Balancing software engineering education and industrial needs

In the world of information and communications technologies the demand for professionals with software engineering skills grows at an exponential rate. On this ground, we have conducted a study to help both academia and the software industry form a picture of the relationship between the competences of recent graduates of undergraduate and graduate software engineering programmes and the tasks that these professionals are to perform as part of their jobs in industry. Thanks to this study, academia will be able to observe which skills demanded by industry the software engineering curricula do or do not cater for, and industry will be able to ascertain which tasks a recent software engineering programme graduate is well qualified to perform. The study focuses on the software engineering knowledge guidelines provided in SE2004 and GSwE2009, and the job profiles identified by Career Space.

Dynamic response of hydro power plants to load variations for providing secondary regulation reserves considering elastic water column effects

In this paper, the dynamic response of a hydro power plant for providing secondary regulation reserve is studied in detail. S pecial emphasis is given to the elastic water column effects both in the penstock and the tailrace tunnel. For this purpose, a nonline ar model based on the analogy between mass and momentum conservation equations of a water conduit and those of wave propagation in transmission lines is used. The influence of the plant configuration and design parameters on the fulfilment of the Spanish Electrical System Operator requirem ents is analysed.

Load displacement in grape harvesters: Discrete Element Analysis.

Dynamic weighing of the hopper in grape harvesters is affected by a number of factors. One of them is the displacement of the load inside the hopper as a consequence of the terrain topography. In this work, the weight obtained by a load cell in a grape harvester has been analysed and quantified using the discrete element method (DEM). Different models have been developed considering different scenarios for the terrain.

Loss model for a high frequency and low load DC/DC synchronous buck converter

This work presents a behavioral-analytical hybrid loss model for a buck converter. The model has been designed for a wide operating frequency range up to 4MHz and a low power range (below 20W). It is focused on the switching losses obtained in the power MOSFETs. Main advantages of the model are the fast calculation time and a good accuracy. It has been validated by simulation and experimentally with one Ga, power transistor and two Si MOSFETs. Results show good agreement between measurements and the model.

Hybrid behavioral-analytical loss model for a high frequency and low load DC/DC buck converter

This work presents a behavioral-analytical hybrid loss model for a buck converter. The model has been designed for a wide operating frequency range up to 4MHz and a low power range (below 20W). It is focused on the switching losses obtained in the power MOSFETs. Main advantages of the model are the fast calculation time (below 8.5 seconds) and a good accuracy, which makes this model suitable for the optimization process of the losses in the design of a converter. It has been validated by simulation and experimentally with one GaN power transistor and three Si MOSFETs. Results show good agreement between measurements and the model

Design of a twin capacitive load and its application to the outdoor rating of photovoltaic modules

This paper describes the design of an original twin capacitive load that is able of tracing simultaneously the I?V characteristics of two photovoltaic modules. Besides, an example of the application of this dual system to the outdoor rating of photovoltaic modules is presented, whose results have shown a good degree of repeatability.

El papel de la hidroelectricidad en el contexto de las energías renovables en España

En el artículo se discute el papel de la energía hidroeléctrica en el marco del sistema eléctrico español, donde existe una elevada penetración de energías no gestionables con una tendencia clara a aumentar en los próximos años. El desarrollo de nuevas centrales hidroeléctricas se basará probablemente en centrales reversibles. La energía hidroeléctrica es una tecnología madura y eficiente para el almacenamiento de energía a gran escala y contribuye por tanto de manera decisiva a la integración de fuentes renovables no gestionables. Los beneficios obtenidos con la operación punta-valle pueden ser insuficientes para compensar el coste de una nueva central. Sin embargo, los ingresos obtenidos pueden incrementarse sustancialmente mediante su participación en los servicios de ajuste del sistema. Ello requeriría un diseño apropiado del mercado eléctrico. La contribución de las centrales hidráulicas reversibles al balance producción-consumo puede extenderse a las horas valle utilizando, bien bombeo en velocidad variable o bien una configuración de cortocircuito hidráulico. La necesidad de mitigar los efectos hidrológicos aguas abajo de las centrales hidroeléctricas puede introducir algunas restricciones en la operación que limitaría de algún modo los servicios descritos más arriba. Sin embargo, cabe esperar que los efectos ambientales provocados por las centrales hidráulicas reversibles sean significativamente menores. In this paper the role of hydropower in electric power systems is discussed, in the framework of the Spanish system, where a high penetration of intermittent power sources exists, showing a clear trend to increase in next years. The development of new hydro power facilities will be likely based on pumped storage hydro power plants. Hydropower is a mature and efficient technology for large-scale energy storage and therefore represents a key contribution for the integration of intermittent power sources, such as wind or photovoltaic. The benefits obtained from load shifting may be insufficient to compensate the costs of a new plant. However, the obtained revenues can significantly increase through its contribution to providing ancillary services. This would require an appropriate design of the electricity market. The contribution of pumped storage hydro power plants to balancing services can be extended to off-peak hours, using either variable speed pumping or the hydraulic shortcircuit configuration. The need to mitigate hydrological effects downstream of hydro plants may introduce some operational constraints which could limit to some extent the services described above. However environmental effects caused by pumped storage hydro power plants are expected to be significantly smaller.

Space-state robust control of a Buck converter with amorphous core coil and variable load

Pulse-width modulation is widely used to control electronic converters. One of the most frequently used topologies for high DC voltage/low DC voltage conversion is the Buck converter. These converters are described by a second order system with an LC filter between the switching subsystem and the load. The use of a coil with an amorphous magnetic material core rather than an air core permits the design of smaller converters. If high switching frequencies are used to obtain high quality voltage output, then the value of the auto inductance L is reduced over time. Robust controllers are thus needed if the accuracy of the converter response must be preserved under auto inductance and payload variations. This paper presents a robust controller for a Buck converter based on a state space feedback control system combined with an additional virtual space variable which minimizes the effects of the inductance and load variations when a switching frequency that is not too high is applied. The system exhibits a null steady-state average error response for the entire range of parameter variations. Simulation results and a comparison with a standard PID controller are also presented.

3-Phase Rectifier System with very demanding dynamic load: Architecture analysis and control strategy

A distributed power architecture for aerospace application with very restrictive specifications is analyzed. Parameters as volume, weight and losses are analyzed for the considered power architectures. In order to protect the 3 phase generator against high load steps, an intermediate bus (based in a high capacitance) to provide energy to the loads during the high load steps is included. Prototypes of the selected architecture for the rectifier and EMI filter are built and the energy control is validated.

A review of load models for the prediction of footfall-induced vibration in structures

Crowd induced dynamic loading in large structures, such as gymnasiums or stadium, is usually modelled as a series of harmonic loads which are defined in terms of their Fourier coefficients. Different values of these coefficients that were obtained from full scale measurements can be found in codes. Recently, an alternative has been proposed, based on random generation of load time histories that take into account phase lag among individuals inside the crowd. This paper presents the testing done on a structure designed to be a gymnasium. Two series of dynamic test were performed on the gym slab. For the first test an electrodynamic shaker was placed at several locations and during the second one people located inside a marked area bounced and jumped guided by different metronome rates. A finite element model (FEM) is presented and a comparison of numerically predicted and experimentally observed vibration modes and frequencies has been used to assess its validity. The second group of measurements will be compared with predictions made using the FEM model and three alternatives for crowd induced load modelling.

On the layout of a least weight single span structure with uniform load. Some comments and improvements

Beghini et al (Struct Multidisc Optim doi:10.1007/s00158-013-1030-6, 2013) have published a very interesting paper arriving to practically the same nearly optimal solutions for the so named “bridge prob- lem” that the Writers published a year before, but using an alternative and remarkable approach to the problem. In spite of this general agreement, the Writers think that some details of the paper can be improved and there are results that can be given a clear and mean- ingful interpretation thanks to an old and practically unknown theorem on optimal slenderness.

Discrete element analysis for the assessment of the accuracy of load cell-based dynamic weighing systems in grape harvesters under different ground conditions

Dynamic weighing systems based on load cells are commonly used to estimate crop yields in the field. There is lack of data, however, regarding the accuracy of such weighing systems mounted on harvesting machinery, especially on that used to collect high value crops such as fruits and vegetables. Certainly, dynamic weighing systems mounted on the bins of grape harvesters are affected by the displacement of the load inside the bin when moving over terrain of changing topography. In this work, the load that would be registered in a grape harvester bin by a dynamic weighing system based on the use of a load cell was inferred by using the discrete element method (DEM). DEM is a numerical technique capable of accurately describing the behaviour of granular materials under dynamic situations and it has been proven to provide successful predictions in many different scenarios. In this work, different DEM models of a grape harvester bin were developed contemplating different influencing factors. Results obtained from these models were used to infer the output given by the load cell of a real bin. The mass detected by the load cell when the bin was inclined depended strongly on the distribution of the load within the bin, but was underestimated in all scenarios. The distribution of the load was found to be dependent on the inclination of the bin caused by the topography of the terrain, but also by the history of inclination (inclination rate, presence of static periods, etc.) since the effect of the inertia of the particles (i.e., representing the grapes) was not negligible. Some recommendations are given to try to improve the accuracy of crop load measurement in the field.

Balancing management and preservation of mediterranean scattered oak woodlands (Dehesas) in human-dominated landscapes

Los sistemas agroforestales mediterráneos tienen una gran importancia ecológica y socioeconómica, y mantienen altos valores medioambientales y de diversidad biológica a la vez que producen importantes servicios ecosistémicos. Estos sistemas han sido testigos de diversos cambios rápidos y drásticos en su gestión y aprovechamiento durante el último siglo. La mayor parte de la investigación desarrollada en esta tesis doctoral ha sido llevada a cabo en las dehesas españolas. Esta tesis nos muestra: i) la evidencia de la existencia de un cambio global del estrato arbóreo y del manejo del pastoreo en el todo el área de distribución de la dehesa durante los últimos 60 años; ii) la importancia del papel que juega el arbolado disperso y el adecuado manejo del ganado en la mejora de la producción, calidad y diversidad de las comunidades herbáceas, que a su vez, un pasto herbáceo bien desarrollado es importante para la rentabilidad del sistema, evaluando estos efectos bajo distintos escenarios de clima y calidad de estación; y iii) la evidencia de la falta de regeneración en sistemas agroforestales mediterráneos bajo distintos tipos de manejo del pastoreo, y además se evalúa el crecimiento y desarrollo de las pocas plántulas existentes que serán las que aseguren la viabilidad y persistencia y de estos sistemas. El arbolado disperso de estos sistemas ha experimentado una reducción importante en su densidad arbórea y fracción de cabida cubierta durante el periodo entre 1950-1980 donde tuvieron lugar importantes transformaciones en la actividad agropecuaria. La cabaña ganadera de ovino disminuyó drásticamente en los años 70 en comparación a la de bovino que desde entonces ha aumentado progresivamente hasta la actualidad. Por otro lado, el mismo tipo de manejo del ganado doméstico (especialmente bovino) durante bastante tiempo (mínimo 30 años) provocó una reducción significativa de la densidad de las plántulas. Además la probabilidad de ocurrencia y la intensidad de daños por herbivoría fue mayor bajo pastoreo bovino (con daños más intensos y consistentes) que bajo pastoreo ovino o sin pastoreo doméstico (presencia de ciervos). También el patrón de crecimiento de las plantas jóvenes estuvo afectado por el tipo de manejo, generando plántulas achaparradas en el caso del bovino y plántulas esbeltas favoreciendo el crecimiento en altura en el caso del ovino. La presencia de un arbolado disperso generó una mayor diversidad y variación en la producción de las comunidades herbáceas según las condiciones de disponibilidad de agua. Especialmente, el ecotono como microhábitat sostuvo altos valores de diversidad herbácea. La presencia del ganado bajo pastoreo continuo de intensidad moderada a alta, especialmente el bovino, incrementó los rendimientos de producción y diversidad del estrato herbáceo. Los resultados de esta tesis nos muestran la importancia que tiene la existencia de un equilibrio entre la producción y la conservación de los sistemas agroforestales mediterráneos para obtener una producción sostenible de servicios ecosistémicos mientras se asegura la perpetuación del sistema a largo plazo. Es crucial diseñar planes de gestión incorporando objetivos de conservación que integren técnicas silvopastorales apropiadas para poder aplicar en los sistemas agroforestales mediterráneos. ABSTRACT Mediterranean scattered oak woodlands have great ecological and socio-economic importance, supporting high environmental and amenity values, and relatively rich biological diversity while producing important ecosystem services. They have been witnesses of different and fast changes developed in the last century. Most of the research developed in this dissertation has conducted within dehesas. This thesis provides: i) the global change evidence of the tree layer and grazing management experienced in the land-use range of a Mediterranean scattered oak woodland (dehesa) over the last 60 years; ii) the important role of scattered trees and adequate management grazing in the improvement of grassland yield, quality and diversity - which it is important, in turn, for the system profitability - under different climate scenarios and site quality; and iii) the lack of oak regeneration evidence under some given representative management regimes and how is the growth development of these plants to assure the viability and persistence of Mediterranean scattered oak woodlands. Tree layer experienced a significant reduction in dehesas during 1950-1980 period where the highest human impacts took place. Sheep herd decreased drastically during the 1970s and, in contrast, cattle have been increasing gradually since then. On the other hand, same livestock grazing management (especially cattle) during long time (minimum 30 years) within Mediterranean scattered oak woodlands reduced strongly the density of young oak plants and showed high probability of herbivory occurrence and intensity. Young plant growth pattern was greatly modified by livestock. Cattle grazing generated stunted plants and sheep grazing generated slender plants favoring the height growth. Microsites created by large trees modified the herbaceous yield according the water availability of the year and generated high plant diversity within herbaceous communities. Especially, ecotone microsite supported high values of herbaceous diversity. The presence of livestock species increased the herbaceous yield and maintained a more diverse community under continuous grazing at both moderate and high intensities; especially cattle. Thus, around the influence of scattered trees there is a high amount of different interactions among livestock, trees and grasslands maintaining and enhancing the quality of whole dehesa system. The results of this thesis highlight how important is balancing management and preservation of Mediterranean scattered oak woodlands to obtain the optimum ecosystem services while the system conservation is assured for a long-term. It is crucial to design management plans with conservation goals that include appropriate silvopastoral practices in Mediterranean scattered oak woodlands.

Balancing management and preservation of mediterranean scattered oak woodlands (Dehesas) in human-dominated landscapes

Los sistemas agroforestales mediterráneos tienen una gran importancia ecológica y socioeconómica, y mantienen altos valores medioambientales y de diversidad biológica a la vez que producen importantes servicios ecosistémicos. Estos sistemas han sido testigos de diversos cambios rápidos y drásticos en su gestión y aprovechamiento durante el último siglo. La mayor parte de la investigación desarrollada en esta tesis doctoral ha sido llevada a cabo en las dehesas españolas. Esta tesis nos muestra: i) la evidencia de la existencia de un cambio global del estrato arbóreo y del manejo del pastoreo en el todo el área de distribución de la dehesa durante los últimos 60 años; ii) la importancia del papel que juega el arbolado disperso y el adecuado manejo del ganado en la mejora de la producción, calidad y diversidad de las comunidades herbáceas, que a su vez, un pasto herbáceo bien desarrollado es importante para la rentabilidad del sistema, evaluando estos efectos bajo distintos escenarios de clima y calidad de estación; y iii) la evidencia de la falta de regeneración en sistemas agroforestales mediterráneos bajo distintos tipos de manejo del pastoreo, y además se evalúa el crecimiento y desarrollo de las pocas plántulas existentes que serán las que aseguren la viabilidad y persistencia y de estos sistemas. El arbolado disperso de estos sistemas ha experimentado una reducción importante en su densidad arbórea y fracción de cabida cubierta durante el periodo entre 1950-1980 donde tuvieron lugar importantes transformaciones en la actividad agropecuaria. La cabaña ganadera de ovino disminuyó drásticamente en los años 70 en comparación a la de bovino que desde entonces ha aumentado progresivamente hasta la actualidad. Por otro lado, el mismo tipo de manejo del ganado doméstico (especialmente bovino) durante bastante tiempo (mínimo 30 años) provocó una reducción significativa de la densidad de las plántulas. Además la probabilidad de ocurrencia y la intensidad de daños por herbivoría fue mayor bajo pastoreo bovino (con daños más intensos y consistentes) que bajo pastoreo ovino o sin pastoreo doméstico (presencia de ciervos). También el patrón de crecimiento de las plantas jóvenes estuvo afectado por el tipo de manejo, generando plántulas achaparradas en el caso del bovino y plántulas esbeltas favoreciendo el crecimiento en altura en el caso del ovino. La presencia de un arbolado disperso generó una mayor diversidad y variación en la producción de las comunidades herbáceas según las condiciones de disponibilidad de agua. Especialmente, el ecotono como microhábitat sostuvo altos valores de diversidad herbácea. La presencia del ganado bajo pastoreo continuo de intensidad moderada a alta, especialmente el bovino, incrementó los rendimientos de producción y diversidad del estrato herbáceo. Los resultados de esta tesis nos muestran la importancia que tiene la existencia de un equilibrio entre la producción y la conservación de los sistemas agroforestales mediterráneos para obtener una producción sostenible de servicios ecosistémicos mientras se asegura la perpetuación del sistema a largo plazo. Es crucial diseñar planes de gestión incorporando objetivos de conservación que integren técnicas silvopastorales apropiadas para poder aplicar en los sistemas agroforestales mediterráneos. ABSTRACT Mediterranean scattered oak woodlands have great ecological and socio-economic importance, supporting high environmental and amenity values, and relatively rich biological diversity while producing important ecosystem services. They have been witnesses of different and fast changes developed in the last century. Most of the research developed in this dissertation has conducted within dehesas. This thesis provides: i) the global change evidence of the tree layer and grazing management experienced in the land-use range of a Mediterranean scattered oak woodland (dehesa) over the last 60 years; ii) the important role of scattered trees and adequate management grazing in the improvement of grassland yield, quality and diversity - which it is important, in turn, for the system profitability - under different climate scenarios and site quality; and iii) the lack of oak regeneration evidence under some given representative management regimes and how is the growth development of these plants to assure the viability and persistence of Mediterranean scattered oak woodlands. Tree layer experienced a significant reduction in dehesas during 1950-1980 period where the highest human impacts took place. Sheep herd decreased drastically during the 1970s and, in contrast, cattle have been increasing gradually since then. On the other hand, same livestock grazing management (especially cattle) during long time (minimum 30 years) within Mediterranean scattered oak woodlands reduced strongly the density of young oak plants and showed high probability of herbivory occurrence and intensity. Young plant growth pattern was greatly modified by livestock. Cattle grazing generated stunted plants and sheep grazing generated slender plants favoring the height growth. Microsites created by large trees modified the herbaceous yield according the water availability of the year and generated high plant diversity within herbaceous communities. Especially, ecotone microsite supported high values of herbaceous diversity. The presence of livestock species increased the herbaceous yield and maintained a more diverse community under continuous grazing at both moderate and high intensities; especially cattle. Thus, around the influence of scattered trees there is a high amount of different interactions among livestock, trees and grasslands maintaining and enhancing the quality of whole dehesa system. The results of this thesis highlight how important is balancing management and preservation of Mediterranean scattered oak woodlands to obtain the optimum ecosystem services while the system conservation is assured for a long-term. It is crucial to design management plans with conservation goals that include appropriate silvopastoral practices in Mediterranean scattered oak woodlands.

Limit load instabilities in structural elements

Este trabajo analiza distintas inestabilidades en estructuras formadas por distintos materiales. En particular, se capturan y se modelan las inestabilidades usando el método de Riks. Inicialmente, se analiza la bifurcación en depósitos cilíndricos formados por material anisótropo sometidos a carga axial y presión interna. El análisis de bifurcación y post-bifurcación asociados con cilindros de pared gruesa se formula para un material incompresible reforzado con dos fibras que son mecánicamente equivalentes y están dispuestas simétricamente. Consideramos dos casos en la naturaleza de la anisotropía: (i) Fibras refuerzo que tienen una influencia particular sobre la respuesta a cortante del material y (ii) Fibras refuerzo que influyen sólo si la fibra cambia de longitud con la deformación. Se analiza la propagación de las inestabilidades. En concreto, se diferencia en el abultamiento (bulging) entre la propagación axial y la propagación radial de la inestabilidad. Distintos modelos sufren una u otra propagación. Por último, distintas inestabilidades asociadas al mecanismo de ablandamiento del material (material softening) en contraposición al de endurecimiento (hardening) en una estructura (viga) de a: hormigón y b: hormigón reforzado son modeladas utilizando una metodología paralela a la desarrollada en el análisis de inestabilidades en tubos sometidos a presión interna. This present work deals with the instability of structures made of various materials. It captures and models different types of instabilities using numerical analysis. Firstly, we consider bifurcation for anisotropic cylindrical shells subject to axial loading and internal pressure. Analysis of bifurcation and post bifurcation of inflated hyperelastic thick-walled cylinder is formulated using a numerical procedure based on the modified Riks method for an incompressible material with two preferred directions which are mechanically equivalent and are symmetrically disposed. Secondly, bulging/necking motion in doubly fiber-reinforced incompressible nonlinearly elastic cylindrical shells is captured and we consider two cases for the nature of the anisotropy: (i) reinforcing models that have a particular influence on the shear response of the material and (ii) reinforcing models that depend only on the stretch in the fiber direction. The different instability motions are considered. Axial propagation of the bulging instability mode in thin-walled cylinders under inflation is analyzed. We present the analytical solution for this particular motion as well as for radial expansion during bulging evolution. For illustration, cylinders that are made of either isotropic incompressible non-linearly elastic materials or doubly fiber reinforced incompressible non-linearly elastic materials are considered. Finally, strain-softening constitutive models are considered to analyze two concrete structures: a reinforced concrete beam and an unreinforced notch beam. The bifurcation point is captured using the Riks method used previously to analyze bifurcation of a pressurized cylinder.