. Foram realizados exames coproparasitológicos nas crianças das creches. A prevalência de enteroparasitas em 2002 foi de 76,74% e 34% em 2003. As variáveis associadas à presença de enteroparasitas no ano de 2002 foram: localização das creches (OR=0,27 IC=0,15-0,47), renda familiar (OR=4,38 IC=1,91-10,04), sexo (OR=0,52 IC=0,32-0,85), faixa etária (OR=2,08 IC=1,06-4,08) e presença de animais domésticos na casa (OR=1,85 IC=1,10-3,11); em 2003, as variáveis foram: creche localizada em bairro periférico (OR=0,49 IC=0,31-0,78), renda familiar (OR=3,69 IC=2,19-6,24), nível educacional da mãe (OR=6,19 IC=1,81-21,21), sexo (OR=0,36 IC=0,36-0,93) e presença de animais domésticos (OR=1,68 IC=1,01-2,79). A coorte foi integrada por 253 crianças apresentando incidência de 23,22%. Os dados deste estudo evidenciam situações de risco em populações específicas (creches) e poderiam ser utilizados por Instituições que promovem o cuidado com as crianças.
Resumo:
G- and C- banding patterns of seven species of the bat family Molossidae, Eumops glaucinus, E. perotis; Molossops abrasus, M. remminckii, Molossus ater, M. molossus, and Nyctinomops laticaudatus, were identified. Comparisons among the karyotypes of these species showed extensive homologies between E. perotis, M. ater, M. molossus, M. abrasus, and N. laticaudatus, demonstrating inter- and intrageneric conservatism, and a lesser degree of homologies in M. temminckii and glaucinus, reflecting intrageneric variation, Chromosomal variation was due to inversions, Robertsonian rearrangements, translocations, and variations in the location of constitutive heterochromatin and nucleolus organizer regions. The chromosome corresponding to No. 5 in the M. ater karyotype is discussed. We suggest that the Nyctinomops and Molossops karyotypes represent the primitive condition and that Molossus and Eumops have derived karyotypes.
Resumo:
With the purpose of enhancing the efficacy of microparticle-encapsulated therapeutic agents, in this study we evaluated the phagocytic ability of rat peritoneal exudate cells and the preferential location of poly(D,L-lactide-co-glycolic acid) (PLGA) microparticles inside these cells. The microparticles used were produced by a solvent evaporation method and were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Size distribution analysis using DLS and SEM showed that the particles were spherical, with diameters falling between 0.5 and 1.5 mu m. Results from cell adhesion by SEM assay, indicated that the PLGA microparticles are not toxic to cells and do not cause any distinct damage to them as confirmed by the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay. Among the large variety of cell populations found in the peritoneal exudates (neutrophils, eosinophils, monocytes, and macrophages), TEM showed that only the latter phagocytosed PLGA microparticles, in a time-dependent manner. The results obtained indicate that the microparticles studied show merits as possible carriers of drugs for intracellular delivery.
Resumo:
We analyzed the ITS-1 spacer region of the rDNA in Drosophila mulleri and D. arizonae, two sibling species belonging to the mulleri complex (repleta group) and in hybrids obtained in both cross directions. In spite of several previous studies showing the incompatibility of crosses involving D. arizonae females and D. mulleri males, we were able to obtain hybrids in this direction. Complete ITS-1 region was amplified using primers with homology at the 3'-end of the 18S rDNA and the 5'-end of the 5.8S rDNA genes. Our data demonstrated that D. mulleri and D. arizonae can be differentiated as they present a difference in length for the ITS-1 region. The amplified fragment for this region in D. mulleri has a length of 600 bp, whereas in D. arizonae this fragment is about 500 bp. It was also observed that male and female hybrids obtained in both cross directions present two amplified fragments, confirming the location of the ribosomal cistrons in the X chromosomes and microchromosomes of both parental species.
Resumo:
The coagulation factor IX gene (179), the hypoxanthine phosphoribosyl transferase 1 gene (HPRT1), and the X-inactive specific transcript gene (XIST) were physically assigned in cattle to analyze chromosomal breakpoints on BTAX recently identified by radiation hybrid (RH) mapping experiments. Whereas the FISH assignment of XIST indicates a similar location on the q-arm of the human and cattle X chromosomes, the locus of HPRT1 supported the assumption of a chromosome rearrangement between the distal half of the q-arm of HSAX and the p-arm of BTAX identified by RH mapping. F9 previously located on the Cl-arm of BTAX was assigned to the p-arm of BTAX using RH mapping and FISH. The suggested new position of F9 close to HPRT I supports the homology between HSAXq and BTAXp. The F9 locus corresponds with the gene order found in the homologous human chromosome segment. XIST was assigned on BTAXq23, HPRT1 and F9 were mapped to BTAXp22, and the verification of the location of F9 in a 5000 rad cattle-hamster whole genome radiation hybrid panel linked the gene to markers URB10 and HPRT1. Copyright (C) 2003 S. Karger AG, Basel.
Resumo:
An analysis of the performance of six major methods of loss allocation for generators and demands was conducted, based on pro-rata (two), on incremental factors (two), on proportional sharing (PS) (one), and on electric circuit theory (one). Using relatively simple examples which can easily be checked, the advantages and disadvantages of each were ascertained and the results confirmed using a larger sample system (IEEE-118). The discussion considers the location and size of generators and demands, as well as the merits of the location of these agents for each configuration based on an analysis of the effect of various network modifications. Furthermore, an application in the South-Southeastern Brazilian Systems is performed. Conclusions and recommendations are presented. (C) 2004 Elsevier B.V. All rights reserved.
Resumo:
The objective of this work was to model and diagnose the spatial variability of soil load support capacity (SLSC) in sugar cane crop fields, as well as to evaluate the management impact on São Paulo State soil structure. The investigated variables were: pressure preconsolidation (sigma(p)), apparent cohesion () and internal friction angle (). The conclusions from the results were that the models and spatial dependence maps constitute important tools in the prediction and location of the mechanical internal strength of soils cultivated with sugar cane. They will help future soil management decisions so that soil structure sustainability will not be compromised.
Resumo:
Microfacies analysis of marine carbonates cored by Petrobras well 1-SPS-6 in the offshore Santos Basin (southeastern Brazil) has revealed a remarkable fossil assemblage of calpionellids (colomiellids), favusellids, hedbergellids, globigerinelloidids, buliminids, radiolarians, inoceramid prisms, roveacrinids, and saccocomids(?) preserved in lower Albian calcimudstones-wackestones of the lower part of the Guaruja Formation. This assemblage represents an allochtonous accumulation in a deep neritic to shallow bathyal hypoxic environment. Besides 'saccocomid-like' sections, the only determinable sections of roveacrinids are thecal plates of Poecilocrinus dispandus elongatus Peck, 1943. This species was previously only known from the Weno Formation of Texas. The Brazilian material extends its records farther south from at least the lower Albian, which then represents the earliest occurrence of this peculiar family in the South Atlantic region. Taking into account their Albian global distribution and the location of their oldest representative (Hauterivian near Alicante, Spain), the Roveacrinidae dispersed westward throughout all of Cretaceous Tethys. The Tethyan origin of Roveacrinidae is further evidence that, during late Aptian-Albian times, the northern South Atlantic (north of the Walvis-SBo Paulo Ridge) was supplied by a Tethyan water mass. (C) 2001 Elsevier B.V. Ltd. All rights reserved.
Resumo:
Visual communication is widespread among several anuran families, but seems to be more common than currently thought. We investigated and compared visual communication in six species of an anuran community in the Brazilian Atlantic forest. Four are nocturnal species: Hyalinobatrachium uranoscopum (Centrolenidae), Hyla albomarginata, Hyla sp. (aff. ehrhardti), and Scinax eurydice (Hylidae), and two are diurnal species: Hylodes phyllodes and Hylodes asper ( Leptodactylidae). For H. uranoscopum, H. albomarginata, S. eurydice, and H. phyllodes, this is the first record of visual communication. Observations were made at Nucleo Picinguaba, Parque Estadual da Serra do Mar, in the Municipality of Ubatuba, State of São Paulo, Brazil. Descriptions of behaviour were based on individuals observed in the field, using sequence sampling with continuous tape recording for behavioural observations. Eight new behaviours are described: body wiping, face wiping, jump display, leg kicking, limb lifting, mouth opening, toe flagging, and vocal sac display. of the 42 anuran species known from Nucleo Picinguaba, at least six ( approximately 14%) display visual communication. The evolution of visual signals in these species may be related to the availability of ambient light, the structural complexity of the habitat, and/or the ambient noise. They may also have evolved to aid in the location of the individual, to avoid physical combat, and/or may be a by-product of seismic communication.
Resumo:
A linearly tunable low-voltage CMOS transconductor featuring a new adaptative-bias mechanism that considerably improves the stability of the processed-signal common,mode voltage over the tuning range, critical for very-low voltage applications, is introduced. It embeds a feedback loop that holds input devices on triode region while boosting the output resistance. Analysis of the integrator frequency response gives an insight into the location of secondary poles and zeros as function of design parameters. A third-order low-pass Cauer filter employing the proposed transconductor was designed and integrated on a 0.8-mum n-well CMOS standard process. For a 1.8-V supply, filter characterization revealed f(p) = 0.93 MHz, f(s) = 1.82 MHz, A(min) = 44.08, dB, and A(max) = 0.64 dB at nominal tuning. Mined by a de voltage V-TUNE, the filter bandwidth was linearly adjusted at a rate of 11.48 kHz/mV over nearly one frequency decade. A maximum 13-mV deviation on the common-mode voltage at the filter output was measured over the interval 25 mV less than or equal to V-TUNE less than or equal to 200 mV. For V-out = 300 mV(pp) and V-TUNE = 100 mV, THD was -55.4 dB. Noise spectral density was 0.84 muV/Hz(1/2) @1 kHz and S/N = 41 dB @ V-out = 300 mV(pp) and 1-MHz bandwidth. Idle power consumption was 1.73 mW @V-TUNE = 100 mV. A tradeoff between dynamic range, bandwidth, power consumption, and chip area has then been achieved.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
INTRODUCTION: Visual analysis is widely used to interpret regional cerebral blood flow (rCBF) SPECT images in clinical practice despite its limitations. Automated methods are employed to investigate between-group rCBF differences in research Studies but have rarely been explored in individual analyses.OBJECTIVES: To compare visual inspection by nuclear physicians with the automated statistical parametric mapping program using a SPECT dataset of patients with neurological disorders and normal control images.METHODS: Using statistical parametric mapping, 14 SPECT images from patients with various neurological disorders were compared individually with a databank of 32 normal images using a statistical threshold of p<0.05 (corrected for multiple comparisons at the level of individual voxels or clusters). Statistical parametric mapping results were compared with Visual analyses by a nuclear physician highly experienced in neurology (A) as well as a nuclear physician with a general background of experience (B) who independently classified images as normal or altered, and determined the location of changes and the severity.RESULTS: of the 32 images of the normal databank, 4 generated maps showing rCBF abnormalities (p<0.05, corrected). Among the 14 images from patients with neurological disorders, 13 showed rCBF alterations. Statistical parametric mapping and physician A completely agreed on 84.37% and 64.28% of cases from the normal databank and neurological disorders, respectively. The agreement between statistical parametric mapping and ratings of physician B were lower (71.18% and 35.71%, respectively).CONCLUSION: Statistical parametric mapping replicated the findings described by the more experienced nuclear physician. This finding suggests that automated methods for individually analyzing rCBF SPECT images may be a valuable resource to complement visual inspection in clinical practice.
Resumo:
The surgical removal of impacted, supernumerary, or ectopic teeth is a routine procedure to the dental surgeon. Because any and all surgical interventions involve anatomic considerations that predispose the patient to a high risk of incidents or complications, it is absolutely necessary to precisely determine the location of the enclosed teeth, to better plan the procedure. Even though the conventional radiographic techniques are commonly used to detect the presence of such teeth, they can present deficiencies. In those situations, additional examinations can be requested. In this article, we are reporting the case of a 12-year-old patient, whose third superior molars appeared in a very atypical position. We chose to request a computed tomography and three-dimensional manipulation of the obtained images. This article, as its main goal, highlighted the importance of computed tomography and of three-dimensional reconstructions as a tool to precisely determine the location of enclosed teeth, thus allowing for a better planning of the surgery and a safer surgical intervention.
Resumo:
The temperature and velocity distributions of the air inside the cabinet of domestic refrigerators affect the quality of food products. If the consumer knows the location of warm and cold zones in the refrigerator, the products can be placed in the right zone. In addition, the knowledge of the thickness of thermal and hydrodynamic boundary layers near the evaporator and the other walls is also important. If the product is too close to the evaporator wall, freezing can occur, and if it is too close to warm walls, the products can be deteriorated. The aim of the present work is to develop a steady state computational fluid dynamics (CFD) model for domestic refrigerators working on natural convection regime. The Finite Volume Methodology is chosen as numerical procedure for discretizing the governing equations. The SIMPLE-Semi-Implicit Method for Pressure-Linked Equations algorithm applied to a staggered mesh was used for solving the pressure-velocity coupling problem. The Power-Law scheme is employed as interpolation function for the convective-diffusive terms, and the TDMA-Tri-Diagonal Matrix Algorithm is used to solve the systems of algebraic equations. The model is applied to a commercial static refrigerator, where the cabinet is considered an empty three-dimensional rectangular cavity with one drawer at the bottom of the cabinet, but without shelves. In order to analyze the velocity and temperature fields of the air flow inside the cabinet the evaporator temperature, Te, was varied from -20 degrees C to 0 degrees C, and nine different evaporator positions are evaluated for evaporator temperature of -15 degrees C. The cooling capacity of the evaporator for the steady state regime is also computed for each case. One can conclude that the vertical positioning of the evaporator inside the cabinet plays an important role on the temperature distribution inside the cabinet.
Resumo:
Colour preference of individual juvenile rainbow trout Oncorhynchus mykiss was tested at 1 and 12 degrees C, and also at 12 degrees C after a 42 day growth experiment under white, blue, green, yellow or red ambient colour. All experiments were carried out under controlled laboratory conditions and the preference was assessed by the location of the fish in a preference tank with four chambers. Rainbow trout showed a preference for blue and green at 1 degrees C and for green at 12 degrees C. After the growth experiment the fish reared in blue tanks preferred blue and green but green was the most preferred colour for the fish reared in green, yellow and red tanks. Yellow and especially red chambers were avoided, irrespective of the ambient colour during the growth trial. The final mass of fish reared in the red aquaria was significantly smaller than that of the fish in green tanks. In addition, when the data of the preference tests were correlated with the data of the growth experiment using mean values of the four tested colours, a very good linear relationship was observed between the preference (i.e. visit frequency in coloured compartments) and growth rate as well as food intake. When considering the results both from the preference and growth trials it is suggested that green is the best environmental colour for rearing juvenile rainbow trout while rearing in a red environment cannot be recommended. (c) 2008 The Authors Journal compilation (c) 2008 The Fisheries Society of the British Isles.