Profitability of a sample of Portuguese bank branches and its decomposition into technical and allocative components

The efficiency literature, both using parametric and non-parametric methods, has been focusing mainly on cost efficiency analysis rather than on profit efficiency. In for-profit organisations, however, the measurement of profit efficiency and its decomposition into technical and allocative efficiency is particularly relevant. In this paper a newly developed method is used to measure profit efficiency and to identify the sources of any shortfall in profitability (technical and/or allocative inefficiency). The method is applied to a set of Portuguese bank branches first assuming long run and then a short run profit maximisation objective. In the long run most of the scope for profit improvement of bank branches is by becoming more allocatively efficient. In the short run most of profit gain can be realised through higher technical efficiency. © 2003 Elsevier B.V. All rights reserved.

Externality effects of information and communication technologies across country Borders

As information and communications technology (ICT) involves both traditional capital and knowledge capital, potential spillovers through various mechanisms can occur. We posit that ICT capital may boost productivity growth, not only in the home country, but also in other countries. In this paper, we provide empirical evidence of such spillovers using panel data on 37 countries from 1996 to 2004. Our results support the existence of ICT spillovers across country borders. Furthermore, we find that developing countries could reap more benefits from ICT spillovers than developed countries. This is particularly important for policy decisions regarding national trade liberalization and economic integration. Developing economies that are more open to foreign trade may have an economic advantage and may develop knowledge-intensive activities, which will lead to economic development in the long run.

An econometric analysis of international tourism demand in Hong Kong : a cointegration and error correction approach

The purpose of this study is to develop econometric models to better understand the economic factors affecting inbound tourist flows from each of six origin countries that contribute to Hong Kong’s international tourism demand. To this end, we test alternative cointegration and error correction approaches to examine the economic determinants of tourist flows to Hong Kong, and to produce accurate econometric forecasts of inbound tourism demand. Our empirical findings show that permanent income is the most significant determinant of tourism demand in all models. The variables of own price, weighted substitute prices, trade volume, the share price index (as an indicator of changes in wealth in origin countries), and a dummy variable representing the Beijing incident (1989) are also found to be important determinants for some origin countries. The average long-run income and own price elasticity was measured at 2.66 and – 1.02, respectively. It was hypothesised that permanent income is a better explanatory variable of long-haul tourism demand than current income. A novel approach (grid search process) has been used to empirically derive the weights to be attached to the lagged income variable for estimating permanent income. The results indicate that permanent income, estimated with empirically determined relatively small weighting factors, was capable of producing better results than the current income variable in explaining long-haul tourism demand. This finding suggests that the use of current income in previous empirical tourism demand studies may have produced inaccurate results. The share price index, as a measure of wealth, was also found to be significant in two models. Studies of tourism demand rarely include wealth as an explanatory forecasting long-haul tourism demand. However, finding a satisfactory proxy for wealth common to different countries is problematic. This study indicates with the ECM (Error Correction Models) based on the Engle-Granger (1987) approach produce more accurate forecasts than ECM based on Pesaran and Shin (1998) and Johansen (1988, 1991, 1995) approaches for all of the long-haul markets and Japan. Overall, ECM produce better forecasts than the OLS, ARIMA and NAÏVE models, indicating the superiority of the application of a cointegration approach for tourism demand forecasting. The results show that permanent income is the most important explanatory variable for tourism demand from all countries but there are substantial variations between countries with the long-run elasticity ranging between 1.1 for the U.S. and 5.3 for U.K. Price is the next most important variable with the long-run elasticities ranging between -0.8 for Japan and -1.3 for Germany and short-run elasticities ranging between – 0.14 for Germany and -0.7 for Taiwan. The fastest growing market is Mainland China. The findings have implications for policies and strategies on investment, marketing promotion and pricing.

Manufacturing organisation in developing countries with particular reference to Iraq

Industrially developed countries are able to absorb modern techniques of science and technology quite readily; this is not the case for less-developed countries. Attempts made by developing countries have been ineffective due to factors not readily admitted. This thesis highlights the areas that need to be developed by under-developed countries, and covers economic, scientific and technological, and social aspects as well as technology transfer. Economic areas considered acknowledge that within any one country there should be proper procedures for planning economic and industrial projects (plant design) supported by efficient economic development strategy. Scientific and technological factors considered include the major areas that need to be developed in order to produce and/or deal with scientific and technological issues for the interest of the national development. Technology transfer areas considered include the necessity of building up a national body (system) responsible for dealing with activities and tasks of transferring foreign-made technology so that it can be employed effectively within the environment of the country. Social factors considered include the need to develop human resources which can be employed efficiently into the whole process of development, and particularly for the above proposed systems. Education and training are the major elements that ought to be tackled to produce skilled manpower and to overcome the social and cultural values and traditions that are inherited by the society. This thesis highlights the above areas in an attempt to plan and organise the development of science and technology, and their implementation into the development as a whole. Whilst recognising the problems of creating this sort of development in developing countries, the author considers the benefits to be obtained are much greater in the long run.

Public sector investment appraisal:the place of flexibility in the decision making process

This thesis reviews the main methodological developments in public sector investment appraisal and finds growing evidence that appraisal techniques are not fulfilling their earlier promise. It is suggested that an important reason for this failure lies in the inability of these techniques to handle uncertainty except in a highly circumscribed fashion. It is argued that a more fruitful approach is to strive for flexibility. Investment projects should be formulated with a view to making them responsive to a wide range of possible future events, rather than embodying a solution which is optimal for one configuration of circumstances only. The distinction drawn in economics between the short and the long run is used to examine the nature of flexibility. The concept of long run flexibility is applied to the pre-investment range of choice open to the decisionmaker. It is demonstrated that flexibility is reduced at a very early stage of decisionmaking by the conventional system of appraisal which evaluates only a small number of options. The pre-appraisal filtering process is considered further in relation to decisionmaking models. It is argued that for public sector projects the narrowing down of options is best understood in relation to an amended mixed scanning model which places importance on the process by which the 'national interest ' is determined. Short run flexibility deals with operational characteristics, the degree to which particular projects may respond to changing demands when the basic investment is already in place. The tension between flexibility and cost is noted. A short case study on the choice of electricity generating plant is presented. The thesis concludes with a brief examination of the approaches used by successive British governments to public sector investment, particularly in relation to the nationalised industries

Modeling foreign exchange rate pass-through using the exponential GARCH

In this chapter, the authors use an EGARCH-ECM to estimate the pass-through effects of Foreign Exchange (FX) rate changes and changes in producers' prices for 20 U.K. export sectors. The long-run adjustments of export prices to FX rate changes and changes in producers' prices are within the range of -1.02% (for the Textiles sector) and -17.22% (for the Meat sector). The contemporaneous Pricing-To-Market (PTM) coefficients are within the range of -72.84% (for the Fuels sector) and -8.05% (for the Textiles sector). Short-run FX rate pass-through is not complete even after several months. Rolling EGARCH-ECMs show that the short and long-run effects of changes in FX rate and producers' prices vary substantially, as do asymmetry and volatility estimates before equilibrium is achieved.

Is a little sunshine all we need? On the impact of sunshine regulation on profits, productivity and prices in the Dutch drinking water sector

This paper analyzes the performance of Dutch drinking water utilities before and after the introduction of sunshine regulation, which involves publication of the performance of utilities but no formal price regulation. By decomposing profit change into its economic drivers, our results suggest that, in the Dutch political and institutional context, sunshine regulation was effective in improving the productivity of publicly organised services. Nevertheless, while sunshine regulation did bring about a moderate reduction in water prices, sustained and substantial economic profits suggest that it may not have the potential to fully align output prices with economic costs in the long run. In methodological terms, the DEA based profit decomposition is extended to robust and conditional non-parametric efficiency measures, so as to account better for both uncertainty and differences in operating environment between utilities.

Strategies for sustaining manufacturing competitiveness:case studies of Australian firms

This study investigates the strategies adopted by Australian manufacturing firms to sustain their local production and competitiveness, including during the period of the recent global financial crisis. Six Australian manufacturing organisations in different sectors were selected and analysed using the market-based and resource-based views, and components of the DRAMA framework. The findings highlight several factors and company efforts to sustain manufacturing operations. These organisations pursued a range of manufacturing strategies to enable distinctive offerings in the marketplace and used various ways to differentiate themselves. This was possible through the portfolio of capabilities that determine their continued production and business performance over the period. This study provides important lessons for managers in manufacturing organisations and demonstrates how differing capabilities and strategies of firms can impact the competitiveness of local production, not only in times of economic crisis but also in the long run to sustainable competitiveness in the future.

Bid-ask spread dynamics in foreign exchange markets

The aim of this paper is to examine the short term dynamics of foreign exchange rate spreads. Using a vector autoregressive model (VAR) we show that most of the variation in the spread comes from the long run dependencies between past and future spreads rather than being caused by changes in inventory, adverse selection, cost of carry or order processing costs. We apply the Integrated Cumulative Sum of Squares (ICSS) algorithm of Inclan and Tiao (1994) to discover how often spread volatility changes. We find that spread volatility shifts are relatively uncommon and shifts in one currency spread tend not to spillover to other currency spreads. © 2013.

Pricing-to-market using EGARCH-error correction model

In this paper, the authors use an exponential generalized autoregressive conditional heteroscedastic (EGARCH) error-correction model (ECM), that is, EGARCH-ECM, to estimate the pass-through effects of foreign exchange (FX) rates and producers’ prices for 20 U.K. export sectors. The long-run adjustment of export prices to FX rates and producers’ prices is within the range of -1.02% (for the Textiles sector) and -17.22% (for the Meat sector). The contemporaneous pricing-to-market (PTM) coefficient is within the range of -72.84% (for the Fuels sector) and -8.05% (for the Textiles sector). Short-run FX rate pass-through is not complete even after several months. Rolling EGARCH-ECMs show that the short and long-run effects of FX rate and producers’ prices fluctuate substantially as are asymmetry and volatility estimates before equilibrium is achieved.

New York mark-ups on petroleum products

In this paper we analyse rigidities in the behaviour of the mark-up on regular, midgrade and premium varieties of petrol in the New York area using a set of weekly frequency data and a methodology that analyses the pricing process using deterministic and stochastic techniques. The results are consistent across methodologies and indicate that the speeds of adjustment to the long-run equilibrium mark-up differ across varieties of petrol with margins of the premium variety falling faster than they rise, contrary to the popular claim of welfare-decreasing asymmetries in price transmission. © 2012 The Authors. The Manchester School © 2012 Blackwell Publishing Ltd and The University of Manchester.

The side effects of quantitative easing:evidence from the UK bond market

We examine the returns to UK government bonds before, during and between the phases of quantitative easing to identify the side effects for the market itself. We show that the onset of QE led to a sustained reduction in the costs of trading and removed some return regularities. However, controlling for a wide range of market activity, including issuance and QE announcements, we find evidence that investors could have earned excess returns after costs by trading in response to the purchase auction calendar. Drawing on economic theory, we explore the implications of these findings for both the efficiency of the market and the costs of government debt management in both the short and long run.

A Cauchy Integral Related to a Robot-safety Device System

We introduce a robot-safety device system attended by two different repairmen. The twin system is characterized by the natural feature of cold standby and by an admissible “risky” state. In order to analyse the random behaviour of the entire system (robot, safety device, repair facility) we employ a stochastic process endowed with probability measures satisfying general Hokstad-type differential equations. The solution procedure is based on the theory of sectionally holomorphic functions, characterized by a Cauchy-type integral defined as a Cauchy principal value in double sense. An application of the Sokhotski-Plemelj formulae determines the long-run availability of the robot-safety device. Finally, we consider the particular but important case of deterministic repair.

Adjusting WSMO API Reference Implementation to Support More Reliable Entity Persistence

* The research has been partially supported by INFRAWEBS - IST FP62003/IST/2.3.2.3 Research Project No. 511723 and “Technologies of the Information Society for Knowledge Processing and Management” - IIT-BAS Research Project No. 010061.

Strategic supplier performance evaluation:a case-based action research of a UK manufacturing organisation

The main aim of this research is to demonstrate strategic supplier performance evaluation of a UK-based manufacturing organisation using an integrated analytical framework. Developing long term relationship with strategic suppliers is common in today's industry. However, monitoring suppliers' performance all through the contractual period is important in order to ensure overall supply chain performance. Therefore, client organisations need to measure suppliers' performance dynamically and inform them on improvement measures. Although there are many studies introducing innovative supplier performance evaluation frameworks and empirical researches on identifying criteria for supplier evaluation, little has been reported on detailed application of strategic supplier performance evaluation and its implication on overall performance of organisation. Additionally, majority of the prior studies emphasise on lagging factors (quality, delivery schedule and value/cost) for supplier selection and evaluation. This research proposes both leading (organisational practices, risk management, environmental and social practices) and lagging factors for supplier evaluation and demonstrates a systematic method for identifying those factors with the involvement of relevant stakeholders and process mapping. The contribution of this article is a real-life case-based action research utilising an integrated analytical model that combines quality function deployment and the analytic hierarchy process method for suppliers' performance evaluation. The effectiveness of the method has been demonstrated through number of validations (e.g. focus group, business results, and statistical analysis). Additionally, the study reveals that enhanced supplier performance results positive impact on operational and business performance of client organisation.