Management of public water supply to reduce energy cost and improve wind power uptake

This paper presents a study on the implementation of Real-Time Pricing (RTP) based Demand Side Management (DSM) of water pumping at a clean water pumping station in Northern Ireland, with the intention of minimising electricity costs and maximising the usage of electricity from wind generation. A Genetic Algorithm (GA) was used to create pumping schedules based on system constraints and electricity tariff scenarios. Implementation of this method would allow the water network operator to make significant savings on electricity costs while also helping to mitigate the variability of wind generation.

Management of public water supply to reduce energy cost and improve wind power uptake

This paper presents a study on the implementation of Real-Time Pricing (RTP) based Demand Side Management (DSM) of water pumping at a clean water pumping station in Northern Ireland, with the intention of minimising electricity costs and maximising the usage of electricity from wind generation. A Genetic Algorithm (GA) was used to create pumping schedules based on system constraints and electricity tariff scenarios. Implementation of this method would allow the water network operator to make significant savings on electricity costs while also helping to mitigate the variability of wind generation.

Design and Flux-Weakening Control of an Interior Permanent Magnet Synchronous Motor for Electric Vehicles

Permanent magnet synchronous motors (PMSMs) provide a competitive technology for EV traction drives owing to their high power density and high efficiency. In this paper, three types of interior PMSMs with different PM arrangements are modeled by the finite element method (FEM). For a given amount of permanent magnet materials, the V-shape interior PMSM is found better than the U-shape and the conventional rotor topologies for EV traction drives. Then the V-shape interior PMSM is further analyzed with the effects of stator slot opening and the permanent magnet pole chamfering on cogging torque and output torque performance. A vector-controlled flux-weakening method is developed and simulated in Matlab to expand the motor speed range for EV drive system. The results show good dynamic and steady-state performance with a capability of expanding speed up to four times of the rated. A prototype of the V-shape interior PMSM is also manufactured and tested to validate the numerical models built by the FEM.

Web-based museum trails on PDAs for university-level design students: Design and evaluation

This paper describes the development and evaluation of web-based museum trails for university-level design students to access on handheld devices in the Victoria and Albert Museum (V&A) in London. The trails offered students a range of ways of exploring the museum environment and collections, some encouraging students to interpret objects and museum spaces in lateral and imaginative ways, others more straightforwardly providing context and extra information. In a three-stage qualitative evaluation programme, student feedback showed that overall the trails enhanced students’ knowledge of, interest in, and closeness to the objects. However, the trails were only partially successful from a technological standpoint due to device and network problems. Broader findings suggest that technology has a key role to play in helping to maintain the museum as a learning space which complements that of universities as well as schools. This research informed my other work in visitor-constructed learning trails in museums, specifically in the theoretical approach to data analysis used, in the research design, and in informing ways to structure visitor experiences in museums. It resulted in a conference presentation, and more broadly informed my subsequent teaching practice.

Designing motivation or motivating design? Exploring Service Design, motivation and behavioural change

Motivation researcher Edward Deci has suggested that if we want behavioural change to be sustainable, we have to move past thinking of motivation as something that we ‘do’ to other people and see it rather as something that we as Service Designers can enable service users to ‘do’ by themselves. In this article, Fergus Bisset explores the ways in which Service Designers can create more motivating services. Dan Lockton then looks at where motivating behaviour via Service Design often starts, with the basic ‘pinball’ and ‘shortcut’ approaches. We conclude by proposing that if services are to be sustainable in the long term, we as Service Designers need to strive to accommodate humans' differing levels of motivation and encourage and support service users' sense of autonomy within the services we design.

“Digital Diagnostics and Communication (DDC) system” Redesigning the Emergency Ambulance

During the development of a new treatment space for the UK emergency ambulance participatory observations with front-line clinicians revealed the need for an integrated patient monitoring, communication and navigation system. The research identified the different information touch-points and requirements through modes of use analysis, day-in-the-life study and simulation workshops with clinicians. Emergency scenario and role-play with paramedics identified 5 distinct ambulance modes of use. Information flow diagrams were created and checked by paramedics and digital User Interface (UI) wireframes were developed and evaluated by clinicians during clinical evaluations. Feedback from clinicians defined UI design specification further leading to a final design proposal. This research was a further development from the 2007 EPSRC funded “Smart Pods” project. The resulting interactive prototype was co-designed in collaboration with ambulance crews and provides a vision of what could be achieved by integrating well-proven IT technologies and protocols into a package relevant in the emergency medicine field. The system has been reviewed by over 40 ambulance crews and is part of a newly co-designed ambulance treatment space.

Strategic Management Simulation as a Blended Learning Dimension: Campus Based Students’ Perspectives

Although business simulations are widely used in management education, there is no consensus about how to optimise their application. Our research explores the use of business simulations as a dimension of a blended learning pedagogic approach for undergraduate business education. Accepting that few best-practice prescriptive models for the design and implementation of simulations in this context have been presented, and that there is little empirical evidence for the claims made by proponents of such models, we address the lacuna by considering business student perspectives on the use of simulations. We then intersect available data with espoused positive outcomes made by the authors of a prescriptive model. We find the model to be essentially robust and offer evidence to support this position. In so doing we provide one of the few empirically based studies to support claims made by proponents of simulations in business education. The research should prove valuable for those with an academic interest in the use of simulations, either as a blended learning dimension or as a stand-alone business education activity. Further, the findings contribute to the academic debate surrounding the use and efficacy of simulation-based training [SBT] within business and management education.

Investigation of the Nucleation and Growth of Colloidal Indium Phosphide: from Molecular Precursors to Semiconductor Nanocrystals through In37P20(O2CR)51 as a Magic-Size Intermediate

Thesis (Ph.D.)--University of Washington, 2016-06

It's Not Rocket Library Science: Design Epistemology and American Librarianship

Thesis (Ph.D.)--University of Washington, 2016-06

Investigating routes toward atomic layer deposition of silicon carbide: Ab initio screening of potential silicon and carbon precursors

Silicon carbide (SiC) is a promising material for electronics due to its hardness, and ability to carry high currents and high operating temperature. SiC films are currently deposited using chemical vapor deposition (CVD) at high temperatures 1500–1600 °C. However, there is a need to deposit SiC-based films on the surface of high aspect ratio features at low temperatures. One of the most precise thin film deposition techniques on high-aspect-ratio surfaces that operates at low temperatures is atomic layer deposition (ALD). However, there are currently no known methods for ALD of SiC. Herein, the authors present a first-principles thermodynamic analysis so as to screen different precursor combinations for SiC thin films. The authors do this by calculating the Gibbs energy ΔGΔG of the reaction using density functional theory and including the effects of pressure and temperature. This theoretical model was validated for existing chemical reactions in CVD of SiC at 1000 °C. The precursors disilane (Si2H6), silane (SiH4), or monochlorosilane (SiH3Cl) with ethyne (C2H2), carbontetrachloride (CCl4), or trichloromethane (CHCl3) were predicted to be the most promising for ALD of SiC at 400 °C.

STRAINING ENGINEERING OF GRAPHENE AND GRAPHENE-BASED NANOSTRUCTURES

Graphene has emerged as an extraordinary material with its capability to accommodate an array of remarkable electronic, mechanical and chemical properties. Extra-large surface-to-volume ratio renders graphene a highly flexible morphology, giving rise to intriguing observations such as ripples, wrinkles and folds as well as the potential to transform into other novel carbon nanostructures. Ultra-thin, mechanically tough, electrically conductive graphene films promise to enable a wealth of possible applications ranging from hydrogen storage scaffolds, electronic transistors, to bottom-up material designs. Enthusiasm for graphene-based applications aside, there are still significant challenges to their realization, largely due to the difficulty of precisely controlling the graphene properties. Controlling the graphene morphology over large areas is crucial in enabling future graphene-based applications and material design. This dissertation aims to shed lights on potential mechanisms to actively manipulate the graphene morphology and properties and therefore enable the material design principle that delivers desirable mechanical and electronic functionalities of graphene and its derivatives.

Navigating a corpus of journal papers using Handles

For some years now the Internet and World Wide Web communities have envisaged moving to a next generation of Web technologies by promoting a globally unique, and persistent, identifier for identifying and locating many forms of published objects . These identifiers are called Universal Resource Names (URNs) and they hold out the prospect of being able to refer to an object by what it is (signified by its URN), rather than by where it is (the current URL technology). One early implementation of URN ideas is the Unicode-based Handle technology, developed at CNRI in Reston Virginia. The Digital Object Identifier (DOI) is a specific URN naming convention proposed just over 5 years ago and is now administered by the International DOI organisation, founded by a consortium of publishers and based in Washington DC. The DOI is being promoted for managing electronic content and for intellectual rights management of it, either using the published work itself, or, increasingly via metadata descriptors for the work in question. This paper describes the use of the CNRI handle parser to navigate a corpus of papers for the Electronic Publishing journal. These papers are in PDF format and based on our server in Nottingham. For each paper in the corpus a metadata descriptor is prepared for every citation appearing in the References section. The important factor is that the underlying handle is resolved locally in the first instance. In some cases (e.g. cross-citations within the corpus itself and links to known resources elsewhere) the handle can be handed over to CNRI for further resolution. This work shows the encouraging prospect of being able to use persistent URNs not only for intellectual property negotiations but also for search and discovery. In the test domain of this experiment every single resource, referred to within a given paper, can be resolved, at least to the level of metadata about the referred object. If the Web were to become more fully URN aware then a vast directed graph of linked resources could be accessed, via persistent names. Moreover, if these names delivered embedded metadata when resolved, the way would be open for a new generation of vastly more accurate and intelligent Web search engines.

Dynamic Link Inclusion in Online PDF Journals

Two complementary de facto standards for the publication of electronic documents are HTML on theWorldWideWeb and Adobe s PDF (Portable Document Format) language for use with Acrobat viewers. Both these formats provide support for hypertext features to be embedded within documents. We present a method, which allows links and other hypertext material to be kept in an abstract form in separate link databases. The links can then be interpreted or compiled at any stage and applied, in the correct format to some specific representation such as HTML or PDF. This approach is of great value in keeping hyperlinks relevant, up-to-date and in a form which is independent of the finally delivered electronic document format. Four models are discussed for allowing publishers to insert links into documents at a late stage. The techniques discussed have been implemented using a combination of Acrobat plug-ins, Web servers and Web browsers.

Separate compilation of structured documents

This paper draws a parallel between document preparation and the traditional processes of compilation and link editing for computer programs. A block-based document model is described which allows for separate compilation of various portions of a document. These portions are brought together and merged by a linker program, called dlink, whose pilot implementation is based on ditroff and on its underlying intermediate code. In the light of experiences with dlink the requirements for a universal object-module language for documents are discussed. These requirements often resemble the characteristics of the intermediate codes used by programming-language compilers but with interesting extra constraints which arise from the way documents are executed .

Coupling of magnetic, strain and electric polarization fields in the structure of multiferroic material

The comprehensive study on the coupling of magnetism, electrical polarization and the crystalline lattice with the off-stoichiometric effects in self-doped multiferroic hexagonal h-LuMnxO3±δ (0.92≤x≤1.12) ceramic oxides was carried out for the PhD work. There is a complex coupling of the three ferroic degrees. The cancelation of the magnetic moments of ions in the antiferromagnetic order, electric polarization with specific vortex/antivortex topology and lattice properties have pushed researchers to find out ways to disclose the underlying physics and chemistry of magneto-electric and magneto-elastic couplings of h-RMnO3 multiferroic materials. In this research work, self-doping of Lu-sites or Mn-sites of h-LuMnxO3±δ ceramics prepared via solid state route was done to pave a way for deeper understanding of the antiferromagnetic transition, the weak ferromagnetism often reported in the same crystalline lattices and the ferroelectric properties coupled to the imposed lattice changes. Accordingly to the aim of the PhD thesis, the objectives set for the sintering study in the first chapter on experimental results were two. First, study of sintering off-stoichiometric samples within conditions reported in the bibliography and also extracted from the phase diagrams of the LuMnxO3±δ, with a multiple firings ending with a last high temperature step at 1300ºC for 24 hours. Second, explore longer annealing times of up to 240 hours at the fixed temperature of 1300 ºC in a search for improving the properties of the solid solution under study. All series of LuMnxO3±δ ceramics for each annealing time were characterized to tentatively build a framework enabling comparison of measured properties with results of others available in literature. XRD and Rietveld refinement of data give the evolution the lattice parameters as a function to x. Shrinkage of the lattice parameters with increasing x values was observed, the stability limit of the solid solution being determined by analysis of lattice parameters. The evolution of grain size and presence of secondary phases have been investigated by means of TEM, SEM, EDS and EBSD techniques. The dependencies of grain growth and regression of secondary phases on composition x and time were further characterized. Magnetic susceptibility of samples and magnetic irreversibility were extensively examined in the present work. The dependency of magnetic susceptibility, Neel ordering transition and important magnetic parameters are determined and compared to observation in other multiferroics in the following chapter of the thesis. As a tool of high sensitivity to detect minor traces of the secondary phase hausmannite, magnetic measurements are suggested for cross-checking of phase diagrams. Difficulty of previous studies on interpreting the magnetic anomaly below 43 K in h-RMnO3 oxides was discussed and assigned to the Mn3O4 phase, with supported of the electron microscopy. Magneto-electric coupling where AFM ordering is coupled to dielectric polarization is investigated as a function of x and of sintering condition via frequency and temperature dependent complex dielectric constant measurements in the final chapter of the thesis. Within the limits of solid solubility, the crystalline lattice of off-stoichiometric ceramics was shown to preserve the magneto-electric coupling at TN. It represents the first research work on magneto-electric coupling modified by vacancy doping to author’s knowledge. Studied lattices would reveal distortions at the atomic scale imposed by local changes of x dependent on sintering conditions which were widely inspected by using TEM/STEM methods, complemented with EDS and EELS spectroscopy all together to provide comprehensive information on cross coupling of distortions, inhomogeneity and electronic structure assembled and discussed in a specific chapter. Internal interfaces inside crystalline grains were examined. Qualitative explanations of the measured magnetic and ferroelectric properties were established in relation to observed nanoscale features of h-LuMnxO3±δ ceramics. Ferroelectric domains and topological defects are displayed both in TEM and AFM/PFM images, the later technique being used to look at size, distribution and switching of ferroelectric domains influenced by vacancy doping at the micron scale bridging to complementary TEM studies on the atomic structure of ferroelectric domains. In support to experimental study, DFT simulations using Wien2K code have been carried out in order to interpret the results of EELS spectra of O K-edge and to obtain information on the cation hybridization to oxygen ions. The L3,2 edges of Mn is used to access the oxidation state of the Mn ions inside crystalline grains. In addition, rehybridization driven ferroelectricity is also evaluated by comparing the partial density of states of the orbitals of all ions of the samples, also the polarization was calculated and correlated to the off-stoichiometric effect.