Life Cycle Assessment comparativo tra il processo di co-digestione della frazione organica dei rifiuti solidi urbani e dei fanghi di depurazione disidratati e il sistema di gestione attuale. Il caso di Bagnacavallo (RA)

Waste management is becoming, year after year, always more important both for the costs associated with it and for the ever increasing volumes of waste generated. The discussion on the fate of organic fraction of municipal solid waste (OFMSW) leads everyday to new solutions. Many alternatives are proposed, ranging from incineration to composting passing through anaerobic digestion. ���For Biogas��� is a collaborative effort, between C.I.R.S.A. and R.E.S. cooperative, whose main goal is to generate ���green��� energy from both biowaste and sludge anaerobic co-digestion. Specifically, the project include a pilot plant receiving dewatered sludge from both urban and agro-industrial sewage (DS) and the organic fraction of MSW (in 2/1 ratio) which is digested in absence of oxygen to produce biogas and digestate. Biogas is piped to a co-generation system producing power and heat reused in the digestion process itself, making it independent from the national grid. Digestate undergoes a process of mechanical separation giving a liquid fraction, introduced in the treatment plant, and a solid fraction disposed in landfill (in future it will be further processed to obtain compost). This work analyzed and estimated the impacts generated by the pilot plant in its operative phase. Once the model was been characterized, on the basis of the CML2001 methodology, a comparison is made with the present scenario assumed for OFMSW and DS. Actual scenario treats separately the two fractions: the organic one is sent to a composting plant, while sludge is sent to landfill. Results show that the most significant difference between the two scenarios is in the GWP category as the project "For Biogas" is able to generate ���zero emission��� power and heat. It also generates a smaller volume of waste for disposal. In conclusion, the analysis evaluated the performance of two alternative methods of management of OFMSW and DS, highlighting that "For Biogas" project is to be preferred to the actual scenario.

Burnout and work engagement among teachers: an application of the job demands-resources model

The present dissertation focuses on burnout and work engagement among teachers, with especial focus on the Job-Demands Resources Model: Chapter 1 focuses on teacher burnout. It aims to investigate the role of efficacy beliefs using negatively worded inefficacy items instead of positive ones and to establish whether depersonalization and cynism can be considered two different dimensions of the teacher burnout syndrome. Chapter 2 investigates the factorial validity of the instruments used to measure work engagement (i.e. Utrecht Work Engagement Scale, UWES-17 and UWES-9). Moreover, because the current study is partly longitudinal in nature, also the stability across time of engagement can be investigated. Finally, based on cluster-analyses, two groups that differ in levels of engagement are compared as far as their job- and personal resources (i.e. possibilities for personal development, work-life balance, and self-efficacy), positive organizational attitudes and behaviours (i.e., job satisfaction and organizational citizenship behaviour) and perceived health are concerned. Chapter 3 tests the JD-R model in a longitudinal way, by integrating also the role of personal resources (i.e. self-efficacy). This chapter seeks answers to questions on what are the most important job demands, job and personal resources contributing to discriminate burned-out teachers from non-burned-out teachers, as well as engaged teachers from non-engaged teachers. Chapter 4 uses a diary study to extend knowledge about the dynamic nature of the JD-R model by considering between- and within-person variations with regard to both motivational and health impairment processes.

The secondary market for life insurance policies in the United States market evolution and product valuation

In this work we discuss the secondary market for life insurance policies in the United States of America. First, we give an overview of the life settlement market: how it came into existence, its growth prospects and the ethical issues it arises. Secondly, we discuss the characteristics of the different life insurance products present in the market and describe how life settlements are originated. Life settlement transactions tend to be long and complex transactions that require the involvement of a number of parties. Also, a direct investment into life insurance policies is fraught with a number of practical issues and entails risks that are not directly related to longevity. This may reduce the efficiency of a direct investment in physical policies. For these reasons, a synthetic longevity market has evolved. The number of parties involved in a synthetic longevity transaction is typically smaller and the broker-dealer transferring the longevity exposure will be retaining most or all of the risks a physical investment entails. Finally, we describe the main methods used in the market to evaluate life settlement investments and the role of life expectancy providers.

Multiscale fabrication of functional materials for life sciences

Regenerative medicine claims for a better understanding of the cause-effect relation between cell behaviour and environment signals. The latter encompasses topographical, chemical and mechanical stimuli, electromagnetic fields, gradients of chemo-attractants and haptotaxis. In this perspective, a spatial control of the structures composing the environment is required. In this thesis I describe a novel approach for the multiscale patterning of biocompatible functional materials in order to provide systems able to accurately control cell adhesion and proliferation. The behaviour of different neural cell lines in response to several stimuli, specifically chemical, topographical and electrical gradients is presented. For each of the three kind of signals, I chose properly tailored materials and fabrication and characterization techniques. After a brief introduction on the state of art of nanotechnology, nanofabrication techniques and regenerative medicine in Chapter 1 and a detailed description of the main fabrication and characterization techniques employed in this work in Chapter 2, in Chapter 3 an easy route to obtain accurate control over cell proliferation close to 100% is described (chemical control). In Chapter 4 (topographical control) it is shown how the multiscale patterning of a well-established biocompatible material as titanium dioxide provides a versatile and robust method to study the effect of local topography on cell adhesion and growth. The third signal, viz. electric field, is investigated in Chapter 5 (electrical control), where the very early stages of neural cell adhesion are studied in the presence of modest steady electric fields. In Chapter 6 (appendix) a new patterning technique, called Lithographically Controlled Etching (LCE), is proposed. It is shown how LCE can provide at the same time the micro/nanostructuring and functionalization of a surface with nanosized objects, thus being suitable for applications both in regenerative medicine in biosensing.

A Multilevel Model with Time Series Components for the Analysis of Tribal Art Prices

In the present work we perform an econometric analysis of the Tribal art market. To this aim, we use a unique and original database that includes information on Tribal art market auctions worldwide from 1998 to 2011. In Literature, art prices are modelled through the hedonic regression model, a classic fixed-effect model. The main drawback of the hedonic approach is the large number of parameters, since, in general, art data include many categorical variables. In this work, we propose a multilevel model for the analysis of Tribal art prices that takes into account the influence of time on artwork prices. In fact, it is natural to assume that time exerts an influence over the price dynamics in various ways. Nevertheless, since the set of objects change at every auction date, we do not have repeated measurements of the same items over time. Hence, the dataset does not constitute a proper panel; rather, it has a two-level structure in that items, level-1 units, are grouped in time points, level-2 units. The main theoretical contribution is the extension of classical multilevel models to cope with the case described above. In particular, we introduce a model with time dependent random effects at the second level. We propose a novel specification of the model, derive the maximum likelihood estimators and implement them through the E-M algorithm. We test the finite sample properties of the estimators and the validity of the own-written R-code by means of a simulation study. Finally, we show that the new model improves considerably the fit of the Tribal art data with respect to both the hedonic regression model and the classic multilevel model.

Neuroglobin, Cytoglobin und Myoglobin in der Blindmaus Spalax ehrenbergi: Adaptation an ���unterirdische Verh��ltnisse���

Hypoxie ist ein Zustand des Sauerstoffmangels, hervorgerufen durch fehlende Verf��gbarkeit von Sauerstoff in der Umgebung eines Organismus oder durch pathologisch bedingte unzureichende Nutzbarkeit des Sauerstoffs von Geweben. Die Sensitivit��t gegen��ber Hypoxie variiert enorm im Tierreich zwischen verschiedenen Phyla und Spezies. Die meisten S��ugetiere sind nur unzureichend an niedrige Sauerstoffkonzentrationen angepasst, wohingegen einige unterirdisch lebende S��uger sehr resistent gegen Hypoxiestress sind. Um die molekulare Basis der Hypoxietoleranz zu bestimmen, wurden in der vorliegenden Arbeit Globine untersucht, die potenziell in der Lage sind, als respiratorische Proteine zur Hypoxietoleranz von Tieren beizutragen. Dazu wurde die Expression der Globine in der hypoxieresistenten, in Israel lebenden Blindmaus Spalax ehrenbergi mit der Genexpression in der hypoxiesensitiven Ratte (Rattus norvegicus) verglichen. In der vorliegenden Arbeit wurden die erst vor wenigen Jahren entdeckten Globine Neuroglobin und Cytoglobin untersucht, deren exakte physiologische Rolle noch unklar ist, und mit Daten des viel detaillierter untersuchten Myoglobins verglichen. Beim Vergleich der Expression von Cytoglobin und Neuroglobin in Spalax versus Ratte f��llt auf, dass Neuroglobin und Cytoglobin bereits unter normoxischen Bedingungen auf mRNA- und Proteinebene in der Blindmaus um einen Faktor von mindesten 2 bis 3 verst��rkt exprimiert werden. Bei Myoglobin (als dem Kontrollgen mit bekannter Funktion) konnte auf mRNA-Ebene eine noch weitaus st��rkere Expression in Spalax vs. Ratte gefunden werden. Das ��bergreifende Ph��nomen der verst��rkten Genexpression von Globinen in Spalax kann im Sinne einer Pr��adaptation an das unterirdische, h��ufig hypoxische Leben der Blindmaus interpretiert werden. Einen weiteren Hinweis auf eine besondere, spezialisierte Funktion von Neuroglobin in Spalax geben immunhistochemische Daten, die zeigen, dass Neuroglobin im Gehirn von Spalax im Gegensatz zur Ratte nicht nur in Neuronen, sondern auch in Gliazellen exprimiert wird. Dies impliziert ��nderungen des oxidativen Stoffwechsels im Nervensystem der hypoxietoleranten Spezies. Die zellul��ren Expressionsmuster von Cytoglobin erscheinen hingegen in beiden S��ugerspezies weitgehend identisch. Es wurde der Frage nachgegangen, ob und wie experimentell induzierte Hypoxie die Genexpression der Globine ver��ndert. Dabei zeigten sich f��r Neuroglobin und Cytoglobin unterschiedliche Expressionsmuster. Neuroglobin wird unter diversen Sauerstoffmangelbedingungen sowohl in der Ratte als auch in Spalax auf mRNA- und Proteinebene herunterreguliert. Ein ��hnliches Regulationsverhalten wurde auch f��r Myoglobin beobachtet. Die verminderte Expression von Neuroglobin (und evtl. auch Myoglobin) unter Hypoxie ist mit einer gezielten Verringerung der Sauerstoff-Speicherkapazit��t in Abwesenheit von O2 zu erkl��ren. Ein weiterer denkbarer Grund k��nnte auch die allgemeine Tendenz sein, unter Hypoxie aus Energiespargr��nden den Metabolismus herunter zu regulieren. Cytoglobin, das bei normalen Sauerstoffbedingungen nur im Gehirn von Spalax (nicht jedoch in Herz und Leber) ebenfalls um Faktor 2 bis 3 st��rker exprimiert wird als in der Ratte, ist mit einiger Sicherheit ebenfalls von adaptivem Nutzen f��r die Anpassung von Spalax an niedrige Sauerstoffbedingungen, wenngleich seine Funktion unklar bleibt. Unter Hypoxie wird die Cytoglobin-mRNA sowohl in Spalax als auch in der Ratte hochreguliert. Es konnte in der vorliegenden Arbeit dargelegt werden, dass die Expression von Cygb h��chstwahrscheinlich durch den Transkriptionsfaktor Hif-1 gesteuert wird, der die molekulare Hypoxieantwort vieler Tierarten zentral steuert. In der vorliegenden Arbeit wurde ebenfalls die Expression von Ngb und Cygb im Gehirn des Hausschweins (Sus scrofa) untersucht. Diese Spezies diente in der Arbeit als weiterer hypoxiesensitiver Organismus sowie als biomedizinisch relevantes Modell f��r eine Operation an S��uglingen mit angeborenen Herzkrankheiten. Die Versuche haben gezeigt, dass die Gabe bestimmter Medikamente wie dem Immunsuppressivum FK506 zu einer erh��hten Ngb-Konzentration auf mRNA-Ebene f��hren kann, was potenziell im Zusammenhang mit beobachteten protektiven Effekten der Medikamentengabe w��hrend und nach der Herzoperation steht.

Use of essential oils and biocontrol cultures for the improvement of shelf-life of fresh cut products

The demand of minimally processed fruits and vegetables has increased in the last years. However, their intrinsic characteristics may favor the growth of pathogens and spoilage microbiota. The negative effects on human health reported for some traditional chemical sanitizers have justified the search for substitutes to guarantee food safety and quality. In this work we have evaluate the potential of some essential oils and their components to improve the safety and the shelf life of Lamb���s lettuce (Valerianella locusta) and apples (Golden delicious). Moreover, the effects of selected lactic acid bacteria alone or in combination with essential oils or their components, on the shelf-life and safety as well as organoleptic properties of minimally processed products, were evaluated. Since the lack of knowledge of microbial cell targets of essential oils represent one of the most important limit to the use of these molecules at industrial level, another aim of this thesis was the study of the action mechanisms of essential oils and their components. The results obtained showed the beneficial effects of the natural antimicrobials as well as the selected lactic acid bacteria on minimally processed fruit and vegetable safety and shelf-life, without detrimental effects on the quality parameters. The beneficial effects obtained by the use of the selected biocontrol agents were further increased combining them with selected natural antimicrobials. The natural antimicrobial employed induced noticeable modifications of membrane fatty acid profiles and volatile compounds produced by microbial cells during the growth. The modification of the expression in genes involved in fatty acid biosynthesis suggesting that the cytoplasmic membrane of microbial cells is one of the major cellular target of essential oils and their components. The comprehension of microbial stress response mechanisms can contribute to the scaling up of natural antimicrobials and bio-control agents at industrial level.

Flow Field���Flow Fractionation for size analysis and characterization of nanoparticles for applications in Life Sciences

Nanotechnologies are rapidly expanding because of the opportunities that the new materials offer in many areas such as the manufacturing industry, food production, processing and preservation, and in the pharmaceutical and cosmetic industry. Size distribution of the nanoparticles determines their properties and is a fundamental parameter that needs to be monitored from the small-scale synthesis up to the bulk production and quality control of nanotech products on the market. A consequence of the increasing number of applications of nanomaterial is that the EU regulatory authorities are introducing the obligation for companies that make use of nanomaterials to acquire analytical platforms for the assessment of the size parameters of the nanomaterials. In this work, Asymmetrical Flow Field-Flow Fractionation (AF4) and Hollow Fiber F4 (HF5), hyphenated with Multiangle Light Scattering (MALS) are presented as tools for a deep functional characterization of nanoparticles. In particular, it is demonstrated the applicability of AF4-MALS for the characterization of liposomes in a wide series of mediums. Afterwards the technique is used to explore the functional features of a liposomal drug vector in terms of its biological and physical interaction with blood serum components: a comprehensive approach to understand the behavior of lipid vesicles in terms of drug release and fusion/interaction with other biological species is described, together with weaknesses and strength of the method. Afterwards the size characterization, size stability, and conjugation of azidothymidine drug molecules with a new generation of metastable drug vectors, the Metal Organic Frameworks, is discussed. Lastly, it is shown the applicability of HF5-ICP-MS for the rapid screening of samples of relevant nanorisk: rather than a deep and comprehensive characterization it this time shown a quick and smart methodology that within few steps provides qualitative information on the content of metallic nanoparticles in tattoo ink samples.

Waste management in Forl��-Cesena province: Life Cycle Assessment (LCA) of Forl�� incinerator

This work assesses the environmental impact of a municipal solid waste incinerator with energy recovery in Forl��-Cesena province (Emilia-Romagna region, Italy). The methodology used is Life Cycle Assessment (LCA). As the plant already applies the best technologies available in waste treatment, this study focuses on the fate of the residues (bottom and fly ash) produced during combustion. Nine scenarios are made, based on different ash treatment disposing/recycling techniques. The functional unit is the amount of waste incinerated in 2011. Boundaries are set from waste arrival in the plant to the disposal/recovery of the residues produced, with energy recovery. Only the operative period is considered. Software used is GaBi 4 and the LCIA method used is CML2001. The impact categories analyzed are: abiotic depletion, acidification, eutrophication, freshwater aquatic ecotoxicity, global warming, human toxicity, ozone layer depletion, photochemical oxidant formation, terrestrial ecotoxicity and primary energy demand. Most of the data are taken from Herambiente. When primary data are not available, data from Ecoinvent and GaBi databases or literature data are used. The whole incineration process is sustainable, due to the relevant avoided impact given by co-generator. As far as regards bottom ash treatment, the most influential process is the impact savings from iron recovery. Bottom ash recycling in road construction or as building material are both valid alternatives, even if the first option faces legislative limits in Italy. Regarding fly ash inertization, the adding of cement and Ferrox treatment results the most feasible alternatives. However, this inertized fly ash can maintain its hazardous nature. The only method to ensure the stability of an inertized fly ash is to couple two different stabilization treatments. Ash stabilization technologies shall improve with the same rate of the flexibility of the national legislation about incineration residues recycling.

Life cycle assessment in construction field: A life cycle cost analysis of reinforcement concrete bridge

The present work is included in the context of the assessment of sustainability in the construction field and is aimed at estimating and analyzing life cycle cost of the existing reinforced concrete bridge ���Viadotto delle Capre��� during its entire life. This was accomplished by a comprehensive data collection and results evaluation. In detail, the economic analysis of the project is performed. The work has investigated possible design alternatives for maintenance/rehabilitation and end-of-life operations, when structural, functional, economic and also environmental requirements have to be fulfilled. In detail, the economic impact of different design options for the given reinforced concrete bridge have been assessed, whereupon the most economically, structurally and environmentally efficient scenario was chosen. The Integrated Life-Cycle Analysis procedure and Environmental Impact Assessment were also discussed in this work. The scope of this thesis is to illustrate that Life Cycle Cost analysis as part of Life Cycle Assessment approach could be effectively used to drive the design and management strategy of new and existing structures. The final objective of this contribution is to show how an economic analysis can influence decision-making in the definition of the most sustainable design alternatives. The designers can monitor the economic impact of different design strategies in order to identify the most appropriate option.

The secret life of software applications

One of the most undervalued problems by smartphone users is the security of data on their mobile devices. Today smartphones and tablets are used to send messages and photos and especially to stay connected with social networks, forums and other platforms. These devices contain a lot of private information like passwords, phone numbers, private photos, emails, etc. and an attacker may choose to steal or destroy this information. The main topic of this thesis is the security of the applications present on the most popular stores (App Store for iOS and Play Store for Android) and of their mechanisms for the management of security. The analysis is focused on how the architecture of the two systems protects users from threats and highlights the real presence of malware and spyware in their respective application stores. The work described in subsequent chapters explains the study of the behavior of 50 Android applications and 50 iOS applications performed using network analysis software. Furthermore, this thesis presents some statistics about malware and spyware present on the respective stores and the permissions they require. At the end the reader will be able to understand how to recognize malicious applications and which of the two systems is more suitable for him. This is how this thesis is structured. The first chapter introduces the security mechanisms of the Android and iOS platform architectures and the security mechanisms of their respective application stores. The Second chapter explains the work done, what, why and how we have chosen the tools needed to complete our analysis. The third chapter discusses about the execution of tests, the protocol followed and the approach to assess the ���level of danger��� of each application that has been checked. The fourth chapter explains the results of the tests and introduces some statistics on the presence of malicious applications on Play Store and App Store. The fifth chapter is devoted to the study of the users, what they think about and how they might avoid malicious applications. The sixth chapter seeks to establish, following our methodology, what application store is safer. In the end, the seventh chapter concludes the thesis.

A daily perspective on work interruptions

Diese Dissertation basiert auf einem theoretischen Artikel und zwei empirischen Studien.rnrnDer theoretische Artikel: Es wird ein theoretisches Rahmenmodell postuliert, welches die Kumulierung von Arbeitsunterbrechung und deren Effekte untersucht. Die meisten bisherigen Studien haben Unterbrechungen als isoliertes Ph��nomen betrachtet und dabei unber��cksichtigt gelassen, dass w��hrend eines typischen Arbeitstages mehrere Unterbrechungen gleichzeitig (oder aufeinanderfolgend) auftreten. In der vorliegenden Dissertation wird diese L��cke gef��llt, indem der Prozess der kumulierenden Unterbrechungen untersucht wird. Es wird beschrieben,rninwieweit die Kumulation von Unterbrechungen zu einer neuen Qualit��t vonrn(negativen) Effekten f��hrt. Das Zusammenspiel und die gegenseitige Verst��rkung einzelner Effekte werden dargestellt und moderierende und mediierende Faktoren aufgezeigt. Auf diese Weise ist es m��glich, eine Verbindung zwischen kurzfristigen Effekten einzelner Unterbrechungen und Gesundheitsbeeintr��chtigungen durch die Arbeitsbedingung ���Unterbrechungen���rnherzustellen.rnrnStudie 1: In dieser Studie wurde untersucht, inwieweit Unterbrechungen Leistung und Wohlbefinden einer Person innerhalb eines Arbeitstages beeinflussen. Es wurde postuliert, dass das Auftreten von Unterbrechungen die Zufriedenheit mit der eigenen Leistung vermindert und das Vergessen von Intentionen und das Irritationserleben verst��rkt. Geistige Anforderung und Zeitdruck galten hierbei als Mediatoren. Um dies zu testen, wurden 133 Pflegekr��ften ��ber 5 Tage hinweg mittels Smartphones befragt. Mehrebenenanalysen konnten die Haupteffekte best��tigen. Die vermuteten Mediationseffekte wurden f��r Irritation und (teilweise) f��r Zufriedenheit mit der Leistung best��tigt, nicht jedoch f��r Vergessen von Intentionen. Unterbrechungen f��hren demzufolge (u.a.) zu negativen Effekten, da sie kognitiv anspruchsvoll sind und Zeit beanspruchen.rnrnStudie 2: In dieser Studie wurden Zusammenh��nge zwischen kognitiven Stressorenrn(Arbeitsunterbrechungen und Multitasking) und Beanspruchungsfolgen (Stimmung und Irritation) innerhalb eines Arbeitstages gemessen. Es wurde angenommen, dass diese Zusammenh��nge durch chronologisches Alter und Indikatoren funktionalen Alters (Arbeitsged��chtniskapazit��t und Aufmerksamkeit) moderiert wird. ��ltere mit schlechteren Aufmerksamkeitsund Arbeitsged��chtnisleistungen sollten am st��rksten durch die untersuchten Stressoren beeintr��chtigt werden. Es wurde eine Tagebuchstudie (siehe Studie 1) und computergest��tzternkognitive Leistungstests durchgef��hrt. Mehrebenenanalysen konnten die Haupteffekte f��r die abh��ngigen Variablen Stimmung (Valenz und Wachheit) und Irritation best��tigen, nicht jedoch f��r Erregung (Stimmung). Dreifachinteraktionen wurden nicht in der postulierten Richtung gefunden. J��ngere, nicht ��ltere profitierten von einem hohen basalen kognitivenrnLeistungsverm��gen. ��ltere scheinen Copingstrategien zu besitzen, die m��gliche kognitive Verluste ausgleichen. rnrnIm Allgemeinen konnten die (getesteten) Annahmen des theoretischen Rahmenmodellsrnbest��tigt werden. Prinzipiell scheint es m��glich, Ergebnisse der Laborforschung auf die Feldforschung zu ��bertragen, jedoch ist es notwendig die Besonderheiten des Feldes zu ber��cksichtigen. Die postulieren Mediationseffekte (Studie 1) wurden (teilweise) best��tigt. Die Ergebnisse weisen jedoch darauf hin, dass der volle Arbeitstag untersucht werden muss und dass sehr spezifische abh��ngige Variablen auch spezifischere Mediatoren ben��tigen. Des Weiteren konnte in Studie 2 best��tigt werden, dass die kognitive Kapazit��t eine bedeutsamernRessource im Umgang mit Unterbrechungen ist, im Arbeitskontext jedoch auch andere Ressourcen wirken.

Measurement of LSP-induced residual stresses and fatigue life on thin-walled aluminium alloys specimens

This thesis work encloses activities carried out in the Laser Center of the Polytechnic University of Madrid and the laboratories of the University of Bologna in Forl��. This thesis focuses on the superficial mechanical treatment for metallic materials called Laser Shock Peening (LSP). This process is a surface enhancement treatment which induces a significant layer of beneficial compressive residual stresses underneath the surface of metal components in order to improve the detrimental effects of the crack growth behavior rate in it. The innovation aspect of this work is the LSP application to specimens with extremely low thickness. In particular, after a bibliographic study and comparison with the main treatments used for the same purposes, this work analyzes the physics of the operation of a laser, its interaction with the surface of the material and the generation of the surface residual stresses which are fundamentals to obtain the LSP benefits. In particular this thesis work regards the application of this treatment to some Al2024-T351 specimens with low thickness. Among the improvements that can be obtained performing this operation, the most important in the aeronautic field is the fatigue life improvement of the treated components. As demonstrated in this work, a well-done LSP treatment can slow down the progress of the defects in the material that could lead to sudden failure of the structure. A part of this thesis is the simulation of this phenomenon using the program AFGROW, with which have been analyzed different geometric configurations of the treatment, verifying which was better for large panels of typical aeronautical interest. The core of the LSP process are the residual stresses that are induced on the material by the interaction with the laser light, these can be simulated with the finite elements but it is essential to verify and measure them experimentally. In the thesis are introduced the main methods for the detection of those stresses, they can be mechanical or by diffraction. In particular, will be described the principles and the detailed realization method of the Hole Drilling measure and an introduction of the X-ray Diffraction; then will be presented the results I obtained with both techniques. In addition to these two measurement techniques will also be introduced Neutron Diffraction method. The last part refers to the experimental tests of the fatigue life of the specimens, with a detailed description of the apparatus and the procedure used from the initial specimen preparation to the fatigue test with the press. Then the obtained results are exposed and discussed.

Recycling of end of life concrete fines (0 - 4 mm) into silica and cement

The purpose of this work is to find a methodology in order to make possible the recycling of fines (0 - 4 mm) in the Construction and Demolition Waste (CDW) process. At the moment this fraction is a not desired by-product: it has high contaminant content, it has to be separated from the coarse fraction, because of its high water absorption which can affect the properties of the concrete. In fact, in some countries the use of fines recycled aggregates is highly restricted or even banned. This work is placed inside the European project C2CA (from Concrete to Cement and Clean Aggregates) and it has been held in the Faculty of Civil Engineering and Geosciences of the Technical University of Delft, in particular, in the laboratory of Resources And Recycling. This research proposes some procedures in order to close the loop of the entire recycling process. After the classification done by ADR (Advanced Dry Recovery) the two fractions "airknife" and "rotor" (that together constitute the fraction 0 - 4 mm) are inserted in a new machine that works at high temperatures. The temperatures analysed in this research are 600 ��C and 750 ��C, cause at that temperature it is supposed that the cement bounds become very weak. The final goal is "to clean" the coarse fraction (0,250 - 4 mm) from the cement still attached to the sand and try to concentrate the cement paste in the fraction 0 - 0,250 mm. This new set-up is able to dry the material in very few seconds, divide it into two fractions (the coarse one and the fine one) thanks to the air and increase the amount of fines (0 - 0,250 mm) promoting the attrition between the particles through a vibration device. The coarse fraction is then processed in a ball mill in order to improve the result and reach the final goal. Thanks to the high temperature it is possible to markedly reduce the milling time. The sand 0 - 2 mm, after being heated and milled is used to replace 100% of norm sand in mortar production. The results are very promising: the mortar made with recycled sand reaches an early strength, in fact the increment with respect to the mortar made with norm sand is 20% after three days and 7% after seven days. With this research it has been demonstrated that once the temperature is increased it is possible to obtain a clean coarse fraction (0,250 - 4 mm), free from cement paste that is concentrated in the fine fraction 0 - 0,250 mm. The milling time and the drying time can be largely reduced. The recycled sand shows better performance in terms of mechanical properties with respect to the natural one.

The Body of Margaret Atwood: Sex Work and Prostitution within Margaret Atwood's The Handmaid's Tale, Oryx and Crake, and The Year of the Flood

In this paper, I will argue that Canadian author Margaret Atwood uses fiscal and socially conservative dystopias to show how sex work and prostitution are choices that women would never have to make in a world with true gender equality. In these radically different worlds, women have no agency beyond their sexuality and no ability to express themselves as equals within either society. And while the structures of both societies, the society of The Handmaid���s Tale and that of both Oryx and Crake and The Year of the Flood, are inherently different, they both stem from modern conservative philosophies: for example, the country of Gilead in The Handmaid���s Tale holds Christian conservative beliefs on the role of religion in the state and the culturally designated roles of women. I define social conservatism as the idea that government organizations are used to pursue an agenda promoting traditional religious values such as ���public morality��� and opposing ���immoralities��� such as abortion, prostitution, and homosexuality. I define fiscal conservatism as an agenda promoting privatization of the market, deregulation and lower taxes. In this paper I argue that because these philosophies are incompatible with gender equality, they drive women to occupations such as sex work. Women find that they have no choices and sex work provides something to ���trade.��� For Offred, this ���trading��� is more limited, because she is a sex slave. For Oryx, this trading allows her to travel to the West, yet not before her childhood is marked by prostitution and pornography. Sex work allows for Ren to reclaim some agency over her life, yet she only chooses sex work because she is presented with few other options. All of these issues stem from the philosophies that define these dystopias.