945 resultados para LM-tietopalvelut
Resumo:
Pós-graduação em Cirurgia Veterinária - FCAV
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
In two experiments, the duration of the effect of caffeine (CAF) solutions on larval mortality (LM) of Aedes aegypti was analyzed. In the first, LM was studied using solutions at 0.2, 0.5, 1.0 and 2.0 mg/mL aged from zero to five days in artificial breeding sites exposed to the laboratory environment (LE). In the second, the solutions aged at 1.0, 2.0 and 2.5 mg/mL closed flasks were stored in LE or in the refrigerator (R), and the effect on LM was tested in the experimental breeding sites at 30 days interval. In the first, the duration of the effect increased with the solution age in each CAF concentration. CAF at 1.0 and 2.0 mg/mL, without addition of food, produced 100% LM until 25 days after preparation; with food, at 11 and 18 days, respectively. In the second the effectiveness of CAF solutions lasted up to the seventh month, irrespective of whether they were stored in R or in LE. No adult emerged at any of the CAF concentrations used in second experiment.
Resumo:
This study aimed to assess antioxidant effects of melatonintreatment compared to N-acetylcysteine (NAC) and to their combination in asickle cell suspension. Sickle erythrocytes were suspended in phosphate-buffered saline, pH 7.4, composing external control group. They were alsosuspended and incubated at 37°C either in the absence (experimental controlgroup) or in the presence of NAC, melatonin and their combination atconcentrations of 100 pM, 100 nM and 100 lM for 1 hr (treatment groups).The melatonin influences were evaluated by spectrophotometric [hemolysisdegree, catalase (CAT), glutathione S-transferase (GST), glutathioneperoxidase (GPx), glutathione reductase (GR), glucose-6-phosphatedehydrogenase (G6PDH), and superoxide dismutase (SOD) activities] andchromatographic methods [glutathione (GSH) and malondialdehyde (MDA)levels]. Incubation period was able to cause a rise about 64% on hemolysisdegree as well as practically doubled the lipid peroxidation levels (P < 0.01).However, almost all antioxidants tested treatments neutralized this incubationeffect observed in MDA levels. Among the antioxidant biomarkers evaluated,we observed a modulating effect of combined treatment on GPx and SODactivities (P < 0.01), which showed ~25% decrease in their activities. Inaddition, we found an antioxidant dose-dependent effect for melatonin onlipid peroxidation (r = 0.29; P = 0.03) and for combined antioxidanttreatments also on MDA levels (r = 0.37; P = 0.01) and on SOD activity(r = 0.54; P < 0.01). Hence, these findings contribute with important insightthat melatonin individually or in combination with NAC may be useful forsickle cell anemia management.
Resumo:
To the companies maintain competitive in the market, they need continuous improvement in quality and productivity. This continuous improvement can be achieved through lean manufacturing tools. The idea of lean manufacturing is to map the flow to identify the processes that don’t add value in the final product, according the customer specification, in others words is eliminate or reduce the waste on the production flow. However the implementation of lean manufacturing is not so simple and involves the resistance of the employees, lack of training and the lack of knowledge to make the implementation. The objective of this study is determinate the good practices and difficulties found by a multinational company in the field of healthy that aims implementing the Lean Manufaturing through an internal certification. The methodology used to approach the problem is a case of study that analyzes the information introduced through discussion made by a semi structured interview. The case study describes the steps to get the certification, involving the concepts of 5S, balancing, standardization and routine management. The literature and the study case showed that the good practices, such as productivity increases, safety level increases and the machine stability were accomplished, but the majority difficulties was found in cultural factors and planning. Some recommendations were proposed to the others companies, such as the elaboration of a qualification matrix and the review of the activities chronogram during the implementation. The way that the company found to implement Lean Manufacturing concepts was a creative method to show to everybody the objective and the target to be accomplished and is one way to recognize the effort through the certification
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The world we have been living in has adopted competition as the way for surviving in it, especially due to the capitalism and consumer habits. In this research speaking English is considered one of these differentiations, i.e., distinguishing individuals a unique people. In addition, it is expected that by using this language, among other things, people could have access to: education, a better job and a higher quality of life. However, the process of learning a foreign language is very complex caused by many features that are involved in it, e.g. the impossibility to dissociate language, culture and society. Moreover, it was contemplated if from this language learning, it would be possible to build social and ideological relations as well as personal identities. The most applicable conclusion of this research is the requisite of making students aware of the process for an effective foreign language learning. As a consequence, the context and social, cultural, and ideological characteristics that are part of the mother tongue society must be taken into consideration in the same way as the foreign language society.
Resumo:
Pós-graduação em Odontologia Restauradora - ICT
Resumo:
Pós-graduação em Biopatologia Bucal - ICT
Resumo:
On heat cured acrylic resins by microwaves energy the action of electromagnetic waves on methylmethacrylate promote the polymerization process. However, part of this energy is absorbed by the gypsum present in the flask and the function of this gypsum is to maintain the characteristics of specimen, nevertheless is unknown in the literature as the amount of water present in this gypsum affects the characteristics of acrylic resin. The proposal of this study was verified if dried gypsum influenced in some properties of the acrylic resins thermally activated by microwaves: presence of porosity, microhardness, roughness, flexural strength and dimensional change. Two different types of acrylic resin for complete denture were utilized: Lucitone 550 e Vipi-Wave and groups were formed: Lucitone 550, polymerization by microwave energy without gypsum treatment; Lucitone 550, polymerization by microwave energy with pretreatment gypsum; Vipi-Wave by microwave energy without gypsum treatment; Vipi Wave, polymerization by microwave energy with pretreatment gypsum; Lucitone 550 control group polymerization in hot water bath. For both situations were performed analysis of microhardness and porosity three different metallic shaped specimens were formed with followed dimensions: 2,0x2,0x2,0cm (8cm3); 2,0x2,0x1,0 (4cm3) e 2,0x2,0x0,5 (2cm3). Standardized wax specimens was used to prepare groups (n=9) and included in glass fiber flasks. The gypsum dry was made by microwave oven cycle (10min and 600W) and then the flasks were maintained in dry oven during two hours. Polymerizations of specimens were made and then polished. Wax patterns #7 obtained from the metal were embedded in plastic flask and following the processes of pressing and polymerization of the resin according to established groups. To evaluate the flexural strength, specimens 65mm x 10mm x 3.0mm from metallic patterns in bar format were made. ...
Resumo:
Exercise physiology has attempted to reproduce the experimental exercise in the laboratory using mainly rats. The swimming exercise has emerged as one of the leading research in these type ergometers. Thus, this research consisted of a literature review addressing the key issues which involve the exercise of swimming in the model rats. Training of aerobic and anaerobic swimming, evaluation models and models of periodization were the topics suggested in this research. In several studies, models of aerobic and anaerobic training have been proposed with the aim of studying their effect on normal and abnormal physiological parameters. However, earlier studies lacked methods of analysis aiming to determine the exercise intensity in the animal model. For this reason, in the last decade, assessment models have been adapted for humans to animals, especially rats. The maximal lactate steady state (MLSS) and lactate minimum (LM) are among the various techniques used to measure the amount of effort produced by swimming exercise in rats. Thereafter, based on biochemical parameters such as lactate, swimming exercise in rats has become the highest-rated, ie, using as reference the anaerobic threshold (AT). In another aspect, an entirely new line of research has tried to understand and promising swimming training in a periodized and its effects on some biochemical parameters. But this is an area little researched so far. Thus, the experimental model of swimming has proved an important resource of exercise physiology. From this model, it becomes possible to study the exercise, especially swimming, in more accurate, based on invasive and incisive analysis of the rat
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Developmental Morphology of a Dimorphic Grass Inflorescence: The Brazilian Bamboo Eremitis (Poaceae)
Resumo:
Premise of research.The highly specialized grass inflorescence varies with respect to phyllotaxis, with the reproductive meristem forming primary lateral branches that are either spirally arranged or distichous. The Brazilian bamboo Eremitis is highly unusual in that it has a dimorphic inflorescence, typically composed of an apical gynecandrous whorl of both male and female spikelets and basal whorls of male spikelets. Although not closely related to them, Eremitis shares some structural similarities with some early-divergent grasses.Methodology.We use SEM and LM to describe the development of the reproductive structures of Eremitis to clarify our understanding of the highly specialized grass inflorescence and flower.Pivotal results.Developmental studies show that the inflorescence of Eremitis is actually partially whorled and partially distichous. The apical whorl is abortive. The female spikelet is not terminal on the axis, in contrast with the majority of grasses. All the male spikelets are distichously attached to the inflorescence axis and separated into groups. There is a hollow style with two vascular bundles.Conclusions.The strong morphological similarities between Eremitis and some early-divergent grasses are here supplemented by several anatomical similarities, perhaps due to a shared pollination syndrome.