Highly efficient diode side-pumped Nd : YAG ceramic laser with 210W output power

We developed a highly efficient diode side-pumped Nd:YAG ceramic laser with a diffusive reflector as an optical pump cavity. A maximum output power of 211.6W was obtained with an optical -to- optical conversion efficiency of 48.7%. This corresponds to the highest conversion efficiency in the side-pumped ceramic rod. Thermal effects of the Nd:YAG ceramic rod were analyzed in detail through the measurements of laser output powers and beam profiles near the critically unstable region. A M-2 beam quality factor of 18.7 was obtained at the maximum laser output power. (c) 2006 Elsevier Ltd. All rights reserved.

Reciclado de polvo inconel 718 y evolución de las propiedades de los componentes fabricados con los mismos.

[ES]El objetivo de este trabajo ha sido la determinación de un proceso para la reutilización del polvo metálico desperdiciado durante el proceso de aporte por láser. El polvo necesita ser inyectado para ser fundido directamente sobre el aporte pero un alto porcentaje de las partículas golpean el área no fundida y directamente rebotan fuera de la zona de aporte. La eficiencia de las partículas depositadas puede bajar hasta el 40 % dependiendo de la configuración y del tamaño del punto de aporte. El material utilizado ha sido la superaleación de níquel Inconel 718 debido a su potencial aplicación en procesos de fabricación aditiva. Después del primer uso, el polvo es recolectado y tamizado. La fracción indeseada es magnéticamente segregada y la parte limpia es nuevamente tamizada para obtener datos y de nuevo mezclada para estar lista para la reutilización. No ha sido añadido polvo nuevo a la fracción recuperada y este procedimiento ha sido repetido 5 veces. Los test experimentales muestran que el material depositado presenta resultados similares a aquellos obtenidos con polvo nuevo. La implementación de este proceso permite la mejora de la eficiencia final reduciendo tanto costes como residuos materiales.

Pata contractions and coupled type fixed points

A new coupled fixed point theorem related to the Pata contraction for mappings having the mixed monotone property in partially ordered complete metric spaces is established. It is shown that the coupled fixed point can be unique under some extra suitable conditions involving mid point lower or upper bound properties. Also the corresponding convergence rate is estimated when the iterates of our function converge to its coupled fixed point.

Effect of La3+ on microwave dielectric properties of (Pb0.45Ca0.55) (Fe0.5Nb0.5)O-3 ceramics

In this work, microwave dielectric properties of A-site substitution by La3+ in (Pb0.45Ca0.55) (Fe0.5Nb0.5) 03 system were investigated. Microwave dielectric properties of A-site charge unbalance substitution of [(Pb0.45Ca0.55)(1-x) La-x] (Fe0.5Nb0.5)O-3(+) (P45CLFN) were improved because the solid solution of small amount of surplus La3+ with (Pb, Ca)(2+) could eliminate oxygen vacancies, and the formation of secondary phase (pyrochlore) was also caused by surplus La3+. The decreasing of dielectric constant with the increase of La3+ content is due to the formation of pyrochlore. The grain size is changed slightly and Q(f) values (7000 similar to 7300 GHz) are almost unchanged at x = 0.02 similar to 0.10, but the temperature coefficient of resonant frequency (TCF) are increased and changed from negative to positive. TCF is zero at x 0.075 with Q(f) = 7267 GHz and K = 89. TCF of all specimens are within +/- 5 x 10(-6)degrees C-1.